jig boring machine used for sale

As good as new, see photos!

Control Heidenhain ... TNC 640 Spindle diameter ... 130mm Axis X ... 3500mm Axis Y ... 2500mm Spindle speed.. 10-3000/min. cooling ... 20bar Axis W ... 730mm Axis Z ... 1500mm SK 50 Table dimensions... 1800 x 2200mm Conveyor Workpiece touch probe TS 460 El. Handwheel HR 550 FS The machine is in good condition, possible to sample under electricity.

spindle diameter: 63 mm taper MK: 5 facing slide: ja digital: ja : ja weight of the machine ca.: 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Commissioning number 13019 With various clamping plates , Support surface each approx. 2000 x 1000 mm  , control: HEIDENHAIN, table surface area l x w : 2500x2000 mm, weight approx.: 120,000 kg, Approx. Onsite Dimension. (l x w x h): 16,000 x 10,000 x 5,500 mm

Description: Included - 3-axis digital display - Operation manual Spindle diameter 75 mm x-travel 850 mm y-travel 900 mm z-travel 950 mm Spindle holder ISO SK 40 Table size 1000 x 800 mm Total power requirement 16 kW Machine weight approx. 10.5 t Space requirement approx. 4.0 x 2.3 x 2.75 m weight approx.: 10,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,300 x 2,750 mm

Description: serial number AB00022204 Max. panel length mm 3.050 min. panel length mm 200, Max. panel width mm 900 min. panel width mm 80, Max. panel thickness mm 60 min. panel thickness mm 10 max. X axis speed m/min 40, Max.Y axis speed m/min 40 vertical spindles - drilling head F14L (vers. P/PR) no. 8 (5X-3Y) - drilling head F23L (vers.P F23/PR F23) no. 13 (7X – 6Y) horizontal spindles - drilling head F14L (vers. P/PR) no. 6 (2+2X-1+1Y) - drilling head F23L (vers.P F23/PR F23 no. 10 (3+3X-2+2Y) rotating spindles motor power kW (Hp) 2,2 (3) spindle speed rpm 4.200 fixed integrated disc cutter (direction) X max. diameter of disc cutter mm 125 disc cutter rotating speed rpm 5.500 ELECTROSPINDLE motor power KW (Hp) 5,5 min./max. speed rpm 1.000/18.000 tool changer manual max tool diameter mm 20 for futher technical detail please consult document ,PDF STARTE ...

Description: horizontal floory type boring machine Spindle diameter 125 mm x-travel 5600 mm y-travel 1600 mm z-travel 800 mm Spindle stroke 600 mm Spindle mount ISO 50 Spindle speeds 12 - 3000 rpm Spindle motor 40 kW Rapid traverse speed 15 m/min with CNC HEIDENHAIN iTNC 530 modernized in 2003 Tool changer 60 times Drilling work table RÜCKLE 2000 x 1800 mm max. 20 tons. workpiece weight Clamping plates 3500 x 2000 mm, 2500 x 2000 mm Coolant device z-motion: 800 mm, spindle diameter: 125 mm, x-motion: 5,600 mm, y-motion: 1,600 mm, control: CNC Heidenhain iTNC 530 modernisiert in 2003, table surface area l x w : 2000x1800 mm, spindle taper: ISO 50, turning speed range: 12-3000 rpm, total power requirement: 65 kW, weight approx.: 60,000 kg, Approx. Onsite Dimension. (l x w x h): 12,100 x 4,800 x 3,900 mm

Description: 40 tool ATC 20 bar spindle thru coolant Full cover Chip conveyor Fanuc 31iA controller Important Note - Angle plate and tool are excluded. Includes shipping to any major seaport in the world. x-motion: 3,000 mm, y-motion: 2,000 mm, z-motion: 2,000 mm, w - axis: 700 mm, table surface area l x w : 1,800 x 2,200 mm, weight approx.: 43,000 kg, Approx. Onsite Dimension. (l x w x h): 8,970 x 7,660 x 4,910 mm

Description: travels: X-axis: 10000 mm Y-axis: 3300 mm Z-axis: 1000 mm power: 30 kW spindle speed: 20 - 2500 rpm spindle taper: ISO 50 tool changer positions: 40 max tool diameter: 280 mm max tool length: 480 mm max tool weight: 30 kg x-motion: 10,000 mm, y-motion: 3,300 mm, z-motion: 1,000 mm, turning speed range: 20 - 2500 rpm, tool taper: ISO 50, total power requirement: 30 kW, weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 11,000 x 5,000 x 5,000 mm

Description: Longitudinal travel of upright X 10,000 ,mm Spindle head vertical travel Y 3,300 mm RAM transverse travel Z 1,100 mm Spindle quill travel W (boring bar) 800 mm Translating travel C 2,000 mm Turntable plate positions B 360,000 n Turntable size 2,700 x 2,700 mm Drilling unit vertical travel V 2,700 mm Drilling unit transversal travel U 500 mm SELCA S4045PD control Serial number 02-021.021 Dig depth 2000 mm z-motion: 1,200 mm, table surface area l x w : 2700 x 2700 mm, control: SELCA 4045PD, power capacity - spindle: 50 kW, weight approx.: 160,000 kg, Approx. Onsite Dimension. (l x w x h): 19,000 x 10,000 x 6,000 mm

Description: serial number: KOSPAR/2025/08/2017 working hours: power on time: approx. 5460 hrs. run time: approx. 3129 hrs. cutting time: approx. 1233 hrs.  , max. component diameter: ,160 mm min. component diameter: ,50 mm max. component length: ,1000 mm min. component length: ,100 mm max. spindle working speed: ,1400 rpm min. spindle working speed: ,600 rpm  , overall dimensions including with all conveyors: ,5500 x 5450 x 2400 mm  , transport dimensions: machine: ,5100 x 1700 x 2400 mm feeder: ,2200 x 1400 x 1300 mm receiver: ,2200 x 1400 x 1300 mm chip conveyor: ,4950 x 1000 x 1900 mm  , tools are not included in the offer except the standard set of 4 clamping jaws  , please also have a look at the videos and the PDF document of this machine weight approx.: 6,700 kg, Approx. Onsite ...

:FB-160 spindle diameter:160 mm x-travel:4000/6000/8000/10000/12000/14000/16000 mm y-travel:2000/2500/3000/3500/4000 mm z-axis:1200 mm w-axis:700 mm spindle cone:50 SK/BT spindle speed max.:3000 U/min spindle drive:37/51 kW feeds:X/Y/Z/W: 10 / 10 / 10 / 8 / 5 m/min rapid speed:X/Y/Z/W: 20 / 20 / 20 / 10 / 5 m/min max. torque on the spindle:3.300 Nm cross section of ram:460x520 mm table load:30 t table-size:2500x2500 mm table travel:1500 mm weight of the machine ca.:FBM-160 mit X=4m: 80 t positioning accuracy:0.032/1000 mm repeating accuracy:0.018/1000 mm CNC controller:Siemens/Fanuc/Heidenhain CNC controls from:Siemens/Fanuc/Heidenhain Factory-new CNC controlled panel drilling machine with CNC control from Siemens / Fanuc / Heidenhain. All essential components from well-known manufacturers such as Siemens, SKF, FAG, Heidenhain, Igus and many more. Newly developed FB series Convenient fo ...

x-axis:16000 mm y-axis:1250 mm z-axis:3200 mm total power requirement:37 kW speeds:2000 U/min Soraluce milling machine FR 16000 Angle head pivotable: 2.5° Drive power: 37 KW The machine was completely overhauled in 2009: new cables, new controls. Can be viewed under power at any time - without machine table, without rotary table, without chip conveyor -- is in good condition (inspection under power is possible)

spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:1600 U/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored

table length:2200 mm table width:2500 mm table load:16 t total power requirement:6,5 kW feed speeds:1,25 - 160 mm/min rapid traverse speed:2000 mm/min longitudinal adjustment:1500 mm weight of the machine ca.:12 t dimensions of the machine ca.:4,1 x 2,65 x 0,95 m

spindle diameter:160 mm x-travel:6000 mm y-travel:5000 mm z-axis:1500 mm dimension of the ram:470 x 500 mm w-axis:900 mm spindle taper ISO:50 spindle turning speed range:1 -3000 U/min spindle motor:71 kW feed speeds:1 - 5000 mm/min rapid speed:25 m/min total power requirement:187,6 kW dimensions of the machine ca.:14,1 x 13,4 x ü.F.7,8 m Machine in mint condition ! with CNC control HEIDENHAIN iTNC 530 autom. toolchanger 80 - pockets CNC Rotary Table 4000 x 4000 mm max. table load 75 to. longitudinal movement V-axis 1500 mm autom. head changer with universal Milling Head universal high speed milling head 5-axis 18000 rpm RENISHAW measuring probe belt filtering unit and through spindle coolant chip conveyor

spindle diameter:130 mm x-travel:10000 mm y-travel:2500 mm z-axis:800 mm w-axis:750 mm spindle taper ISO:50 spindle turning speed range:1 - 3000 U/min power maindrive:37 kW feed speeds:1 - 6000 mm/min rapid speed:15 m/min total power requirement:90 kW with CNC control HEIDENHAIN TNC 430 - automatic toolchanger 60-pockets - NC rotary table 2500 x 2000 mm max table load 20 to. - longitudinal movement table 1500 mm - floor plate 5000 x 2000 mm, angle clamping plate, chip conveyor - coolant attachment with through spindle coolant 30 l/min. 20 bar

X / Y / Z / W = 8000/3200/1600/1250 Working spindle diameter 160 mm Spindle taper M 100 Maximum spindle drilling depth 1,600 mm Largest quill extension 1,250 mm Spindle speed in the range of 2 - 800 min-1 Displacements in the range: drilling 0.5 - 1,600 mm / min milling 0.5 - 3,200 mm / min Power consumption of the spindle electric motor 6 - 55 kW Threads: metric Whitworth 0.5 - 12 mm 1 - 28 thread / 1 VERTICAL HEADBOARD TRAVEL ON STAND 2,500 mm TRAVEL OF THE STAND ON THE BED 6,000 mm MOTHERBOARD DIMENSIONS 8,000 x 5,500

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

! A B S O L U T E R S O N D E R R R E I S ! Drill grinding machine manufacturer Avyac from France, Built in 1983, Weight 800kg, Fully automatic with praezisions 6 jaw lining for drills up to 51mm. All dimensions of a drill can be adjusted. Machine under power ready for use. Special price Alzmetall Gühring Garant MK2 MK32 MK4 MK5 Flott Gillardon

Universal riener, double riening machine, brake coating riener e.g. for rivets of couplings or brake belhighs Adjustable distance Ideal for faithful restoration and maintenance of classic cars Rest according to photos Special price

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Make : TREPKO Model : PKG 1S Cups : 8 Circles pre Minute : 32-40 Cup Sizes : 75 and 95mm Filling Volume : 50gr -500gr Stations : Cup denester - Filling - Aluminium Placing - Heat Sealing - Conveyor Condition : Good HEPA Filter Mounted Closed Cabin Safety Switches Control Panel Available : Immediately

-Winding unit with right winding sense -Winding buckthorn holder for coils Inner diameter 2-5mm -Winding number 2-30 -Wire thickness 0.25-1mm -Gear translation AA + DD -Roller-drht richter -380V; 50Hz; -Documentation, spare parts plans Explusinszeichnungen and schematic available -Dimensions Space requirement 675 H430 735mm low Ehcubsv -Weight 65Kg

Cup filling and sealing machine 67/95mm YOM 2014. As new, Only been used for a week.

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.