jig boring machine used for sale

Technische Daten: - Arbeitsbereich 2450 x 640 mm - 1. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - 2. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 3. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 4. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - max. Werkstückdicke 78 mm - max. Bohrtiefe vertikales Bohraggregat 70 mm - max. Bohrtiefe horizontales Bohraggregat 40 mm - Spindeldrehzahl 2800 U/min. - Motorleistung horizontales Bohraggregat 1,5 kW - Motorleistung vertikales Bohraggregat 1,5 kW - Gesamtleistung 6,0 kW - Spannung 400 V / 50 Hz - vertikale Bohraggregate verstellbar auf Linearführungen - Druckluftanschluss 8 bar - 8 Pneumatikspanner - Pneumatiksteuerung über Fußventil - SPS Steuerung mit bedienfreundlicher Touchscreen Bedienung - Sicherheitsreiß ...

Technische Daten: - max. Werkstückabmessung/Bohrabstand L= 2600 mm, B=672 mm - min. Werkstückabmessung/Bohrabstand L= 200 mm, B= 32 mm - 2 horizontale Bohrgetriebe mit 22 Spindeln, Teilung 32 mm für stirnseitige Bohrungen - 4 vertikale Supporte von unten mit 8 Bohrgetrieben je 11 Spindeln, Teilung 32 mm für flächenseitige Bohrungen, 45Cdrehbar - Bohrgetriebe mit Schnellspannfutter, Schaftaufnahme Durchmesser 10 mm - max. Bohrer FI horizontal 13 mm - max. Bohrer FI vertikal 35 mm - Bohrtiefe horizontal 0 - 60 mm - Bohrtiefe vertikal 0 - 60 mm - Spindeldrehzahl 2840 U/min. - Gesamtleistung 11,8 kW / 400 V, 50 Hz - Arbeitshöhe 950 mm - Einstellung der vertikalen Bohraggregate über digitale Positionszaehler 0,1 mm Genauigkeit - Verfahrung der vertikalen Bohraggregate über Linearführungen mit pneumatischer Arretierung - 8 vertikale Pneumatikspanner - Pneumatiksteuerung über Fußven ...

For sale: San Rocco CNC boring mill type MEC 100 with Siemens 810 control. Longitudinal and transverse movement is 1,200 x 2,000 mm, table size is 1,100 x 1,300 mm and is equipped with a full-fledged C-axis / spindle diameter is 100 mm with ISO-50 holder. The drilling spindle movement is 700 mm, the maximum spindle speed is from 2 to 1,000 rpm in 4 stages. The machine is in good condition and has an X, Y and Z axis and a full-fledged C axis and a W axis (drilling spindle 700 mm) You can move 2 axes simultaneously. You can mill around on the machine. Can still be visited under electricity, subject to prior sale.

Manufacturer: PAMA, Italy Model: AT 130/3 CNC Year of manufacture: 1996 Control: CNC SIEMENS SINUMERIK 828 Condition: Excellent, complete, machine will be equipped with a new CNC control SINUMERIK 828! Location: Machine in our warehouse Rudniki, Poland. Technical details Spindle diameter: ø 130 mm Rotary table: 1600 x 1600 mm Table capacity: 12000 kg X axis travel: 2500 mm Y axis travel: 2400 mm Z axis travel: 750 mm W axis travel: 2030 mm Max spindle speeds: 2200 RPM Main motor Power: 35 KW ATC magazine: 100 pcs Rapid feeds: - X- 10,000 mm/min - Y- 12,000 mm/min - Z- 6,000 mm/min - W – 12,000 mm/min - B – 2 Gear steps 2 ranges Torque in axes: X- 55 Nm; Y- W-B- 37 Nm; Z- 27 Nm Weight: 35 kg Max. tool diameter with all places occupied: 140 Max. tool length: 600 mm Equipment: - 1 psc.Rotary table - ATC for 100 pcs - APC 2 pcs 1600 x 1600 mm - External  ...

Aufspannflaeche 3,000 x 2,000 mms table height 1,150 mms

Technische Daten: - Arbeitsbereich 2450 x 640 mm - 1. Bohraggregat mit 20 Spindeln, Teilung 32 mm für horizontale Bohrungen - 2. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 3. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - 4. Bohraggregat mit 20 Spindeln, Teilung 32 mm für vertikale Bohrungen, 90C drehbar - max. Werkstückdicke 78 mm - max. Bohrtiefe vertikales Bohraggregat 70 mm - max. Bohrtiefe horizontales Bohraggregat 40 mm - Spindeldrehzahl 2800 U/min. - Motorleistung horizontales Bohraggregat 1,5 kW - Motorleistung vertikales Bohraggregat 1,5 kW - Gesamtleistung 6,0 kW - Spannung 400 V / 50 Hz - vertikale Bohraggregate verstellbar auf Linearführungen - Druckluftanschluss 8 bar - 8 Pneumatikspanner - Pneumatiksteuerung über Fußventil - SPS Steuerung mit bedienfreundlicher Touchscreen Bedienung - Siche ...

in cassette

in cassette

Code 71145 Description Horizontal table borer Make UNION Model BFT 80 / 3-1 Serial number 18301 / 34 Year 1986 Spindle 80 mm Spindle taper ISO 40 Spindle out (W) 710 mm Table 1120 x 1000 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 2500 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Size L x W x H 5500 x 3200 x 2800 mm Weigth 9 ton Accessoiries Facing head Ø 460 mm with 180 mm stroke 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead Condition Machine is in good condition

Code 61080 Description Horizontal table borer Make UNION Model BFT 90/3 at Serial number 25 742 Year 1979 ( 1980 in use ) Control Heidenhain TNC 121 Spindle 102 mm Spindle taper ISO 50 Spindle out (W) 710 mm Table 1400 x 1250 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm Weight on table 3000 kg 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 3000 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Accessoiries 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead with 600 mm gap

table length: 1500 mm table width: 1500 mm table load: 10 t voltage: 380 V Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: MAZATROL CAM M-2 Technical data Table length: 1240 mm Table width: 550 mm Longitudinal travel (X-axis): 1000 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 660 mm Table load max.: 800 kg Taper in spindle: 40 ISO Spindle speeds: stepless vertical from: 28 rpm up to: 4000 rpm Tool changer: number of tools: 30 Tool diameter: 100 mm Diameter with free adjacent pockets: 130 mm Max. tool-weight: 7 kg Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 5.5 kW Machine´s weight about: 6500 kg Overall dimensions machine: Length: 3000 mm Width: 2920 mm Height: 3200 mm Various accessories: Full splash cabin Coolant system Tool changer: (number of tools): 30

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: MAHO CNC 432 Technical data Rotary table:diameter: 400 mm Longitudinal travel (X-axis): 400 mm cross travel (Z-axis): 350 mm vertical travel (Y-axis): 375 mm Table load max.: 160 kg Taper in spindle: 40 ISO Spindle speeds: stepless horizontal from: 20 rpm up to: 3150 rpm vertical from: 20 rpm up to: 3150 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 9 kVA Machine´s weight about: 1600 kg Overall dimensions machine: Length: 1600 mm Width: 2200 mm Height: 1670 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: MAHO 432 Operating hours: 7002 Technical data Table length: 900 mm Table width: 600 mm Longitudinal travel (X-axis): 800 mm cross travel (Z-axis): 550 mm vertical travel (Y-axis): 500 mm Table load max.: 450 kg Taper in spindle: 40 ISO Spindle speeds: stepless horizontal from: 20 rpm up to: 5000 rpm vertical from: 20 rpm up to: 5000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 4000 mm/min transversal from: 1 mm/min up to: 4000 mm/min vertical from: 1 mm/min up to: 4000 mm/min Rapid traverse:: 6 m/min Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 10 kW Machine´s weight about: 5000 kg Overall dimensions machine: Length: 3000 mm Width: 2200 mm Height: 2100 mm Various accessories: Vice: width: 125 mm In ...

Manufactured by Sverdlov plans (Russia) Year of manufacture 1960/2000 - this machine was completely modernized for company ALSTOM Spindle diameter, mm 110 Spindle cone: Morse 50 Table effective area, mm 1120 x 1250 Max. work piece weight, kg 4000 Spindle speed range, rpm 10...1250 Movement of axis Y/W/Z/X, mm 1000/710/1000/1250 Rapid feed, mm/min 5000 Main electric motor power, kW 11 Total power required, kW 25 Machine dimensions, mm 6100 x 3950 x 3200 Machine weight, kg 17000 Horizontal boring machine is in excellent condition, equipped with DRO and Faceplate.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: PROTO TRAK A.G.E. 3 Technical data Number of axis total: 3 Table length: 1270 mm Table width: 320 mm Longitudinal travel (X-axis): 750 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 610 mm Table load max.: 600 kg Distance from vertical spindle to table: 610 mm Distance from spindle axis to slide ways: 480 mm Taper in spindle: 40 ISO Spindle speeds: number (steps): 2 from: 5 rpm up to: 3600 rpm Swivel range Vertical milling head: -90 / +90 ° Feeds (X, Y, Z): 5 - 3800 mm/min Vertical quill travel: 120 mm Quill feed speed: 0.04 / 0.08 / 0.15 mm/r Drill capacity in steel: 35 mm Threat cutting in steel M: 36 Milling capacity in steel: 80 - 150 cm3/min Boringout: 120 mm Voltage 50 Hz 3x: 415 Volt Milling ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC 0i - MD 7 512 kB / Touch screen Technical data Table length: 300 mm Table width: 260 mm Longitudinal travel (X-axis): 150 mm Transversal travel (y axis): 225+50 ATC mm Vertical travel (z axis): 200 mm Table load max.: 80 kg Distance from vertical spindle to table: 140 ~ 340 mm Taper in spindle: HSK-E32 Spindle speeds: stepless vertical from: 100 rpm up to: 30000 rpm Tool changer: number of tools: 17 Rapid traverse:: 30 m/min Milling spindle motor: 3.0 / 4.5 kW Total power required: 12 kVA Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1750 mm Width: 600 mm Height: 1800 mm Various accessories: Handwheel electroinic Full splash cabin Coolant system: 120 ltr. Tool changer: (number of tools): ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: PHILIPS 132 Technical data Table length: 740 mm Table width: 440 mm Longitudinal travel (X-axis): 500 mm Cross travel (z-axis): 300 mm vertical travel (Y-axis): 400 mm Taper in spindle: 40 ISO Spindle speeds: stepless horizontal from: 63 rpm up to: 4000 rpm vertical from: 63 rpm up to: 4000 rpm Feeds: stepless longitudinal from: 1.0 mm/min up to: 3000 mm/min transversal from: 1.0 mm/min up to: 3000 mm/min vertical from: 1.0 mm/min up to: 3000 mm/min Rapid traverse: long.: 5 m/min Rapid traverse: transversal: 5 m/min Rapid traverse: vertical: 5 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 5 HP Machine´s weight about: 1700 kg Overall dimensions machine: Length: 1800 mm Width: 2200 mm Height: 1900 mm Various acc ...

Control: HEIDENHAIN TNC 360 Technical data Table length: 900 mm Table width: 530 mm Longitudinal travel (X-axis): 560 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 400 mm Spindle speeds: stepless horizontal from: 5 rpm up to: 5000 rpm vertical from: 5 rpm up to: 5000 rpm Spindle nose: ISO: SK 40 DIN 69871 Feeds: longitudinal from: 1 mm/min up to: 8000 mm/min transversal from: 1 mm/min up to: 8000 mm/min vertical from: 1 mm/min up to: 8000 mm/min Rapid traverse:: 10 m/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3350 kg Overall dimensions machine: Length: 3930 (2625) mm Width: 2650 mm Height: 2140 mm Various accessories: Electronic hand held control Coolant system

Control: HEIDENHAIN TNC 426 Operating hours: 45357 Technical data Table length: 1200 mm Table width: 600 mm Longitudinal travel (X-axis): 710 mm Transversal travel (y axis): 630 mm Vertical travel (z axis): 500 mm Spindle speeds: up to: 6300 (42´000) rpm Tool changer: number of tools: 20 Feeds: longitudinal from: 0 mm/min up to: 15000 mm/min transversal from: 0 mm/min up to: 15000 mm/min vertical from: 0 mm/min Milling spindle motor: 11 kW Machine´s weight about: 4690 kg Overall dimensions machine: Length: 4700 mm Width: 2100 mm Height: 2700 mm Various accessories: Rigide table High frequency spindle: 42000 rpm Manufacturer: FISCHER Set of toolholders Oil mist extractor: FIBARON

Control: HEIDENHAIN TNC 355 Technical data Number of axis total: 3 Table length: 1200 mm Table width: 600 mm Number of T-channels: 9 T-channel width: 14H7 mm Table load max.: 700 kg Longitudinal travel (X-axis): 710 mm Transversal travel (y axis): 630 mm Vertical travel (z axis): 500 mm Distance from vertical spindle to table: 65 - 565 mm Spindle speeds: stepless from: 10 rpm up to: 6300 rpm Tool changer: number of tools: 40 Spindle nose: ISO: 40 Feeds (X, Y, Z): 2 - 4000 mm/min Feeds: Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 10 m/min Rapid traverse: vertical: 8 m/min Stroke of horizontal spindle: 100 mm Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 15 kW Machine´s weight about: 7000 kg Overall dimensions machine: Length: 3500 mm Width: 2400 mm Height: 2400 mm Various accessories: Rigide table Electronic hand held control Hydraulic work-piece clamping Full ...

Fanuc 15 M control. 2x Pallets 1,600 x 1,800 mm. Pallet load 6 t. B-axis 0.001. X 3,300 mm. Y 1,800 mm. Z 1,300 mm W 700 mm. Eilgaenge X,Y,Z 10,000 mm/min. Drilling spindle diameter 130 mm. Spindle holder ISO 50. Spindle drive power 22/26 kW. Spindle speeds 5 - 2,500 rpm. tool changer. tool magazine positions 90 times. all-round cladding. ; Well

Fanuc 15 M Control. 2x Pallets 1600 x 1800 mm. Pallet load max. 6t. B-Axis 0.001°. X 3300 mm. Y 1800 mm. Z 1300 mm. W 700 mm. Rapids to 10000 mm/min. Boring spindle diameter 130 mm. Spindle taper ISO 50. Spindle drive motor rating 22/26 KW. Spindle speeds 5 - 2500 rpm. Tool changer. 90 station tool magazine. Chip and splash guarding. ; Good

Horizontal CNC drilling and milling machine make PFEIFER type F 105 CNCFabr. -No: 2399, built in 1991Technical specifications:Travel X: 1600 mmY: 1000 mmZ: 1000 mmSpindle diameter: 105 mmSpindle mount: ISO 50Quill stroke: 500 mmDistance from the center of the spindle to the clamping surface: 0 - 1000 mmmax.workpiece weight: 4000 kgSlewing ring diameter: 830 mmClamping area: 1000 x 1200 mmTable height above floor: 875 mmExternal dimensions: 4830 x 3040 x 2700 mmWeight: 10850 kgwith- Control Heidenhain TNC 355- Measuring device actual value display X, Y, Z, W- hydr. Clamping- automatic central lubrication- Liquid cooling device- Ball screws X, Y, Z, W- fixators- Ampere meter- oil cooling- electr. HR 250 handwheel- mech. Hand crossused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bi ...

Drilling and milling machine make WOTAN type B 75 TFabr. -No: 58252 Year of construction 1965Spindle diameter: 75 mmTransverse travel = X: 800 mmLongitudinal path = Y: 800 mmVertical path = Z: 800 mmSpindle stroke = W: 600 mmDrill spindle inner cone: ISO 40Drilling depth in one go without quick tension: 600 mmwith quick tension: 550 mmVertical adjustment above table: 0 - 800 mm20 spindle speeds: 12.5 x 1000 rpm.Table mounting surface: 800 x 1000 mmSwivel range: 360 °Transverse movement: 800 mmLongitudinal movement: 800 mm27 feed steps: 0.02 - 8 mm / revRapid traverse: 2.4 m / min12 metric thread pitches: 0.5 - 8 mmFaceplate diameter: 420 mmmax. facing diameter: 560 mmMovement of the slide valve: 120 mmFeed range: 0.04 - 16 mm / revDrive power: 9 hpDimensions approx: 3400 x 1800 x 2500 mmWeight approx: 6800 kgWith- 3-axis digital display- Cooling devicedespite the year of construction in ...

Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm . X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &aci ...

Control system Heidenhain TNC 415 Spindle diameter 130 mm Tapered hollow spindle ISO 50 Spindle speed range 10 to 1500 rpm Table transverse (X): 3500 mm Rolling headstock stand for (Y): 2000 mm Longitudinal displacement rack (W): 1250 mm Eject working spindle (Z): 800 mm Table load 12 000 kg Machine weight: 36 000 kg

TOS WHN 130 MC used machine Specifications System Heidenhain TNC 426 Working range Spindle diameter 140 [mm] Taper in the spindle ISO 50 Table transverse adjustment (X) 3000 [mm] Vertical headstock adjustment (Y) 2000 [mm] Vertical travel (Z) 1250 [mm] Spindle stroke (W) 560 [mm] 2X Clamping surface 1800 x 1600 [mm] Speed range 10 - 2500 [rpm] Main motor output 37,0 [kW] Max. workpiece weightƒ 8000 [kg] Accessories Tool changer for 60pcs Tool cooling Chip conveyor

Technical data Spindle dia 125mm ISA 50 taper stroke of the spindle 800 mm cross travel of table X 1200 mm vert. travel of headstock Y 1400 mm longit. ztravel of the table Z 1620 mm spindle speed infinitely variable 3,5-700 rpm table size 1200 x 1400 mm table load 6000 kg main motor DC 19 kw total input 22,79 kW spindle feed inf. variable 0 - 1,25 mm/rot working feeds inf. variable 0,3 - 1700 mm/min rapid traverse 2250 mm/min fine feed 3mm/min dimension LxWxH 7,4 x 4,8 x 3,6 m weight of the machine 21000 kg DRO Heidenhain

Skoda W 160 H/NR CNC Travel x= 14.500mm (bed is for the travel 18,500mm) Travel Y= 3.150mm Travel Z= 1.600mm Travel W= 1.250mm Spindle diameter 160mm Machine with ball screw Many accessories available: CNC control Siemens SINUMERIC 850 Rotary table ISO 16 2.200 x 2.200mm, capacity 16 ton included Chip conweyor : 19.000 mm + 12.000 mm Floor plates

W 200G with Siemens AC main motor. modernized the main drive by instalation of Siemens AC motor with SIMODRIVE 611. Original built ISO 60 taper and 630 rpm Main data: X=8000 mm Y=4150 mm Z =1600 mm W=2000 mm Spindle dia 200mm ISO 60 spindle speed max 800 rpm Accessories: DRO Philips available as original rotary table E 20 4 floor plates 5600x1880x400mm milling head IFH 1 and IFW 3 counter steady SKODA IOT 4150

W100A Parameters 100mm, 1600mm Diameter of working spindle 100 mm Taper in spindle morse 6. Longitudinal adjustment of table (z) 1450 mm Cross adjustment of table (x) 1600 mm Motion of work head on frame (y) 1120 mm Slip out of working spindle (w) 900 mm Clamping area of table 1250 x 1250 mm Dimensions l x w x h 6710 x 3450 x 3000 mm Machine weight 14 000 kg Accessories: face plate, tail stock

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

Wohlhaupter turning head in the suitcase Wohlhaupter UPA6/3944 in a wooden case with accessories SK50 Type UPA6

- Structure in stainless steel - Workpiece fixing system - Table adjustable - 2 milling spindles - 2 multifunction drilling spindles - Switch box

Technical data of the used PAMA Speedram 2 boring machine: Spindle diameter: 150 mm Spindle taper: ISO 50 Milling spindle diameter: 254 mm RAM section: 360x400 mm Axes travels: Vertical travel (Y): 3200 mm Column travel (X): 10.200 mm Boring spindle travel (Z): 700 mm Axial stroke of the spindle tube (W): 800 mm Total axes travel (Z+W): 1500 mm Spindle speed: 1600 rpm Feeds rate: Working feeds: 1 + 6000 mm/min Rapid feed (X-Y-Z-W): 10.000 mm/min Power: Spindle motor: 65/40 kW Axis motors (X-Y): 65 Nm/each Axis motors (Z-W): 38 Nm Total power: 105 kW Rotary table: Dimensions: 2000 x 2000 mm Longitudinal travel: 1750 mm Table rotation feeds: 0,001 rpm Rotation feed: 1-1.5 rpm Motor power: 10 hP Max weight on table: 15.000 kg

Horizontal borer Wotan B105Y Spindle: 120 mm Travels: -X: 3000 mm -Y: 1450 mm -Z: 1280 mm Table: -1400 x 3000 mm -Rotating part: 1130 x 1500 mm (manually rotated to any degrees) -Max load: 7 tn Machine weight: about 25 ton

(FP 50-13) - vertical milling head accessories for the WH 10 CNC and WHN(Q) 13 CNC machines milling operations of vertical and in surfaces manually fastening on the machine, manually clamping of tools

Scharmann boring mill Ecocut 1.1 TDV 3 / Retrofit in 2015, Year of construction 1983 / Retrofit 2015 by Scharmann Control Siemens 840 D, Travel X/Y/Z/W 2000/1450/1400/600 mm, Table clamping surface 120 x 1600 mm, Enclosure open at the top installed in 2015, Feeds up to 6 m/min, spindle speed up to 3,000 rpm - 30 KW, Machine does not need a foundation ! due to the self-designed polymer bed, max workpiece weight 12,000 kg, Machine weight 24,350 kg, complete documentation, Additional equipment: A CNC-controlled face plate is integrated in the drill quill. With this device, contours up to Ø600 can be rotated Services provided during retrofitting The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015. During the overhaul, the entire electrical system was replaced and the control system was ...

Digital Table area 800 x 900 mm Cross-stroke table 1200 mm Drilling depth 700 mm Vertical stroke 900 mm Tool holder ISO 50

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

Planausdrehkpof Wohlhaupter UPA 5 with accessories as shown. Cone ISO 50

Inv. Num. : 5479 Type: PC W 200 HA Producer: ŠKODA Created: 1987 Parameters: Spindle drive power: 77 kW Minimum spindle speed: 0.8 1/min Maximum spindle speed: 630 1/min Mechanical feed length axis X: 4000 mm Maximum feed speed axis X: 4000 mm/min Maximum feed speed axis Y: 4000 mm/min Maximum feed speed axis Z: 4000 mm/min Cone: ISO 60 Spindle diameter: 200 mm Maximum turning-out depth: 2000 mm Spindle extension: 1600 mm Base size: 6400 x 5100 mm Ride of the stand on the bed: 5000 mm

Code 71144 Description Horizontal table borer Make PFEIFER Model F 80 / 100 Serial number 2342 Year 1982 Spindle 100 mm Spindle taper 50 ISO Spindle out (W) 500 mm Table 1000 x 850 mm Cross (X) 1200 mm Longitudinal (Z) 800 mm Vertical (Y) 800 mm Distance table-spindle 0 x 800 mm Speeds 18 steps Spindle speeds 14 – 1500 rpm 16 Feeds 0,03 – 6,0 mm/rev Rapids 2500 mm/rev Rapids all directions ( X-Y-Z-W-B) Motor 7,5 kW 380 Volts Accessoiries X-Y-Z axis are BALLSCREWS Tool clamping Pendant control Condition Machine is in very good condition

UNUSED: Facinghead of a Wotan BF 160 Horizontal borer.

bore diameter: 620 mm spindle diameter: 130 mm bore depth: 320 mm feed stepless: 0 - 12 mm/min turning speeds: 10 - 70 U/min voltage: 380 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,0 x 1,2 x 1,3 m transportable drilling out work, completely ready for connection gear of drill spindle runs over LENZE planetary drive advanced feed with LENZE direct current motor, output: 160 watt clockwise and counterclockwise with tool holder for Ø 420 x 620 mm, tool holder for tooling equipment fabri. LENZ LPAS 3, diverse turning steel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: . mm x-travel: . mm y-travel: . mm table length: 2000 mm table width: 2000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 5000 mm y-travel: 3000 mm control: Heidenhain TNC 426 taper ISO: 50 P.D.B. w-axis: 900 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Right Angle Vertical Head Spindle Support Metal Way Covers Operator Platform The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 900 mm y-travel: 600 mm z-axis: 200 mm table length: 1020 mm table width: 860 mm taper MK: 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load  ...