injection pet used for sale

B&A REF:  9307 TON: 1100 SCREW DIAMETER:  105MM SHOT WEIGHT: 3075 STROKE VOLUME:  3380CM3 INJECTION PRESSURE: 1600AR PLATEN SIZES:  1850 X 1810MM DBTB: 1400 X 1150MM MIN MOULD HEIGHT:  600MM MAX MOULD HEIGHT: 1200MM MOULD OPENING STROKE:  1800MM MAX DAYLIGHT:  2400MM EJECTOR STROKE:  300MM CONTROLS: CC 200 TOUCH CORE PULLING: 4 AIR VALVES: 2 MOTOR: 75 HEATING CAPACITY: 72KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9302 TON: 270 SCREW DIAMETER:  55MM SHOT WEIGHT: 594 STROKE VOLUME:  653CM3 INJECTION PRESSURE:  2041AR PLATEN SIZES: 940 X 940MM DBTB: 630 X 630MM MIN MOULD HEIGHT:  250MM MAX MOULD HEIGHT: 650MM MOULD OPENING STROKE:  600MM MAX DAYLIGHT:  1250MM EJECTOR STROKE:  200MM CONTROLS: UNILOG B4 CORE PULLING: 2 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY:  18.2KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9311 TON: 260 SCREW DIAMETER:  55MM SHOT WEIGHT: 605 STROKE VOLUME:  642CM3 INJECTION PRESSURE:  1460AR PLATEN SIZES:  960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1400MM EJECTOR STROKE:  225MM CONTROLS:  CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22  HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:  HYDRAULIC

B&A REF:  9314 TON: 420 SCREW DIAMETER:  70MM SHOT WEIGHT:  1090 STROKE VOLUME:  1212CM3 INJECTION PRESSURE:  1877AR PLATEN SIZES:  1200 X 1100MM DBTB: 810 X 710MM MIN MOULD HEIGHT:  380MM MAX MOULD HEIGHT: 820MM MOULD OPENING STROKE:  710MM MAX DAYLIGHT:  1530MM EJECTOR STROKE:  230MM CONTROLS:  NC4 CORE PULLING: 2 AIR VALVES: 3 MOTOR: 45 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE:   HYDRAULIC

Sandretto Nove HP 100 Injection Moulding Machine + Chiller & Hoist Overview Excellent opportunity to acquire a complete plastic injection moulding cell. This lot features the reliable Sandretto Nove HP 100 industrial injection moulding machine, capable of processing a wide variety of polymers (PP, PE, ABS, PS, PA, PC). To provide a complete turnkey solution for your manufacturing floor, the sale also includes the original Sandretto Nove chiller (cooling unit) and a Sandretto Otto 150 hoist. Clamping Unit Specifications Clamping Force: ~100 Tons (≈ 980 kN) Tie-Bar Clearance: ~410 mm (16.14") Maximum Mould Opening: ~460 mm Minimum Mould Thickness: ~100 mm Clamping Type: Hydraulic 4-tie-bar system Injection Unit Specifications Screw Diameter: Variable (approx. 30–45 mm depending on version) L/D Ratio: ~18:1 to 22:1 Injection Pressure: Up to ~1500–2000 ...

Injection moulding machine ARBURG 820 S 4000-2100 with Multilift Select (2016)

Injection moulding machine ENGEL/ FERROMATIK, vacuum pumps, controls, cables, fittings, volume without shelves, room area approx. 30 m²

Screw diameter: 120 mm Injectable volume / Shot volume: 6785 cm3 Injectable weight / Shot weight: 6100 g Injection pressure: 1620 bar Column passage / Bettween tie bar: 1120 x 1000 mm Mold Thickness /Tickness tie bar: 500-1200 mm Opening stroke: 1200 mm Ejection stroke: 400 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 110 mm Injectable volume / Shot volume: 5160 cm3 Injectable weight / Shot weight: 4700 g Injection pressure: 1620 bar Passage between columns / Bettween tie bar: 950 x 1100 mm Mold Thickness /Tickness tie bar: 400-1100 mm Opening stroke: 1080 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

Injection moulding machine ENGEL Duo 2550/500 built in 2014, S/N 199222, clamping force 500 t, displacement max. 1,155 cm³, screw 80 mm, clamping plates 1,200 x 1,200 mm, opening travel max. 750 mm, weight 14,000 kg, control Engel CC200, cascade control, 20 registers, linear robot Engel Viper 20, device no. 199229, built in 2014, machine 153, with suction conveyor PIOVAN T20M, conveyor belt 3,000x800 mm

Injection moulding machine FERROMATIK MILACRON EUROPE EE155 Year 2007 83,562 Bh (19.03.25, 25.03.26), Masch.-Nr. 427088, clamping force 1,550 kN, international size 1550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, CNC control Mosaic, internal FERRO2, not yet connected after purchase

Injection moulding machine FERROMATIK MILACRON EUROPE Elektra EE 155 Evolution Year 2007 65,542 Bh (19.03.25, 25.03.26), Masch.-Nr. 427099, clamping force 1,550 kN, international size 1550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, machine 7.4 t, internal FERRO1, CNC control MOSAIK, not yet connected after purchase

Injection moulding machine/ card removal system FERROMATIK MILACRON EE155 built in 2007, S/N 427087, clamping force 1,550 kN, international size 1,550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, control Mosaic, touch panel SIEMENS Simatic, machine no. 163

Injection moulding machine/ card removal system FERROMATIK MILACRON EE155 built in 2007, machine no. 427100, clamping force 1,550 kN, international size 1,550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, CNC control, touch panel SIEMENS Simatic, w. 036/2007, Masch.-Nr. 162

Key data: 14000 kN

The machine was fitted with new seals for the spars in 2025. Delivery by pick-up only

Plastic injection moulding machine DEMAG Extra 160-430 built in 2005 66,081 Bh (02/24), international size 1600-430, clamping force 1,600 kN, displacement max. 231 cm³, screw 40 mm, clamping plates 770 x 770 mm, opening travel max. 585/685 mm, weight 6,320 kg, control Demag NC4, cascade control, 8 registers, linear robot Demag DR721-65952400, device no. W721-0302, Travel X/Y/Z - 550/1,200/2,000 mm, tie bar width 520, injection unit 430, series 4.1, mesh no. 7896-1098, weight 6.5 t, S/N 200034, internal machine 107, plus suction conveyor PIOVAN, 2 belt conveyor belts MTF 3,000x600 mm, plus 1 more

This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details.

Key data: 16000 kN

The machine is still energized and functional. Delivery by pick-up only. The offer is only valid for a short time

This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details.

This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details.

Key data: 16000 , 8825 , 140

Presse à injecter HAITIAN 1600 T type MARS MA 16000/15800 Force de fermeture : 16 000 KN Année : 2011 Course d’ouverture moule : 1600 mm Epaisseur moule min / max : 700 / 1500 mm Course d’ouverture max des plateaux. : 3100 mm Distance entre colonnes : 1550 x 1430 mm Dimensions des plateaux : 2230 x 2120 mm Course d’éjection : 400 mm Force d’éjection : 318 KN Diamètre vis : 150 mm Volume théorique d'injection: 11 133 cm3 Poids de l’injection en PS : 10 131 gr Rapport L/D : 20,8 Pression d’injection max. : 149 MPA Capacité de plastification : 220 gr/sec Vitesse d’injection : 1527 gr/sec Vitesse rotation vis : 102 tour/min Puissance chauffe. : 122 KW Puissance moteur électrique: 65 + 65 + 45 Quantité d’huile dans réservoir : 1610 litres Dimensions : 15,2 x 4,5 x 4,5 m Poids total : 107 T

This Husky HL225 RS65 was manufactured in 2011. It features a clamping force of 225 tons and a screw diameter of 60 mm, optimized for high-speed PET preform production. The machine includes a platen size of 750 x 750 mm and an opening stroke of 500 – 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky HL225 RS65 electrical injection moulding machine we have for sale. Contact us for further details.

This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 14 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details.

For sale here is a distributor injection pump from MAN / Bosch. It is for the MAN 12 cylinder diesel engine. MAN part number: 51.11103-7752. See nameplate. For more data, please refer to the pictures. The pump is as good as new. Ask for price if interested. Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, with the exception  ...

This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.

Key data: 3800 , 1296 , 70

Presse à injecter HAITIAN 380T type MARS MA 3800 / 2950 Force de fermeture : 3 800 KN Année : 2012 Course d’ouverture moule : 700 mm Epaisseur moule min / max : 280/730 mm Distance entre colonnes : 730 x 730 mm Diamètre vis : 70 mm Volume théorique d'injection: 1 424 cm3 Poids de l’injection en PS : 1 296 gr Rapport L/D : 22,9 Pression d’injection max. : 2070 bars Capacité de plastification : 64,70 gr/sec Vitesse d’injection : 381 gr/sec Quantité d’huile dans réservoir : 690 litres Dimensions : 7,50 x 1,80 x 2,35 m Poids total : 17 T

Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details.

Key data: 468 kN, 2043 g/PS, 83 mm

- Top condition - Used for only one tool, no conversions - 2 Core moves - 8-way hot runner regulator - Nitrided high-strength screw -

This 3-axis Arburg 820 S 4000-2100 hydraulic injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a platen size of 1171 x 1171 mm, and a maximum mould installation height of 850 mm. With a screw diameter of 70 mm and an injection unit of 2100, this machine is well-equipped for high-quality moulding capabilities. Consider the opportunity to buy this Arburg 820 S 4000-2100 hydraulic injection moulding machine. Contact us for further details.

Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It includes a hydraulic mechanical 2 platen clamping system and a robust motor current of 261 A. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1300-12000 MC machine we have for sale. Contact us for further details.

This 3-axis DEMAG Erdotech 500-3300 hydraulic injection moulding machine was manufactured in 2005. It features a screw diameter of 70 mm and a shot weight of 1,230 g. The machine has a maximum daylight of 1,450 mm and includes a handling system with a Wittmann linear robot. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Erdotech 500-3300 machine we have for sale. Contact us for further details.

This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details.

This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2011. This ITALTECH KS 1200 8300 ES features a screw diameter of 130 mm and a clamping force of 11,772 kN. It has a shot volume of 8630 cm³ and a maximum injection pressure of 1460 bar. If you are looking to get high-quality injection moulding capabilities, consider the ITALTECH KS 1200 8300 ES machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2000. This Netstal Synergy 1500-460 features a clamping force of 1500 kN and an injection force of 279 kN. It offers an opening stroke of 0–450 mm and a mould height range of 400–700 mm. If you are looking to get high-quality moulding capabilities, consider the Netstal Synergy 1500-460 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2016. This Netstal Synergy 600-230 features a clamping force of 600 kN and an injection force of 182 kN. It has an operating pressure of 210 bar and an opening stroke of 0-350 mm. If you are looking to get high-quality injection moulding capabilities, consider the Netstal Synergy 600-230 machine we have for sale. Contact us for further details regarding this machine.

Key data: 3500 kN, 519 g/PS, 55 mm

1.0 pcs. Injection moulding machine Manufacturer: KRAUSS MAFFEI Type: KM350-2000CX Year of Make: 2008 Clamping force: 300 tons Spar spacing 710 x 7100 mm Screws DN: 55 mm Max. displacement: 570 cm³ Moulded part weight: 519 g/hp Control: MC5 Equipment: 2 pcs core train Robot Manufacturer: SEPRO 45-fold hot zone channel control Interface temperature control unit Approx. 67,530 operating hours

Control Type: Selogica Closing System: Hydraulic TECHNICAL DATA Closing Force: 600 kN Clearance between Tie Bars: 370 mm x 370 mm Platelet Dimensions: 570 mm x 570 mm Mold Size: Min 250 mm Maximum Opening Stroke: 500 mm Maximum Distance Between Platens: 750 mm Screw Diameter: 40 mm Shot Volume / Shot Weight: 188 ccm / 172 grams PS Injection Pressure: 1390 bar GENERAL DATA Motor: 15 kW Heaters: 5.5 kW Operating Hours: To be verified EQUIPMENT Language: German Hydraulic core: x1 Service book: Yes Auction-ID: A7-45917-1

Manufacturer: Engel Model: Victory 330H/80L/110 Year of Manufacture: 2008 Type of Machine : Injection Molding Machine.Combi machine for 2-component injection molding (main cylinder is Ø 18mm thermoplastic and L-unit is a Ø 12mm LSR cylinder) Operating hours: 35995h Find more here - / Contact us at -

Control Type: Selogica Closing System: Hydraulic TECHNICAL DATA Closing Force: 1500 kN Clearance between Tie Bars: 470 mm x 470 mm Platelet Dimensions: 650 mm x 650 mm Mold Size: Min 250 mm Maximum Opening Stroke: 500 mm Maximum Distance Between Platens: 750 mm Screw Diameter: 45 mm Shot Volume / Shot Weight: 230 ccm / 210 grams PS Injection Pressure: 1670 bar GENERAL DATA Motor: 37 kW Heaters: 10.2 kW Operating Hours: To be verified EQUIPMENT Language: German Hydraulic core: x1 Air valve: Yes Service booklet: Yes Additional equipment: Robot access Auction-ID: A7-45917-3

Control Type: MC 4 Closing System: Hydraulic TECHNICAL DATA Closing Force: 1100 kN Clearance between Tie Bars: 470 mm x 470 mm Platelet Dimensions: 745 mm x 770 mm Mold Size: Min 300 mm Maximum Opening Stroke: 600 mm Maximum Distance Between Platens: 900 mm Screw Diameter: 40 mm Shot Volume / Shot Weight: 217 ccm / 198 grams PS Injection Pressure: 2377 bar GENERAL DATA Motor: 18.5 kW Heaters: 13 kW Operating Hours: To be verified EQUIPMENT Language: German Hydraulic core: x1 Air valve: Yes Service booklet: Yes Additional equipment: Robot input, Battery (nitrogen cylinder) Auction-ID: A7-45917-5

Control type: Unilog B4 Closing system: Knob TECHNICAL DATA Closing force: 50 kN Maximum mold size: 196 mm x 156 mm Plate dimensions: 196 mm x 364 mm Mold size: min. 100 mm Maximum opening stroke: 200 mm Maximum plate spacing: 300 mm Screw diameter: 14 mm Injection volume / Shot weight: 1.1 ccm / 1 gram PS Injection pressure: 2500 bar GENERAL DATA Motor: 2 kW EQUIPMENT Language: German Hydraulic core: - Air valve: x1 Service booklet: Yes Additional equipment: See below Additional equipment:  Rotary table,  Robot integrated with the machine,  Fully electric injection molding machine,  Quality monitoring module,  Cleanroom module,  Mold pressure control,  Quiet machine operation,  Additional 14 mm screw Auction-ID: A7-45917-4

Control Type: Selogica Closing System: Hydraulic TECHNICAL DATA Closing Force: 1500 kN Clearance between Tie Bars: 470 mm x 470 mm Platelet Dimensions: 650 mm x 650 mm Mold Size: Min 250 mm Maximum Opening Stroke: 500 mm Maximum Distance Between Platens: 750 mm Screw Diameter: 45 mm Shot Volume / Shot Weight: 230 ccm / 210 grams PS Injection Pressure: 1670 bar GENERAL DATA Motor: 37 kW Heaters: 10.2 kW Operating Hours: To be verified EQUIPMENT Language: German Hydraulic core: x1 Air valve: Yes Service booklet: Yes Additional equipment: Robot access Auction-ID: A7-45917-2

Towards the middle of the year, two machines are available: Arburg 470H 1000 400 BJ 2010 Arburg 720S 3200 3200; Year of manufacture 2015 The operating hours can be found in the pictures attached, the condition of the 720 S is very good, it has only about 28,000 Bh The 470H is functional so far, but has a cable break/connection problem between the control cabinet and the AMK drive of the plate movement. Here comes sporadically an error message, which is only fixed by turning the drive motor. If you need more information, please get in touch.