subcategories
(3rd category level)
Manufacturer:
(Category: 703)
2x pieces of Unused Endress+Hauser PMP75 Pressure Transmitters., Order code: PMP75-3EX77/0, MWP 0.1/10 bar, p -1 ...10 bar, Mat. 1.4435/316L, Will be sold as a set only., Type of Machine: Pressure Transmitter
We are selling here a skinning fleece from the manufacturer Maja, type EVM 437 in a very good used and functional condition. Runs on 400 volts, cutting width 43 cm, completely stainless steel, rollable, workshop tested, ready for immediate use, dimensions W/D/H 70/70/100 cm, others on request.
Height 1550 mm Width 2950 mm Length 1750 mm Weight 4100 kg Capacity 200 l Electrical Supply: 400V 50Hz 3N Total power 78 kW Main Material Stainless Steel, Acid Resistant Cutter type Vacuum bowl cutter Construction of the cutter bowl Stainless steel, acid-resistant Number of knives on the head 8 pcs. Vacuum cutter. Additional functions for heating or cooling the bowl
Height 3060 mm Width 470 mm Length 2050 mm Electrical Supply: 400V 50Hz 3N Total power 0.5 kW Main Material Stainless Steel, Acid Resistant
Height 2260 mm Width 1430 mm Length 2130 mm Weight 1400 kg Capacity 530 l Electrical Supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless Steel, Acid Resistant Agitator Type Paddle Agitators Load 350 kg Product ejection Manually opened flaps, front Loading Pole loading, freestanding Stirrer type Open stirrer Number of shafts Single shaft Comes with a loading column for 200 L battlements.
Height 1940 mm Width 1100 mm Length 2200 mm Electrical Supply: 400V 50Hz 3N Total power 22 kW Main Material Stainless Steel, Acid Resistant No loading, possibility to buy additional pole loading for the machine Throat diameter 180 mm Wolf type Straight wolf Auger Stuffing Feeding System Hopper Throat Workmanship Stainless Steel Material of the feeding screw Stainless steel, acid-resistant
PVS natural casing welding devices replace the knotting of the sausage ends or the closure of the sausages with a clip The system is suitable for natural casings, sheep casings and pig casings. The advantage to conventional applications is that there is no need to remove knots or clips before packing
A complete Maja derinding line for chops with defatting machine, derinding machine and photo detection is available. 1) Derinding machine Maja BXA 434, year of manufacture: 2008, cutting width: 434mm, infeed depth: 385mm, clearance and belt width: 443mm, machine dimensions X/Y/Z: approx. 1950mm/1000mm/1250mm, weight: approx. 350kg. 2) Defatting machine Maja BXM 434 Loin, year of manufacture: 2010, max. feed speed: 25m/min, machine dimensions X/Y/Z: approx. 1000mm/900mm/1250mm, weight: approx. 375kg. 3) Fat-lean analysis system Maja BFE 1-K, year of manufacture: 2010. Documentation available. An on-site inspection is possible.
Cutter Manufacturer: Mado Model: Supra 50 Capacity: 50 liters Bowl and bowl- cover are completely out of stainless steel Noise reduction cover Electric control cabinet integrated Variable knife speed up to 5000 rpm 2 bowl speeds 9/18 rpm Mixing speeds: forwards and reverse Knife head with 6 knives
Quiel AAGS Filling Line for Pieces of Meat/Gyros/Gullasch For sale is a filling line from the manufacturer Quiel, model AAGS, specially developed for the processing and filling of pieces of meat Operation of the system: The meat to be processed is filled into the storage container using a lifting and tilting device. There it is continuously moved by the mixing device and then transported to the dosing belts via screw conveyors at the bottom of the container. A squeegee ensures an even distribution of the product on the belts. At the end of the dosing section, the meat falls through discharge chutes into the trays or containers below. The dosing time can be set individually, which allows the portioning to be precisely controlled. If a single portion does not reach the desired amount, the control system allows for a double ejection, in which two portions are filled into the same cont ...
Meat grinder Kolbe SW 114 / II, stuffed grinder, Year of manufacture 2014, completely in stainless steel, 2 speeds, Connection 400 V, 9.5 kW, dimensions LxWxH approx. 110x68x108cm, weight approx. 380kg, very good used condition, fully functional
Cutter Mado MSM 764 SL, 50 litre bowl, completely in stainless steel, built in 2014, Stepless knife shaft up to 5000 rpm, mixing cycles, 2 bowl speeds, 3 cutter head, connection 400 V, 32 kW, Dimensions LxWxH approx. 125x100x115cm, weight approx. 768kg, very good used condition, fully functional
Band Saw Bizerba FK 23, completely in stainless steel, with portioning stop, brake, year of construction 2004, including 3 new saw blades, new scrapers, Connection 400V, dimensions LxWxH approx. 50x57x86cm, weight approx. 75kg, used, good condition, fully functional
Meat grinder Manufacturer: CFS Model: Freshgrind 200 Electric power: 52.4 kW Voltage: 400V / 50Hz Diameter: 200mm Hopper volume: 400 liters Dimensions: 2700x1650x2780mm
I am selling an angle meat slicer Seydelmann AE 130. Year of manufacture 2004. UNGER 5 system Two cutting speeds, two feeding speeds Power 20 kW Machine in original condition, fully functional. Possibility of transportation and installation of the device by an external service company. Very good condition. Price negotiable.
Used Lagarde autoclave. New: 1978. Capacity: 4693 dm³. Vessel diameter: 1200 mm. Operating pressure: 5 bar. Maximum pressure: 7.5 bar. Maximum operating temperature: 151°C.
Height=1.78 m, Overall length= 1.15 m, Overall width= 1.18 m, Net weight= 552 kg,
Height=1.63 m, Overall length= 0.96 m, Overall width= 1.06 m, Net weight= 329 kg,
Height=1.49 m, Overall length= 1 m, Overall width= 2.27 m, Net weight= 573 kg,
The HTST (High-Temperature Short-Time) pasteuriser from Dairy Machinery UK is designed to provide efficient pasteurization of liquid dairy products while preserving their quality and safety. Here are some key features:, - Process Efficiency: HTST pasteurisation involves heating the dairy product to a high temperature (typically around 72°C and other temperatures on request ) for a short time (15-30 seconds and other timings on request ), which kills harmful bacteria and extends shelf life., - Quality Preservation: This method retains the taste and nutritional value of the dairy products better than traditional pasteurization methods, minimizing the impact on flavor and color., - Automated Control: Many HTST systems come with automated controls that monitor temperatures and flow rates, ensuring consistent pasteurisation and reducing human error., - Compliance Standards: Designed to meet ...
REF-2563 METTLER TOLEDO SAFELINE METAL DETECTOR WITH REJECT SYSTEM Model: Signature. Year: 1999. Aperture: width 500 mm, height 350 mm. Overall dimensions: width 1,500 mm, length 3,200 mm, height 1,250 mm. OTHER SAFELINE MODELS ARE ALSO AVAILABLE. INQUIRE FOR MORE INFORMATION.
130 litre ALPINA SWOPPER SW 130-S checked function, loader,unloader
SEYDELMANN KontiKutter KK 140 AC6, in very good condition
Vakona ESK 850 STL-B incl. loading, top condition
