krauss maffei km used for sale

Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,800 x 4,600 x 3,100 mm, weight approx.: 11,700 kg

Description: Travel paths , X 900 mm, Y 1800 mm, Z ,2500 mm, C 0 to 90° pneumatic Including enclosure 1400 x 2400 x 2100 mm Conveyor belt 590 x 2540 mm, height-adjustable Approx. Onsite Dimension. (l x w x h): 4,500 x 1,500 x 3,000 mm, weight approx.: 550 kg

Description: closing force: ,1200 kN auger diameter: ,35 mm ejection stroke: ,160 mm batch volume: ,61,09 cm3 injection speed: ,288,6 cm3/s injection pressure: ,2429 bar Approx. Onsite Dimension. (l x w x h): 6,000 x 1,700 x 2,000 mm, weight approx.: 9,700 kg

Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance

used spare part IMM - Column warehouse no.: 501285 manufacturer: KRAUSS MAFFEI Typ: Saeule year of construction: neu Column for intensifier match the machine size Krauss Maffei 501285 There are a total of 6 columns available, they are brand new and unused. Total length 965 mm, diameter 124 mm piston, piston rod diameter 85 mm.

Krauss Maffei KMD120 extruder - efficient - year of manufacture 2002 - Screw diameter: 120 mm parallel - L/D: 23 - capacity: 600 - 700 kg/h - the scope of general renovation in 2011 carried out in our company - new AC 90 kW motor, controlled by a new vector inverter - new control cabinet equipped with new heaters, new housings, new fans, - new thermoregulation cabinet equipped with SSR + new regulators - new plasticizing system, - number of heating zones: cylinder (5), connector (1), head (3) - reducer after reconditioning - drive synchronization system: extruder, dispenser - equipped with a pressure and temperature sensor. -Dimensions; length x width x height = 530160170cm + hopper - Extrusion axis 1200mm

Krauss Maffei KM90/50-190 CD injection molding machine The machine was working in a CD production line

Injection moulding machine Krauss Maffei KM200-1400C1 Clamping force 200 Ton Distance between columns : 550 cm x 550 cm

Injection moulding machine Krauss Maffei KM200-750CX Machine is in good condition Clamping force 200 Ton

Krauss Maffei KMD 130-23 extruder Capacity : 1 Ton per hour Suitable for granule

Krauss Maffei KMD 2-110 PVC Extruder Machine Hourly capacity : 450-600 KG PLC Control

Krauss Maffei bi-material KM1600/12000/8100 MX -Clamping force : 1300 ton -Manufactured year : 2007~2009 -Quantity : 12 units

Krauss Maffei KM800-8100 MX Injection Moulding Machine With Robot 3300 gr(PS) Min-Max mould thickness : 500-1100 mm Distance between column : 1120 mm x 1000 mm Screw diameter : 95 mm

KRAUSS MAFFEI KM450-4500 CS PET (450 ton) year `2010 for PET preform Location : Korea

KRAUSS MAFFEI KM3200/24500 (3200 ton) injection molding machines for bumper. For more information, contact by email (koma7240daum.net) or whatsapp (+821037187243)

Used hard PVC granulation plant after reconditioning Capacity approx. 200 - 300 kg/h, consisting of: 1.Extruder Krauss Maffei KMD 2-60KK (twin-screw, oblique screws), Year Built 1996 Main engine 37kw Heaters controlled by thermoregulators Heaters of German production Degassing – pump Screw diameter: 60-125 mm Screw speed 37.5 rpm Oil-thermostated augers externally Heating power of snails 6kw Screw cooling power 7kw Oil-cooled cylinder 4 zones on the cylinder (including 3 heating and cooling zones) Gefran/ Gneuse mass pressure sensor – Gefran/Gneuse ground temperature sensor Cylinder cooling power 14kw Capacity up to 300 kg/h 2. rotary filter (sieve changer) Manufacturer: Gneuss Type SF-90 – capacity up to 350 kg/h 3.Cutting in hot air system 4. granulate cooler with conveyor fan

1,0 St. gebr. Injection molding machine with turntable, lateral unit from medical technology Manufacturer: KRAUSS MAFFEI Type: KM100/180CX Year of construction: 2007 Clamping force: 100 tons Tie bar spacing: 370 x 370 mm Screw DN 1: 25 mm Displacement: 59 cm³ Moulded part weight: 54 g/hp Screw DN 2: 15 mm Displacement: 14 cm³ Moulded part weight: 13 g/hp Control: MC5 Equipment of the machine: -Interface robot -Additional control pump -2.0 ST. Core pulls

KRAUSS MAFFEI two shot (2k) KM1300-12000/8000 MX machines -Clamping force : 1300 ton

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total production time h 54540/61077/51379 Origin Germany Closing Unit Closing Force 2000 Kn (200T) Inner width between columns (hxv) 560x560 mm Mold opening way 700 mm Min. Mold height 350 mm Pusher distance 200 mm Pusher forward force 58 Kn Injection Unit SP1000 Screw diameter 55 mm L / D ratio 20 Volume 523 Cm3 Weight (PS) 476 g Pump power 37 kw Heater power 18 kw Weight ca. 10 t Length x Width x Height 5320x1750x2230 mm price for one machine

Key data: 6500 kN, 1650 g/PS, 90 mm

1.0 pcs. Injection molding machine with robot Manufacturer: KRAUSS MAFFEI Type: KM650-2700C2 Year of construction: 2003 Clamping force: 650 tons Tie bar spacing (HxV) 1,000 x 930 mm Screw DN: 90 mm Displacement: 1,813 cm³ Moulded part weight: 1,650 g/hp Control: MC4 Equipment of the machine: - 2 pieces of core pulls movable plate - 2 pieces of core pulls fixed plate -Closing nozzle hydraulic -Robot: Manufacturer WITTMANN, type: W643, year of manufacture: 2003 Travels: Y = 2,400 mm, X = 1,200 mm, Z = 3,000 mm

Krauss Maffei KM650-5700CM Closing unit Clamping force [kN] 6500 Dimensions of mounting plates (hxv) [mm] 1550 X 1440 Clearance between columns (hxv) [mm] 1000 X 930 Min./max. mold height [mm] min 600 Maximum opening width [mm] 1750 Injection unit Screw diameter [mm] 95 Injection volume [cm3] 2956 Injection weight [g] 2111 Injection pressure [bar] 1795 Electrical and hydraulic equipment Rated power of the pump motor [kW] 110 Heater power [kW] 59 Dimensions and weight Net weight with control cabinet [t] 39.5 Dimensions (L x W x H) [m] 9.36 x 2.65 x 2.43

110 Ton Distance between columns : 470 mm x 470 mm 250 gram

110 Ton Distance between columns : 470 mm x 470 mm 250 gram

Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control.

Here we offer a well-maintained injection moulding machine. Manufacturer / Type:BOY Type: XS (100-14) Serial No.:will be communicated in case of interest Year of manufacture:2015 Operating hours:25.000 h Version:Procan Alpha 2 / S1 Clamping unit Clamping force:100kN tie bar distance:160 x 110mm (2 tie bars) Mould installation height min.:100mm Platen distance max:250mm Ejector stroke:50mm Injection unit: Injection unit:cylinder ø14mm Shot weight max.:6,1 g/PS Injection flow:22g/sec Spec. injection pressure:2298 bar Sprue extractor integrated Dimensions & weights: Weight with control cabinet: 485 kg. Length: 1480mm Width (machine only):520mm Height min - max:1380 - 1690mm Oil capacity:28 L The visible mini-laminar flow unit and the stainless steel area cover belong to the machine Other possibly visible peripheral devices do not belong to t ...

For sale a complete extrusion line in good condition, produced in 2004 by A + G Austria. Extruder KMD110 (Krauss Muffai) 1996 The line is designed for the production of a PVC window sill, 500mm wide, as well as a seamless panel with a width of 250mm. The appropriate extrusion tool is available. Line productivity 350kg / hour. The line allows you to process highly filled mixtures at a low cost. The set includes a screw loader. The cylinder augers after replacement have worked for 6 months

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] 300/600 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 229 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 22 Heater power [kW] 15.5 Dimensions and weight Net weight with control cabinet [t] 7.7 Dimensions (L x W x H) [m] 5 X 1.6 X 2

- Krauss Maffei MC3 EK 200 EUR 450 - Krauss Maffei MC3 KR 103 EUR 450 - Krauss Maffei MC3 LV 200 + LVR 10 EUR 600 - Krauss Maffei MC3 PR 201 EUR 450 - Krauss Maffei MC3 PR 202 EUR 450 - Krauss Maffei MC3 PV 200 EUR 450 - Krauss Maffei MC3 EPR10 EUR 250 - Krauss Maffei MC3 EPR11 EUR 200 - Krauss Maffei MC3 VU100 EUR 200 - Krauss Maffei MC3 KMV2 EUR 250 - Krauss Maffei MC3 CPU100 EUR 250 - Krauss Maffei MC3 BT100 EUR 250 - Krauss Maffei MC3 IA100 EUR 200 - Krauss Maffei MC3 IE200 EUR 200 - Krauss Maffei MC3 GDC EUR 300 - Krauss Maffei MC3 EPR20 EUR 250 - Krauss Maffei MC3 FD100 EUR 350

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Krauss Maffei, MC3 control of plug-in cards, printed circuit boards from injection molding machine -Power Supply / Converter: Elba euro module PCD 315 CP -Insert card: Krauss Maffei KR100 -Plug-in card: Krauss Maffei PV104 -Insert card: Krauss Maffei LV100 2 pcs. -Installation card: Krauss Maffei EK200 -Insert card: Krauss Maffei EK100 -Plug-in card: Krauss Maffei SP400 -Installation card: Krauss Maffei PR200 -Individual components: see photos -Price / sale: complete -Dimensions: 485/270/320 mm -Weight: 12.9 kg

warehouse no.: 501284 manufacturer: KRAUSS MAFFEI Typ: Saeule Nr. 6400007 year of construction: new Column for pressure intensifier match to the machine size Krauss Maffei KM 110 and KM 125. Total there are 6 columns available, they are brand new and unused. Overall length 1138 mm, piston diameter 140 mm, rod diameter 95 mm. Krauss Maffei Order No. 6400007 detailed description: Column for closing side of size KM 110 and KM 125 are to check the dimensions drawings with exact measurements available.

RECONDITIONED KRAUSS MAFFEI KM 125 ATEX CENTRIFUGE REF.: C3553 Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate with 4 dampers discs type ZPVL 25-45.6 Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. General characteristics: Manufactured by KRAUSS MAFFEI Model KM 125 Type Vertical basket bottom discharge centrifuge with scraper Material Stainless steel 316L Weight 6400 kg Technical characteristics: Download Por el fondo con rascador Basket diameter 1.250 mm Height basket 650 mm Max. load 650 kg Useful load 500 dm3 Max. rotational speed 900 rpm Engine 37 kW - 50 cv

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Krauss Maffei, MC3 control plug-in cards circuit boards from injection molding machine -Temperature controller card: Gossen Pantatherm DS 4 3 pieces -DC-DC converter: Elba euro module PCD 54 CP on plug-in board: Krauss Maffei AN 100 -Prop.amplifier: Bosch 0 811 405 015 / 0 811 405 002 / 0 811 405 099 - Plug-in card: Krauss Maffei SK201 -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 4.8kg

KRAUSS MAFFEI KM 110-520 C1 injection moulding machine was built in Germany in 2003. The machine used in production plants produces top-quality plastic products using the injection moulding method, which involves feeding a plastic material of sufficient plasticity into an injection mould, which is then clamped with a high force of 110 tonnes. To ensure the highest possible operating efficiency and productivity, the machine uses reliable components, such as a powerful screw with a diameter of 45 mm and an ejector with a force of 22 kN. The KRAUSS MAFFEI KM 110/520 C1 injection moulding machine weights 6000 kg. Technical data of the KRAUSS MAFFEI KM 110-520 C1 injection moulding machine - mould clamping force: 110 t (1100 kN) - mould opening force: 7 t (70 kN) - injection volume: 275 cm3 - injection capacity: 159 cm3/s - injection pressure: 1878 bar - injection weight: 250 g - p ...

Product: injection molding machine Rubric: injection moulding machines Make/model: Krauss Maffei KM 320-1900 C3 Year of construction: 1999 Krauss Maffei injection moulding machine Type: KM 320-1900 C3 control: MC4 year: 1999 Clamping unit Clamping force t 320 Gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 Injection unit Screw diameter mm: Gr 70 injection weight: 954 Injection volume cm m³: 1048 Spray pressure bar: 1778 Dimensions and weights Dimensions Lxwxh m: 6.75 X 2.15 X 2.4 machine weight kg: 16,300 Miscellaneous C3 SYSTEM EUROMAP 12 interface

Make/model: Krauss Maffei KM 450-3500 C3 Year of construction: 2004 Krauss Maffei injection moulding machine Type: KM 450-3500 C3, ACCU control: MC4 year: 2004 Clamping unit Clamping force t 450 Gap mm: 1170 Holm dimension mm: 900 x 800 min/max height mm: 480 Plate size: 1270 x 1230 Injection unit Screw diameter mm: 80 Injection weight gr: 1544 Injection volume cm m³: 1754 Spray pressure bar: 2205 Dimensions and weights Dimensions Lxwxh m: 7.98 x 2.35 x 2.55 machine weight kg: 26,000 Miscellaneous C3 system EUROMAP 12 interface

This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

USED KRAUSS MAFFEI HZ 630 PH CENTRIFUGE REF.: C6486 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 630 Ph Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm

USED KRAUSS MAFFEI HZ125 CENTRIFUGE REF.: C6484 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 125 Technical characteristics: Basket diameter 1250 mm Max. rotational speed 1220 rpm

USED KRAUSS MAFFEI HZ 63 SI CENTRIFUGE REF#: C6483 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 63 Yes Caractéristiques techniques : Densité admissible du produit : 1250 kg/m3. Température du produit : 50 ºC Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm

Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Type: SPA 12/25 RP Type: Hydraulic power pack Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

Krauss Maffei KM 2000-17200 MX Injection Molding Machine Krauss Maffei robot - LR 500 Year of production - 2007 Hydraulic-mechanical double-plate locking system with 4 pressure cushions and 4 locking units on the movable plate. PV - adjustment of the injection unit. MC 5 - PC - (Pentium) control system with TFT colour monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with HPS-AT screw diameter 150 mm TECHNICAL DATA Clamping unit - mould clamping force: kN 20000 - mould opening force: kN 1400 - Dimensions of the mounting plate (H x V): mm 2650 x 2400 - Clearance between columns (H x V): mm 1870 x 1620 - mould opening stroke: mm 2800 - mould height (min-max.): mm 800 – 1700 - Opening width: mm 3600 - ejector stroke: mm 400 - ejector force: kN 400/200 Injection Unit - screw diameter: mm 150 Cetb ...

This used Krauss-Maffei KM 300-1400-390-3-CZ, manufactured in 2003, comes fully equipped with new operation-specific software, updated hydraulic plans, and precision injection units for enhanced performance. Key features include a comprehensive electrical installation, a detailed locking unit, a robust machine bed design, and a state-of-the-art cooling system. Additionally, it includes a hydraulic ejector system and transport lock for safety and reliability. Operating instructions are available in Spanish and German. Seize the opportunity to buy this Krauss-Maffei KM 300-1400-390-3-CZ injection moulding machine for top-notch manufacturing efficiency. Contact us for more information.

Key data: 1600 kN

Krauss Maffei KM 160-750 CX with the Sepro Industrial Robot SDR 22S robot / hybrid machine / operating hours: approx. 34,000 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 45 mm Spray weight: 289 g Injection pressure: 2336 bar Dosing volume: 318 ccm Clamping unit : Clamping force: 160 t Tie bar spacing: 520x520 mm Size of clamping plates: 820x845 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touchscreen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 34,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving Machine with cylinder / battery with compressed nit ...

Key data: 1100 kN

Krauss Maffei KM 110-700 C2 Year of construction: 1998 Injection unit: Screw diameter: 45 mm Spray weight: 278 g Injection pressure: 2336 bar Dosing volume: 305 cc Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Parallel Movements Proportional valve on the injection unit – precise injection Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) The machine was regularly serviced by the authorized service Krauss Maffei in Switzerland Metrics: Weight: 6200 kg Length/Width/Height: 4.66x1.51x2.19 m Drive: Pumps/motor: 18.5 ...

Key data: 350 kN

Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : Clamping force: 35 t Tie bar spacing: 320x320 mm Size of clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air valve x 2 Hot runner control x 6 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized service Krauss Maffei in Germany It is possible to change the screw diameter for fi 20 mm, 22 mm Metrics: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating capacity: 3.78 kW Total power: 14.78 kW All offered machines are st ...

General SKU358U925 LocationBarneveld MakeKrauss Maffei TypeHZ 1000 Ph No.60000215 Year of construction2000 Main Features MaterialStainless steel Motor36 KW Inlet diameter200 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity170,4 Ltr. (max. 171,8 Ltr.) Basket sizesDia. 1000x500 mm Wall thickness20 mm Max. loading weight213 kg Max. basket speed1500 rpm Motor36 kW, 400 volt (Ex) With scrapercheck Hydraulic operatedcheck Motor1,5 kW Solids outletDN200 MaterialStainless steel 1.4404 (316L) Information Total height2,0 m Weight9100 kg CEcheck Floorspace3,2x1,8 mPeeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine  ...

General SKU245U288 LocationBarneveld MakeKrauss Maffei TypeSZ 51-8 No.11468 Year of construction1995 Main Features MaterialStainless steel Motor18.5 KW Inlet diameter70 mm Specified Features - Pusher centrifuge Pusher centrifugecheck Basket diameterdia. 604 mm Basket width675 mm Wall thickness20 mm Max. loading weight53,6 kg Motor18,5 kW, 1470 rpm Max. basket speed665 rpm Hydraulic operated pushercheck With hydraulic unitcheck Motor11 kW Inletdia. 70 mm Solids outlet300x80 mm Liquid outlet430x110 mm MaterialStainless steel 1.4539 (904L) Information Mounted on framecheck Total height1,3 m Weight2450 kg CEcheck Floorspace2,58x1,20 m Extra SpecificationsTemerature range 10-110°, adm. density 1060 kg/m3 :  :Pusher centrifugesKrauss MaffeiCentrifuges > Pusher centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition ...