manual used for sale

cap round: 520 mm cap square: 520 x 520 mm cap rectangle: 620 x 520 mm Depth of throat: 620 mm Max height of workpiece: 520 mm Table travel : Manual (1) -- hydraulic (2): manual Length of band saw: 6096 mm Power needed: 15 kW Length : 3300 mm Depth : 2200 mm Height: 2350 mm Weight: 4 ton

manufacturer: TLG / Germany Type: Pressure filler Short tube filler DF 24 / 4KK / 4 PP Filling valves 24 Kronenkorkerkoepfe 4 Screw cap Koepfe 4 Walking direction: Left - Right Manual cullet spraying Manual height adjustment Operating terminal Year of construction: 1996 FILM AVAILABLE - PLEASE REQUEST Further information and price on request

plate high hold system CNC controlled backgague manual knife play adjustment manual cutting angle adjustment Cutting length: 3050 mm Max sheet thickness st 45: 6 mm Backgauge: 1000 mm Adjustable cuttingedge: 0,4 - 2,20° Electric motor (power): 5,5 kW - 7,5 hp Length: 3560 mm Depth: 1990 mm Height: 1955 mm Weight: 6,3 ton High hold system: yes Number of sheet holders: 16x

: neu : ca. 4 Monate ab Auftragse : Taiwan : 46400 € : 951.2 € : 40 -3200 U/min : ISO 40 : 600 x 500 x 400 mm : 1000 x 500 mm : 3,75 kW : 1814 kg : 1000 mm/min : 8 : 14 x 63 mm : 300 kg : 600 mm : 500 mm : 400 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 40 - 3200 : 40 - 3200 : +/- 90° ° : 100 mm : manuell : 3,75 kW : 1200 x 250 mm : 160 - 660 mm : 95 - 495 (2. T-Nut), 180 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 3,75 kW feed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automati ...

: gebraucht : 2021 : 3974 : prompt, Zwischenverkauf v : Spanien : 5100 € : 1 : 1 : 32 mm : MK 3 : 250 mm : 65 - 125 - 185 - 365 - 54 U/min : 1,8/2,6 kW : M24 : 600 mm : 640 mm : 2020 mm : 260 kg : 100 mm : 85 - 635 mm : 1.170 mm : 300 x 270 mm : 600 x 380 mm : 120 mm demo machine ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN (sample photo) OPTIONS: lighting equipment € 231,-- coolant equipment and machine base with T-slots € 825,-- reverse for tapping € 737,-- DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1992 : 9680 : prompt, Zwischenverkauf v : 17300 € : 1 : 2050 mm : 6 mm : 12 - 20 1/min : 0,5 - 3 ° : 13 : 750 mm : 7.5 kW : 770 mm : 2680 mm : 1650 mm : 1570 mm : 3000 kg link motion controlled Backgauge with handwheel for fine adjustment Cutting angle adjustment 1 side stop 1000 mm manual cutting gap adjustment rear light barrier shield Knives newly sharpened backgauge motor 0,37 kW Operating manual of identical HACO TS in German DOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Spanien : 26700 € : 6000 mm : 40 mm : 6000 mm : 600 kg : 180 mm : 0,2 mm : 0,1 mm The ALRS 600 is a CNC controlled flat bar feeding and shearing system to be mounted on GEKA Hydracrop 80 and Hydracrop 110 dual cylinder ironworkers. This system is ideally designed for shearing desired lengths and quantities of flat bars up to 600x15 mm and 6 m length. THE ASSEMBLY CONSISTS OF: Drive roller with hydraulically controlled pinch roller. Servo motor with linear encoder. B&,R Power Control 500 10”user friendly touch screen control mounted in a control cabinet. Positive hydraulic clamping. Fix guide rollers. Manually adjustable straight guide rollers. 6m roller bed conveyor. Electric cabinet THE WORK PROCESS IS AS FOLLOWS: Place the flat bar on the rollers Adjust the lateral rollers to the width of the flat bar Clamp the material with the h ...

Carriage length: 3200 mm; Cutting width at width stop: 1270 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 136.5mm; Vorritzer: Yes; Saw blade swivel range: +45Â; Height adjustment of saw blade: electric; Swivel adjustment saw blade: electric; Adjustment of width stop: manual; Display saw blade angle: digital display; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Scoring gear adjustment: manual; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power: 7kW; Suction connection: 80 and 120mm; Machine length: 3500mm; Machine width: 2200mm; Weight: 715 kg; TECHNICAL DATA Dimensions and Weights Weight (net) approx. 715kg connection Suction Suction nozzle diameter120mm Extraction nozzle diameter saw blade protection80mm Installation information transport width990mm Machine body length1900mm machine body Width/ ...

: gebraucht : 2015 : 7290 : prompt, Zwischenverkauf v : Türkei : 21400 € : 40 to : 630 mm : 450 mm : 150 mm : 5 - 75 mm : 153 1/min : 415 x 275 mm : 68 mm : 40 mm : 230 mm : 280 mm : 4 kW : 1300 mm : 1700 mm : 2150 mm : 2950 kg 8-fold ram guide Clamping plate Light barrier protection 2-hand control panel and foot pedal Manual central lubrication User Manual in German with CE Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 69600 € : 160 to : 4050 mm : Y1 / Y2 und X Achse : 160 mm/s : 200 mm : 3600 mm : 300 mm : 430 mm : hydraulisch : 10 mm/s : 140 mm/s : 620 mm : 250 mm/s : 858 mm : 104 mm : 15 kW : 4850 mm : 1900 mm : 2610 mm : 10500 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles Manual crowning intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending  ...

: neu : 2023 : 9692 : Mai 2023, Zwischenverkauf : Türkei : 42300 € : 3100 mm : 6 mm : 4 mm : 14 1/min : 1.5 ° : 14 : 8.5 to : 750 mm : 120 mm/s : 11 kW : 170 l : 880 mm : 500 mm : 3750 mm : 1950 mm : 2770 mm : 1650 mm : 5550 kg linear guided machine with fixed cutting angle NC-preselection system D-Touch 5 with Touch-Screen for back gauge,cutting length, quantity with USB port motorical back gauge 750 mm onlinear ball screws,folding upwards control panel at the left machine side hydraulic hold down pistons are arrangedclose to the cutting edge foot switch manual blade gap adjustment on left and right side table with balls piece counter single and continuous stroke finger protection 1 squaring arm 1. 000 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm withT-slot and tilting cam variable adjustable cuttinglength for economic processing Upper and lower knife 4-fold rever ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 46730 € : 60 to : 2550 mm : Y1 / Y2 und X Achse : 120 mm/s : 160 mm : 2150 mm : 250 mm : 350 mm : hydraulisch : 9 mm/s : 70 mm/s : 620 mm : 250 mm/s : 813 mm : 104 mm : 100 l : 5.5 kW : 3250 mm : 1200 mm : 2350 mm : 4250 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles manual, centralized adjustablecrowning table intermediate clamps for upper tool upper tool1 ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 42300 € : 2500 mm : 6 mm : 4 mm : 15 1/min : 1°50’ ° : 12 : 8.5 to : 750 mm : 120 mm/s : 11 kW : 150 l : 880 mm : 500 mm : 3300 mm : 2615 mm : 1650 mm : 4940 kg : 125 mm linear guided machine with fixed cutting angle NC-preselection system D-Touch 5 with Touch-Screen for back gauge,cutting length, quantity with USB port motorical back gauge 750 mm onlinear ball screws,folding upwards control panel at the left machine side hydraulic hold down pistons are arrangedclose to the cutting edge foot switch manual blade gap adjustment on left and right side table with balls piece counter single and continuous stroke finger protection 1 squaring arm 1. 000 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm withT-slot and tilting cam variable adjustable cuttinglength for economic processing Upper and lower knife 4-fold reversible oilf ...

: neu : 9670 : prompt, Zwischenverkauf v : Türkei : 18100 € : 1 : 60 mm : 177 mm : 3 : 3.7 kW : 6 m/min : 70x10 mm / 600 mm, 30x10 : 90x25 mm / 500 mm, 50x5 m : 40x40 mm / 500 mm, 20x20 : Ø. 40 mm / 500 mm, Ø 20 m : Ø 60x2 mm / 600 mm, Ø 20x : 80x40x3 mm : 60x60x4 mm : 50x5 mm / 1.000 mm, 30x4 : 50x5 mm / 500 mm, 30x3 mm : 1160 mm : 1000 mm : 1175 mm : 1194 kg 3 driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel plane and hardened universal rolls lateral rolls adjustablein 3 axes manual/hydr. horizontal and vertical operation for- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 235 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 54500 € : 1 : 120 to : 3050 mm : Y1 / Y2 und X Achse : 120 mm/s : 180 mm : 2550 mm : 250 mm : 375 mm : hydraulisch : 9 mm/s : 77 mm/s : 620 mm : 250 mm/s : 878 mm : 104 mm : 150 l : 11 kW : 3750 mm : 1230 mm : 2400 mm : 5900 kg 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles manual, centralized adjustablecrowning table intermediate clamps for upper tool upper t ...

WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...

WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...

I sell here several machines, equipment, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts. Therefore, be sure to check out my other auctions Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw ROBLAND Type: Z320 Alu format slide 320 cm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 285cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence up to 130cm 3 different speeds adjustable (4000/ 5000/ 6000rpm) Motor power main engine 5.5 KW Motor power scoring 0.55 KW Prior viewing is expressly desired, just leave your phone number by e-mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The machines can be picked ...

Risco RS200 Twin shaft paddle mixer Serial: 1004013 2010, Stainless, 200l capacity, forward and reverse, manual side door for discharging product, with manual, 3Ph

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5600x1350x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L --------------------------------- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one  ...

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 31800 € : 40 to : 2000 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 2100 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter push buttons for pressing depth Y with digital display intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28000 € : 40 to : 1250 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter push buttons for pressing depth Y with digital display intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 8299 : September 2023, Zwischenv : Slowakei : 29600 € : 40 to : 1500 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2000 mm : 950 mm : 1900 mm : 1800 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter push buttons for pressing depth Y with digital display intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 26300 € : 40 to : 800 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 1750 mm : 950 mm : 1900 mm : 1640 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter push buttons for pressing depth Y with digital display intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Te koop: The Normfinisch Turntable blasting machine is suitable for blasting often larger, round products. The products are placed on a turntable and blasted by rotating the table in combination with the oscillating nozzle movement. The turntable is moved outside the cab with a transport system, so that loading with a crane/forklift is possible. The blasting machine is like new. Very little used! Areas of application of the turntable blasting machine are: Burr Shotpeenen Roughen For a uniform blasting result, the products rotate on a turntable The basic system is a manual turntable that can be placed on wheels or not in the cabin Different systems are possible for blasting, from manual to fully automatic with several movable guns. The degree of automation depends on the type and shape of the product Still to be seen under power. The original price was 60,000 euros. Please bid

For sale is the following machine: Second-hand machine Type Koepfer 173 SPS Built in 1989, completely revised in 2022 The machine is equipped with Klöckner Moeller PLC control. Machine color is green, RAL6011. Speed adjustment of the cutter is carried out with inverter and speed indicator. The number of teeth of the workpiece and differential is adjusted by means of interchangeable wheels. The machine is equipped with a shift milling head with automatic shifting. 2. Technical data max. module 2.5 max. workpiece diameter, manual loading 156 mm max. workpiece diameter, automatic loading 100 mm max. toothing length 150 mm max. workpiece length, for manual loading 360 mm max. workpiece length, for automatic loading 260 mm max. cutter diameter 63 mm max. cutter length 70 mm max. cutter displacement (shifting) 70 mm Partial gearbox 4:45 Cutter speed max. 1,100 -1 ...

: neu : 2023 : 9678 : prompt, Zwischenverkauf v : Türkei : 44700 € : 1 : 3100 mm : 6 mm : 4 mm : 50 mm : 15 1/min : 1,5 ° : 16 : 14 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 2 Stk. : 865 mm : 500 mm : 3515 mm : 4110 mm : 2200 mm : 3700 mm : 2100 mm : 7650 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglen ...

sheet width: 1520 mm plate thickness: 1,5 mm pre-bending: 1,5 mm roll diam. toproll: 80,0 mm adjustment: SW 60 mm mm total power requirement: 1,1 KW weight: 560 kg range L-W-H: 2350 x 750 x 1500 mm maintained condition from a maintenance workshop Furnishing: - asymmetrical roller arrangement - crowned rollers approx. 700N/mm² - Rounding and finishing rounds in the machine - Motorized adjustment of the rear/side roller with min. & max. position value specification Adjustment by electric potentiometers Front right operation - Manual adjustment of the bottom rollers using a large hand wheel - Conical bending by tilting the lower and rear rollers - Top roller can be swung out to the front - Bending performance = bending performance - Gear motor v - 6 m/min. - 1x free-moving dual footswitch (forward and reverse) - electrical safety device - User manual (PDF) Machine link : http://mhp.l ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm dimensions of saw-band: 3650 x 27 x 0,9 mm band speed: 15 - 100 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: li. 260 / re. 200 mm capacity 45 degrees: square: li. 250 / re. 180 mm capacity 45 degrees: flat: li. 270x200 re. 200x160 mm capacity 60 degrees: round: li. 180 mm capacity 60 degrees: square: li. 170 mm capacity 60 degrees: flat: li. 170 x 170 mm motor: 2,2 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,9 x 1,8 m Control: Windows CE basiert Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from  ...

plate thickness: 8,0 mm ST plate thickness: 5,0 mm VA table-size: 1000 x 950 mm blade length: 200 x 200 mm strokes per minute: 60 H/min adjustable: Winkel 30°-140° mm work height max.: ca. 950 mm oil volume: 60 l engine output: 4,0 kW weight of the machine ca.: 1200 kg range L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - 2x blank holders - 1x free moving foots ...

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10 mm/sec return speed: 135 mm/sec work height max.: 900 mm quantity of oil: 200 l total power requirement: 15 kW weight of the machine ca.: 9450 kg - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system A with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH /  ...

Blemo Frequency inverter ER23-1.1/4k - Instruction manual available - Price on request Blemo frequency inverter ER23-1.1/4k - instruction manual available - price on request

6000W Raycus The machine is fully equipped: - CYPCUT - high-end CNC with German surface - Raycus - laser source - Raytool cutting head - Interchangeable table - 1 CCD camera, 1 for indoor use -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - 24 months warranty Working area (mm) 3000 x 1500; 6000 x 2000; 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 3050; 6050; 4050 Y axis (mm) 1550; 2050; 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Height ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10,0 mm/sec return speed: 185 mm/sec quantity of oil: 300 l Control: DELEM DA 66T total power requirement: 18,5 kW weight of the machine ca.: 13900 kg dimensions: 5150 x 2250 x 3000 mm HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke increased projection -------------------------------------------------- ------- Furnishing: - DELEM CNC control model DA 66T - swiveling touch screen control unit - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split deer foot upper tool Roleri 135.85.R08, System A - with additional crowning of the upper wedge - Universal die block ...

- CYPCUT - high-end CNC with German surface - IPG - laser source - Precitec Lightcutter - cutting head - Interchangeable table - 2 CCD cameras, 2 for indoor use, 1 x for control shuttle table - 2 years warranty -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - Fast Cutting Mode 24 months warranty Working area (mm) 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 4050 Y axis (mm) 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Heights – IPG Laser 4000 W 20 mm / steel - 16 mm /  ...

Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end ferrules, wire end ferrules, cable lugs, manual crimping pliers -Manufacturer: WMW, manual crimping tool type PH 2.5C -Pressing: of cable lugs and cable connectors -Pressing force: 25.0 N -Press path: 15 mm -Transport case: including accessories, see photo -Number: 4x pressing pliers available -Price per piece -Dimensions tongs: 600/180/H25 mm -Weight compl.: 3,2kg/St

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

sheet width - max.: 0500 mm coil weight: 2,00 t coil internal dia.: 355 - 420 mm total power requirement: kW weight of the machine ca.: 0,93 t dimensions of the machine ca.: 2,00 x 0,95 x 1,75 m Construction 4-jaw design Spread hydraulically Spreading process tested (functioning properly) Manual disc brake (via star grip) Hydraulics attached to the reel construction Manual valve attached (via pipe) to machine construction U-profile attached under machine construction (for mobile use of the reel) Floor height - center reel head 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Execution: Aggregate type: transportable Execution: PTO generator Technical data engine: Engine manufacturer: Tractor Technical data generator: Generator manufacturer: Endress Generator type: EZG 80 / 4 IT / TN-S Generator power: 80 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Manual start Functions: Hand start Switch: Generator switch 4 poles Delivery: Built Dimensions of the PTO generator: Width approx. mm: 740 Height approx. mm: 1.007 Length approx. mm: 1.192 Weight approx. KG: 500 Stock number: 1372 Condition: New Year of construction: 2023 Delivery period: Instant Verl Hours: 1 Location: Verl - Germany Scope of delivery: PTO generator 80 kVA – Brushless with electronic voltage reg ...

carrying capacity: 1000 kg number of suction cups: 8 suction cup dia.: 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device ne ...

carrying capacity: 250 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...

sheet width: 2030 mm plate thickness: 1,0 mm roll length: 2050 mm roll diameter: Ø 95,0 mm work height max.: 950 mm engine output: 1,0 kW weight: 275 kg range L-W-H: 2700 x 700 x 1160 mm Furnishing: - motor-driven asymmetrical 3-roller bending machine - hardened rollers - Manual folding storage for quick removal of the workpiece - Profile inlets at the end of the roller - Double foot switch for R/L run and emergency stop button - rear roller manually adjustable - manual infeed of the bottom roller - electrical safety device Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9401257 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2550 mm plate thickness: 4,0 mm thickness at Niro-steel: 3,0 mm cutting angle: 1°30 down holder: 12 Stück no. of strokes: 30 - 40 Hub/min back stop - adjustable: ca. 950 mm Control: DAC 150 engine output: 7,5 kW weight: 2800 kg range L-W-H: 3100 x 1900 x 1700 mm very well-maintained condition () Furnishing: - electro-hydraulic sheet metal shears // swing cut - DELEM DAC 150 NC control operable from the front Entry of target / actual for electr. backgauge - NC motorized backgauge with ball screws + guide shaft - electrical cutting length limitation - manual cutting gap adjustment - 1x side stop - 2x support arms - 1x free moving footswitch - front finger protection - EMERGENCY OFF button + main switch at the front - Instruction manual control Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325295 The data for this ad was create ...

ear of manufacturing: 2015 Capacity: Maximum 1000 pieces per hour at maximum 1200 grams Out of production, still in line Consisting of: WP-Haton V300 dough divider Stop position Product counter Belt oiling various pressue control Frequency inverter for variable speed Weight range 100 till 1200 grams WP-Haton CR59 AT roundmoulder Adjustable tracks Oil spraying on cone Heating with fan Frequency inverter for variable cone speed WP-Haton AF2002 intermediate proofer 12 rows plastic cups Flour duster on infeed belt Resting time at 1000 pieces per hour: 11,5 minutes Clima unit possibility to discharge towards second roundmoulder or longmoulder possibility to take of manual at second rondmoulder or second time in proofer WP-Haton CCR59 AT roundmoulder WP-Haton combi U longmoulder 1 pair of sheeting rollers and 2 driven flattening rollers Curling net Pr ...

pressure: 130 t chamfer lenght: 3150 mm distance between columns: 2600 mm engine output: 15 kW control: CYBELEC VisiTouch weight of the machine ca.: 10900 kg dimensions of the machine ca.: 3990x1750x2900 mm Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model AS with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic ...

bore capacity in steel (diameter): 50 mm bore capacity in cast iron (diameter): 60 mm threading cutting capacity:: M36 throat: 400 mm bore stroke: 230 mm spindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range: 54 - 1032 U/min transmission ratio: 12 Stufen column diameter: 200 mm table surface area: 550 x 550 mm total power requirement: 3,0 kW weight of the machine ca.: 0,72 t dimensions of the machine ca.: 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-a ...

: neu : 2023 : 4546 : prompt, Zwischenverkauf v : Taiwan : 39400 € : 807.7 € : 1 : 65 - 2600 U/min : ISO 40 : 420 x 220 x 380 mm : 840 x 390 mm : 2,2 kW : 1145 kg : 840 x 390 mm : 1000 mm/min : 5 : 14 x 63 mm : 200 kg : 420 mm : 220 mm : 380 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 65 - 2600 : 90 - 310 mm : 65 - 2600 : +/- 90° ° : 100 mm : manuell : 2,2 kW : 950 x 250 mm : 90 - 310 mm : 100 - 480 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spi ...

: gebraucht : 1997 : 8250 : Türkei : 22500 € : 1 : 120 to : 3100 mm : 180 mm : 2550 mm : 240 mm : 320 mm : 170 mm : 11 kW : 3500 mm : 1450 mm : 2270 mm : 7200 kg : 600 mm : 53 mm/s : 10 mm/s : 80 mm/s : 3100 mm With 2-hand and foot control panel Motorised backgauge adjustment 600 mm via +/- push-button with mechanical reading and manual fine adjustment at the front Motorised press depth adjustment via +/- button with digital display 2 backgauge fingers 2 table support arms Foot &, two-hand control Side &, rear safety fairing New Multi V Die 3100 x 90 x 90 mm 7V Openings 9/13/16/20/30/35/56mm cranked upper tool 3100x110x25mm 86°, new grinded User Manual German + EG Declaration of conformity COMPLIES WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Infratec VarioCAM HDx 625 Professional infrared camera Thermal imaging camera 5.6 " TFT thermography measuring system with IRBIS software remotely controllable via PC Condition: Used TOP condition - purchase 2020 - functionally tested - rewriting of the SW license included Thermography measuring system and infrared thermal imaging camera Type: VaroCAM HDx 625 Manufacturer: InfraTec GmbH, Dresden, Germany Date of purchase according to invoice: 18.09.2020 Typical areas of application are: - Therographic inspection of electrical and mechanical installations and aggregates - Optimization of components and assemblies - Material investigations - Control of process temperatures -Quality assurance - Building thermography Execution: - 5.6 " TFT monitor for the live image - Detector format 640 x 480 -Distance measurement - permanete autom. Focusing - Spot editor (tem ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 109510 € : 600 mm : 400 mm : 400 mm : 225 mm : 400 mm : 50 kg : 450 mm : 500 - 2200 1/min : 5,5 kW : 19 kW : 2800 mm : 2800 mm : 2610 mm : 3400 kg : Dm. 355 x 38 x Dm. 127 mm : 0 - 3000 mm/min : 0,001 mm : 1.7 kW : 2.4 kW : 0.005 mm : 0.003 mm iSurface control with 10,4", touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard linear scale Fagor (0,001 mm) for downfeed axis electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English ALTERNATIVE: model version FRG-400S with Sm ...