mandrel used for sale

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size drm. : 200 mm2 recesses in the table: 30, 60 cm wideProjection: 265 mmDistance table - ram: 390 mmExternal dimensions L x W x H: 600 x 280 x 870 mmColor grayused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...

Mandrel press make WMWTechnical specifications:Pressure force approx.: 1 - 1.5 tTable size Drm. : 200 mmThroat: 250 mmDistance table - ram: 300 mmMandrel diameter: 45 mmExternal dimensions L x W x H: 550 x 220 x 700 mmColor orangeWith- Base 1000 x 500 x 830 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mandrel Tube Bender LANG type UGM 108Year of construction 1966Max. Tube bending capacity: 108 mmMax. Bending radius at 108 mm pipe with 3.9 mm wall thickness: 600 mmMandrel length: 2500 mmOutside dimensions approx: 3500 x 2200 x 1500 mmWeight approx: 1550 kgWith- hydr. Dorn return- Holder for wrinkle straightenerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cut to length line Redman 2000mm x 13mm x 20 ton Make: Redman (UK) Material Width: 600mm – 2000mm Material Thickness: 6mm – 13mm Coil Weight: 20 ton Coil ID: 460mm – 760mm Coil OD: 1800mm Max Speed: 20 meters per minute Production Mode: Stop / Start Direction: R-L Entry V-Type Coil Car Double Mandrel Uncoiler Hold-Down Roll Hydraulic Peeling Table Driven Pinch Rolls Pinch Rolls Diameter: 330mm Corrective 4-Hi Leveler Nine (9) Working Rolls Work Rolls Diameter: 140mm Hydraulic Work Rolls Adjustment Up and Down Back Up Flights 120HP DC Motor Drive Mechanical Shear with Motor Belt Conveyor with Measuring Head Drop Type Stacker with End Conveyors Electrics, Hydraulics, Controls

Hydraulic machine Can work in horizontal and vertical positions 3 driven rolls Type: 3 rolls Dia rolls: 225 mm Dia of die mandrel: 75 mm Rotationspeed: 7 m/min Motorpower: 4 HP Length : 1000 mm Depth: 980 mm Height: 950 mm Weight: 1200 kg

Universal Slitting Line 72″ x .187″ x 20,000Lb Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Specifications: - Bending performance - Pipe at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 4.5 m. with hydr. Retreat - Bending tools 16 , 25 , 20 , 33.7, 38 mm - Bending blade 3000 mm

Was used for filling and packing flour and sugar, format: 1000g, max. output: 90/ min, with mandrel, main dosing unit, Glue Applicator NORDSON, check weigher and post doser.

Oto mills 127mm x 5mm HF Tube Mill with Packaging Line Make: Oto Mills Year New: 2000 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Material Strength: 360 – 510 MPa Tooling: 17 sets, Round, Square, Rectangular Entry Coil Car Floor Standing V-Type Design Powered Traverse & Lift Mandrel Uncoiler Powered Expansion Powered Hold – Down Roll Sliding Base Feed-Up Motor Shear & End Welder TIG Power Supply Mechanical Shear Driven Pinch Rolls Coil Straightening Machine Horizontal Accumulator Entry & Exit Pinch Rolls Coil Feeding Unit Variable Speed Drive Forming Mill Shaft Diameter: 80mm Eight (8) Forming Stands Seven (7) Side Forming Stands Horizontal & Vertical Stand Adjustment Individual Gear Boxes Universal Drive Variable Speed DC Motor Drive 300Kw High Frequency Welder 3-Roll Adj ...

Paxson Loop Slitting Line 72″ x 0.375″ x 50,000Lb (A3754) Make: Paxson Material Width: 12″ – 72″ Weight Capacity: 50,000Lb Thickness: .050″ – .375″ Coil ID: 20″ – 30″ Coil OD: 72″ Line Speed: 850 feet per minute Direction: Right to Left Entry L-Type Coil Car Floor Standing Design Hydraulic Lift & Traverse Self Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Water Cooled Brake Feed-Up Motor Sliding Base Hydraulic Peeling Table Driven Pinch Rolls Adjustable Edge Guides 4-Roll Coil Breaker Mechanical Entry Crop Shear Two (2) Slitting Heads Arbor Diameter: 9″ and 12″ Crane Removable Type Adjustable Arbors 150HP DC Motor Drive Multi Speed Gear Lots of Knives and Tooling Two Pro-Eco Scrap Winders Max Thickness: .500″ 25HP Motor for Each Unit Powered Open / Close Pit Cross Over Table Drag Bo ...

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5" - 16" Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out  ...

BEMA control pipe bending machine mod. G35 CND Specifications Tube Bender Capacity in round: max Ø 42 mm Tube thickness max 2,5 mm Bending angle: from 5° to 190° max Length of the mandrel: 2100 mm Max bending radius: 260° Min bending radius: 22° With: Delivered with programming manual Voltage: 220 V

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Brand: Martin Type: T25 M-No.: V 245411 Year of construction: 1997 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Control panel: eye level with digital display, stop position with digital display Spindle height 150 mm electromotive heights adjustment with digital readout Inclined position: -5° - +45° electromotive angle adjustment with digital readout Feed: 4 roll feed device Optional: Stop: Aigner Integral stop Milling protection cover: Aigner Centrex

Brand: Paoloni Type: T140 Motor power: 5 KW Milling mandrel : 30 mm Height adjustment milling spindle: 140 mm Speeds: 3000-4500-6000-9000 Spindle height adjustment: Handwheel adjustment with analog display Feed: HolzHerr 3 roll Option: Aigner integral stop

SAC CS40 sliding table saw Year of construction: 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420 mm, Locking mechanism for easy plate loading in any position Steel sliding system Main saw mandrel (30 mm) 45° swivel Electric raising and lowering of the main sheet. Main motor 5.5 kW, self-braking motor Cutting speeds 2,600 - 4,000 and 5,600 rpm Saw blade diameter max. 400 mm Maximum cutting height 130 mm ( 90° ) 100 mm ( 45° ) Rip fence 1,500 mm Scoring saw motor 0.75 kW 120 mm (diameter scoring saw blade - 8,000 rpm scoring unit with external adjustment) Square length stop with stops, Extension table with mitre stop and sliding boom support. 400 V, 50 Hz Weight 820 kg CE, marked

Weibert HX 260-CE 5-fold station wagon Motor 3x 3HP, 400V, 50Hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Milling mandrel 3000/6000 rpm Sliding table 1450 x 320mm Cutting length 1200mm Mitre stop Eccentric clamp Weight: 485kg G&RO-HX260-CE

NEW ex works Standard equipment - Threading device - Control panel with OLED display - Robust, high-quality drill head hood - LED lighting - Quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - in tapping mode: right-left SPECIFICATIONS Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1= M30x3,5 / R2= M24x3 / R3= M36x4 Spindle MK IV Drilling depth: 160 mm Projection: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth  ...

Package HKS63 Tool Mounts composed of 1 piece Holex HSK 63-M8x101 for screw-in milling cutter 1 piece Holex HSK 63-M12x101 for screw-in milling cutters 1 piece Holex HSK 63-M12-126 for screw-in milling cutters 1 piece HSK 63-M12-132 for screw-in milling cutter 2 pieces Garant HSK-A63-4-80 shrink chuck 1 piece Garant HSK-A63-8-50 for screw-in milling cutter 5 Garant HSK 63 M8-101 for screw-in milling cutters 1 piece Hoffmann HSK-A63-8-65 for Weldon 1 piece Hoffmann HSK-A63-16-80 for Weldon 1 piece Goblet HSK 63x6x65 for Weldon 1 piece Goblet HSK 63x10x65 for Weldon 1 piece Goblet HSK 63x12x80 for Weldon 4 pieces WNT 84 754 622 transverse groove cutter mandrel

: neu : 2023 : 7287 : ca. 2 Wochen ab Auftragse : Türkei : 4600 € : 1 : 500 kg : 1200 mm : 470 mm : 520 mm : 300 mm : 50 mm : 0,55 kW : 1400 mm : 1200 mm : 1550 mm : 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5148 Type: URWA 250 Producer: Profiroll Created: 2004 Parameters: Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100-800 1/min Mandrel diameter: 45-100 mm Length: 2400 mm Width: 2400 mm Height: 2400 mm Weight: 4900 kg

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11200 € : 231.84 € : 2500 kg : 1300 mm : 450 - 550 mm : 50 - 600 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: Pneumatic downholder (CMC P3 2500 600 M D1300) € 2.100,-- BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pear 1FC4 Tool Milling Machine Manafacture: PEAR Model No.: 1FC4 X-axis (longitudinal): 200 mm Y-axis (transverse): 300 mm Z-axis (vertical): 155 mm Ratio: 1:1 Table dimensions (mm x mm): 600x400 Length x width x height: 1300 × 1300 × 2300 mm Collet bore mm: 4,6,8,10,12 Spindle speed: up to 12,000 rpm Distance between table and mandrel: 530 mm Engine hp: 0.75 RPM: 700-4400 Weight: approx. 1800 kg More items - new and used - can be found in our shop! International shipping costs on request!

: neu : ca. 10 Wochen ab Auftrags : Türkei : 15200 € : 314.64 € : 4000 kg : 1300 mm : 450 - 550 mm : 50 - 600 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumatic downholder(CMC P3 4000 600 M D1300) € 2.200,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7100 € : 148.39 € : 1250 kg : 1300 mm : 450 - 550 mm : 50 - 400 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumaticdownholder (CMC P3 1250 400 M D1300) € 2.200,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 9900 € : 206.91 € : 2500 kg : 1300 mm : 450 - 550 mm : 50 - 400 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumatic downholder(CMC P3 2500 400 M D1300) € 2.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 7288 : prompt, Zwischenverkauf v : Türkei : 5900 € : 1 : 500 kg : 1200 mm : 470 mm : 520 mm : 300 mm : 80 mm : 1450 mm : 1200 mm : 1640 mm : 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC DOWN HOLDER SUPPORT ARM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

WEINIG Rondamat 912, S/N 912-497 – fully automatic tool grinding machine • Automatic re-sharpening of straight planing knives in the cutter head with conventional or hydro-clamping • Automatic resharpening of cutters in the hydroplaning head (in front of the chest) • Automatic dividing head for up to 36 cutting edges • concentricity tolerance of less than 0.005 mm • Integrated coolant device • Table feed infinitely variable (forward / return) • Easy operation via membrane keypad and digital displays Specifications • Grinding mandrel D=50 mm • Planer head diameter min. 80 mm to max. 280 mm • Grinding length max. 260 mm • Table stroke 500 mm • Programmable knife count from 2 – 36 • Programmable grinding cycles per tool 1-9 • Clearance angle infinitely adjustable 15° – 35° • Axis angle max. 15° • Grinding spindle speed n=4,600 r ...

Reference standard, teaching mandrel RICHARD KAUTHE KG 5 mm 75 pieces class 5 in wooden box Dimensions: 250 x 220 x 75 mm

Accessories for tool presetter SOMET TYPE 685062 1x mandrel SK50 / Ø 60 x 250 mm Dimensions: Ø 71 x 378 mm 1x tool holder SK50 / Ø 80 x 128 mm Dimensions: Ø 140 x 158 mm 1x tool holder SK45 / Ø 80 x 128 mm Dimensions: Ø 110 x 158 mm 1x tool holder SK40 / M12 x 1,75 Dimensions: Ø 52 x 133 mm 1x fine pointer M1/60 suitable tool setting device - see ME427 ! used, tested ! Dimensions ( wooden case ): 550 x 340 x 180 mm

Fine reading device, illuminated measuring device for length displays WGN 103551 Measuring distance: approx. 12 mm Supply voltage: 6.0 V AC / DC Mounting mandrel: Ø 20 mm, length: 35 mm used, tested ! Dimensions: 80 x 80 x 110 mm

sheet width - max.: 1770/1850 mm coil weight: 20,00 t coil internal dia.: 508 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 5,00 x 1,55 x 1,55 m dimension – machine corpus (without mandrel) l x w 2.500 x 1.450 mm working direction – previously right - left working speed – previously 100 / 200 m/min. accessories: expanding process hydraulically gear box manufacturer KESTERMANN, power 80 kW / speed N1 = 370 2 x counter plate (movement – base plate) 1 x cylinder tube – new (expanding) circular lubrication kind of brake system disc brake brake disc available brake caliper 1 x available / 1 x not available motor not available (power previously 65 kW) base plate not available press arm not available hydraulic unit not available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0120 mm coil outside dia.: 1200 mm weight max. in kg: 300 kg sheet thickness - max.: 1,00 mm diam. of the rolls ca.: 10 mm nomb. of straightening rolls: 16 diameter of the mandrel: 350 - 530 mm total power requirement: 5,50 kW weight of the machine ca.: t dimensions of the machine ca.: m - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Manually adjustable hold-down roller at the inlet - Large roller basket with cover on the outlet - Free-standing control panel - Lateral a ...

sheet width: 0120 mm coil outside dia.: 800 mm weight max. in kg: 150 kg plate thickness: 1,50 mm diam. of the rolls ca.: 12 mm nomb. of straightening rolls: 16 diameter of the mandrel: 180 - 550 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m - Reel and straightener as a combination with a common frame - Manually adjustable reel brake - Coil limiting ring at the front, fixed washer at the rear - Reel can be moved manually laterally - manual reel spreading - side belt – guide rollers with central adjustment at the inlet - manual block adjustment of the straightening mechanism, display via dial gauges - Oil - central lubrication - Loop control via sensor - Speed adjustable via potentiometer - Belt support at the outlet - Free-standing control panel - Lateral adjustment of the reel using a hand crank - Belt support at the outlet The data  ...

Tool presetter SOMET SDJ 300 measurable tool diameter: Ø 6 - 300 mm measurable tool length: 40 - 500 mm accuracy: 0,0,002 mm 2x interchangeable bushing ISO 40 1x interchangeable bushing ISO 45 1x interchangeable bushing ISO 50 1x test mandrel ISO 50 on underframe used, tested ! Dimensions: 1250 x 600 x 1870 mm

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter, drill chuck holder, drill chuck holder, taper mandrel, MT insert shank -Manufacturer: Albrecht, drill chuck holder -Hoffmann: Art.-No .: 342600 3/24 -Morse taper: MK3 -Drill chuck: B24 -Dimensions packaging: 165/30 / H30 mm -Weight: 0.5 kg

Tool holder, milling holder, milling tool, test mandrel -Test pin: Ø 50 mm, with tip -Adjustment: SK50 -Dimensions: Ø 97 x 350 mm -Weight: 5.3 kg

Tool holder, milling holder, milling tool, cutter head -Manufacturer: Wohlhaupter, tool holder 195 015 TO13815 -Take: SK40 -Mandrel: 69871 ANSI 40-SMA 22/63 -Dimension: Ø 64 x 160 mm -Weight: 1.3 kg

Universal bendingmachine For bars - wire - flat stock - tubes Standard with fast coupling and foot pedal Speed: 7 rpm Possibility for bending and twisting For thin (with mandrel) and thicker tubes. CNC cornerprogrammation Motorpower: 3 kW Length : 620 mm Depth: 850 mm Height: 980 mm Weight: 220 kg

WEINIG Rondamat R 934 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment: Net cash register be ...

WEINIG Rondamat R 934 S/N 934-733, YOC 1996 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment ...

WEINIG Rondamat R 912 S/N 912-497, YOC 1995 – Ref.-No. 119130 – fully automatic tool grinding machine • Automatic resharpening of straight planer knives in the cutter head with conventional or hydro clamping • Automatic resharpening of milling cutters in the hydraulic planer head (in front of the chest) • Automatic divider for up to 36 cutting edges • Concentricity tolerance below 0.005 mm • Integrated coolant device • Table feed infinitely variable (forward / return) • Easy operation via membrane keypad and digital displays Specifications • Abrasive mandrel D=50 mm • Planer head diameter min. 80 mm to max. 280 mm • Grinding length max. 260 mm • Table stroke 500 mm • Programmable number of knives from 2 – 36 • Programmable grinding circuits per tool 1-9 • Free-angle infinitely adjustable 15° – 35° • Axis angle max. 15° • Gr ...

face milling cutter, slip-on milling cutter, milling head WMW, SMALCALDA FPR125 diameter: 125 mm number of cutting edges: 8 diameter base body : 145 mm height: 50 mm with cutter mandrel SK40 used, tested ! dimensions ( cutter ): Ø 145 x 205 mm

Throat theory, borderline throat theory -Manufacturer: Lindenmaier, jaw gauge adjustable limit jaw gauge -Measuring range: 28 to 46 mm -Accessories: mandrel gauge Ø 30/39 mm see photos -Box dimensions: 220/180/H60 mm -Weight: 2.5 kg

Face cutter, slip-on cutter, milling head WMW, SMALCALDA FPR160 diameter: 160 mm Number of cutting edges: 10 diameter base body : 180 mm height: 50 mm with cutter mandrel SK40 used, tested ! dimensions ( cutter ): Ø 180 x 227 mm

Special helical compression spring, compression spring, 4 pieces FIBRO 241.14.50.076 Colour: Green Sleeve diameter: Ø 50 mm Mandrel diameter: Ø 25 mm Length of unloaded spring: 76 mm Travel: 30.5 mm travel max. (100%): 38 mm Working spring force: 3812.5 N spring force max. (100%): 4750 N New ! Dimensions ( single compression spring ): 340 x 112 x 112 mm

Offer 23285 Specifications: - Coil weight up to approx. 200 kg - Coil width up to approx. 200 mm - Coil inner diameter of approx. 300 mm - Coil outer diameter up to approx. 1000 mm - Height of the mandrel 1300 mm - Central spreading of the shots - Operation via SIEMENS TD 200 text display - Infinitely variable speed control - Manual control button -Auto. Belt loop control -Operating instructions - Drive 400 V / 0.37 kW - Space requirement approx. W 1200 x D 1200 x H 1800 mm

Cansa NC 76 hydraulic pipe bending machine MAchine is in excellent condition 60 mm and 76 mm mold comes along with machine Maximum bending capacity 76X4 mm diameter Hydraulic motor power 15 kW Max. 190 bending angle Mandrel length 4000 mm