336 offers

Category: 301: injection moulding machines
New in: 1998
Price: request quote
Location: Land-de DE
Seller: Maschinenhandel Kmet

Year of construction 1998 Clamping force: 250 to. Screw diameter: 60 mm Injection pressure: 2000 bar Stroke volume: 679 cm³ Shot weight: 618 g tie bar distance: 630 x 630 mm Size of platens: 995 x 1050 mm mould installation height: 330 mm Robot Engel of year of manufacture 2002

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Conical dryer (1x), Make Krauss Maffei Verfahrenstechnik GmbH, Type TMD 0,25/160 Titus-Mixer-Dryer, New 1995, Material stainless steel (1.4571), Capacity 380 Ltr, Useful capacity 250 Ltr, Largest cone diameter 1016mm, Cone height 1066mm, Dished top, Stainless steel arm , Mixing screw jacketed (6 Ltr), Motor 4,0 KW + 1,5 KW, 380 Volt (Ex), Working pressure vac/3 bar, With jacket (96 Ltr), Working pressure 6 bar, Max. temperature 165 Degr. C., Bottom outlet dia. 150mm, Mach.No. 7005 / 742904/3, Mounted on frame, With switchgear, Floorspace 2,0x2,0 M, Total height 3,5 M, Weight 2650 KGCONICAL DRYERSDRYERS > CONICAL DRYERS

Category: 301: injection moulding machines
New in: 2000
Price: request quote
Location: Land-de DE
Seller: Maschinenhandel Kmet

Built in 2000 Clamping force: to 420. Screw diameter: 90 mm Shot volume: 1813 cm³ Shot weight: 1650 g Tie bar distance: 800 x 800 mm new pump and new seals The machine has a problem with the hard disk!

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Rotating vacuum filter (1x), Make Krauss Maffei, Type SZ-Filter 0,25 m2, No 5514, New 1978, Material stainless steel, Filter surface 0,25 m2, Drum sizes dia. 500x165mm, Motor 0,28 KW, 220/380 Volt (Ex), With variable speed drive, With stirrer, With knive discharge Schaberabnahme, With roll discharge Walzenabnahme, With wire discharge Schnürenabnahme, With vacuum pump (2x), Motor 0,55 KW, 220/380 Volt (Ex), With vacuum vessel (2x), Mounted on mild steel frame, With switchgear, Floorspace 2,2x1,2 M, Total height 2,2 M, Weight 920 KGROTATING VACUUM FILTERSFILTERS > ROTATING VACUUM FILTERS

Category: 102: lathes
New in: 1980
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

GO: 2008 New control system: Maffei 859 DUAL New ball screw New Engine New Guides Accuracy 0:01 Machine was little worked after the GO: (only 100 hours) Control system: MEFI CNC 859 DUAL Table diameter: 1250 mm Max. Workpiece weight: 6000 kg Max. Workpiece diameter: 1500 mm Max. Workpiece height: 900 mm Motor power: 65 kW Machine dimensions : 3440 x 3030 x 5100 mm Machine weight: 18000 kg Accessories: Cooling Clamping jaws hydraulically Tool changer Central lubrication

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Conical mixer Cone screw mixer (1x), Make Krauss Maffei, Type Titus, New 1981, Material stainless steel (1.4541), Capacity 37.500 Ltr. (Usefull 35.600 Ltr.), Largest cone diameter 4000mm, Cone height 5805mm, Dished top (870mm), Motor 22,0/11,0 KW, 380 Volt (Ex), Motor 0,37/1,5 KW, 380 Volt (Ex), Working pressure 0,5/-0,6 mbar, Test pressure 0,65 Bar, Half coil jacketed (70 Ltr.), Working pressure 6 Bar, Test pressure 7,8 Bar, Max. temperature 100 Dgr.C., Bottom discharge dia. 150mmCONICAL MIXERSMIXERS > CONICAL MIXERS

Category: 308: other machines for plastic
New in: 1996
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

There are two machines available, including work platform, 2x regenerated polyol pumps, 3x mixing heads, control cabinet, container and accessories, machines can be moved on a track.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Heat exchanger (1x), Make Krauss Maffei AG München, No 351397, New 1968, Heating surface 3,0 m2, Tube material stainless steel, Shell material stainless steel, Cover material stainless steel (1.4571), Tube capacity 18 Ltr, Number of tubes: 52, Tube diameter 10mm, Tube length 1540mm, Working pressure tubes 10 bar, Test pressure tubes 13 bar, Max. temperature 60 Degr. C., Shell capacity 70 Ltr, Working pressure shell vac/10 bar, Test pressure shell 13 bar, Max. temperature 200 Degr. C., Shell connections dia. 125mm + 2x dia. 40mm, Cover connections 2x dia. 25mm, Floorspace 2,0x0,5 M, Weight 260 KGHEAT EXCHANGERSHEAT EXCHANGERS > HEAT EXCHANGERS

Category: 301: injection moulding machines
New in: 2010
Price: request quote
Location: Land-es ES 08018 Kaiserslautern, Trippstadter Str. 110
Seller: GINDUMAC GmbH

OVERVIEW: Brand: Krauss Maffei Model: 160-750 EX Application type: Injection moulding Availability: 01/10/2018 Construction year: 2010 Production hours: 54001 Location: Spain CONTROL UNIT: Brand: Krauss Maffei Model: MC5 INJECTION UNIT: Screw diameter: 50 mm Shot weight: 357,6 g/PS Stroke volume: 393 cm³ Injection pressure: 1982 bar Plasticizing rate max.: 62,2 g/s PS Screw speed: 458 1/min Nozzle pressure: 30 kN CLAMPING UNIT: Clamping force: 1600 kN Opening stroke: 450 mm Mould height min.: 300 mm Mould height max.: 550 mm Ejector stroke: 150 mm Ejector force for / back: 22 kN See full technical specifications of this machine at: abc://bit.ly/2G7dt6p

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Paddle dryer, Make Krauss Maffei Verfahrenstechnik Gbmh, Type Reactotherm, No 08613/1, New 1994, Continuous / Batch, Material stainless steel (1.4404), Capacity +/- 80 Ltr, Trough sizes dia.300mm x1400mm, Inlet (2x) dia.200mm, (1x) dia.150mm, Outlet dia.200mm, Working pressure 10 bar, With jacket, Working pressure 16 bar, Shaft can be heated, Max. temperature 350 gr.C, Motor 2,5-15 KW, 88-460 Volt, 10-60 Hz, Mounted on frame, Floorspace 3,4x1,6 M, Total height 1,4 M, Weight 1800 KGPADDLE DRYERSDRYERS > PADDLE DRYERS

Category: 301: injection moulding machines
New in: 2010
Price: request quote
Location: Land-es ES 08018 Kaiserslautern, Trippstadter Str. 110
Seller: GINDUMAC GmbH

OVERVIEW: Brand: Krauss Maffei Model: 160-750 EX Application type: Injection moulding Availability: 01/10/2018 Construction year: 2010 Production hours: 53253 Location: Spain CONTROL UNIT: Brand: Krauss Maffei Model: MC5 INJECTION UNIT: Screw diameter: 50 mm Shot weight: 357,6 g/PS Stroke volume: 393 cm³ Injection pressure: 1982 bar Plasticizing rate max.: 62,2 g/s PS Screw speed: 458 1/min Nozzle pressure: 30 kN CLAMPING UNIT: Clamping force: 1600 kN Opening stroke: 450 mm Mould height min.: 300 mm Mould height max.: 550 mm Ejector stroke: 150 mm Ejector force for / back: 22 Kn See full technical specifications of this machine at: abc://bit.ly/2GcXi7x

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Peeler centrifuge Horizontalschälzentrifuge (1x), Make Krauss Maffei, Type HZ-80/1 Si, No 11120 / 300 232, New 1991, Material stainless steel (1.4571/1.4581), Basket sizes dia. 800x400mm, Wall thickness 18mm, Max. loading weight 103,7 KG, Motor 37,0 KW, 380 Volt (Ex), Max. basket speed 1900 Rpm, With scraper, Hydraulic operated, With hydraulic unit, Floorspace 1,8x1,6 M, Total height 1,5 M, Weight 3000 KGPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES

Category: 301: injection moulding machines
New in: used
Price: request quote
Location: Land-es ES 39792 Heras/Cantabria, Pol. Industrial de Heras, Parc. 207
Seller: Udo Krichbaum TRANSITUS, S.L.

his independent injection unit can be mounted (vertikal) on each injection moulding machine. It has it own control MC 4 from Krauss-Maffei.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Paddle dryer Reactotherm (1x), Make Krauss Maffei, Type RTD-30 / RTC-60, No 91085/1 (KM order 361 704/1), New 1992, Material stainless steel (1.4571), Capacity 40 Ltr, Trough sizes dia. 270x650mm, Inlet dia. 150mm, Outlet dia. 40mm, Working pressure vac/6 bar, With jacket (5 + 4,6 Ltr), Working pressure 25 bar, Shaft can be heated (0,5 Ltr), Working pressure 25 bar, Max. temperature 400 Degr. C., With adjustable packing glands, Motor 18,5 KW, 400 Volt, Mounted on frame , With filter type MF 0,5 m2, Floorspace 3,3x1,4 M, Total height 3,5 M, Weight 2000 KGPADDLE DRYERSDRYERS > PADDLE DRYERS

Category: 301: injection moulding machines
New in: 2009
Price: request quote
Location: Land-pl PL 75816 Koszalin, Polczynska
Seller: TADplast

with robots, cage and conveyor belt Brand: KRAUSS MAFFEI type: KM 500-3000CX Year of manufacture: 2009 Machine number: 61012947 location: Poland country of origin: Germany technical data screw diameter: 90 mm Hubvolumene: 2036 cc Shot weight: 1853 g Injection pressure: 1466 bar Clamping force: 5000 kN Tie bar distance: 900 x 800 mm Aufspannplattengrosse: 1270 x 1200 mm Tool installation high min.: 480 mm Offnungsweg: 1170 mm Plate distance max: 1650 mm : KW 75 + 36 Hours of operation: 41980 h Dimensions: 7.6 x 2.6 x 2, 5m Weight: 28,800 kg Facilities Language: German Bedinungseinleitung: Yes robot interface: Yes EUROMAP 12

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Peeler centrifuge (1x), Make Krauss Maffei AG München, Type HZ-630 Ph, No 11643, New 1997, Material HASTELLOY (2.4602), Basket sizes dia. 630x330mm, Max. loading weight 52 KG, With hydraulic unit, Motor 1,5 KW, 400 Volt (Ex), Max. basket speed 2365 Rpm, Motor 22 KW, 400 Volt (Ex), With scraper, Mounted on foundation plate, Floorspace 2,5x1,5 M, Total height 1,8 MPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES

Category: 301: injection moulding machines
New in: 2006
Price: request quote
Location: Land-at AT 2512 Tribuswinkel, Sängerhofgasse 42
Seller: Lovric Maschinenhandel e.U.

> KRAUSS MAFFEI KM 1600/12000/390 MXW > Robot included Krauss Maffei > year 2006 Technical specifications: Clamping force: 1600 ton Shot weight (max): 4727 g Distance between tie-bars (H): 1850 mm Distance between tie-bars (V): 1400 mm Platen size (H): 2500 mm Platen size (V): 2100 mm Screw diameter: 105 mm Control type: Electronic MC4 Mould height (max): 2800 mm Mould height (min): 1800 mm Daylight between platens (max): 4300 mm Opening stroke (max.): 2500 mm Ejector force: 14.20 ton Core pulls: Yes Number of core pulls: 6 Screw L/D ratio: 23 Screw speed: 158 rpm Injection volume: 5193 cc Injection pressure: 22 ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Peeler centrifuge (1x), Make Krauss Maffei, Type HZ-630 PH (Pharma), No 60000239, New 2000, Material HASTELLOY C-22 (2.4602), Basket sizes dia. 630x315mm, Wall thickness 15mm, Max. loading weight 54 KG, Motor 18,5 KW, 400 Volt (Ex), Max. basket speed 2270 Rpm, With scraper, Hydraulic operated, With hydraulic unit, Mounted on frame, With switchgear, Floorspace 2,8x1,8 M, Total height 2,4 M, Weight 3500 KGPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES

Category: 301: injection moulding machines
New in: 2004
Price: request quote
Location: Land-de DE 52070 Aachen, Jülicher Str. 336
Seller: EuropNet GmbH

Machine specification Year: 2004 Control unit: MC 4 Injection Unit: .../220 Screw diameter: 30 mm Injection pressure: 2500 bar Injection volume: 85 ccm Shot capacity: 77 g Clamping Unit: KM 80/... Clamping force: 80 t Platen size: 610 x 610 mm Distance between tie bars: 405 x 405 mm Mould height: 350 ... mm Opening storke: 500 mm Max.Daylight: 750 mm Ejector stroke: 150 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 4,0 x 1,4 x 1,9 m Weight: 2.960 kg Equipment: - 2 x Core pull - 8 x Hotrunner controller - Position-regulated screw - 1 x pneumatic needle valve nozzle - Interface for dosing unit and robot

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Paddle dryer Reactotherm (1x), Make Kraus Maffei, Type RTD-8 (total heating surface 0,28 m2), No 8603, New 1990, Material stainless steel (1.4571), Capacity 8 Ltr, Trough sizes dia.170x375mm, Working pressure vac/10 bar, Test pressure 13 bar, With jacket (2 Ltr), Working pressure 16 bar, Test pressure 22,1 bar, Shaft can be heated (1 Ltr), Max. temperature 350 Degr. C., Motor 7,5 KW, 500 Volt (Ex), With variable speed drive (frequency inverter), Mounted on frame, Floorspace 1,8x0,9 M, Total height 1,8 M, Weight 700 KGPADDLE DRYERSDRYERS > PADDLE DRYERS

Category: 301: injection moulding machines
New in: 1998
Price: request quote
Location: Land-de DE 52070 Aachen, Jülicher Str. 336
Seller: EuropNet GmbH

Machine specification Year: 1998 Control unit: MC3F Injection Unit: .../390 Screw diameter: 35 mm Injection pressure: 2429 bar Injection volume: 156 ccm Shot capacity: 142 g Clamping Unit: KM 125/... Clamping force: 125 t Platen size: 745 x 770 mm Distance between tie bars: 470 x 470 mm Mould height: 300 mm Opening storke: 600 mm Max.Daylight: 900 mm Ejector stroke: 150 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 4,3 x 1,6 x 2,2 m Weight: 5.800 kg Equipment: - Robot interface as per Euromap 12 - 2 x Core pull - 2 x Pneumatic valve - Accumulator

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Peeler centrifuge (1x), Make Krauss Maffei, Type HZ-63, No 5952, New 1968, Material stainless steel (1.4571), Basket sizes dia. 630x315mm, Wall thickness 15mm, Max. loading weight 43 KG, Hydraulic drive, With hydraulic unit, Max. basket speed 2400 Rpm, With scraper, Manual operated, Mounted on foundation plate, Floorspace 2,0x1,7 M, Total height 1,9 MPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES

Category: 301: injection moulding machines
New in: 1997
Price: request quote
Location: Land-de DE 52070 Aachen, Jülicher Str. 336
Seller: EuropNet GmbH

Machine specification: Year: 1997 Control unit: MC3F Injection Unit: .../390 Screw diameter: 40 mm Injection pressure: 1860 bar Injection volume: 204 ccm Shot capacity: 185 g Clamping Unit: KM 80/... Clamping force: 80 t Platen size: 610 x 610 mm Distance between tie bars: 405 x 405 mm Mould height: 250 mm Opening storke: 500 mm Max.Daylight: 750 mm Ejector stroke: 150 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 4,1 x 1,4 x 2,1 m Weight: 3500 kg Equipment: - Robot interface as per Euromap 12 - 2 x Core pull - 1 x Pneumatic valve

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Peeler centrifuge (1x), Make Krauss Maffei, Type HZ-63 si, No 9352, New 1982, Material stainless steel (1.4571/1.4581), Basket sizes dia. 630x300mm, Wall thickness 15mm, Max. loading weight 50 KG, Hydraulic drive, With hydraulic unit, Motor 18,5 KW, 380 Volt (Ex), Max. basket speed 2400 Rpm, With scraper, Motor 1,3 KW, 380-420/655-725 Volt (Ex), Mounted on foundation plate, Floorspace 2,5x1,8 M, Total height 1,7 M, Weight 4000 KGPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES

Category: 301: injection moulding machines
New in: 2006
Price: request quote
Location: Land-de DE 52070 Aachen, Jülicher Str. 336
Seller: EuropNet GmbH

Machine specification Year: 2006 Control unit: MC4 Injection Unit: .../2700 Screw diameter: 70 mm Injection pressure: 2389 bar Injection volume: 1097 ccm Shot capacity: 998 g Clamping Unit: 320/... Clamping force: 320 t Platen size: 1060 x 1095 mm Distance between tie bars: 710 x 710 mm Mould height: 380... mm Opening storke: 920 mm Max.Daylight: 1300 mm Ejector stroke: 250 mm Drive power of the hydraulic pump: 75 kW Cylinder heating power: 47 kW General information: Delivery time: Now Machine dimensions(m) LxWxH: 7,3 x 2,1 x 2,5 m Weight: 17000 kg Equipment: - 2 x Pneumatic valve - 3 x Core pull - ?Screw drive by three phase motor ?- R ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Peeler centrifuge (1x), Make Krauss Maffei, Type HZ-25, No 9876, Material stainless steel, Basket sizes dia. 250x125mm, With 2nd Siphon basket, Max. loading weight 4,95 KG, Motor 2,2 KW, 500 Volt (Ex), With variable speed drive, Max. basket speed 4000 Rpm, With scraper, Manual operated, Mounted on frame, Floorspace 0,9x0,8 M, Total height 1,3 M, Weight 350 KGPEELING CENTRIFUGESCENTRIFUGES > PEELING CENTRIFUGES

Category: 301: injection moulding machines
New in: 1999
Price: request quote
Location: Land-de DE 52070 Aachen, Jülicher Str. 336
Seller: EuropNet GmbH

Machine specification Year: 1999 Control unit: MC4 Injection Unit: .../55 Screw diameter: 18 mm Injection pressure: 2400 bar Injection volume: 22,9 ccm Shot capacity: 20,8 g Clamping Unit: KM 40/... Clamping force: 40 t Platen size: 540 x 540 mm Distance between tie bars: 321 x 321 mm Mould height: 200... mm Opening storke: 350 mm Max.Daylight: 550 mm Ejector stroke: 100 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 3,2 x 1,3 x 1,8 m Weight: 2.300 kg Equipment: - Robot interface as per Euromap 12 - 1 x Core pull - 1 x Pneumatic valve - Needle valve nozzle

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Basket centrifuge (1x), Make Krauss Maffei, Type VZO-125/2,5, No 9708, New 1984, Material stainless steel (1.4571), Perforated basket, Basket sizes dia. 1250x630mm, Wall thickness 12mm, Max. loading weight 485 KG, With scraper, Hydraulic operated (motor hydr. unit 0,55 KW 220/380 Volt Ex), Liquid outlet 165x165mm, Motor 17,0/30,0 KW, 390 volt (Ex), Max. basket speed 950 Rpm, Mounted on foundation plate, Floorspace 2,4x1,8 M, Total height 2,8 MBASKET CENTRIFUGESCENTRIFUGES > BASKET CENTRIFUGES

Category: 301: injection moulding machines
New in: 1999
Price: request quote
Location: Land-de DE 08018 Kaiserslautern, Trippstadter Str. 110
Seller: GINDUMAC GmbH

OVERVIEW Brand: Krauss Maffei Model: KM 1600-14700 MC Application Type: Injection Moulding Machine Type: Injection moulding machines Availability: 01/12/2018 Production Year: 1999 Location: Germany Origin Country: Germany Production Hours: 69800 GENERAL DATA Measurements width: 13360 mm Measurements depth: 3850 mm Measurements height: 2835 mm Machine weight: 120000 kg CONTROL UNIT Brand: Krauss Maffei CNC main language: German CNC language customizable: Yes INJECTION UNIT Screw diameter: 130 mm Shot weight: 6945 g/PS Stroke volume: 7632 cm³ Injection pressure: 1931 bar Plasticising rate max: 227 g/s PS Screw speed: 80-120 1/min Heating capacity: 91 k ...

Category: 301: injection moulding machines
New in: 1988
Price: request quote
Location: Land-ch CH Switzerland, 5102 Rupperswil
Seller: Surplex GmbH

Weight approx.: 7000 kg Dimensions (l x w x h) approx.: 6000 x 1400 x 2200 mm Description: International size designation 620/150, closing unit: closing force 2500 kN, tool opening force 78 kN, motion force of the movable FAP 42 open, 36 close kN, size of the tool clamping plate 720 x 670 mm, clear span between the columns 500 x 450 mm, tool opening path max. 600 mm, tool installation height 300 to 900 mm, hydraulic ejector, stroke 100 mm, power 23.5 kN, injection unit: work capacity 620 cmMp, screw diameter 45/50/55 mm, injection pressure 2022/1638/1354 bar, stroke volume max. 305/377/456 cm³, moulded part weight max. 274/339/410 g, see attached PDF document for further details

Category: 301: injection moulding machines
New in: 2003
Price: request quote
Location: Land-de DE 52070 Aachen, Jülicher Str. 336
Seller: EuropNet GmbH

Machine specification Year: 2003 Control unit: MC4 Injection Unit: .../1000 Screw diameter: 55 mm Injection pressure: 1904 bar Injection volume: 523 ccm Shot capacity: 476 g Clamping Unit: 200/... Clamping force: 200 t Platen size: 915 x 910 mm Distance between tie bars: 560 x 560 mm Mould height: 350 mm Opening storke: 700 mm Max.Daylight: 1050 mm Ejector stroke: 200 mm Drive power of the hydraulic pump: 37 kW Cylinder heating power: 18 kW General information: Delivery time: November Machine dimensions(m) LxWxH: 5,35x 1,90 x 2,25 m Weight: 10550 kg Equipment: - 1 x Pneumatic valve - 1 x Core pulls - Quality package - Increased oil coole ...

Category: 301: injection moulding machines
New in: 1984
Price: request quote
Location: Land-ch CH Switzerland, 5102 Rupperswil
Seller: Surplex GmbH

Weight approx.: 130420 kg Dimensions (l x w x h) approx.: 15600 x 3100 x 3010 mm Description: Tool closing force 18000 kN, tool opening force 1000 kN, tool opening path max. 1800 mm, clear distance between columns 1300 x 1300 mm, max. tool holder plate 1960 x 1960 mm, tool installation height 750 to 1350 mm, opening width max. 3150 mm, max. stroke of the hydraulic ejection 250 mm, ejection force 315 kN, heating: control area 6 output in kW for nozzles 0.67, in total 76.67, injection unit: work capacity 1015 kNm, screw diameter 115/130/155 mm, spray pressure max. 1840/1440/1010 bar, spray force 1911 kN, stroke volume max. 5500/7030/10000 cm³, moulded part weight max. in polystyrene 4960/6310 ...

Category: 301: injection moulding machines
New in: 2002
Price: request quote
Location: Land-de DE
Seller: GINDUMAC GmbH

Krauss Maffei 3200-17200 MC (2002) OVERVIEW Brand: Krauss Maffei Model: 3200-17200 MC Application Type: Injection Moulding Machine Type: Injection moulding machines Availability: Immediately Production Year: 2002 Location: Germany Origin Country: Germany Production Hours: GENERAL DATA Measurements width: 16220 mm Measurements depth: 4900 mm Measurements height: 3690 mm Machine weight: 230000 kg CONTROL UNIT Brand: Krauss Maffei INJECTION UNIT Screw diameter: 135 mm Shot weight: 8792 g / PS Stroke volume: 9662 cm3 Injection pressure: 1784 bar Plasticising rate max: 264 g/s PS Screw speed: 113 1/min Heating capacity: 112 kW Adjustable heating zones: 7 Nozzle  ...

Category: 301: injection moulding machines
New in: 1996
Price: request quote
Location: Land-ch CH Switzerland, 5102 Rupperswil
Seller: Surplex GmbH

Weight approx.: 12000 kg Dimensions (l x w x h) approx.: 8000 x 1800 x 2500 mm Description: International size designation 1200/250, closing unit: closing force 2500 kN, tool opening force 160 kN, size of the tool clamping plate 900 x 830 mm, clear span between the columns 630 x 560 mm, tool opening path max. 800 mm, tool installation height 350 to 1150 mm, hydraulic ejector, stroke 150 mm, power 60 kN, injection unit: work capacity 1200 cmMp, screw diameter 55/60/70 mm, injection pressure 2116/1778/1306 bar, stroke volume max. 570/678/923 cm³, moulded part weight 513/610/830 g, see attached PDF document for further details

Category: 301: injection moulding machines
New in: 2009
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

KM 160to EX, CA Mid 2019 the machine is available! The machine is built in 2009 Maintenance carried out annually. All wear parts replaced you will have about 40,000 hours of operation up for sale. This does not include the peripherals. Bdofnypnir

Category: 301: injection moulding machines
New in: 1987
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 301: injection moulding machines
New in: used
Price: request quote
Location: Land-es ES 39792 Heras/Cantabria, Pol. Industrial de Heras, Parc. 207
Seller: Udo Krichbaum TRANSITUS, S.L.

CONVERT YOUR HORIZONTAL INJECTION MOULDING MACHINE TO AN 2 COMPONENT MACHINE! we have for sale the follow, independent injection unit (vertical) from KRAUSS-MAFFEI for 2 component injection. Independent injection unit Krauss-Maffei "Bolt in" Screw diameter 55mm. This injection unit can be mounted on each injection moulding machine (vertical) for be injection moulding. With own control MCM and own hydraulic equipament,

Category: 301: injection moulding machines
New in: 1989
Price: request quote
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 301: injection moulding machines
New in: 1993
Price: request quote
Location: Land-pl PL 93320 Lodz, Sarmacka 8/25
Seller: PaGaPlast

Manufacturer/manufacturer: Krauss Maffei Typ/type: KM 110-390 C1 Year/year: 1993 Control/controller: MC 4 Clamping force/clamping force: 1500 kN Holmabstand/Dist.Betw.Tiebars: 500 mm x 500 mm Disk size/platen size: 750 x 750 mm WZ height/mould hight: min 250 max 500 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm Auger/screw size: 50 mm Stroke volume/shot volume: 442 CC / 394 gram PS Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 5600 kg Screen text: German Options/optional extras Core puller / core pulling: x 1  ...

Category: 301: injection moulding machines
New in: 2000
Price: request quote
Location: Complast - Pegnitz
Seller: Complast Gmbh

screw size:45 mm injection shot weight in Polysterol:250 g clamping force:800 kN : INJECTION UNIT: screw size:45 mm max. swept volumne:275 cm³ injection shot weight in Polysterol:250 g/PS injection pressure:1.878 bar CLAMPING UNIT: clamping force:80 t tie bar distance:405 x 405 mm mould hight min.:250 mm opening stroke:500 mm centering ejector plate:125 mm centering nozzleplate:125 mm CONTROL: microprocessor control:MC4 screen text:deutsch / german Manual:deutsch / german EQUIPMENT: robot interface:Euromap 12 core drawing:2 x OTHER DATAS: Total Heating Capacity:11,0 kW total connection power:29,5 kW total weight:3.500 kg dimension L x W x H:4,3 x 1.4 x 2,0 m Terms of payment: 100 % prior t ...

Category: 407: thermoforming machines
New in: 1995
Price: request quote
Location: Land-fr FR 92522 Romainville, 22 Rue du camp
Seller: SNVI ENERGY

Thermoformeusse pozzo Format : 700x500mm Année : 1995 Emboutissage: 280 mm équipée d'un massicot Elle est adaptée au prototypage, petites et moyennes series Utilisation de toutes les matières thermoformables Machine pour la production de pièces plastiques comme : -Emballage legers, blisters Emballages pharmaceutiques Emballages alimentaires Plateaux de manutention Callages techniques et robotiques Presentoirs pour PLV Capots de machines Skin pack ILLIG, KIEFEL, ARBURG, BATTENFELD, BILLION, DEMAG, DK, ENGEL, FISCHER, HUSKY, ADS, KRAUSS MAFFEI, MARGARIT, NEGRI BOSSI, NETSTAL, SANDRETTO, WINDSOR, AMUT, ANDOUARD, BASTON, SAMAFOR, TECNOVA, VOBAU, ILLIG, CB CONCEPT,  ...

Category: 302: extruders
New in: 1987
Price: request quote
Location: Deutschland
Seller: IMZ Maschinen Vertriebs GmbH

screw size: 90 x 30D mm Capacity: 350-400 kg/h Drive: 132 kW L/D: 0 screw speeds: 110 U/min extrusion height: 1000 mm dimensions of the machine ca.: 4,1x1,8x2,45 m weight: 4,5 t Operating hours: 45.300 h Cylinder zones: 4 Adapter zone: 1 Tool zones: 7 Melt temperature display Feed bush. grooved Accessories: mixing part, granule funnel

Category: 301: injection moulding machines
New in: 2005
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

KRAUSS MAFFEI KM 80-180 CX Year of construction: 2005 Injection unit: Screw diameter: 28 mm Shot weight: 67 g Injection pressure: 2325 bar Dispensing volume: 74 cc Clamping unit: Clamping force: 80 t Tie bar distance: 420 x 420 mm Size of the clamping plates: 670 x 670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V Additional equipment: EUROMAP Robot interface Core move x 1 Air valve x 4 Injection unit cured - bi Proportional valve on the injection unit - precise injection Dimensions: Weight: 3400 kg Length/width/height: 3.80 x 1.50 x 2.10 m Drive: Pump/motor: 15 kW Heating power: kW 8.12 Total: 23.12 kW Price: On request

Category: 301: injection moulding machines
New in: 1995
Price: request quote
Location: Complast
Seller: Complast Gmbh

screw size:35 mm injection shot weight in Polysterol:142 g clamping force:1100 kN : INJECTION UNIT: screw size:35 mm max. swept volumne:156 cm³ injection shot weight in Polysterol:142 g/PS injection pressure:2.159 bar : CLAMPING UNIT: clamping force:110 t tie bar distance:470 x 470 mm mould hight min.:300 mm opening stroke:600 mm center hole:125/175 mm : CONTROL: microprocessor control:MC 3F screen text:deutsch Manual:deutsch : EQUIPMENT: robot interface:Euromap 12 core pull:1 x : OTHER DATAS: pump drive power:18,5 kW total connection power:29,5 kW total weight:8.000 kg dimension L x W x H:4,5 x 1,6 x 2,2 m standard Terms of payment: 100 % prior to delivery

Category: 301: injection moulding machines
New in: 2008
Price: request quote
Location: Land-pl PL 91-212 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

KRAUSS MAFFEI KM 110-380 CX Year of construction: 2008 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 110 t Tie bar distance: 470 x 470 mm Size of the clamping plates: 745 x 770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch control panel Additional equipment: High machine Air valve x 1 Hot channel control Hardened Spritzaggragt - bimetal Battery - powered with nitrogen (bottle with nitrogen - to quick work) Parallel movements Dimensions: Weight: 7800 kg Length/width/height: 5.30 x 1.60 x 2.05 m Drive: Pump/motor: 18.5 kW Price: On request

Category: 301: injection moulding machines
New in: 1996
Price: request quote
Location: Vorlauf
Seller: Complast Gmbh

screw size:40 mm injection shot weight in Polysterol:185 g clamping force:1250 kN : INJECTION UNIT:--- screw size:40 mm max. swept volumne:204 cm³ injection shot weight in Polysterol:185 g/PS injection pressure:1.860 bar : CLAMPING UNIT:--- clamping force:125 t tie bar distance:470 x 470 mm mould hight min.:300 mm opening stroke:600 mm : CONTROL: microprocessor control:MC 3F screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:Ja core pull:2 x : OTHER DATAS: pump drive power:18,5 kW total connection power:31,5 kW total weight:5.800 kg dimension L x W x H:4,2 x 1,3 x 2,2 m Terms of payment: 50 % with order, 50 % prior to delivery

Category: 301: injection moulding machines
New in: 2002
Price: request quote
Location: Land-pl PL 91-21 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

KRAUSS MAFFEI KM 125-520 C2 Year of construction: 2002 Injection unit: Screw diameter: 45 mm Shot weight: 250 g Injection pressure: 1878 bar Metering capacity: 275 cc Clamping unit: Clamping force: 125 t Tie bar distance: 470 x 470 mm Size of the clamping plates: 745x770mm Ejector: hydraulic Clamping unit: hydraulic Control: MC IV Additional equipment: Air valve x 1 Parallel movements Proportional valve on the injection unit - precise injection Machine is equipped with battery (nitrogen bottle) - charging with nitrogen, which is used for the fast work Dimensions: Weight: 6000 kg Length/width/height: 4.48 x 1.51 x 2.19 m Drive: Pump/motor: 18.5 kW Heating p ...

Category: 301: injection moulding machines
New in: 2007
Price: request quote
Location: Werk
Seller: Gerd Seidler Werkzeugmaschinen

closing pressure: 16000 kN clamping plate: 2510 x 2080 mm cylinder head volume: 5881 cm³ Injection pressure: 1960 bar This ad was created with MODUL MWS - the software solution of LogoTech.

Category: 301: injection moulding machines
New in: 2003
Price: request quote
Location: Land-pl PL 91-21 Lodz, Wersalska 54
Seller: Szczep-pol s.c.

KRAUSS MAFFEI KM 200-1000 C2 Year of construction: 2003 Injection unit: Screw diameter: 55 mm Shot weight: 476 g Injection pressure: 1904 bar Metering capacity: 523 cc Clamping unit: Clamping force: 200 t Tie bar distance: 560 x 560 mm Size of the clamping plates: 915 x 915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC IV Additional equipment: EUROMAP Robot interface Hydraulic core pulling x 1 Air valve x 3 Injection unit cured - bi Dimensions: : Weight 10530 Length/width/height: 5.32 x 1.90 x 2.24 m Drive: Pump/motor: 37 kW Heating power: 19 kW Total capacity: 56 kW Price: On request

Category: 301: injection moulding machines
New in: 1998
Price: request quote
Location: Werk
Seller: Gerd Seidler Werkzeugmaschinen

closing pressure: 30000 kN clamping plate: 2800 x 2500 mm cylinder head volume: 7240 cm³ Injection pressure: 1790 bar This ad was created with MODUL MWS - the software solution of LogoTech.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)