subcategories
(3rd category level)
Manufacturer:
(Category: 703)
Including continuous belt washer, Belt width: 600 mm, Tiers: 2 x 4 pc., Belt length: 60 m, Product gap: 130 mm, Retention time: 2.9 - 29 min, Steam: NW40, 4 - 8 Bar, Exhaust: 2 x 2000 m³/h, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 27kW, Dimensions: 9200 x 3900 x 4700 mm, Weight: 13500 kg
Belt width: 600 mm, Power: 3 x 380V, 50Hz, 5.7kW, Dimensions: 3300 x 1000 x 1700 mm, Weight: 750 kg
Belt width: 630 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 4400 x 1750 x 2250 mm, Weight: 1600 kg
Belt width: 600 mm, Power: 3 x 400V, 50Hz, 2.5kW, Dimensions: 3000 x 1700 x 2100 mm, Weight: 1025 kg
Hold down belt, sediment removal, circulation pump, manual hoists, Belt width: 600 mm, Frying length: 3000 mm, Heating: electric, 80kW, Power: 3 x 400V, 50Hz, 90kW, Dimensions: 5400 x 1750 x 2800 mm
Teflon infeed, hold down belt, sediment removal, electric hoists, circulation pump, oil level indicator, CIP, Belt width: 630 mm, Frying length: 4000 mm, Heating: thermal oil, 232kW, Oil capacity: +/- 1100 litres, 20 mm above belt, Compressed air: 6 - 8 Bar, 0.5 Nm³/h, Power: 3 x 400V, 50Hz, 10.5kW, Dimensions: 6850 x 2100 x 2800 mm, Weight: 4200 kg
Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, prepared for CO2 fire extinguisher, Belt width: 600 mm, Frying length: 6000 mm, Heating: thermal oil, 388 kW, Oil volume: +/- 1250 litre, Frying time: 25 - 250 sec, Power: 3 x 415V, 50Hz, 8kW, Dimensions: 8950 x 2050 x 3900 mm, Weight: 4250 kg
With belt washer and CIP system, Belt width: 400 mm, Tiers: 2 x 4 pc., Belt length: 44 m, Product gap: 130 mm, Retention time: 2.5 - 75 min, Temperature: max 200°C, Heating: thermal oil, 300kW, Exhaust: 2 x 2000 m³/h, Steam: NW40, 4 - 8 Bar, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 35kW, Dimensions: 8250 x 3150 x 4250 mm, Weight: 12000 kg
For cooking, steaming and grilling., With Novatech dewpoint control, belt washer and CIP, Model: Right hand execution, Belt width: 600 mm, Belt length: 96 m, Tiers: 2 x 4 pc, Heating: thermal oil, 400 kW at 180°C, Steam: max 1500 kg/h, Exhaust: Ø 252 mm, 1000 m³/h, Compressed air: 6 - 8 Bar, Cold water: 1 - 20°C, 3 m³/h, Hot water: 20 - 60°C, 4 m³/h, Power: 3 x 400V, 50Hz, 40kW, Dimensions: 11040 x 4000 x 4975 mm, Weight: 20000 kg
Fully overhauled, including new controls., Belt width: 600 mm, Belt speed: 1.5 - 15 m/min, Filling level: minimal 15 litres, Power: 3 x 380V, 50Hz, 0.61kW, Dimensions: 1400 x 900 x 1750 mm, Weight: 145 kg
Refrigerant: R404A, Compressor: Danfoss Optyma, Power: 3 x 400V, 50Hz, 3.9kW, Dimensions: 800 x 1200 x 1500 mm
Refrigerant: NH3, R717, Compressor: GEA Grasso PR-P55S-28, Flow rate: 966 m3/h, Working pressure: max 21 Bar, Power: 3 x 380V, 60Hz, 162kW, Dimensions: 5000 x 2200 x 2450 mm, Weight: 5400 kg
Belt width: 710 mm, Length: 16000 mm, Refrigerant: N2 (liquid nitrogen), Power: 3 x 400 x 50Hz, 8kW, Dimensions: 17600 x 1500 x 2300 mm
Belt width gross: 1060 mm, Belt width nett: 1015 mm, Tiers: 36 pcs., Product gap: 65 mm, Link height: 80 mm, Belt length: 738 m, Infeed height: 925 mm, Outfeed height: 4120 mm, Refrigerant: NH3/Ammonia, Cooling power: 640 kW, Evaporator: 4000 m2, Power: 3 x 400V, 50Hz, 92kW, Dimensions: 11020 x 8300 x 5100 mm
Including unloader and BW200 loading device, With water counter., Only 3586 hours., Bowl: 325 litres, 2 speeds, Knife speed: 6 steplessly programmable speeds, Mixing: 2 reverse mixing speeds, Controls: Auto-Command 1500K, Vacuum pump: Elmo Rietschle L-BV5, 200 m3/h, Compressed air: 6 - 10 Bar, Water: 4 - 6 Bar, Power: 3 x 400V, 50Hz, 157kW, Dimensions: 2600 x 3650 x 1700 mm, Weight: 4300 kg
Filling, portioning and linking, Including 859 linker and DHV937 casing holder, Only 52 running hours!, Pump capacity: max 2300 kg/hr, Hopper: 105 litre, Vacuum pump: Busch 16 m³/h, Power: 3 x 400V, 50Hz, 5kW, Dimensions: 900 x 1200 x 1950 mm, Weight: 425 kg
With extra infeed conveyor of 1800 mm, Including CIP tank and Bartec hygrophil, Switch cabinet separate, not connected to the machine, With optional outfeed conveyor of 1500 mm, Belt width: 600 mm, Cooking length: 7000 mm, Heating: thermal oil, 180kW, Steam: 4 - 8 Bar, Cooking time: 2 - 40 min, Compressed air: 6 - 10 Bar, Power: 3 x 415V, 50Hz, 13kW, Dimensions: 9800 x 2000 x 3150 mm, Weight: 5850 kg
Block size: max 1200 x 640 x 380 mm, Cutting width: 680 mm, Thickness: 10 - 60 mm, Compressed air: 6 Bar, 500 L/min., Power: 3 x 400V, 50Hz, 15kW, Dimensions: 3400 x 1300 x 2650 mm, Weight: 2500 kg
Including Alpha Machine Vision Solution lid inspection system, Including tool trolley, Capacity: 18000 - 22000 cups/hr, Cups: round Ø 55 mm, round Ø 65 mm, Seal: aluminium, Compressed air: 6 Bar, 800 l/min., Water: 3 Bar, 1.5 l/min., Power: 3 x 400V, 50Hz, 15kW, Dimensions: 4250 x 2000 x 1800 mm, Weight: 3500 kg
Semi-automatic Cutting thickness 0.5 - 8mm, (without offshoots up to 24mm) ideal for meat or sausage/cheese Knife diameter 330mm with automatic acceptance of the section dig. Control Material to be cut: max. 250 x 120 mm
The shredding plant is equipped with two powerful bevel gear motors, delivering a combined total power of 60 kW (2 x 30 kW). The chamber length of the RedUnit XRL is 1600 mm, designed for extensive shredding tasks. With a speed of 42 min⁻¹, the machine operates efficiently and reliably., The power supply is 400 V AC at 50 Hz electrical frequency. The motors are of high quality and lacquered, meeting the latest standards (AGM4606.TF). The operating temperature range is from 0°C to +50°C, so the machine operates reliably under various climatic conditions., MODERN CONTROL AND AUTOMATION:, The crushing system features a fully automatic control with the PCU type SQF0050 and a Performance Control Unit (SQF0060). Operation is via a modern 10-inch touch panel that enables user-friendly operation and intuitive control. The system supports both automatic operation and manual hand operation., ...
- Frozen goods blocks: 800 x 400 x 300 mm, - Target particle size: about 1/3 of the output size, so that the downstream RedUnit XRL260 can process the material, - Throughput: Depending on material between 8-12 t/h
Flow divider: 2 lane, Belt width: 270 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1750 x 1350 x 1900 mm
Never used, new out of the box, Hole plate diameter: Enterprise E32, Hopper: 42 litres, Power: 3 x 220V, 50Hz, 2.2kW, Dimensions: 700 x 580 x 490 mm, Weight: 62 kg
With inspection platform and lifter for 200L tote bins, Hole plate diameter: 160 mm, Mixer: 1300 litres, max 700 kg, Compressed air: 6 - 10 Bar, Power: 3 x 400V, 50Hz, 45kW, Dimensions: 2400 x 3000 x 3150 mm, Weight: 2250 kg
With built-in compressor to cool hopperMachine is never used, new out of the box, Hole plate diameter: Unger, H82 3-piece, Hopper: 6 litres, Power: 3 x 400V, 50Hz, 1.5kW, Dimensions: 500 x 500 x 500 mm, Weight: 61 kg
Machine never used, new out of the box, Hole plate diameter: Enterprise E22, Hopper: 6 litres, Power: 3 x 400V, 50Hz, 1.5kW, Dimensions: 370 x 350 x 430 mm, Weight: 39 kg
Including:, Lachnit lifter for dolav, Type: 300S, Serial number: 2208, Year of construction: 2006, Load: max 1000 kg, Container: max 1100 x 1200 x 850 mm, Lifting height: 2400 mm left, 2300 mm right, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 2500 x 2200 x 5000 mm, Stainless steel platform, Dimensions: 2400 x 1600 x 2500 mm, Including BES (Bone Elimination System), Hole plate diameter: 250 mm, Power: 3 x 400V, 50Hz, 55kW, Dimensions: 2300 x 1400 x 2450 mm, Weight: 1250 kg
With movable mixing bowl and temperature indicator, Bowl: 320 litres, max 200 kg, Mixing: 2 speeds, Power: 3 x 380V, 50Hz, 12kW, Dimensions: 1800 x 1400 x 2150 mm, Weight: 1350 kg
Mixer cooled with nitrogen injection., Haarslev HF10 feeding screw and pump of 2000 litres with ribbon mixer of 11kW., Haarslev HF300GH grinding head of 300mm of 55kW., Including 2 tool trolleys., Mixer: Double paddle, Capacity: 2000 litres, Hole plate diameter: 300 mm, Infeed height: 2850 mm, Outfeed height: 950 mm, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 88kW, Dimensions: 4950 x 3550 x 3550 mm
