mandrel used for sale

Manual written press for stamping of letters and numbers

1x assortment of bore measuring mandrels, Manufacturer: DIATEST 6.5mm to 45mm Consisting of: 66 pieces measuring mandrels 16 pieces measuring mandinch holder

tube diameter: 25 mm wall strength: 2 mm bending radius min.: 10 mm Control: bending radius max.: 75 mm total power requirement: 11 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Original wrestler holders (Bekum) - Completely overhauled - Quick change function - Immediately available Original blow pin holders (Bekum) - Completely refurbished - Quick change funcion - Immediately available

Original Brass Thorn Shots (Bekum) - New - Screw thread - Immediately available - Thread M22x1 Original blow pin holders (Bekum) - New - Screw thread# - Immediately available - Thread M22x1

Bending capacity: 6-42mm, connected load: 4kW.

Manufacturer: Tubobend Type: 80 S 108 V Year of construction: 2000 Range: max. Ø 76.1 mm

Manufacturer: Kottmann & Berger Type: BVA 3 Year of construction: 2001 Rated power: 5 kW Pressure: max. 6 bar Bending diameter (steel): 32 mm Bending radius: 1.5 x D – 2.5 x D Machine weight: 0,7 t

Length: 70 mm, leg length: 45 x 45 mm, for belt width 19 mm Stock: 14,000 pieces also available in partial quantities Price € 62,00 per 1000 pieces

- Working range pipe Ø 20 to 60.3 mm (wall thickness 2.3 mm / mild steel) - Preselection 4 bending angles by rotary control - Bending, deburring - Pipe extension length 4,500 mm - Rotation angle unit manual - Spine retreat

Limit gauge mandrels PAGUS 25 - 75 mm 8 pcs 25D9 +65 / 40F8 +25 / 40F8 +65 / 40F8 +65 / 40F8 +65 / 40F8 64 / 62H7 0 +30 / 68H7 0 +30 / 70H7 0 +30 / 75H7 0 / 75H7 +30 Dimensions: 400 x 300 x 180 mm

Cutter mandrels, tool holder, with tightening thread WMW, VWF 40 x 22 x 315 ( 40x22x315 ) SK40 tool holder: Ø 22 x 315 mm used ! Dimensions: 468 x 63 x 63 mm

- Working range pipe max. Ø 6 – 50 mm - Pipe extension length 3,000 mm - Electronic three-axis control - Incl. existing bending tool D20xR40/D40xR80/D40xR120/ D50xR110 - incl. prev. Mandrels 20x2 / 20x1 / 40x2 / 50x2 - Weight approx. 750 kg - L x W x H approx. 3,800 x 700 x 1,500 mm - Incl. instruction manual as PDF

Description: mounted mandrels, Thermo grip veldoni HSK 63, 150 pieces weight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm

ZREMB GH4 tube bending machine, manufactured in 1983, is used in factories during the precise processing of all varieties of installation tubes. The tube bending is performed in a semi-automatic mode on a cam with the mandrel filling the most deformed section of the tube. The machine comes with a comprehensive range of equipment shown in the accompanying photos. The GH4 mandrel bending machine weighs 2450 kg. The ZREMB tube bending machine consists of: – drive mechanism – mandrel feed mechanism – guiding mechanism – control panel mechanism – hydraulic system – electrical installation assembly – frame assembly Technical specification of the ZREMB GH4 bending machine - tube diameters: 1 ½”; 2″, 2 ½”; 3″, 3 ½”; 4″ - maximum bending angle: 180° - bending capacity (30 bends): 180°/h - head working movement time (180°): 38 s - head return movem ...

Mandrel tube bending machine make RASI type UNI 3Machine -No: 1740, built in 1989Technical specifications:Bending capacityMandrel bending 180 °: 60 x 3 mmR =: 1.5 x DMandrel length: 6000 mmDrive power: 3 kWExternal dimensions of the machine L x W x H: 1100 x 1100 x 1250 mmMachine weight: 700 kgWeight mandrel: 350 kgWith- Mandrel bending device 6 m mandrel length L x W x H 6500 x 450 x 1200 mm- hydraulic mandrel retraction- 3-way foot switch- mobile on castors- 1 set of bending tools built upused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

SHUZ TUNG CNC 50 BRM CNC tube and profile bending machine built in 2014 in Taiwan allows for fully automatic, serial production of complex spatial workpieces in 5 axes with simultaneous hole punching. Excellent precision and accuracy of bending are guaranteed by the reliable servo motors used in the machine, which are responsible for realising the main working movements, i.e. bending, rotation and material feed. The rest of the movements are driven by a central hydraulic system with electronic lubrication. The SHUZ TUNG CNC mandrel bending machine is operated via a control panel with an installed CNC controller with the option of saving an unlimited number of programmes. In addition, the automatic servo bending machine is equipped with several bending rolls, a high-quality mandrel and an actuator to support material feed. The 50 BRM automatic CNC mandrel bending machine weighs 3500 kg ...

Description: Additional information: - Manually operated, - as a range of clamping mandrels for different clamping diameters, - with clamping sleeve, technical features (hardened, low-wear version / MZE), area of application: - internal clamping of round workpieces. - measuring operations and light grinding operations. - ideal for large clamping lengths or long workpieces. Advantages: - Tool-free quick change of the clamping sleeve, - High concentricity and repeatability, - High flexibility thanks to mounting on the shaft or between centers, - Short changeover times, Contents in a storage box Quantity = 5 pieces: - Basic mandrel MZE, size 2, with centering hole, for internal clamping No. 315002 - Basic mandrel MZE, size 3, with centering hole, for internal clamping No. 315003 - Basic mandrel MZE, size 4, with centering hole, for internal clamping No. 315004 - Basic mandrel MZE, size 5, w ...

tube diameter: 6 - 28 mm wall strength: 2 mm bending radius min.: 2 x D Control: IPU 20 bending radius max.: 5,0 x D mm bending angle max.: 190 ° arbor length: 3000 mm operating pressure: 180 bar hydraulic motor: 4 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: 3,8 x 1,1 x 1,3 m Condition: ready for operation: Electric 400 Volt: Bending segments: diverse Zoll Bending mandrels: 4 Operation panel: 0,5 x 0,6 x 1,03 m Double Foot pedal: Machine manual: Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: manual and semi-automatic. Control buttons: hydraul ...

MACRI ITALIA PROVAR 6-45 U-D bending machine was manufactured in 2019 in Italy. The fully automatic mandrel bending machine is used in the process of machining tubes and profiles with a maximum diameter of 45 mm in 6 numerically controlled axes (X, Y, Z, B1, B2, A). Excellent process stability and workpiece quality, with the possibility of bending standard and variable (free) radiuses, are guaranteed thanks to the robust steel construction, the moving head with high-strength gears and the equipping of all machine axes with brushless servomotors. The MACRI PROVAR 6-45 U-D CNC tube bending machine is controlled using state-of-the-art MACRI software with the ability of importing files from 3D programmes and performing an anti-collision test with 3D simulation, programming of positioner force and automatic mandrel lubrication and many other useful functions. The total weight of the machi ...

Mandrel Tube Bender Fabr. LANG Type EL 65Machine -No: 2156 Year 1967for pipe diameter: 60 x 2 mmMax. Bending radius: 300 mmMax. Bending angle with existing normal tool: 180 °Mandrel holder length: 3000 mmBending speed for 90 ° approx: 3 selec. Connection: 380 V, 2.2 kWWeight approx: 1000 kgSpace required with / without mandrel holder W x L x H: 1600 x 1200/3900 x 1170 mmWith- mandrel bending length 2000 mmused, despite the year of constructionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Module rack trolley rollable with SK50 holders and mounting accessories Width approx. 110cm SK50 cutter head diameter 200mm SK50 cutter head diameter 125mm SK50 reduction to MK2 SK50 reduction to SK40 SK50 corrugated spider holder 8mm SK50 cutter mandrel 32mm SK50 corrugated spider holder 25mm SK50 cutter mandrel 32mm with disc cutter 125x10mm SK50 Reduction MK4 SK50 roughing cutter 50mm SK50 reduction SK40 with boring head 60-100mm SK50 Reduction MK2 SK50 holder with roller end cutter 84x100 with internal cooling SK50 reduction MK2 with chuck 0-10mm SK50 reduction SK40 with cutter head 65mm SK50 corrugated mandrel holder 12mm SK50 Reduction MK4 SK50 holder with cutter head diameter 200mm SK50 corrugated mandrel holder 20mm SK50 corrugated spider holder 16mm SK50 holder with cutter head 125mm SK50 roller milling cutter 80mm SK50 holder with corner knife head 80mm  ...

sheet width - max.: 0500 mm coil weight: 3,00 t coil internal dia.: 370 - 510 mm total power requirement: kW weight of the machine ca.: 0,54 t dimensions of the machine ca.: 1,25 x 1,08 x 1,67 m material width (previously) 300 mm mandrel length 500 (510) mm mandrel – Ø (expandig range) 370 – 410 mm dto. with segments 470 – 510 mm height floor - middle of mandrel 1.050 mm height upper edge decoiler construction - middle of mandrel 860 mm accessories: construction 3-segment-construction expanding process mechanically no. – limiting arms 5 dimension – limiting arms (l x h) 400 x 60 mm brake unit mechanically (via star grip) no. – segments 9 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0600 mm coil weight: 3,00 t coil internal dia.: 465 - 530 mm total power requirement: kW weight of the machine ca.: 2,45 t dimensions of the machine ca.: 2,72 x 1,70 x 2,40 m material width (previously) 400 mm mandrel length 630 (655) mm mandrel – Ø (expanding range) 465 – 530 mm height floor - middle of mandrel 1.450 mm height upper edge decoiler construction - middle of mandrel 1.050 mm working direction (previously) right - left accessories: construction 3-segment-construction decoiler movable on base frame hydraulically press arm hydraulically press roll not driven expanding process mechanically decoiler motor driven (via chain) power 3,0 kW no. – limiting arms 6 dimension – limiting arms (l x h) 410 x 180 mm valve components mounted at decoiler construction control unit (breaker unit) with cable hydraulic unit not available The data for this ad was cre ...

HOBBING MACHINE - LIEBHERR S 800 /Lorenz workpiece with counter holder 600mm workpiece with retracted holder 800mm distance of the milling carriage 360mm Largest millable pitch b. largest workpiece 5Pi in the normal power range 8 Pi Receiving cone - milling spindle MK 5 Milling mandrel 22/27/32/40mm milling cutter diameter 186mm cutter length 170mm milling cutter displacement 80mm Milling cutter speeds 40-220 rpm Feeds infinitely variable/vertical Feeds infinitely variable/horizontal Feeds infinitely variable / tangential Clamping table without water rim 550mm Clamping table bore 100mm Mandrel cone MK5 Mandrel 36mm COMPLETE TECHNICAL DATA CAN BE SENT BY E-MAIL BE SENT. ACCESSORIES SEE PICTURES. 1xpallet interchangeable wheels 1xPalette hobs 1xpallet clamping/mandrel Documentation Machine feet Chbaacmi7q Dimensions: LxWxH 3.6x1.8x1.9 meters Weight a ...

Qty. 1 Second-hand extrusion press Manufacturer: Loewy Type: 4 column floating - mandrel piercing press Aprox year of manufacture: 1939 Container size (dia.): 406 & 508 mm 16" and 20" Container size (length): 1350 mm Billet size (length): 1000 mm Nominal Extrusion Force: 5000 MT Nominal Piercing Force (Max): 740 MT Mandrel arresting Force floating mandrel Stroke Main ram: 2750 mm Piercer : 1200 mm

Electro-hydraulic. Mandrel bending machine make TRANSFLUID type DB 628 ST SPSMasch. -No: 7507/2/2000 year 2000Technical specifications:Pipe diameter 6 - 30 mmMax. Wall thickness 2 mmSolid material up to 20 mmBending radius min. 10 mmBending angle up to 190 °Bending time at 90 ° 3.0 sec.Mandrel length / pipe pushing length 3000 mmRadius range max. 85 mmBending height 1050 mmfreestanding bending head 850 mm lg.Head for clear width between 2 bends of 300 mm distanceNominal pressure 250 barOperating pressure 200 barDrive power 2.2 kWDimensions L x W x H 3500 x 900 x 1300 mmWeight approx 800 kgWith- PLC control, bending process semi-automatic or manually selectable- Storage of 500 tubes with 20 different positions each- hydraulic drive, right-bending- Triggering optionally via foot or hand switch- Bending direction clockwise, hollow shaft for small radii- Tool reset by hand, hydraulic count ...

Transfluid EDB 642CNC Tube Bender Year 2020 ROUND TUBING MILD STEEL 1.65" X 0.118" ROUND TUBING STAINLESS STEEL 1.65" X 0.059" MAXIMUM MOMENT OF RESISTANCE 3.4 CM3 (S235) BENDING ANGLE UP TO 180 DEGREES +10 DEGREES SPRING BACK BENDING TIME MAXIMUM 180 DEG./SEC (FRONT FEED) SPEED OF FRONT FEED 1600 MM SEC SPEED OF ROTATION MAXIMUM 450 DEGREE/SECOND REPETITION TOLERANCE BENDING +/-0.05 DEGREES REPETITION TOLERANCE LENGTH +-0.05 MM REPETITION TOLERANCE ROTATION +/-0.05 DEGREES ARBOR LENGTH/USABLE LENGTH 120" RADII MAX. 6.61" BENDING HEIGHT 45.27" BOOSTING FORCE LENGTH POSITIONING 2.5 KN APPROXIMATE DIMENSIONS 296" X 63" X 63" APPROXIMATE WEIGHT 12,100 LBS. EQUIPPED WITH: TRANSFLUID CNC CONTROL WITH WINDOWS 10 OPERATING SYSTEM AND 22" WIDESCREEN MONITOR SERVO ELECTRIC POWER BENDING AXIS SERVO ELECTRIC POSITIONING OF THE ROTATION LENGTH ALL OTHER AXIS SERVO ELECTRIC  ...

Martin T25 swivel spindle cutter with 5 axis control Brand: Martin Type: T25 M-No.: V232232 Year of construction: 1996 Engine power: 7.5 / 9.5 kW or 10 / 13 HP, 2 speeds Dalander engine Swivel milling spindle: -5° - +45° Milling mandrel ø30 mm Spindle holder: ISO quick change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,500 mm and table distribution (= extendable support) Control panel: NC control at eye level with LCD screen Spindle height NC-controlled electromotive angle adjustment (program controlled or manual operation) Inclination -5° - +45° NC-controlled electromotive spindle height adjustment (program controlled or manual operation) Stops: NC-controlled electromotive of the two stops adjustment to the milling mandrel (program controlled or manual operation) NC-controlled ele ...

Fine thread mandrel, thread mandrel LMW SCHMALKALDEN M 42 x 1,M 42 x 1,5 Thread: M 42 Pitch: 1.5 Tolerance class: 6H Outer diameter: Ø 42 mm Gauge mandrel length: 13 mm Total length: 114 mm used, tested ! Dimensions ( packaging ): 120 x 45 x 45 mm

Fine thread - good mandrel, thread mandrel LMW SCHMALKALDEN M 42 x 2,M 0 Thread: M 42 Pitch: 2.0 Tolerance class: 6H Outer diameter: Ø 42 mm Gauge mandrel length: 22.5 mm Total length: 119 mm used, tested ! Dimensions ( Packaging ): 125 x 45 x 45 mm

Pipe thread Gut-mandrel, thread mandrel LMW SCHMALKALDEN R1 1/2 Thread: R1 1/2 ( inch ) Outer diameter: Ø 48 mm mandrel length: 25 mm Total length: 119 mm used, tested ! Dimensions ( packaging ): 125 x 50 x 50 mm

Thread good mandrel, thread mandrel LMW SCHMALKALDEN M38 x 1.5 thread: M38 pitch: 1.5 outer diameter: Ø 38 mm mandrel length: 16 mm without handle used, tested ! Dimensions ( packaging ): 40 x 40 x 20 mm

Collet holder, tool holder, tool holder, milling holder, milling tool, mandrel, collet mandrel, collet -Manufacturer: Thumper, collet mandrel with collet -Type: SP 9 -Clamping range: 55 - 70 mm -Collet sleeve: Ø 54 mm -Total dimensions: Ø 80 x 330 mm -Weight: 6.0 kg

Collet holder, tool holder, tool holder, milling holder, milling tool, mandrel, collet mandrel, collet -Manufacturer: Thumper, collet mandrel with collet -Type: SP-TR-9 -Clamping range: 55 - 70 mm -Collet sleeve: Ø 54 mm -Total dimensions: Ø 78 x 330 mm -Weight: 6.0 kg

Tube bending machines PROVAR 5-90 U-D, working length: 4500 mm The PROVAR 5-90 U-D (Series 90) is a fully automatic, 5 axes tube bending machine: bending (Y axis), advancement (X axis) and rotation (Z axis). The PROVAR 5-90 U-D can bend tubes up to 90 mm in diameter and lateral movement of the positioner and the mandrel (axes B1 and B2). The PROVAR 5-90 U-D can bend tubes up to 90 mm in diameter and has two levels of equipment per fixed and variable radius or two different fixed radii. The following are fitted as standard: - heat exchanger; - early mandrel extraction; - automatic mandrel lubrication.

Hydraulic cnc mandrel bender for pipes and profiles The rasi numerical bender for pipes and profiles ensures bending without deformation, distortion or change in diameter. The bent pipes retain their shape and the fitted mandrel prevents the formation of folds and deformations. Possibility of 3D mandrel bending from pipes with a diameter of 10 to 60 mm and profiles from 10x10 mm to 40x40 mm. Bending tools included: cylindrical: -profile 20x10 -profile 40x20 - pipe fi 10 - pipe fi 20 - pipe fi 30 - pipe fi 40 pin: -profile 20x10 -profile 40x20 - pipe fi 10 - pipe fi 20 - pipe fi 25 - pipe fi 30 - pipe fi 40 - pipe fi 17.2 - pipe fi 21.3 - pipe fi 26.9

HYDROIL CHA 80 mandrel bender. This machine has been completely refurbished with change of all hydraulic pipes, pressure gauge, joints and screws + epoxy paint Description: - delivered with 15 complete sets of tools ranging from diameter 17.2mm to diameter 50mm, including certain diameters with 2 different radii (new market value of a single tool: €2,500) - hydraulic clamping vice - hydraulic tightening of the follower guide - hydraulic feedback from the mandrel at the end of bending to facilitate extraction of the tube - mandrel holder rod length 2 meters (so reduced bulk) - possibility of increasing the mast, therefore the working length - maximum capacity: diameter 50mm, thickness 2 mm in steel - maximum bending angle amplitude: 180° - rotation speed of the bending roller: 28°/sec. - torque available at maximum pressure: 654m daN - electric motor: 5.5HP, 1500 rpm - ...

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 30 mm   external diameter max.: 120 mm   length min.: 3000 mm   lenght max.: 7500 mm PRODUCT (PROFILE, TUBE)   length min.: 4000 mm   lenght max.: 8800 mm CHARACTERISTICS DRAWING MACHINE   force: 450 kN   drawing length max.: 8800 mm   number of parallel trains / strands max.: 1   speed max.: 100 m/min   drive system -drawing machine-: chain Function: Semi-automatic (pull chain runs forwards, front bench can be rotated) Products: Round tubes, precision tubes, cardan shafts, squares max. drawing rod / pointed end diameter: 80 mm min. drawing rod / pointed end diameter: 25 mm max. drawing rod / pointed end length: 220 mm min. drawing rod / pointed end length: 170 mm mumber of drawing jaws: min. 1 jaw and ...

FEEDSTOCK TUBE   external diameter min.: 25 mm   external diameter max.: 55 mm   length min.: 3500 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   length min.: 5000 mm   lenght max.: 13500 mm CHARACTERISTICS DRAWING MACHINE   force: 320 kN   drawing length max.: 13500 mm   number of parallel trains / strands max.: 3   speed max.: 100 m/min Function: Automatic (manual threading, pull chain runs forwards and backwards, front bench can be swiveled vertically) Products: Round tubes (mostly shock absorbers), semi-finished or finished products Modernized: 1999 new pulling belt and brake 2022 pulling chain partially renewed max. drawing rod / pointed end diameter: 40 mm min. drawing rod / pointed end diameter: 14 mm max. drawing rod / pointed end length: 170 mm min. drawing rod / pointed en ...

CONTROLS   PLC SIEMENS S7-400 FEEDSTOCK TUBE   external diameter min.: 22 mm   external diameter max.: 90 mm   length min.: 6000 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 17.5 mm   external diameter max.: 80 mm   length min.: 7000 mm   lenght max.: 13500 mm CHARACTERISTICS DRAWING MACHINE   force: 1000 kN   drawing length max.: 13500 mm   number of parallel trains / strands max.: 3   speed max.: 67.5 m/min   main drive power: 800 kW Modernized:2011 new drawbar mouth2019 new collar bearing, draw bench chain and gearbox2021 new front benchPulling capacity+ 1-fold: 500kN, no short-term overload+ 2-fold: 1000kN, no short-term overload+ 3-fold: 1000kN, short-term overload 1300kN + Rohrbremse Attachments: + tube brake m ...

used vertical tool presetting device in very good condition, ready to use Recording: SK 50 max. tool length: 460mm max. tool diameter: 400mm Optics: 20x optical magnification Energy supply: Current: 220Volt 50 HZ luminous flux connection Pneumatics: 6 bar air pressure connection Machine space requirement: (w x t x h) approx. 1400 x 800 x 1700mm (without operator and service environment) Accessories / Optional equipment: â?¢ Machine cabinet with compartment â?¢ Calibration mandrel / reference mandrel â?¢ Adapter holder Iso 50 to Iso 40 for SK 40 tools Bdujvng8ha â?¢ Adapter holder Iso 50 to VDI 30 â?¢ Adapter holder Iso 50 to VDI 20 â?¢ Adapter holder Iso 50 on special tool holder â?¢ Additional measuring clock holder â?¢ Tool positioning device to 4 x 90° â?¢ Operatin ...

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

3″ x .125″ Oto Mills – Someron HF Tube Mill Make (Entry Section): Oto Mills, Make (Forming & Sizing): Somenor, Maximum Pipe Diameter: 76mm, Wall Thickness: 0.8mm – 3mm, Shaft Diameter: 60mm Direction: Right to Left. Abbel Jib Crane, Mandrel Uncoiler, Weight Capacity: 10,000Lb, Powered Mandrel Expansion. Automatic Shear & End Welder, Hydraulic Shear, Automated Torching Head, Vertical Otto Mills Accumulator with DC Motor Drive, Driven Entry & Exit Guiding Rolls, Driven Entry Pinch Rolls, Adjustable Edge Guides, 5-Roll Coil Flattener. Forming Mill with Six Forming Stands, Seven Side Stands, Individual Gear Boxes, Universal Drive, Complete Set of Second Rafted Forming Stands, Motor: 60HP DC Drive. Welding Section with Emmedi 200Kw High Frequency Welder, 3-Roll Mechanical Squeeze Box, ID Scarfing Head, Powered Bead Re-Winder, Extended Cooling Section. Sizing Mill with Four (4) Sizi ...

Fully hydraulic curved roller Shear make PARX type KRS 2Machine -No: 3728 Series 61/72, year of construction 1973Shearing power b. 40 kg / mm2 strength: 6 mmShearing power b. 70 kg / mm2 strength: 4 mmProjection between stand and knife: 1050 mmStand opening height: 300 mmmin Curve radius: 75 mmmin. Rondendiam.:290 / 180 mmMax. Rondendrm. from 4-corner sheet: 2750 mmminute Flaring rim: 450 mmMax. Beading height: 50 mmMax. Beading radius: 35 mmCutting speed stepless: 0 - 12 m / min.Power requirement: 6 hpWeight: 1.85 t (without mandrel centering)Outside dimensions: 3000 x 900 x 2000 mm(without mandrel centering)With- full hydr. drive- graduated Speed control- Const. Starting and working torque- Automatic workpiece feed- Contour cutting (cropping)- Circular section- Spiral cut- Beading- with adjustable Thorn centeringused, from operational resolution, in good conditionPrice on request.Deliv ...

Electro-hydraulic. Mandrel bending machine Fabr. LANG type EL-OR 50Machine -No: 4125 built in 1981Max. Pipe diameter at 40 kg mm²Radius 3 x outer pipe diameter: 50 x 2 mmMax. Bending radius up to middle pipe: 200 mmminute Bending radius up to inner pipe edge: 35 mmMax. Pipe insertion length: 3000 mmMax. Bending angle: 180 °Bending head speed: 14 rpmtheoretical number of sheets 90 / U.: 900Drive power: 7.5 kWWeight approx: 1800 kgDimensions approx: 4000 x 1300 x 1200 mmWith- Hydraulically powered and working automatically- bending table drive- Tube clamping device with infinitely adjustable clamping pressure- Dornrückzugseinrichtung- Automatic bending roller return device- Hand-operated length stop device- Bend angle selector for settingxa0xa0 4 different bending angles- automatic mandrel lubrication device- Use of running counter-pressure slide rails- Footswitch- without toolsused, in ...

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...