manual used for sale

Code: 0218 Brand: BIESSE Model: ROVER 18 - CE Standard CNC working center with 3 controlled axis - CE Standard Technical data: Working range X axis mm 2310 mm - Y axis mm 710 - stroke Z axis mm 90 N ° 6 worktables Boring unit composed of n° 12 vertical spindles - n° 4 horizontal spindles - Motor power Hp 2,3 Router HSD Hp 5 - Max speed 24.000 rpm Bevel gearbox unit Vacuum pump 40 m3/hour Working pressure 6 bar Installed electric power 10 Kw Suction port diameter mm 200 Numerical control CNI NC481: Monitor 9 " Multiscreen: a special softkey is constantly enabled to allow the passage of the AUTOMATIC or MANUAL operating environment, to the PUBLISHING environment for writing and editing of the programs, while the machine works, all the programming operations , insertion and modification of tool data can be performed , total graphics, PLC debugging Programming: t ...

Professional packaging machine from a renowned European manufacturer, which is equipped with many options and adjustment options. Suitable, for example, for packaging foodstuffs (baked goods, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. Functions: -Automatic mode / manual operation selectable. The packaging process can be started via several options. Manual via hand button or alternatively foot switch. Automatically by time input of intervals in which the shrink hood automatically lowers. -Automatic product ejection through the outfeed conveyor. -Automatic rewinding of residual foil possible. Settings: CPSW0U08R -Only "welding" or alternatively "welding and subsequent shrinking". -Welding time adjustable. -Shrink temperature adjustable. -Shrinkage time adjustable. -Holding time adjustabl ...

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 130 mm throat: 200 mm dayligth: 310 mm working feed: 7,0 mm/sec return speed: 50,0 mm/sec Control: konv. work height max.: 905 mm table width: 180 mm oil volume: 250 Liter total power requirement: 7,5 kW weight: 7800 kg range L-W-H: 3500 x 1700 x 2280 mm Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) including analogue depth display - manual backgauge, with analogue position display adjustable from the front on ball screws 2x manually adjustable stop fingers - Manual (jog mode) and automatic cycle selectable - split deer foot upper tool (segmented) - 2x reversible MULTI V die blocks - 1x freely movable foot control Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?m ...

: neu : ca. 4 Monate ab Auftragse : Italien : 38200 € : 771.64 € : 70 to : 500 mm : 700x350 mm : 700x500 mm : 500 mm : 24 mm/s : 5 mm/s : 4 kW : 1500 mm : 1000 mm : 2500 mm : 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 82000 € : 1640 € : 200 to : 500 mm : 870x500 mm : 1000x600 mm : 500 mm : 21 mm/s : 3 mm/s : 7.5 kW : 2300 mm : 1500 mm : 3000 mm : 8200 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 74800 € : 1496 € : 100 to : 500 mm : 1000x800 mm : 600 mm : 26 mm/s : 5 mm/s : 4 kW : 1260 mm : 1060 mm : 2400 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - the so ...

: neu : ca. 4 Monate ab Auftragse : Italien : 63500 € : 1270 € : 70 to : 500 mm : 900x700 mm : 600 mm : 25 mm/s : 6 mm/s : 4 kW : 1140 mm : 940 mm : 235 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - the softwa ...

: neu : ca. 4 Monate ab Auftragse : Italien : 35400 € : 715.08 € : 40 to : 500 mm : 700x350 mm : 700x500 mm : 500 mm : 26 mm/s : 9 mm/s : 4 kW : 1500 mm : 1000 mm : 2500 mm : 1500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Stroke counter € 400,- Decompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € 900, ...

: neu : ca. 4 Monate ab Auftragse : Italien : 120000 € : 300 to : 500 mm : 1000x500 mm : 1200x800 mm : 600 mm : 22 mm/s : 2 mm/s : 7.5 kW : 2300 mm : 1500 mm : 3100 mm : 11200 kg 4-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressur ...

: neu : ca. 4 Monate ab Auftragse : Italien : 103500 € : 150 to : 500 mm : 1250x1000 mm : 600 mm : 23 mm/s : 4 mm/s : 5.5 kW : 1520 mm : 1270 mm : 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - the software  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 62500 € : 1250 € : 150 to : 500 mm : 800x400 mm : 900x600 mm : 500 mm : 20 mm/s : 3 mm/s : 4 kW : 2200 mm : 1500 mm : 3000 mm : 5500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with d ...

VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 75 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator while coat ...

VM VG1-VN VOGA MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM It is designed for powder coating applications with frequently color change within the day. Suction is directly from powder coating box that maintains easily fast color change. Equipment is movable. The chassis under the powder box is vibrating with the help of the vibration motor mounted under it. Powder suction tube is specifically designed to fluidize powder coating particles and to send them to the powder gun by help of the injector located at the top of this pipe with maximum efficiency. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 70 Kg VM G01 POWDER COATING GUN AND CONTROLLER VM manual powder coating gun is fully demountable. Ergonomic pistol handle design provides ergonomic use and not tire operator whil ...

thread dia.: M6 - M36 turning speeds: 30 - 150 U/min working area: max. 1200 R angle adjustable from - to: 0 - 90 Grad voltage: 230 V engine output: 1200 W weight: 65,0 kg - Includes quick-change chuck - for using taps - for through and blind holes - Schwenbkare motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - Significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes large radius swivel arm - for easy positioning of the tap on the workpiece - High economic efficiency thanks to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-chang ...

thread dia.: M5 - M24 turning speeds: 70 - 200 U/min working area: max. 1200 R angle adjustable from - to: 0 - 90 Grad voltage: 230 V engine output: 1200 W weight: 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous met ...

dimensions of saw-blade: 250 mm cutting range: 80,0 mm capacity 90 degrees: square: 70 x 70 mm capacity 45 degrees: round: 80,0 mm capacity 45 degrees: square: 60 x 60 mm work height max.: 900 mm saw blade turning speeds: 20 / 40 U/min engine output: 1400 / 2800 U/min. total power requirement: 1,1 kW weight: 175 kg range L-W-H: 550 x 950 x 1800 mm Furnishing : - manual cross-cut/cold circular saw - for cutting profiles, pipes, solid materials - manual vice with star handle - including miter adjustment - ergonomic control handle - Pole-changing drive motor - 1x BEWO feed roller conveyor - Coolant device - Machine base Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9164089 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

Kaiserstüpfler WP Comet Stüpfler 2-row for manual assignment Weight range 40 to 80 grams/piece depending on TA Manual operation Extendable outfeed conveyor Machine mobile with brake DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 650 x 450 x 1230 mm, WxDxH Used machine cleaned and inspected with 6 months warranty Many more bakery machines in stock!

Kaiserstüpfler WP Comet Stüpfler 2-row for manual assignment Weight range 40 to 80 grams/piece depending on TA Manual operation Extendable outfeed conveyor DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 550 x 420 x 530 mm, WxDxH Used machine cleaned and inspected with 6 months warranty Lots of bakery equipment in stock!

Working width: 520 mm; Planing shaft: tersa; Number of knives: 4; Dressing table length: 2720 mm; Dressing table adjustment: lever; Hollow and pointed joint adjustment: no; Display Spahnabnahme: Scala; Hollow and pointed joint display: -; Dressing stop angle adjustable: yes; Engine power: 7 kW; Machine length: 2800 mm; Machine width: 1000mm; Weight: 870 kg; Large dressing tables made of cast iron The dressing table is adjusted by means of a precise parallelogram system, so that the distance between the table tips and the knife shaft remains the same in every adjustment position The large, stable dressing stop made of anodized aluminum is easily movable and can be tilted from 0Â - 45Â The inclination of the stop can be read from the workstation Standard with auxiliary stop Large four-knife shaft, precision-bearing Smooth running thanks to the precision unit and thanks to t ...

Key data: 2500 mm, 1000 mm, 80 mm

Weeke BHX 500 with hedgehog buffer in the inlet Hedgehog buffer with 30 buffer places, length overall: 5700 mm Effective width: 2000 mm Manually movable Weeke machining center with one machining support at the top and one at the bottom Insertion table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS min. workpiece length: 200 mm max. workpiece length: 2500 mm min. workpiece width: 70 mm max. workpiece width: 1000 mm min. workpiece thickness: 4 mm max. workpiece thickness: 80 mm max. workpiece stacking: 2 pcs. Machine Configuration: 2V32 HIGH SPEED 7500 Vertical drilling unit arranged in the upper and lower machining support, each with 32 drilling spindles (individually controllable with variable speed range). 2H8X/2Y Horizontal drilling unit arranged in the upper and lower processing support with 10 over Drill spindles can be called up individu ...

Steam turbine Siemens SST400 Year: 2011 Disassembled and put in a storage. Very low working hours. Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Turbo gear unit Flender-Graffenstaden TX80/3 Transformer Siemens S10-40000/110 Condenser Full set of manual books No boilers, no voltage control cabinet (7) Steam turbine Siemens SST-400 Year: 2011 Never used and never installed. Still in original wooden crates. Packing lists. 7 sets available Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Control system Accessories Full set of manual books No boilers Price: on request

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve -Gate valve: manual gate valve for ventilation duct -Pipe diameter: 300/260 mm, see photos -Number: 2x barrier slide available -Price per piece -Total dimensions: 340/225/H500 mm -Weight: 12.7 kg

Crane fork, loading fork, load fork, pallet fork, pallet crane fork -Manufacturer: REMA, pallet hook with manual balancing -Load capacity: 3000 kg -Tine length: 980 mm -manual weight balancing -Fork: adjustable, 430 to 880 mm -Useable height: 1320 to 2020 mm -Dimension: 1185/930/H1640 mm -Total weight: 270 kg

Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

Automatic Packaging Machine, Seamer SIAT / BRÜNINGHAUS Type SM8.1 Carton Gluing Machine, Carton Gluer, Semi-Automatic Sealing Machine Fabr. No. 15905 Year of construction 1999 Carton length 160 mm -any Carton height 150-500 mm Carton width 130-520 mm Mains connection 400 volts, 50 Hz, 200 watts - Manual crank adjustment of the lateral conveyor belts for the carton width - Carton feed via conveyor belts on the right and left - manual crank height adjustment of the upper gluing station - Glues the bottom of the box and the top of the box with 2 separate parcel tape stations- 2 gluing units for the processing of self-adhesive tape, width 75 mm- Gluing stations for self-adhesive tape (also for large rolls 300 mm) Space requirement L x W x H 950 x 700 x 1200 mm Weight 120 kg good condition; used

sheet width: 4020 mm plate thickness: 1,50 mm distance between columns: mm stroke of upper beam: 250 mm cheek lowering: Oberwange 250 mm angle adjustable from - to: 0-180 Grad total power requirement: kW weight of the machine ca.: 4,86 t dimensions of the machine ca.: 5,185 x 1,220 x 1,425 m - Control POS 400 NC - Piece counter - foot switch - Rail quick clamping system - manual backgauge - 1x set split goat tool set - 1 pc. sharp rail - 2 pcs. bending splints - hydraulic upper tool clamping Optional - manual back gauge 750 mm without support table (new from SCHRÖDER) - if you are interested, please contact us The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Charger (loading and unloading), High: 2,000 mm, Long: 2.700 mm, Width: 2.100 mm, Weight: 6.580 kg, Voltage: 220/380 V, Total power: 28Kw, Accessories included: Feeder / Feeder, Grinding wheel width: 250 mm, Regulating wheel width: 250 mm, Ø min / max to grinding: 3/125 mm, Control type ((cnc / manual): Manual, Maximum infeed grinding length: 250 mm, Regulating wheel dimensions (od x id x width): 350 x 250 x 125 mm, Ø grinding wheel dimensions (od x id x width): 500 x 250 x 304.8mm

sheet width: 3060 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm back stop - adjustable: 5,0 - 1000 mm work height max.: ca. 820 mm cutting angle: 2,4 ° stroke: 7-12 p/min. down holder: 14 Stück operating pressure: 360 bar Control: ELGO oil volume: 200 ltr. voltage: 400 V total power requirement: 22,0 kW weight: 9000 kg range L-W-H: 4000 x 2300 x 2000 mm Furnishing : - robust / hydraulic swing shears - with ELGO digital control - electric backgauge 5.0 - 1,000 mm zero-backlash ball screw for backgauge Backstop beam can be automatically tilted up in max. position Speed 100mm/sec - 1x side stop - 2x front support arms - electrical cutting length limitation Cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment centrally operated on the right side stand - Machine side stand with overhang - Front support plates with ball rollers - ...

bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm bore capacity in cast iron (diameter): 38 mm threading cutting capacity:: M20/M30 drive capacity - spindle motor: 1,9 kW spindle taper MT: 3 turning speed range: 160- 2250 U/min column diameter: 115 mm table surface area: 300 x 300 mm distance spindle /table: 642 mm distance spindle/base plate: 1207 mm dimensions: 0,7 x 0,45 x 1,85 m weight: 260 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used Pillar Drilling Machine in very good condition. - stepless spindle speed - spindle left/right - Manual tapping (manual change direction of rotation) - Manuel Depth gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with manual hydraulics and 79x plastic filter plates 1x VA starter plate 1x VA end plate Plates maximum: 150 Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 380x100x140 cm Distance between first plate and spindle approx ca. 200cm More then 300 machines new and second hand on our seema .de

Roders RXP600 DSH Precision High Speed ​​CNC Milling Center Machining range for horizontal table position: X 500 mm, Y 855 mm, Z 400 mm Distance from spindle nose to table: 515 mm Tool magazine: 28 positions Overall dimensions in transport position: W 2300 × D 2800 × H 2920 mm. Total weight: 10200kg. Spindle Model: FISCHER HSC 40 - high-frequency milling, vector-controlled spindle, FISCHER (Germany) Power: 14 kW, 3000-42.000 rpm Tool holder HSK 40: Maximum tool diameter: 16 mm. Desktop Swivel rotary table with thrust bearings for highest rigidity and accuracy, integrated in the X-axis. A-axis tilt range: +/- 115 degrees. C-axis tilt range: +/- 360 deg. Workpiece weight: 200 kg. T-slot table size 340 × 340mm (ø400) Groove width: 12mm. Distance between grooves: 45 mm. Linear motors: all axes Cooling of the main a ...

CNC type: Inovance Power automation Number of axes: 5 X-travel: 230 [mm] Y-travel: 208 [mm] Z-travel: 117 [mm] Rapid movement speed X, Y, Z, A & C: 5000 [mm/min] Dimensions table: Ø 150. C axis angular travel: table revolution: 360 [°] Table orientation Axis A: +/- 120 [°] IBAG HF spindle Max. Spindle: 60000 [rpm] Spindle power: 2 [kW] Auto Automatic tool gripping: Yes Spindle attachment: Er type collet holder Number of tool magazine positions: 12 Blum tool length measuring probe Watering tank with pump: Yes Watering tank capacity: 10 [l] Supply voltage: 230 [V] Dimensions: 1100 x 800 x 1800 [mm] Weight: 540 [Kg] ADDITIONAL INFORMATION: x1 instruction manual x1 operating manual backup machine parameters Machine in very good condition, visible under power for testing on our premises, by appointment.

Magnetic table with electromagnet Magnetic table size 300x1000 mm Longitudinal feed rate 7-23 mm / min Transversal advance -working 0.1 - 8 mm - fast 990 mm / min - manual 0.02 mm / gradation Vertical advance -working 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm - fast 460 mm / min - manual 0.005 mm / gradation Abrasive disc speeds 1450min-1 The dimensions of the abrasive disc 350x40x127mm Electric motor power 5.5 kW motor Electric motor power vertical feed 0.5 kW Transverse feed electric motor power 0.04 kW Maximum load on the table 400 kg The height of the car is 1890 mm Disc balancing device yes Weight - mass 3500 kg Packaging - box dimensions (L x W x H) 2950x2220x2200 mm Standard equipment • Two-axis digital display • Grinding stones • Balancing wheel • Balancing stand • Magnetic plate for fixing • System for demagnetization • Cooling system •  ...

For sale is a semi-automatic two-column band saw machine SILOMA OL 500/800 DGH. Manufacturer: BULGARIA. Two-post rotating frame, manual workpiece feed, hydraulic workpiece clamp, hydraulic saw frame feed, manual saw tension, hydraulic saw feed, adjustable cutting force, frequency control of cutting speed, digital cutting angle indication, easy cutting angle adjustment. Designed for cutting profiles and solid workpieces made of steel, non-ferrous and light metals at angles of -30/+45 degrees. If necessary, we will help with logistics.

New OSTAS SMR-S 1270x190 mm sheet rolling mill The SMR-S models are one of the most popular metalworking solutions for light to medium duty applications; this is due to their robust body and the driving of the upper and lower rollers by electric motors. STANDARD EQUIPMENT and TECHNICAL SPECIFICATION • Precisely matched shafts made of high-grade steel SAE 1050 (CK-45) • Spiral reducer with chain and belt drive and wheels gears driving the upper and lower rollers • Machine body made of ST-52 steel • Rear roller motor • Manual top roll opening • Roller for conical bending • Top roller support system • Centralized lubrication system • Mobile electric control panel • Compliant with CE standards • User manual SPECIAL EQUIPMENT • Stepless speed regulation • Digital display for rear roller • Rear roller dr ...

4. Mobile SAW Tractor unit OERLIKON Source STAMIC 1303 DC - cabel array with sealed multipin connector on tractor for better handling and shipping of unconnected machine - Controlbox SUBARC 3 - Tracor MEGATRAC 6 with Laser and Flux Reusing unit by nozzle controll unit for real welding speed externally - machine comes with OEM manual and literature You find further listed equipment for welding in additional auctions (doens not belong to this auction): 1. 1 SAW Tandem Welding Boom - Oerlikon UP Tandem Column And Boom fitted for 2 times 3,2mm wire Welding Column for Submerged Arc Welding SAW Tandem submerged arc welding Manufacturer: Welding System: Oerlikon / AirLiquide MFT 70X60 SO, built 2011 used until 2014 Column: Uniweld DIMENSIONS: high 8m; reach 6 m; dolly 3,7 m x 3,6 m Tandem Submerged Arc Welding - Starmatic 1303 DC - Starmatic 1003 AC/DC - Contro ...

The machine is fully operational, bought in November 2016. Used for their own needs (tool room at the production plant). Recently replaced: kerosene filters, potentiometer in the remote control, complete Z axis with motor, bearings and propeller, cards in the control, C axis electro-brake, it is possible to check the machine. The set includes a second set of kerosene filters, holders (various types), about 16 pcs, complete documentation, user manual, technological manual, electrical diagram. Technical data: Feeds: x axis 900 mm y axis 680 mm axis z 405 mm POCON 60 control Table dimensions 1200 x 850 mm Dielectric - system capacity 800 l Machine weight 3.70 t

Labeling machine for containers adaptable to industrial lines or manual loading. Variable data printing Ideal for automatic or manual loading. Machine produced by SCM Costruzioni Macchine Italia - Line Lat model, year 1999, Voltage 380-50 Hz - 3 phases TECHNICAL FEATURES: - WEIGHT 600 Kg mm. - ABSORBED POWER 1,5 Kw. - POWER SUPPLY 380 + N Volt 50Hz - AIR CONSUMPTION 15 l./min - AIR PRESSURE 4.5 bar - OVERALL surface 2500x870 mm - HEIGHT max 1800 mm - VARIABLE DATA MARKER Thermal transfer Ribbon - Ribbon foil transfer system Operation description: The linear labeling machine with self-adhesive group LINE LAT LAP-LAT can be inserted in automatic packaging systems for containers of any type and shape. The containers are spaced before entering the machine by centering rollers placed on the sides of the conveyor belt. They are then guided by a counter belt which has the task o ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Set of additional documentationSet of additional documentation Option includes: - machine manual - control manual - parts catalogue (in paper version)

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

sheet width: 3100 mm plate thickness: 10.0 mm thickness at Niro-steel: 6.0 mm cutting angle: 2.0 ° down holder: 14 Stück no. of strokes: 13 - 18 Hub/min back stop - adjustable: 1000 mm Control: ELGO P40T column arm: 250 mm oil volume: 265 l engine output: 22,0 kW weight: 9600 kg range L-W-H: 4700 x 2300 x 2200 mm New price from 56.000 euros Special price on request Furnishing: - electro-hydraulic sheet metal plate shears oscillating cut - ELGO NC control - model P40T Touch, front left control panel - CNC electro-motorized back gauge, with ball screws including retraction function selectable Fold-out function for sheets longer than 1,000 mm - manual cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x support arms, with T-slot and mm scale - 1x freely movable foot switch with emergency stop button - Ball rollers in the support table - front finger protection - FIESSL ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

CharacteristicsTable surface850 x 650 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMovement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSet of additional documentationSet of additional documentation Option includes: - machine manual - control manual - parts catalogue (in paper version)

pressure: 200 t chamfer lenght: 3600 mm distance between columns: 3150 mm stroke of upper beam: 200 mm throat: 300 mm dayligth: 450 mm working feed: 9,0 mm/sec return speed: 80,0 mm/sec : 265 bar Control: konv. work height max.: 965 mm total power requirement: 15,0 kW weight: 12700 kg range L-W-H: 3860 x 1750 x 2800 mm Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) Torsion shaft for parallelism - electric back stop (X axis) with handwheel for fine adjustment on ball screws 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - split deer foot upper tools - 2x universal V-die block, reversible - freely movable 2-hand/foot control - Operation manual Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9308361  ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSet of additional documentationSet of additional documentation Option includes: - machine manual - control manual - parts catalogue (in paper version)

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - scraper-type chip-conveyor and bed-flushing; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal750 mmCross600 mmVertical560 mmTool changerApplicationVertical Type of magazineWheel Type of gripperPick up Number of tools30 Floor space/WeightDimensions (L x W x H)6,65 x 7,6 x 3,18 mWeight approx.12000 KgSplash guard equipment/cabinSplash guard equipment/cabin with illumination and sliding doors on operators side and front sideHSC75 linear 5-Axis SpecificationHSC 75 linear 5-Axis Specification clamping area Ø 750 mm, Ø 29.52 inch Tilti ...