jig boring machine used for sale

WALDRICH SIEGEN HFB-200 CNC Horizontal Boring & Mill MC Built 1978 / 2007 X=15.000, Y=5.000, Z=1.500, W=1.200mm Spindle diam. 200mm ISO 50+60, 90kW SIEMENS 840 D ATC 90 Table 5.200x5.200mm, X travel 3.300mm max. loading 100 Ton Rotation 360.000° Floorplates 6.000 x 10.000mm Hydrostatic Many heads This machine was used in final cutting and boring, drilling of big vessel engine cylinder blocks in STX Engine. It can be done the straight and inclined direction drilling &boring. It means the spindle head can be tilted. It is very high accuracy machine. This machine is in assembled condition but not under power

PAMA 200 CNC Floor Type Horizontal Boring & Milling machine Built 1997 / 2013 X=16.000, Y=6.000, Z=1.330, W=830mm Spindle diam. 200mm ISO 50/60 Spindle RPM: 1-680 75HP CNC FANUC 31i-M Table 5.000x5.000mm, X travel 2.500mm max. loading 120 Ton Rotation 360.000° Floorplates 4.000 x 15.000mm Chip conveyor Angle head This machine disassembled end of 2021. It was in a very good condition.

Catalog No. : 6346 Type: WHN 13 A Producer: TOS Made in: 1980 Characteristic: Control system: MEFI CNC 859 Length of the working table: 1600 mm Width of the working table: 1800 mm Maximum rotary speed of the spindle: 2800 1/min X-Axis travels: 2000 mm Y-Axis travels: 1600 mm Z-Axis travels: 1200 mm Power of the spindle: 38 kW Machine weight: 34.600 kg Replaced ball screws. Measuring each IRC axis separately. Drives separately each XYZ axis.

Mitsubishi MAF 240/180B CNC Floor Type HBM, New 1980 (Recontrolled in 1999) Condition: Very Good Type of CNC Control: Gidding & Lewis 8000B CNC Control - Recontrolled 1999 Spindle Diameter: 7.08"(180mm) Milling spindle diameter: 9.44"(240mm) Vertical Head Travel, Y-Axis: 169"(4300mm) Horizontal Column Travel, X-Axis: 1200" (30500mm) Headstock Travel, Z-1 Axis: 47.24"(1200mm) Spindle Travel, Z-2 Axis: 47.24" Total Axial Travel: 94.49"(2400mm) Rapid Traverse, X&Y Axes: 315 IPM Rapid traverse, Z, W and U Axes: 197 IPM Spindle Taper: CAT #50 Spindle Speeds: 6-1200 RPM - (3-Steps) Max. Spindle Thrust: 11,000 Lbs Constant Power Range: 79-1200 RPM Rotary Table Manufacture and Model: Mitsubishi DIT-A21X30 Rotary Table Size: 82" x 118" (2100x3000mm T-Slotted Rotary Table Max. Weight Capacity: 30 Tons Rotary Table Type: Insliding Rotary Inslide Travel: 59" (1500mm) Rotary Ta ...

used flat and boring head D'Andrea TA120 with SK40 mount.

CNC Floor Type Boring & Milling Machine   PAMA Speedram 1000   Manufactured new in 2008 - with only 4500 program run hours   Heidenhain iTNC 530 CNC Control   X 13000 mm   Y 3000 mm   Z 1000 mm   W 700 mm   Pama NC-Rotary travelling table   Table size 2000 x 2200 mm   Table load 16 t   B-Axis 360°/0.001° with contour milling capability   V-Axis table travel 2000 mm   Boring spindle diameter 150 mm   Spindle taper ISO 50   Spindle drive 37 KW   Spindle speeds to 3500 rpm   Floor plates   Huron type universal head   X,Y,Z hydrostatics   Optical scales X,Y,Z,V Axes   Linear magnetic scale W Axis   Coolant through the spindle 30 bar with filtration unit   Automatic attachment clamping on the ram   PREPARED for ATC   Excellent machine condition - Under power - Immediately available

Turning head, spindle tool, boring tool, boring tool, boring rod type 040.084S0012 Tool holder: SK40 - DIN 69871 Boring rod diameter: 70 mm Machining diameter: 75-120 mm Tool insert: triangle 10.5 mm - Tool on the pictures set to approx. 108 mm Machining depth: max. 200 mm Tool Total length: 300 mm Net weight: 6.5 kg Used, but good condition; used

Universal face and boring head LENZ Type LPA 1S Spindle tool, spindle head similar to WOHLHAUPTER UPA3 Tool holder: SK 40 - M16 Adjustment accuracy: 0.01 mm - Accessories as shown - Storage box Net weight: ca.5 kg good condition; used

INNSE, YOM: Year 1976, retrofitted 2012 Spindle: 200mm Milling spindle: 305mm X: 19800mm Y: 4500mm Z: 1500mm W: 1000mm Table stroke: 3000mm Rotary table: 5000mm Max. loading: 200t

Portable pipe amp; bolt threading machine Pipe threads 1/4–4" = 16–63 mm Bolt threads 14–60 mm = 1/2–2" Also capable of threading plastic covered pipes

Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t

Boring mill turntable, used Boring table, used Typ/ type: TI 2 Manufacturer/ make : UNION Year of construction: 1984 Table size: 1800 x 2000 mm ; > 360° Fahrweg/ way : 1250 mm Feed speed: 0.5 to 1600 mm/min Tischbelastung/ table load: 15000 kp Gesamtlänge/ total length: 3500 mm Gesamtbreite/ total width: 2250 mm Weight/ weight: 7 t Feed motor: 6 kW

CNC Heidenhain TNC 426 with handwheel HR 410 X = 3500 mm Y = 2500 mm Z = 1250 mm W = 800 mm Table dimensions 1800 x 2200 mm Spindle diameter 130 mm Max. spindle speeds 2500 RPM External coolant 2-axis manual milling head TOS HUR 50 year 2004 almost unused.

spindle diameter: 180 mm x-travel: 5000 mm y-travel: 3000 mm bore spindle stroke: 1000 mm ram stroke: 1000 mm dimension of the ram: 425 x 425 mm spindle taper ISO: 50 spindle turning speed - stepless: 3 - 1600 U/min feed stepless: 0 - 10000 mm/min table surface area: 3500 x 2500 mm table rotating: 360 ° table load: 50 t power capacity: 90 kW rapid traverse: 10 m/min table travel: 2500 mm table height: 1450 mm weight of the machine ca.: 125 t dimensions of the machine ca.: 11x12x6,3 m + completely electrically overhauled with new motors in 2012 and equipped with a new control Heidenhain iTNC 530! + NC-turn table 3500 x 2500 mm - 50 to cap. + ATC 60-fold + Cooling unit + chip conveyor + angle clamping plate 2400x1700x1200 mm + mecahincally and electrically in top condition! + The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 ( TGL32680 ) Dimensions: 210 x 100 x 85 mm

Face and boring head NAREX Vhu 80 ( Vhu80 ) Mounting: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm

Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 MK4 im Holzkasten New ! Dimensions: 280 x 240 x 105 mm

Face and boring head WMW C 100 - 40 TGL 32680 Mounting: SK40 Rotary chisel: Ø 20 mm used, tested ! Dimensions: 190 x 100 x 83 mm

Face and boring head WMW B71 TGL 2607.1 mount (machine side): SK40 with insert mount used, tested ! Dimensions (face and boring head): 216 x 65 x 70 mm

Fine boring head, boring head, fine turning tool WALTER B2110M B2110M.0.25.73.029.01 Cutting edge diameter: 22 - 29 mm Total length: 80 mm New ! Dimensions ( fine boring head ): 80 x 25 x 25 mm Dimensions ( transport box ): 88 x 35 x 35 mm

Facing and boring head PAGUS MK4 holder (machine side): MK4 with internal thread M14 x 2.0 Depth: 30 mm holder ( turning chisel ): 8 x 8 mm / 2x Ø 10 mm used, tested ! Dimensions: 202 x 57 x 55 mm

Face and boring head, with impact cutter PAGUS MK4 holder (machine side): MK4 with internal thread M16 x 2.0 Depth: 30 mm receptacle ( turning chisel ): 8 x 8 mm used, tested ! Dimensions: 285 x 95 x 110 mm

Specifications: X-axis 2,750 mm Y-axis 2,500 mm Z-axis 2,320 mm W-axis 700 mm Spindle power 50 kW Spindle diameter 130 mm Spindle speed 1.6 – 1,600 rpm. Tool holder SK 50 Control: CNC HEIDENHAIN TNC426 Table dimensions 2,000 x 1,800 mm max. table load 8 tons B-axis 360 A° Weight approx. 37,000 kg

Technical data of used Schiess Froriep Boring Machine: CNC: Siemens 840 D Maximum transversal travel X axis: 13.770 mm Maximum vertical travel Y axis: 5.000 mm Z axis: 1.780 mm W axis: 950 mm V axis rotating support plane: 2.000 mm Rotating table dimensions: 5.000 x 3.500 mm Fixed table dimensions: 7.500 x 4.300 mm Maximum permissible load on the table: 120 ton Spindle power: 100 kW Spindle revolutions per minute: 710 rpm

Key data: 130 mm, 4000 mm, 2500 mm

TOSHIBA BP-130R22 Year 2007 SPINDLE DIAMETER 5.12" (130mm) TAPER IN SPINDLE #50 VERTICAL TRAVEL, Y-AXIS 100" (2500mm) CROSS TRAVEL, X-AXIS 160" (4000mm) SPINDLE TRAVEL, Z-AXIS 28" COLUMN TRAVEL, W-AXIS 60" TABLE SIZE (BUILT IN B-AXIS) 86.6" X 70.8" TABLE LOAD CAPACITY 44,000 LBS TABLE INDEXING B-AXIS 0.001 DEGREE SPINDLE SPEEDS (3-RANGES) 5-2500 RPM EQUIPPED WITH: TOSNUC 888 CNC CONTROL 60-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT CHIP & SPLASH ENCLOSURE CHIP CONVEYOR 40/30 HP SPINDLE MOTOR NOTES: INSPECT IN PLANT UNDER POWER

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently

Ref. -No.: 10354 Manufacturer: UNION Year of construction: 1998 Retrofit: 2000 Type of control: Digitale Steuerung 2D Control: HAIDENHAIN TNC 135 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 1600 mm Y-Travel: 1250 mm Z-Travel: 1475 mm Spindle stroke: 710 mm Table Dimensions (Lengthxwidth): 1250x1400 mm Spindle Speed: 1600 RPM Drive Capacity - Spindle Motor: 30 kW Total Power Requirement: 35 kW

Ref. -No.: 10353 Manufacturer: UNION Year of construction: 1986 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland X-Travel: 1600 mm Y-Travel: 1000 mm Z-Travel: 1200 mm W-Axis: 710 mm Spindle Taper: SK 40 Table Load: 2500 kg Max. Size Of Workpiece Lxwxh: Höhe 1400 mm Spindle Speed: 1600 RPM Rapid Traverse: 3,15 m / min Total Power Requirement: 23 kW Weight Of The Machine Ca.: 10,3 t

Ref. -No.: 10022 Manufacturer: UNION Year of construction: 2001 Type of control: CNC Control: Heidenhain-Steuerung TNC 310 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 2000 mm Machine length: 6950 mm Machine width: 4685 mm Machine Height: 3885 mm Table Height: 1050 mm Spindle Diameter: 110 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1400 x 1600 mm Faceplate speed: 5,6 - 224 RPM Spindle Speed: 5,6 - 1120 RPM Metric thread feeds: 1,25 - 56 mm Drive Capacity - Spindle Motor: 40 kW Weight Of The Machine Ca.: 25 t Bore Depth: W 800 mm Further information: with facing slide 13 inch thread feeds 1 1/8 - 28 Gg / 1 “ YOM: 1990/ Retrofit: 2001

1 x CNC table boring mill Wotan Rapid 1 Year of manufacture: overhauled / with new control system 2012 X- 2000mm Y-1600mm Z- 600mm W-1000mm B- 360 degrees Table clamping surface : 1250 x1600mm Table load: 6000 kg Spindle speed : 1600 rpm Control: Heidenhain it 530 Controlled axes 5

1 x CNC table boring mill Wotan Rapid 1 Year of construction: overhauled / with new control system 2008 X- 2000mm Y-1600mm Z- 600mm W-1000mm B- 360 degrees Table clamping surface : 1250 x1600mm Table load: 6000 kg Spindle speed : 1600 rpm Control: Heidenhain it 530 Controlled axes 5

CNC table drill TOS WHN 13 with quill Built in 1991 Control FAGOR 8055 Travel xyzw 3500/1850/1330/600 mm Table size 1800 x1800 mm. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

CNC travelling column drilling-milling machine manufacturer FPT model Pragma M40 with control Fidia C20 with plate field 5000 x 2000 mm. Travel xyz 4000x2000x1200 mm. 2 pieces of universal heads BT50 / HSK63 both automatically swivel 2.5°. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool -Quantity: 2x spindle tools -Intake: SK50 -Spindle dimensions: 145-230/225-310 mm -Price: complete -Weight: 14 kg/pc

Boring head, spindle head, boring head, grooving head, grooving head, spindle boring head, boring head, spindle tool, facing and boring head -Boring head: Recording MK5 3 pieces -Tool holder: 8x8 mm / 35x12 mm / 12x12 mm see photos -Transport dimension.: 530/160/H45 mm -Total weight: 10.7 kg

Boring head, spindle head, boring head, grooving head, grooving head, spindle boring head, boring head, spindle tool, facing and boring head -Manufacturer.Schmid, facing and boring head type UBS GR.1 -Intake: MK4 -Dimension.: 222/87/80 mm -Weight: 3.1kg

Horizontal boring mill WHO11NC

HBM WD 130, new in 1969, repairs 1998

spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 850 mm main drive motor: 45 kW table surface area: 1250x1600 mm Control: Heidenhain type: TNC 426 workpiece weight: 12500 kg : 720 radial face slide travel: 240 mm total power requirement: 90 kW weight of the machine ca.: 26,3 t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: . mm x-travel: 2500 mm y-travel: . mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1250 mm w-axis: 800 mm b-axis: 360 ° output: 85 KVA table-size: 1800x1800 mm table load: 12 t spindle taper ISO: 50 table rotation: 360x0,0001 ° spindle motor: 37 kW spindle turning speed range: 1500 U/min feed range: 4-8000 mm/min electrics - voltage/frequency: 400 / 50 V/Hz weight of the machine ca.: 35 t dimensions of the machine ca.: 7x7x6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I offer those interested a used rotary table from the HP100 horizontal boring machine. The size of the table is 2200x2200 mm, weight 14,000 kg, rotation on a ruler + optically adjustable by 90°, linear measurement in the direction of table movement. Load capacity over 4,000 kg. Motor/manually controlled feed and rotation. Sliding guide in condition according to the photo. Fully functional. We are replacing it with a table with a rotary sensor. Available immediately. (it will be connected until 12/10/2022 and can be demonstrated)

The 1550 vertical lathe is a heavy vertical lathe that can be used to turn large parts. The machine was supplied to enterprises of the heavy, energy and nuclear industries, enterprises of the oil and gas industry, and was also exported. The 1550 lathe has proven itself to be reliable and unpretentious, not requiring special attention. The largest diameter of the installed product - 5000mm The greatest height of the installed product - 3200mm Faceplate diameter 5000mm The maximum weight of the processed product is 50t. H=8315mm H=12900mm L=7500mm Carousel machine model KU-281 Electric motors П112N125kw n=330-1000-2200rpm PNF45 N=6.5 kW; n=14-2800rpm AOS2-51-4 N=8.7 kW n=1335 rpm AOS2-61-4 N=14.5 kW n=1350 rpm AO2-31-4 N=2.2 kW n=14200 rpm AOS2-21-4 N=13kW n=1300 rpm AO2-22-2 N=2.2 kW n=2850 rpm AO62-4 N=10kw n=1400 rpm And also Angle head for machine KU-281 for dr ...

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2050 mm z-travel: 1050 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 850 mm main drive motor: 45 kW table surface area: 1600x2000 mm Control: Heidenhain type: TNC 426 workpiece weight: 12500 kg : 720 mm radial face slide travel: 240 mm : total power requirement: 90 kW weight of the machine ca.: 31,1 t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain TNC 407 Year 1996 Workpiece weight 2200 kg X=1250mm Y=1125mm Z=950mm Machine can be checked under power

TOS W 75

BFT 90/3 SPINDEL 102 , ISO

Shipping within Germany 8 ,- insured