subcategories
(3rd category level)
Manufacturer:
(Category: 703)
We are selling here a frozen meat slicer from the manufacturer FMS GmbH in a very good used and functional condition. The machine runs on 400 volts, completely stainless steel, rollable, passage 38 cm wide, for chopping frozen meat, workshop tested, dimensions W/D/H 70/95/90 cm, others on request.
We are selling here a vacuum sealer from the manufacturer Vama, type VP 900 in a very good used and functional condition. The device was built in 2012, runs on 400 volts, 5 kW, 160 pump, with gassing, welding bar right/left, chamber size 53/53/17 cm, rollable, workshop tested, immediately ready for use, dimensions W/D/H 85/75/95 cm, others on request.
We are selling here a belt descaler from the manufacturer Maja, type ESB 441 in a good used and functional condition. Runs on 400 volts, bandwidth 37 cm, completely stainless steel, rollable, workshop tested, ready for immediate use, dimensions W/D/H 65/90/115 cm, others on request.
Manufacturer: Handtmann Intestinal Holding Device Type 60-6 ( for long filling tube ) for filling machine HANDTMANN VF 50, 80, 100, 200, 300 i all VF 600 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60
REF-2049 BIZERBA A 404 FB AUTOMATIC SLICER Automatic slicer manufactured by Bizerba Machine number: 10597824 Model: A 404 FB Year: 2009 30-55 strokes/min Slice thickness: 0.5-12 mm Cutting carriage: 400 mm Overall dimensions: 1,560 mm length, 1,000 mm width, 1,540 mm height
REF-2368 HOBART CNA-L CONVEYOR RACK-TYPE DISHWASHER Conveyorized rack-type dishwasher. Manufacturer: HOBART. Model: CNA-L. Serial no.: 86463655. Year: 2007. 26.30 kW/50.30 A. 380-415 V/50 Hz/3-phase. Throughput: 180 racks/3,240 plates per hour (120 racks according to DIN 10510). Complete with HOBART heat pump. Pump model: CHP 18. Serial no.: 692. Year: 2007. Refrigerant type: R134a (capacity 3.2 kg). Maximum pressure: high side 28 bar; low side 8 bar. Compressor: maximum flow rate 17 m3/h; 2,900 rpm. Inside dimensions: width 510 mm, height 460 mm. Overall dimensions: length 3,200 mm, width 800 mm, height 2,150 mm. With large” high-performance pre-wash zone, as well as washing, rinsing and drying zones. Made of high-grade stainless steel. SMARTRONIC electronic control. Including 2 speeds, emergency stop and main switch. Efficient dual-rinse system. In-buil ...
Used Alpina clipping machine type DKF 18.15. Technical data: Voltage 380 V Number of phases 3 Frequency 50 Hz Pressure 8 bar
Risco RS1040 MAS Vacuum stuffer Serial: A003004 Stainless, 50L agitated hopper, variable speed, portions from 5 to 10000g, 2.3KW, with manual, 3Ph
REF-2574 FAC PR-2 RECTANGULAR 2D SHAPING PRESS FOR BONELESS CURED HAM Two-dimensional press for shaping boneless cured hams into rectangular blocks. Manufacturer: FAC Model: PR-2 Serial no.: 28120-011 Year: 2007 Voltage/Frequence: 400 V/50 Hz Power: 4 kW Air pressure: 4-6 bar Hydraulic pressure: 160 bar Output: 60-240 pcs/hour Overall dimensions: width 1,660 mm, length 1,600 mm, height 2,060 mm Weight: approx. 2,400 kg All AISI 304 stainless steel. Rectangular moulds also made of stainless steel. Counter-moulds made of technical plastic. Hydraulic operation. 2D cyclical massaging and pressing system by means of a vertical and a horizontal cylinder. Adjustable massaging and pressing time. The cylinders compress the ham against the mould in sequential cycles of pressing and pause, thus obtaining a uniform product suitable for the subsequent slicing.
REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm
Bacon Cutter Treif Felix 100 CE Stainless Steel, 400 V, 3 A, 1.0 kW, 173.5 kg, shelf PE, feed chute 30x10x10 cm, phase turner, rotating field detection, 1 gate set, 1 spare knife, total dimensions 95x75x105 cm, bacon, ham, sausage and other types of meat can be cut just as easily as cheese, fish, fruit and vegetables, capacity approx. 800 kg / h, year of construction 2009
Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph
Weber ASE 553 skinning machine, with compressed air connection, some bearings and seals replaced, Connection 400V, dimensions LxWxH approx. 60x57x102cm, weight approx. 175kg, very good used condition, fully functional
Baader IS069 Descaling machine Serial: 5306907 2023, Stainless de-scaler, variable speed, up to 100 fish per min, 0.4 - 3Kg, 3.0Kw, overall length 1850mm, mobile, 3Ph
Kaj Olesen TWP54 Pin Bone remover Serial: 10810 2019, stainless pin bone remover, capacity up to 350 - 700Kgs per hour, belt dimensions 1650mm x 350mm, 1Ph
Type: IQ3 Serial number: MD301-12330D Year of construction: 2010 Belt width: 295 mm Passage: 350 x 110 mm Compressed air: 6 Bar Power: 3 x 415V, 50Hz, 1.2A Dimensions: 1850 x 1050 x 1200 mm With pneumatic reject
Type: IQ3+ Serial number: DMC080228-07625D Year of construction: 2008 Belt width: 600 mm Passage: 640 x 100 mm Power: 3 x 380V, 50Hz, 1.2A Dimensions: 1800 x 1200 x 1300 mm
Type: TGR103 Serial number: 700292 Year of construction: 2020, never used! Hole plate diameter: Unger, H82 3-piece Hopper: 6 litres Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 500 x 500 x 500 mm Weight: 61 kg With built-in compressor to cool hopper Machine is never used, new out of the box
1. Forming machine: ALCO / JBT AFM 400 PC The ALCO / JBT AFM 400 PC Forming Machine is a high-performance machine designed to form food products of various shapes and sizes. Thanks to a precise pressure system, the machine can mold raw meat, fish, vegetable and other food masses into molds of attractive 2D and 3D shapes. Tank capacity: 270 liters, which allows for long production cycles without the need for frequent filling. Die width: 400 mm, with the ability to custom design die shapes. Maximum volume per stroke: ± 1.47 kg, enabling production of large portions in a short time. Maximum number of strokes: 50 per minute, which translates into high productivity. Materials: made entirely of stainless steel for durability and easy cleaning. Dimensions: ± 2800 x 900 x 2100 mm, making the machine compact and easy to integrate with other components of the production line. Weight: 1 ...
Type: TBS19KT Serial number: 700045 Year of construction: 2019, never used Cutting height: max 230 mm Cutting width: max 190 mm Saw blade: 1750 x 16 x 0.45 mm Saw speed: 17 m/sec Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 490 x 620 x 1000 mm Weight: 87 kg Machine never used, new out of the box
Type: TG105 Serial number: 603429 Year of construction: 2018, never used Hole plate diameter: Enterprise E32 Hopper: 42 litres Power: 3 x 220V, 50Hz, 2.2kW Dimensions: 700 x 580 x 490 mm Weight: 62 kg Never used, new out of the box
Type: TG101 Serial number: 700261 Year of construction: 2020, never used! Hole plate diameter: Enterprise E22 Hopper: 6 litres Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 370 x 350 x 430 mm Weight: 39 kg Machine never used, new out of the box
Type: EFR2000/450 Serial number: 1713 Year of construction: 2008 Belt width: 450 mm Frying length: 2000 mm Frying time: 25 - 250 sec Heating: electric, 95 kW Power: 3 x 400V, 50Hz, 102kW Dimensions: 4950 x 2100 x 3600 mm Weight: 1900 kg Teflon infeed, hold down belt, sediment removal, electric hoists, circulation pump, oil level control Prepared for CO² fire extinguisher Separate infeed conveyor
Product number: 3118 Type: Gemini XL Serial number: 1042-5357 Year of construction: 2012 Chamber: 775 x 770 x 220 mm Seal bar: 770 mm Vacuum pump: Busch, 300 m³/h\ Power: 3 x 400V, 50Hz, 9kW Dimensions: 1100 x 1900 x 1200 mm Weight: 600 kg
Product number: 3117 Type: Titaan 2-90 Serial number: HTN101 Year of construction: 2015 Chamber size: 840 x 890 x 220 mm Seal bar: 2 x 840 mm Outfeed belt: 790 mm Cycle time: 30 - 50 sec Compressed air: 6 Bar, 100 l/min. Power: 3 x 400V, 50Hz, 7kW Dimensions: 1200 x 2500 x 1400 mm Weight: 850 kg Automatic vacuum machine with outfeed belts Machine used on central vacuum system
Laska mobile micro cutter -Model: FZ 225 -Power: 132 kW -Dimensions: 2220 x 1170 x 1280 mm -Set diameter: 225 mm -Hopper capacity: 200 L -Weight: 1500 kg -Power supply: 400 V 50 Hz 3N -Cutting set and additional parts included -Stock quantity: 1 -Condition: used
Handtmann vacuum filler -Type: VF 50 -Capacity: up to 2600 kg/h -Basket capacity: 50 liters -Filling pressure: up to 55 bar -Portioning speed up to 420 portions/min with a tolerance of 10% -Portion range: 5-100,000 gr. -Power: 4 kW -Electric power supply: 400V 50HZ 3N -Sample machine performance table for portioning and wrapping: 25g - 420 portions/min 50g - 350 portions/min 100g - 250 portions/min 200g - 160 portions/min -Net weight: 660 kg -External dimensions: 900 x 580 x 1720 mm -Made of stainless steel -Stock: 1 piece -Condition: Used Clipper Technopack -Type: KDCV 70 -Power: 0.1 kW -Dimensions: 1250 x 600 x 1850 mm -Weight: 118 kg -For all covers: plastic, fibrous, collagen and natural -Mobile machine on a trolley -In set funnel 22 mm -Stock quantity: 1 -Condition:Used
Karpowicz injector -Type: NK-27 -Power: 7.5 kW -Capacity: up to 1500 kg/h -Power supply: 400V 50Hz 3N -Belt width: 400 mm -Needle diameter: 2 mm -Number of needles: 27 -Dimensions: 1800 x 880 x 2100 mm -Weight: 300 kg -Made of acid-resistant steel -Quantity in stock: 1 -Condition: used/overhauled
Grinder Laska -Model: WW 130-2 -Power: 10/13 kW -Efficiency: up to 5000 kg/h -Capacity: 175 L -Throat diameter: 130 mm -Power supply: 400 V 50 Hz 3N -Dimensions: 1300 x 1160 x 1450 mm -Weight: 535 kg -Quantity in stock: 1 -Condition: used in good condition
Vacuum filler Vemag -Model: Robot DP10C -Power: 15 kW -Capacity: 6000 kg/h -Portion range: from 5 to 60,000 g -Hopper capacity: 250 L -Power supply: 380V, 50Hz -Vacuum pump: 20 m3/h -Made of stainless steel -Dimensions: 2450 x 1350 x 2200 -Weight: 1300 kg -Quantity in stock: 1 -Condition: used
GEWS Investitionsgüter Schettler e.K.
