maffei used for sale

Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected

Key data: 3000 , 60

warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX year of construction: 2011 operation hours: 78454 h clamping force: 3000 kN distance between tie bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included: screen text german CEE-socket 16A pressure accumulator for uprated injection speed Handling without safety fencing core pulling hydraulically 2x machine incl. Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 interface for handling Schuko-socket 10A technical data robot-system handling type: Linear manufacture: Wittmann controller: W 833 year of construction: 2011 handling weight: 10 kg X axis:  ...

KRAUSS MAFFEI two shot (2k) KM1300-12000/8000 MX machines -Clamping force : 1300 ton

Berstorff 8inch (200mm) Cold Feed Pin Extruder Manufactured by: Krauss Maffei Berstorff Extruder Type: Vac GE 200 SC, Pin Type No of Pins: 2 X10 + 1X12 (Hydraulic adjustment) Screw Diameter: 8"/200 mm L/D ratio 18:1 Drive: 300 Kw, 1500 RPM Screw speed: 33pm Complete with Control Panel Roller Die Suitable for rubber compounds Year 2009

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009

Inv. Num. : 7019 Type: KM 125-520C1 Producer: Krauss Maffei Created: 2004 Parameters: Duty cycle: 4818 h Clamping force: 125 t Plate dimensions: 745x770 mm Injection weight: 6000 kg

CNC control, control cards, MC3 control, plug-in cards, printed circuit boards, electronics housing -Manufacturer: Krauss Maffei, control module from injection molding machine -Electronic module: HU 100 5089750 3AO63 -Electronic housing: phoenix contact type UEGM -Number: 14x module available -Dimensions: 90/25/H85 mm -Weight: 0.1 kg/pc.

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø x 60mm -Item No.: 401 2627 -Heating power: 670 W -Voltage: 230V -Number: 2x heating tape available -Price per piece -Dimensions: 160/100/H60 mm -Weight: 0.3 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø240 x 135 mm -Item No.: 401 2258 -Heating power: 4200 W -Voltage: 230/400V -Number: 2x heating tape available -Price per piece -Dimensions: 290/255/H135 mm -Weight: 2.8 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 -Heating power: 5500 W -Voltage: 230/400V -Number: 2x heating tape available -Price per piece -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Power supply, converter, power supply, switching power supply, MC3 control -Manufacturer: Krauss Maffei, power supply from injection molding machine -Type: NT 100 -Dimensions: 260/140 / H130 mm -Weight: 5 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump -Double hydraulic pump: from injection molding machine KHS Krauss Maffei KM 1000-5000A -Pump 1: Voith type IPH 6/5-125/50 300 bar - Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher type? -Individual components: filters/valves see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack, hydraulic station, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: Krauss Maffei, hydraulic unit from injection molding machine 90-340 B -Motor: Loher 15 kW / 380 / 660V / 1425 rpm -Individual components: see pictures -Dimensions: 900/520 / H610 mm -Weight: 261 kg

Directional control valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -comes from a Krauss Maffei 1000 t injection molding machine -Machine type: KM 1000/5000A -Valve manufacturer: Bosch -Type: 081WV10P1N126WS024/00AO -Type: 0811 104 124 -Max. Pressure: 315 bar -Tension -Dimensions: 850/600/H550 mm -Weight: 634 kg

Krauss Maffei KM 350-2700 C1 Year : 1996 Weight 19000 kg Clamping force : 3500 kN Voltage : 230 Minimum moulding size in mm : 380 mm Mould opening size : 920 mm Tie bar distance : 710 x 710 mm Maximum produce parts with a shot size : 1433 ccm / 1304 gramm Oil to fill in : 740 l Hours of Production : 87,230 Condition : very good Special features : 4 pcs. hydraulic core pull 2 pcs. air valves hot runner 16 zones color feeder connectivity option

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total production time h 54540/61077/51379 Origin Germany Closing Unit Closing Force 2000 Kn (200T) Inner width between columns (hxv) 560x560 mm Mold opening way 700 mm Min. Mold height 350 mm Pusher distance 200 mm Pusher forward force 58 Kn Injection Unit SP1000 Screw diameter 55 mm L / D ratio 20 Volume 523 Cm3 Weight (PS) 476 g Pump power 37 kw Heater power 18 kw Weight ca. 10 t Length x Width x Height 5320x1750x2230 mm price for one machine

Key data: 1300 kN, 40 mm

Stock No.: 503267 Manufacturer: KRAUSS MAFFEI Type: KM 130-380 CX Control: MC5 Year of construction: 2007 Hours: 48294 h Clamping force: 1300 kN Holm dimension v: 525 mm Holm h: 525 mm Plate size h: 820 mm Plate size v: 845 mm Min. installation height: 300 mm Plate dread max.: 900 mm Aperture travel: 600 mm Screw diameter: 40 mm Displacement: 201 ccm Spray pressure: 1860 bar Machine dimensions LxWxH: 5.7m x 1.6m x 2.1m Total Weight: 7800KG Equipment On-screen text German CEE socket 16A Core hoist hydraulic 2x Air valve 1x Air valve 2x Machine with water battery Machine without material hopper Machine without suction conveyor Levelling elements Interface EUROMAP 67 Interface for coloring device Selection Unit

Key data: 6500 kN, 1650 g/PS, 90 mm

1.0 pcs. Injection molding machine with robot Manufacturer: KRAUSS MAFFEI Type: KM650-2700C2 Year of construction: 2003 Clamping force: 650 tons Tie bar spacing (HxV) 1,000 x 930 mm Screw DN: 90 mm Displacement: 1,813 cm³ Moulded part weight: 1,650 g/hp Control: MC4 Equipment of the machine: - 2 pieces of core pulls movable plate - 2 pieces of core pulls fixed plate -Closing nozzle hydraulic -Robot: Manufacturer WITTMANN, type: W643, year of manufacture: 2003 Travels: Y = 2,400 mm, X = 1,200 mm, Z = 3,000 mm

Key data: 800 kN, 35 mm

warehouse no.: 503232 manufacturer: KRAUSS MAFFEI type: KM 80-380 EX controller: MC5 year of construction: 2008 operation hours: 49673 h clamping force: 800 kN distance between tie-bars h x v: 520 x 420 mm size of mould plates h x v: 640 x 740 mm min. mould height: 300 mm max. open daylight: 790 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 2429 bar equipment included: screen text german CEE-socket 16A air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB Schuko-socket 10A mould heating 24x measures of machine l x w x h: 5.35m x 1.7m x 2m total weight: 6500KG

Key data: 1000 kN

Inv. Num. : 7219 Type: 100-380 AX Producer: Krauss Maffei Created: 2010 Parameters: Clamping force: 1000 kN Screw diameter: 40 mm Injection capacity: 200 cc Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 410 mm Opening the mold: 350 mm Operating pressure: 1860 bar Machine length: 4950 mm Machine width: 1700 mm Machine height: 2000 mm Injection weight: 5150 kg

KRAUSS MAFFEI 125 T injection press in good condition Reference: 125-460 C1 Closing unit: Closing force: 125 tonnes Opening stroke: 900 mm Distance between column: 470 x 470 mm Mold min. : 300mm Max mold: 600 mm Tray dimensions (h x v): 770 x 750 mm Injection unit Screw diameter: 40 mm Injectable weight: 195 g Injection pressure: 2112 bars Measurements and weights Dimensions: 4.5 x 1.5 x 2.2 m Machine weight: 4100 kg Euromap 12 robot interface

Krauss Maffei KM 390-160 CZ Closing unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 400 Maximum opening width [mm] 1000mm Injection unit Screw diameter [mm] 40 Injection volume [cm3] 204 Injection weight [g] 186 Injection pressure [bar] 1860 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 21 Dimensions and weight Net weight with control cabinet [t] 7 Dimensions (length x width x height) [m] 4.5 x 1.5 x 3.7

Krauss Maffei KM 80-380 CX hydraulic injection molding machine Year of production - 2022 Fully hydraulic closing system. The MC 6 control system is based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5” control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 40 mm, with a return lock and an open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit – Mold clamping force: kN 800 – Mold opening force: kN 55 – Dimensions of the mounting plate (h x v): mm 670 x 670 – Clearance between columns (h x v): mm 420 x 420 – Mold opening stroke: mm 500 – Minimum mold height: mm 250 – Opening width: mm 750 – Ejector stroke: mm 150 – Ejector force forward/reverse: kN 23 / 10 injection unit  ...

Krauss Maffei KM 200-1400 C2 + injection molding machine Year of production - 2004 Fully hydraulic locking system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system complete plasticizing system for thermoplastics version with abrasive protection, screw diameter 60mm, with back-lock and open nozzle. Closing force 200 T Screw diameter 60 mm Clearance between columns X 560 mm Clearance between Y columns 560 mm Injection volume 679 cm³ Shot weight 476 g The specific injection pressure is 2000 bar Tool plates length 915 mm Tool plates width 910 mm Robot interface Length x width x height 5700.0 × 1700.0 × 2200.0 Weight 10,500 kg

Krauss Maffei KM 300 – 1900 C2 injection molding machine Year of manufacture -2000 Control : MC4 Closing unit Clamping force: 3000 kN Mold opening force, max.: 160 kN Sliding force of the moving plate Opening: 86 kN Sliding force of the moving plate Closing: 68 kN Mold plate size (h x v): 995 mm x 1050 mm Distance between columns (h x v): 630 mm x 630 mm Mold opening stroke: 820 mm Min. mold height: 330 mm mold height: 1150 mm Hydraulic ejector - stroke: 200 mm Forward/reverse ejection force: 58/28 kN injection unit Screw diameter: 70mm Ls/D ratio: 20 Injection pressure: 1778 bar Displacement: 1047 cc Shot weight, PS: 953 g Injection speed: 400cc/sec Screw speed: 218 1/min Plasticizing capacity max.: 75 g/s Nozzle pressure: 110 kN Electrical and hydraulic equipment Pump motor nominal capacity: 55 kW Installed heating power: 30 kW Adjustable barrel heating zo ...

Supplied with magnetic plates for assembly of molds Krauss Maffei KM 3200-17200 MX Injection molding machine Year of production - 2006 Clamping force - 32,000 kN The dimensions of the boards - 2270 X 1820 mm Clearance between columns - 1100 X 2000 mm Screw diameter - 135 mm Specific injection pressure - 1784 bar Injection weight - 6860 g Injection volume - 9662 ccm The machine is to be picked up in December 2022 Machine without robot Worked - 62,000 man-hours The amount of oil - 2400 liters Dimensions: 16.04 X 5.21 X 4.07 m Weight - 240 tons

Krauss Maffei KM 320 – 2700 C3 injection molding machine Year of manufacture -2003 Control : MC4 Technical data Closing unit Clamping force: 3200 kN Size of mold plates: 1240 mm x 1240 mm Distance between columns (h x v): 710 mm x 710 mm Mold opening stroke: 769 mm Mold height min.: 120 mm Hydraulic ejector - stroke: 251 mm injection unit – Screw diameter: mm 70 – Ls/D ratio: – 23 – Injection pressure: bar 2389 – Injection volume: cm3 1097 – Injection weight: g 998 – Injection efficiency: cm3/s 393 – Number of screw revolutions: 1/min 272 – Plasticizing efficiency 1): g/s 83/108option – Nozzle pressure force: kN 129 Electrical and hydraulic equipment Adjustable hot runner zones: 20 Hydraulic cores: 2 pcs Euromap connector 12 Hydraulic cylinder tip valve Electric scooping motor Air valves 2 pcs

Krauss Maffei KM 250-1400 C2 Injection molding machine Year of production - 2006 Fully hydraulic locking system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 60 mm, with back-lock and open nozzle Nozzle radius 15mm, nozzle opening 6mm. TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit - Mold clamping force: 2500 kN - Mold opening force: 160 kN - Movement force of the movable plate clamping the mold - - - opening: kN 86 - closing: 68 kN - Mounting plate dimensions (h x v): mm 995 x 1050 - Clearance between columns (h x v): mm 630 x 630 - Mold opening stroke: mm 820 - Minimum mold height: mm 330 - Opening width: mm 1150 - Ejector stroke: mm 200 - Ejector force: 58/28 kN Injection unit - Screw diameter: mm 60 - Injec ...

Krauss Maffei KM 125-390 C2+ injection molding machine Year of production - 1999 Fully hydraulic closing system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 40 mm Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit – Mold clamping force: kN 1250 – Mold opening force: kN 70 – Dimensions of the mounting plate (h x v): mm 745 x 770 – Clearance between columns (h x v): mm 470 x 470 – Mold opening stroke: mm 600 – Minimum mold height: mm 300 – Opening width: mm 900 – Ejector stroke: mm 150 – Ejector force forward/reverse: kN 22 / 10 injection unit – Screw diameter: mm 40 – Ls/D ratio: – 20 – Injection pressure: 1860 bar – Injection volume: cm3 204 – Inject ...

Krauss Maffei KM 300-1000 CX injection molding machine Year of production - 2010 Fully hydraulic closing system. MC 5 control system with color monitor, integrated control panel and built-in disk drive. SP 1000 plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 50 mm, with a return lock and an open nozzle Nozzle radius 15 mm, nozzle opening 3 mm. Closing unit – Mold clamping force: kN 3000 – Mold opening force: kN 169 – Dimensions of the mounting plate (h x v): mm 995 x 1050 – Clearance between columns (h x v): mm 630 x 630 – Mold opening stroke: mm 820 – Minimum mold height: mm 330 – Opening width: mm 1150 – Ejector stroke: mm 200 – Ejector force forward/reverse: kN 58/28 injection unit – Screw diameter: mm 50 – Ls/D ratio: – 22.0 – Injection pressure: bar 2304 – Injection volume: cm3 432 – Inje ...

Krauss Maffei KM 200-1000 CX Year of production - 2021 Fully hydraulic locking system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5 ″ control panel with a color touch screen. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 55 mm, with back-lock and open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit - Mold clamping force: 2000 kN - Mold opening force: 101 kN - Mounting plate dimensions (h x v): mm 915 x 915 - Clearance between columns (h x v): mm 560 x 560 - Mold opening stroke: mm 700 - Minimum mold height: mm 350 - Opening width: mm 1050 - Ejector stroke: mm 200 - Ejector force forward / reverse: 58/28 kN Injection unit - Screw diameter: mm 55 - Ls / D ratio: - 20.0 - Injection pres ...

Krauss Maffei KM 110-520 C1 injection molding machine Year of production - 2004 Fully hydraulic locking system. MC4 control system with color monitor, integrated control panel and built-in disk drive Plasticizing system 1 complete plasticizing system for thermoplastics, abrasive version, 45 mm screw diameter, with backlatch and open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit: - Mold closing force: 1100 kN - Mold opening force: 70 kN - Movement force of the movable plate clamping the mold - - - opening: 35 kN - closing: kN 28 - Mounting plate dimensions (h x v): mm 745 x 770 - Clearance between columns (h x v): mm 470 x 470 - Way of opening the mold: mm 600 - Mold development height: mm 300 - Opening width: mm 900 - Ejector stroke: mm 150 - Ejector force: 22/10 kN Injection unit: - Screw diameter: mm 45 - Injection pressure: 1878 bar - In ...

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping force 6500 kN Tool opening force, max. 346 kN The size of the plates (height x height) 1620 x 1470 mm clearance between columns (height x height) 1000 x 930 mm mold opening path 1150 mm mold mounting height min. Opening width 540 mm 1690 mm Ejector stroke 250 mm Ejector force forward / reverse 226 kN Injection unit Screw diameter 90 mm Ls / D ratio 20 Injection pressure 1742 bar shot weight 1742 g Plasticizing flow max. 83 g / sec nozzle pressure 173 kN Electro-hydraulic devices Rated power of the pump motor 90 kW Installed heating power of 36 kW Cylinder heating control zones 7 Oil filling 1240 ltr. Dimensions and weights Space requirement approx. 9.06 x 2.85 x 2.60 m Gross weight is 30,870 kg Tool weight 11400 kg

KRAUSS MAFFEI KM 650-3500 C1 injection molding machine Year of production - 2003 Robot name-WITTMANN W 632 Closing force. [tons] - 650 Min. Height of the form [mm] -600 Max. mold height [mm] -1150 Column spacing (hxv) in the light (mm) - 1000 x 930 Mounting plates size - 1490 × 1440 Ejector stroke (max) [mm] -250 Screw diameter [mm] -90 Injection weight [g] -2500 Oil quantity [liter] -1000 Injection sequence in mold -2 Number of hydraulic cores S / R- 0/2 The maximum distance between the plates [mm] -1500

Krauss Maffei KM 420-3000 CX Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold height [mm] min 580mm Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1232 Shot weight [g] 1121 Injection pressure [bar] 2389 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 29 Dimensions and weight (approximately) Net weight with control cabinet [t] 22,3 Dimensions (L x W x H) [m] 7,32 x 2,49 x 2,38

Krauss Maffei KM 150-520 C2 with the LR 100 robot Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 780 x 790 Clearance between columns (hxv) [mm] 500 x 500 Maximum opening width [mm] 900 injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 7.1 Dimensions (L x W x H) [m] 4.66 x 1.51 x 2.19

Krauss Maffei KM 160-750 CX Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 820 x 845 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] min 300 mm Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Shot weight [g] 357 Injection pressure [bar] 1892 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 10,97 Dimensions and weight (approximately) Net weight with control cabinet [t] 6 Dimensions (L x W x H) [m] 4,6 x 1,6 x 2,1

Krauss Maffei KM 160-380 CX Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 820 x 845 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] min 300 mm Maximum opening width [mm] 1250 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 201 Shot weight [g] 183 Injection pressure [bar] 1860 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 10,97 Dimensions and weight (approximately) Net weight with control cabinet [t] 6 Dimensions (L x W x H) [m] m 4,6 x 1,6 x 2,1

Krauss Maffei KM 450-3500 C3 Closing unit Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1270 x 1200 Clearance between columns (hxv) [mm] 900 x 800 Min./max. mold height [mm] min 480 Maximum opening width [mm] 1650 Injection unit Screw diameter [mm] 90 Injection volume [cm3] 1953 Injection weight [g] 1777 Injection pressure [bar] 1742 Electrical and hydraulic equipment Rated power of the pump motor [kW] 90 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 26.3 Dimensions (length x width x height) [m] 7.98 x 2.35 x 2.51m Pressure tank for increased injection power. The screw is driven by an electric motor Air core Hydraulic core 10 x rotameters Euromap 67

Krauss Maffei KM650-5700CM Closing unit Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1550 X 1440 Clearance between columns (hxv) [mm] 1000 X 930 Min./max. mold height [mm] min 600 Maximum opening width [mm] 1750 Injection unit Screw diameter [mm] 95 Injection volume [cm3] 2956 Injection weight [g] 2111 Injection pressure [bar] 1795 Electrical and hydraulic equipment Rated power of the pump motor [kW] 110 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 39.5 Dimensions (L x W x H) [m] 9.36 x 2.65 x 2.43

Producer KRAUSS MAFFEI Type KM 250/1400 CX Year 2010 Clamping unit Clamping force 250 ton Opening stroke 820 mm Distance between tie bars 710 x 630 mm Mould height min. 480 mm Opening width 1300 mm Injection unit Screw diameter 55 mm Injection volume 570 cm³ Shot weight 519 g Injection pressure 2387 bar Measurements and weight Dimensions 6.1 x 2.2 x 2.3 m Machine weight 15000 kg

Inv. Num. : 7218 Type: 80-380 CX Producer: Krauss Maffei Created: 2008 Parameters: Clamping force: 800 kN Screw diameter: 40 mm Injection capacity: 201 cm³ Injection mass: 183 g Height of the clamping plate: 670 mm Width of clamping plate: 670 mm Distance between uprights (horizontal): 420 mm Distance between uprights (vertical): 420 mm Opening the mold: 500 mm Injection weight: 3,900 kg

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

This Krauss-Maffei 150-700 C2 Injection moulding machine was manufactured in the year 2003 in Germany. It is equipped with a clamping force of 1500 kN, a SP 700 injection unit with a screw diameter of 50 mm. Shot weight for PS is at 343g. See video gallery for more impressions. The injection moulding machine has 76901 cycle hours and 90924 machine on hours.

This Krauss Maffei 1300/14700 MC Injection moulding machine was manufactured in the year 1998. It is equipped with a Siemens S7 control unit. The machine has a clamping force of 13000 kN and a screw diameter of 130 mm. See photo and video gallery for more details.

This KRAUSS MAFFEI 150-700 C2 Injection moulding machine was manufactured in 2000 in Germany. This machine offers a clamping force of 1500 kN and features a mold mounting platen sized at 780 mm x 790 mm. With a tool opening stroke of 600 mm and an opening width of 900 mm. Screw diameter options include 45 mm, 50 mm, and 55 mm, while injection pressures range from 1564 bar to 2336 bar. The screw speed reaches up to 356 rpm, with a dry running speed of 1700 l/min. It requires approximately 345 liters of oil filling. Contact us anytime for further information.

Key data: 800 kN

Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Spray weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touchscreen Additional equipment: Euromap 67 Robot Interface Control with air valve Hydraulic core pull x 1 Injection unit hardened - Bimetal Sprue Picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to buy a Moretto raw material feeding system at an additional cost The set includes: - Screw dosing unit, volumetric with container - Conveyor with proportional valve Metrics: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heat ...

Clamping force: 1100kN, tie bar distance: 470x470mmm, opening stroke: 1000mm, screw diameter: 40mm, max. stroke volume: 201cm³, controls: MC5, length: 4600mm, width: 2650mm, height: 2250mm, weight: 7.9t, operational hours counter: 65,200h, with Krauss Maffei LR100, 6x hoist channel control points, 4x core pull, blow-out unit, pressure accumulator, separating flap, energy saving circuit, ALS interface, 20mA interface and colour metering unit interface.

Type of machine: KM 200-1400 C2 Year of construction: 2000 Shipping time: Immediately Cargo base: From site Control type: MC4 Screen text: German Hours of operation: 57000 h Price: On request Technical details Clamping unit Clamping force: 2000 kN Tool opening force, Max: 101 kN Driving force open movable plate: 50 kN Driving force close moving plate: 42 kN Mounting plate (h x v): 915 mm x 915 mm Clear width (h x v): 560 mm x 560 mm Tool unclamping stroke: 700 mm Min. mould installation height: 350 mm Opening width: 1050 mm Ejector stroke: 200 mm Ejector force forward/back: 58/28 kN Injection unit Screw diameter: 55 mm Ls/D ratio: 23 Injection pressure: 2380 bar Displacement: 570 cc : Shot weight PS 519 g Injection power: 713 CC/s Screw speed: 259 1/min Plasticizing power Max: 49 g / s Nozzle system power: 110 kN Electro-hydraulic equipment Pump motor power: 45 kW Installed power: 23 kW  ...

110 Ton Distance between columns : 470 mm x 470 mm 250 gram