jig boring machine used for sale

Working spindle diameter: 160 mm Spindle taper: clamping 100 metric Spindle speed: 800 rpm Clamping surface of the table: 4000x9000 mm Working transverse feed - x-axis: 9000 mm/min Working longitudinal feed - axis z: and W 1500 mm/min Working vertical feed - y-axis: 3050 mm/min Turntable area:: 2000x2000 mm Rotary table y/zw axis: : 2800x1000 mm Rotary table max workpiece weight:: 20,000 kg

WH 105 CNC with Heidenhain iTNC 530 control system is in good technical condition. By agreement, it is possible to see it in operation. AME brand belt filter system with PS50 belt filter attachment, belt skimmer with conveyor belt, micro aerator type 300, lifting system, pump for feeding the machine, external cooling 3 bar, 40 l/min and internal cooling 20 bar with container for coolant 1000 l. Standard chip conveyor for x 1800mm with stepped grate from AME. Spindle speed: max 3300 rpm Transverse movement of the table - x-axis: 1800 mm Longitudinal movement of the table - z axis: 1250 mm Vertical table movement - y axis: 1600 mm Turntable: : 1400x1600 mm B: 360°

Year of Manufacture/SO/GO: 1987/-/2001 Description: The machine is in very good technical condition, dismantled, stored in storage. 5 persons X (table lift) 5000 mm Y (vertical lift of headstock) 2000 mm Z (longitudinal displacement of the column) 1250 mm W (spindle travel) 800 mm Engine power: 37 kW Spindle speed range: 1.25-900 rpm Rapid feed: 4000 mm/min Spindle diameter: 130 mm Table: 1800 x 1800 mm Machine weight: 12000 kg Spindle taper: ISO 50. control system HEIDENHAIN

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

Category bench boring mill Make Stankoimport Type 2 A 635 Year of construction 1974 Spindle diameter 125 mm x-travel 1600 mm y-way 1400 mm z-travel 1600 mm Table size 1800 x 1600 mm Spindle mount MK 6 Drilling depth in one go 1000 mm Quill stroke 1000 mm Speed range - spindle 8 - 1250 rpm Speed range - facing slide 5 - 315 rpm Feeds - longitudinal / transverse / vertical 1 - 800 mm / min Table can be rotated 360 ° Table load 4000 kg Division 0.5 ° Distance table - spindle center 50 - 1350 mm Face slide feeds: 1 - 800 mm / min Cross slide diameter 800 mm Spindle drive 17 kW Machine weight approx. 32.5 t Space requirement approx. 7.50 x 3.50 x 3.93 m Accessories facing slide, stick, 2 support sleeves

Dowel drilling machine long hole drilling machine. HOFFMANN Dowel Fix Type: DBL C110 Built in 1995 Dowel drilling on 2 different levels Pneumatic height adjustment of the drilling unit incl. quick-change device for drill chucks. incl. drill chuck up to 20 mm incl. 8-fold gear drill chuck incl. several drill bits. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Multi-spindle drilling machine from Bernhard Steinel - Machine Tool Factory Schwenningen/Neckar ran reliably until the end The machine is equipped with a foot pressure switch from Festo a drive motor from Bauknecht and a control box from Siemens Pneumatic lines should be checked/repaired before The machine can be viewed at any time. Transport via freight forwarder can be arranged at short notice -feel free to take a look at the other advertisements or visit us directly at Gerstenstraße 2, 17034 NB The price is net plus 19% VAT If you have any further questions, please call or write. Maschinenhandel Nord new & used machines for industry, trade and commerce

Used Hole Row Drilling Machine Int. Art. Ref. k0919 Manufacturer: Ganner Type 204 Red Baron Year of construction 2001 Power 0.75 kW Right and left hinge Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and leg ...

The machine is in good technical condition. Spindle bore: 80 mm Taper: Morse 5 Equipment: Own crane Digital measurement 1000 x 500 console It was used once a year for light drilling or milling. By prior arrangement, the possibility of a tour in progress.

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas diameter dowels: 6 mm, length of 40 mm. Controlls: Powercontrol PC85 with Woodwop software

VITAP drilling machine model SUPERFAST 27: – 27-spindle head with quick coupling – aluminium guides with electronic digital indicator – drilling at 0° - 45° - 90°, from lower vertical to horizontal – pneumatic movement of the drilling head – 6-position drilling depth revolver – 4 pneumatic clamps to hold the pieces Year 2018, CE standard machine

Description: Table: 15-ton load/0.001 degree indexing/Full C axis 18.5/22kw spindle motor 60 tool ATC Scales Spindle thru coolant Chip conveyor Fanuc 31iA control Includes shipping to any major seaport in the world. x-motion: 3,000 mm, y-motion: 2,000 mm, z-motion: 1,600 mm, w - axis: 700 mm, table surface area l x w : 2,000 x 1,800 mm, turning speed range: 2,500 rpm, weight approx.: 37,200 kg, Approx. Onsite Dimension. (l x w x h): 6,320 × 6,900 x 5,049 mm

Machine in good technical condition, possibility of testing after agreement. Weight: 12000 kg Control: TNC 360. X axis (longitudinal) 1250 mm Y-axis (pricna) 1000 mm Z axis (vertical) 900 mm Table length 1000 mm Table width 1120 mm Workpiece weight 3000 kg Spindle diameter 90 mm Max. shaft speed 1120 rpm Shaft motor power 20 kW

Horizontal boring milling machine AYCE model AC100-K4 with continuous variation of advances and cnc Heidenhain TNC124 - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed ​​range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/ma ...

Description: SPECIFICATIONS Character: Sacem Type: MSPC 110 Year of construction: 1976 X: 2,500 mm Y: 2,000 mm Z: 500 mm B: 1,250 mm Top name spindle: ISO 50 Spindle: ø110 mm Digital readout: SONY Panel length: 2x 3,000 mm Panel width: 2x 1,500 mm Flat turning support: 400 mm slag (including various tools) Lunettes included 2x Spindle support 1x Angled freewheel (Huron type ISO 50) Mantle freewheel: 320 + ø400 mm Angle plate: (2x) 500 x 1,330 mm / (2x) 650 x 1,700 mm / (2x) 800 x 2,800 mm Approx. Onsite Dimension. (l x w x h): 8,000 x 3,700 x 5,000 mm, weight approx.: 25,000 kg

Description: SPECIFICATIONS Character: Femco Type: WBT-100SR2 CNC Brand: Mitsubishi CNC Type: Meldas CNC Model: C3 Year built: 1995, overhauled in 2005 W: 700 mm X: 2,000 mm Y: 1,700 mm Z: 1,700 mm Table length: 1,440 mm Panel width: 1,600 mm Table load: 6,300 kg Angled milling head Spindle diameter: 100 mm ø Incl. right-angle milling head type Huron Approx. Onsite Dimension. (l x w x h): 5,680 x 3,400 x 3,700 mm, weight approx.: 20,000 kg

Key data: 500 mm, 350 mm, 375 mm

Control: MAHO 132 Direct displacement measuring system Vertical and Horizontal Spindle Table dimensions: 254x354 mm X-axis travel : 500 mm Y-axis travel : 350 mm Z-axis travel: 375 mm Tool holder: ISO40 Hydromechanical tool clamping. Quill stroke vertical spindle: 50 mm Spindle speed: 63-4,000 rpm Coolant basin and pump Chip pan Manual central lubrication Power supply : 380/50 V/Hz Total connection: 8 kVA Weight approx.: 1650 kg Machine dimensions LxWxH: 2,050x1,430x1,812 mm

Description: 21 + 18 spindles Height adjustment 70mm Max. drill bit length 70mm Max. drilling depth 75mm Spindle distance: 32 mm Max. drilling distance: 1216 mm WITHOUT MONITOR , Approx. Onsite Dimension. (l x w x h): 1,080 x 1,825 x 1,850 mm, weight approx.: 700 kg

This PADE NS21 (2002) Drilling and Sawing Combination Machine was manufactured in 2003 in Italy. It has around 3,000 operating hours and can work with a machinable workpiece size of 2500 mm. It features the combination of a pair of end milling , circular saw with adjustable angle on both sides and group drill heads (to be considered that one head needs repair). As for the 2 axes, the vertical axis has a rotation capacity of 90 degrees and the horizontal axis has a tilt capacity of -10 to +45 degrees. The machine with documentation and CE certificate.

SPECIFICATIONS: Working area mm: 1000 x 550 3 spindle units 3x3 Wheelbase between spindles mm: 32 Complete with 02 pressing stations Manual operation

SCM Startech 27 Row drilling machine with 27 drilling spindles Distance between two drilling spindles 32mm Spindle speed 2800 rpm Motor power drilling spindle 1.8kW Revolver Stop Positions 5 Max. drilling depth 70 mm Plate thickness min. 10 mm Panel thickness max. 85 mm Compressed air requirement 6 bar

Scharmann FB 100 boring machine Slides and table in excellent condition, no dents. Stroke: X 1300 mm Y 1200 mm Z 2000 mm Equipped with digital display on 3 axes. Work feed on table rotation. Machine weight: 25 tons With 6 tool pallets, clamping cube 1000 mm x 900 mm x 900 mm, and angular head.

Key data: 560 mm, 500 mm, 400 mm

used milling machine Mikron WF31D Control Heidenhain TNC407 Built in 1998 Switch-on hours 8000 h Spindle speed 4000 rpm Feed rate 2-3000 mm/min Adapter SK40 Removable vertical head Prices plus currently valid VAT (domestic) The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved.

Description: Boring and Insertion Machine Approx. Onsite Dimension. (l x w x h): 800 x 600 x 630 mm, weight approx.: 20 kg

Würth Hand drill G&-5077-M36LJ

Description: Serial  , ,Number: 95088 Main engine power: 37kw Spindle speed: 4 to 2000 rpm Nominal spindle speed: 177 rpm Cone : KOMET ABS 125 Outer diameter: 280 MM Strokes: 1600x3500x1500 mm Feeds: 3 to 5000 mm/min Rapid feeds: 10.000 mm/min X: 62/3000Nm Y:58/2000Nm Z: 62/3000Nm Installed power: 125 kva  , weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 14,000 x 5,000 x 4,000 mm

This 3-Axis Union TC 110 milling machine, crafted in 2002, is adeptly controlled by a Heidenhain TNC 426 system. It comes with a SIDEPALSA 40-fold tool changer and an SK50 tool holder. The table dimensions are 1250 x 1600mm, and it features movement in X, Y, Z, and W axes measuring 2000mm, 1600mm, 1500mm, and 550mm, respectively. Its spindle supports a diameter of 110mm, enhancing the precision with a nominal torque of 1639 Nm and speeds ranging up to 4000 min^-1. For more information about this Union TC 110 milling machine, reach out to us.

Description: main engine power: 3 HP serial number: 6S25 consisting of 5 lower drilling units with 11 + 11 spindles each. Wheelbase 32 mm drilling blocks swivelling from 0 to 90 degrees motor power 3 HP at 2800 rpm each maximum width horizontal drilling 3200 mm minimum width 260 mm 6 vertical pneumatic clamps automatic conveyor group with stop and pneumatic reference squaring device maximum speed 43 m + / min installed power 16,5 kW, 400 V, 50 Hz, 35 amp, 3 phases serial no. 6S25 dimensions in mm: approx. 5000 x 4400 x 2000 , weight in kg: approx. 5000 serial number: 6S25, working width min.: 260 mm, working width max.: 3,200 mm, total power approx: 16.5 kW, Approx. Onsite Dimension. (l x w x h): 5,000 x 4,400 x 2,000 mm, weight approx.: 5,000 kg

spindle diameter:110 mm x-travel:1800 mm y-travel:1400 mm z-travel:1400 mm W-axis (spindle longitudinal):600 mm max. table load:5 kg table-size:1250x1400 mm spindle drive:22 kW spindle taper:50 ISO spindle speed:10~3000 1/min Spindle motor torque:1000 Nm rapid speed:(X/Y/Z/W):5/5/5/3 m/min feeds:(X/Y/Z/W): 3/3/3/2 m/min positioning accuracy:0.025/1,000 mm (X/Y/Z), 0.03/600 mm (W) repeating accuracy:0.015 mm (X/Y/Z), 0.025 mm (W) mm total power requirement:50 kva weight of the machine ca.:18,5 t spindle bearing:SKF Scales:FAGOR allen Achsen CNC controller:Siemens/Fanuc/Heidenhain tabel encoder:Siemens Servo motors:in allen Achsen vom Steuerungshersteller

spindle diameter:130 mm x-travel:2000 mm y-travel:2000 mm z-axis:2500 mm w-axis:1020 mm spindle nose:50 ISO turning speed range:2-1000 U/min table surface area:2000x1800 mm max. table load:15 t weight of the machine ca.:40 t spindle drive:30 kW 4 jaw chuck:650 mm Unused table boring machine, make SMTCL, type TPX 6111B MAIN FEATURES: Powerful, flexible and productive With an optimal price / performance ratio Short and sweet üCompact, rigid cast-iron construction ü Sturdy four-pointed guides, which are hardened and precision ground, guarantee accurate working for many years üMechanical functions, which can not be operated simultaneously, are locked against each other üX, Y-axis has a DRO display with memory function üSpindle with tool holder ISO50 and automatic clamping system üSpindelstock and feed gear are equipped with an overload clutch üthe machine is equipped with a thread cut ...

:HBM-110L spindle diameter:110 mm x-travel:900 mm y-travel:900 mm z-travel:1400 mm W-axis (spindle longitudinal):600 mm U-axis:Planschieber: 180 mm B-axis (table):360x1 ° table load:5 t table-size:1100x960 mm T-slots:22 Stk. spindle speed:22 Stufen, 8-1000 1/min spindle taper:50 ISO rapid speed:(X / Y / Z / W) 2500 mm/min speed - faceplate:4-200 (18 Stufen) 1/min torqe of face plate:1960 Nm dia of faceplate:600 mm movement of facing slide:180 mm weight of the machine ca.:11500 kg main drive:7,5 kW Machine size (LxWxH):4910x 2454x2750 mm 2-Axis DRO :für X- und Z-Achse (von NEWALL)

:HBM-130XL spindle diameter:130 mm x-travel:2000 mm y-travel:1800 mm z-travel:(ohne Gegenhalter) 2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3136 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:10 t table-size:1800 x 1600 mm T-slots:11 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:29300 kg main drive:15 kW Machine size (LxWxH):7030x4665x3800 mm 2-Axis DRO :von NEWALL f. X- und Y-Achse Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure rate reduced ? High rigidity spindle could insure the strong machining ? Worktable 4x90° position  ...

x-travel:510 mm y-travel:400 mm z-travel:350 mm table-size:600x400 mm spindle speeds:12000 (Motorspindel) 1/min. spindle drive:5,8 kw spindle taper:30 BBT oder SK rapid traverse in x-y-z axis:60 m/min Tool changer:16 fach weight of the machine ca.:2,8 t CNC controller:SIEMENS 828D (10.4" LCD+SHOPMILL) high speed directl spindle motor:12000 1/min inner coolant:20 bar chip conveyor - auger:im Bett Brandnew machine with: 1. CONTROL SYSTEM SIEMENS 828D (10.4" LCD+SHOPMILL) 2. WORKING TABLE SIZE: 600 X 400 MM 3. MAX. TABLE LOAD CAPACITY: 250 KGS 4. SPINDLE SPEED 12.000RPM (DIRECT DRIVEN TYP) 5. SPINDLE MOTOR 5.8 KW (1PH8087) 6. SPINDLE NOSE BBT 30 7. X/Y/Z STROKE 510/400/300 MM 8. X/Y/Z STROKE RAPID TRAVERSE: 60/60/60 M/MIN 9. ATC CAPACITY 16 TOOLS (DISC TYPE) 10. STANDARD SPLASH GUARD 11. ELECTRICAL CABINET WITH HEAT EXCHANGER 12. COOLANT UNIT 13. MANUAL PULSE GENERATOR 14. RIDGID TAPPING  ...

spindle diameter:110 mm x-travel:1600 mm y-travel:1000 mm z-travel:1250 mm w-axis:Ausfahren der Spindel: 400 mm B-axis (table):360 x 1° mm Distance table/spindle center:0-1000 mm table load:2,5 t table-size:1000x800 mm T-slot (width-distance-quantity):22H8 x 7 x 100 mm tool taper:50 ISO spindle turning speed - stepless:2 Stufen: 20-1000 1/min feeds:X/Y/Z-Achse: 3-950 mm/min feeds:W-Achse: 3-400 mm/min rapid speed:X/Y/Z-Achse: 2,8 m/min rapid speed:W-Achse: 2 m/min main drive:15 kw (drehzahlgeregelt) feed motors:X/Y/Z-Achse-Servomotoren: 2,9 kW Feed motor:W-Achse-Servomotor: 1,3 kW range L-W-H:3.874 x 4.317x3.715 mm weight of the machine ca.:12 t total power requirement:20 KVA Automatic tool clamping:pneumatisch ball screw in axes:X/Z/W CNC controls from:Siemens/Fanuc/Fagor

:HBM-110 | HBM-110L | HBM-110XL spindle diameter:110 mm x-travel:900|1250|1600 mm y-travel:900|900|1200 mm z-travel:1400|1400|1400 mm W-axis (spindle longitudinal):600 mm B-axis (table):360x1 ° table load:5 t table-size:1100 x 960|1250 x 1100|1250 x 1100 mm T-slots:22 mm spindle speed:22 Stufen, 8-1000 1/min spindle taper:50 ISO rapid speed:(X / Y / Z / W) 2500 mm/min speed - faceplate:4-200 1/min torqe of face plate:1960 Nm dia of faceplate:630 mm movement of facing slide:180 mm weight of the machine ca.:11,5|18|20 t main drive:7,5 kW Machine size (LxWxH):5120x3380x3100 mm 2-Axis DRO :für X- und Y-Achse (von NEWALL) CE-design:von TÜV Süd servo motors:von Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor

:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mm x-travel:1600|2000|2000 mm y-travel:1400|1800|1800 mm z-travel:2000 mm U-axis:250 mm W-axis (spindle longitudinal):900 mm max. torque on the spindle:3200 Nm B-axis (table):360x1 ° rapid speed:X/Y/Z/W: 2500 mm/min table load:8|10|10 t table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm T-slots:9/11/12 Stk. T-slot - width:28 mm transmission ratio:4 Stk. spindle speed:4-800 1/min spindle taper:50 ISO faceplate:Drehmoment: 4900 Nm faceplate:2.5-125 1/min faceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mm weight of the machine ca.:22,5|24,5|25,5 t main drive:22 kW Machine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mm PLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130 ? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower mainten ...

x-travel:875 / 630 mm y-travel:500 mm z-travel:500 mm table-size:900 x 528 mm table load:0,4 t control:Heidenhain TNC 426 tool adaptor:SK 40 turning speed range:20 - 7000 U/min rapid speed:15 m/min feed speeds:1 - 12.000 mm/min power requirement:7,5 / 12 kW quill stroke:75 mm no. of tools in the magazine:16 Pos. dimensions:2,40 x 2,03 x 2,11 m weight of the machine ca.:4,8 t Universal machining center / universal milling machine, ATC can be removed, then is x-travel 875mm, el. handwheel, 3D touchprobe, manuals, video per whatsApp possible

spindle diameter:105 mm x-travel:2000 mm y-travel:1600 mm z-travel:1600 mm W-axis (spindle longitudinal):700 mm spindle taper: ISO:50 Speed of boring spindles:5 - 2000 U/min. b-axis:360 ° Table area:1200 x 1500 mm workpiece weight:5000 kg feed speeds:2 - 4000 mm/min rapid traverse:6 m/min total power requirement:65 kW weight of the machine ca.:17 t dimensions of the machine ca.:6,5 x 4,6 x 3,9 m CNC HEIDENHAIN TNC 426 working area protection coolant attachment

table diameter:1400 mm x-travel:2200 mm y-travel:1200 mm z-travel:1100 mm c-axis:360.000 x 0,001 b-axis:+/- 60 ° w-axis:350 mm distance spindle center to column::1100 mm table load:6 t spindle drive:15 kW Torque:4600 nM spindle turning speed range:10 - 1600 U/min spindle taper ISO:50 no. of tools in the magazine:20 Stück total power requirement:45 kW weight of the machine ca.:30 t dimensions of the machine ca.:5,8 x 5,8 x 4,9 m Machine complete overhould and retrofit in 2001 with SIEMENS 840 D control for 6 axis - tool changer for 20 tools - spindle quill 350 mm as W-axis - rotary table as C-axis - angualar milling head indexable - oil cooler, chip conveyor, hand operating panel.

spindle diameter:150 mm x-travel:5100 mm y-travel:3600 mm w-axis:1950 mm z-axis:1000 mm spindle drive:52 kW spindle turning speed range:5 - 1600 U/min spindle taper ISO:50 B-axis (table):0,001 ° table surface area:2500 x 2500 mm table load:30 to workpiece swing dia.:~6000 mm weight of the machine ca.:58 t total power requirement:85 kW dimensions of the machine ca.:10,5 x 8,6 x 6,9 m Machine retrofit and overhouled in 2007 with HEIDENHAIN TNC 530 control - angular milling head - exhauster - coolant device

Working spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Largest quill extension 1,600 mm Spindle speed in the range 0.8 - 630 min-1 Displacements in the range: drilling 0.63 - 2,500 mm / min milling 0.63 - 4,000 mm / min Power consumption of the spindle electric motor 77 kW Threads: metric 0.5 - 12 mm Whitworth 1 - 28 threads / 1 VERTICAL HEADREST TRAVEL ON STAND 3 150 mm TRAVEL OF THE STAND ON THE BED 6,000 mm BASE PLATE DIMENSIONS 12,800 x 5,665 mm

Work spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Largest spring extension 1,600 mm Spindle speed in the range of 0.8 - 630 min-1 Displacements in the range: drilling 0.63 - 2,500 mm / min Milling 0.63 - 4,000 mm / min Power consumption of the spindle electric motor 77 kW Thread: metric 0.5 - 12 mm Whitworth 1 - 28 threads / 1 VERTICAL HEADREST TRAVEL TO STAND 4,000 mm TRAVEL OF THE STAND ON THE BED 5,000 mm BASE PLATE DIMENSIONS 6,400 x 5,100 mm

Type: WHN 13A Parameters: 130 mm, 2000 mm Manufacturer: Tos Čelákovice Year of production / SO / GO: 1979 / - / - Description: Heidenhain control system Cross arrangement of beds Four axes + rotary table Retractable working spindle Machine designed for universal engineering production Heidenhain control system Axis strengthening hydraulically Machine parameters: X-axis 3510 Y axis 2040 Z axis 1200 W 800 axis incl. reinforcement, 600 without reinforcement Clamping surface of the table 1800 x 1800. The machine is connected, with the possibility to test. Bearings and damaged wheels must be replaced in the headstock.

CNC boring machine Brand: VITAP Type: POINT 2 New machine Vitaps smart solution for throughfeed drilling and grooving with autom. panel return to operator 3 controlled axis - Axe X Uninterrupted movement of the panel due to a ?New patented belt transport system?. - Axe Y Movement of the drilling head - Axe Z latest generation motor and ball screw. - No limit in panel length Perfect for batch 1: - Setup time = 0 - High productivity and flexibility Easy TPA programming - Monitor LCD TFT 19 5/4 Usb port for loading programs run on a station in each office - Cutting optimization Software - Graphics programming CAD TPA, base version - Saving all files with all data - Macro Programming - Import DXF files - Control: Full Parametric - Office programming software TPA Technical data: - 9 vertical independent spindles - 2+2 horizontal spindles on X ax ...

CNC boring- routering machine Brand: Vitap Type: K3 New machine Throughfeed process from the bottom and automatic panel return to the operator. Develop a new individual class: - With this machine you can do grooves and drill processings as well as different milling works, from simple edge milling to the milling of forms and letters. - There are no limits for your creativity Easy beginn with CNC programming: - TPA makes it easy: drillings, grooves, linear millings, form millings or the millings of letters - The CAD Software shows the processings on a virtual workpiece - Good overview about all processings on the single sides of the workpieces - Mirror function for parallel processings on other positions - Choose reference points via entering the exact position or just via click on the virtual workpiece Vitap Bar Nesting - efficient and time saving - This patent ...

Troughfeed boring machine Make: VITAP Type: ACOUSTIC For creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Three controlled axes: - X Axis - Panel movement by means of a strong pneumatic clamp - Y Axis - Boring head movement - Z Axis - Panel boring - Newly patented, high rigidity boring head movement on Y and Z axis. - Constant Side pusher: Side pusher with constant preload for perfect positioning of the panel on the machine zero point. - New frontal and more user friendly tool change system No limit in panel length High productivity and flexibility - The drilling head processes several holes at the same time - Different grids are possible also drilling grids with shift - Different drilling heads are optional available Easy TPA programming - Control: F ...

Semi-automatic boring machine Brand: VITAP Typ: ALFA 35 T New machine Technical data: - One boring head 35 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreese and any intermediate angles) - Frontal/top 51aliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator - Stroke regulation by means of 6 positions revolver (turret) (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mm) - Speed regulation of the boring group command by control board - Strengthened steel structures for tilting of the boring group - 1 motor HP. 3 (Kw 2,2) - Sta ...

Technische Daten: - Arbeitsbereich 2450 x 640 mm - 1. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - 2. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 3. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - max. Werkstückdicke 78 mm - max. Bohrtiefe vertikales Bohraggregat 70 mm - max. Bohrtiefe horizontales Bohraggregat 40 mm - Spindeldrehzahl 2800 U/min. - Motorleistung horizontales Bohraggregat 1,5 kW - Motorleistung vertikales Bohraggregat 1,5 kW - Gesamtleistung 4,5 kW - Spannung 400 V / 50 Hz - vertikale Bohraggregate verstellbar auf Linearführungen - Druckluftanschluss 8 bar - 8 Pneumatikspanner - Pneumatiksteuerung über Fußventil - SPS Steuerung mit bedienfreundlicher Touchscreen Bedienung - Sicherheitsreißleine - Abmessungen L=2700, B=2500, H=1760 mm - Gewicht 1500 kg

Technische Daten: - Arbeitsbereich 2450 x 640 mm - 1. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - 2. Bohraggregat mit 2 x 10 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 3. Bohraggregat mit 2 x 10 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 4. Bohraggregat mit 2 x 10 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - max. Werkstückdicke 78 mm - max. Bohrtiefe vertikales Bohraggregat 70 mm - max. Bohrtiefe horizontales Bohraggregat 40 mm - Spindeldrehzahl 2800 U/min. - Motorleistung horizontales Bohraggregat 1,5 kW - Motorleistung vertikales Bohraggregat 1,5 kW - Gesamtleistung 6,0 kW - Spannung 400 V / 50 Hz - vertikale Bohraggregate verstellbar auf Linearführungen - Druckluftanschluss 8 bar - 8 Pneumatikspanner - Pneumatiksteuerung über Fußventil - SPS Steuerung mit bedienfreundlicher Touchscreen Bedie ...

Technische Daten: - Arbeitsbereich 2450 x 640 mm - 1. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - 2. Bohraggregat mit 2 x 10 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 3. Bohraggregat mit 2 x 10 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - max. Werkstückdicke 78 mm - max. Bohrtiefe vertikales Bohraggregat 70 mm - max. Bohrtiefe horizontales Bohraggregat 40 mm - Spindeldrehzahl 2800 U/min. - Motorleistung horizontales Bohraggregat 1,5 kW - Motorleistung vertikales Bohraggregat 2 x 1,1 kW - Gesamtleistung 5,9 kW - Spannung 400 V / 50 Hz - vertikale Bohraggregate verstellbar auf Linearführungen - Druckluftanschluss 8 bar - 8 Pneumatikspanner - Pneumatiksteuerung über Fußventil - SPS Steuerung mit bedienfreundlicher Touchscreen Bedienung - Sicherheitsreißleine - Abmessungen L=2700, B=2500, H=1760 mm - Gewicht 1500 kg