injection moulding machine used for sale

Description Item # 9231 - CROISSANT/ CAKE INJECTION FILLING MACHINE Manufactured by GORRERI Model SVG800 - 800mm working width For fillings such as: creams, jams, fruit jelly Two sets of needles : for big croissants/cakes: for mini croissants/cakes Year 2007 (used in production for 2 1/2 years and then held as a back-up machine) Production capacity: 20 cycles/min Weight: 750 kg Power: 7.5 kW Feeding tension: 380 V (3Ph+T+N) Auxiliary tension: 24 V DC Frequency: 50 Hz Working pressure: 6 bar

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

New injection pump 0402 066 725(=PES6P110A120RS3336-1) NET 2.950,-EURO 6 x new injectors 0432 191 342 (Cummins # 408931500) net / piece 215,-EURO Mail: info@miw-zeven

APV COMBI UHT TREATMENT STERILIZATION PASTEURIZATION PLANT – 2006 Includes both TUBULAR and INJECTION systems. Capacity 4.000 - 8.000 Lt /h DISASSEMBLED AND READY FOR LOADING - APV PLATE HEAT EXCHANGER for cooling - APV TUBULAR ( INDIRECT ) UHT Treatment system. - APV INJECTION ( DIRECT STEAM ) UHT Treatment system. - APV ASEPTIC HOMOGENIZER 250 BAR - OPTIONAL - APV CIP CLEANING UNIT - APV VALVE CLUSTER FOR ASEPTIC TANK - (TANK IS EXCLUDED) - ELECTRIC CONTROL PANELS Fast heating (~300°C/sec) for optimal taste and minimal degradation Instantaneous flash cooling for flavor and aroma preservation Uniform heating via indirect tubular exchangers for gentle thermal treatment High energy recovery (up to 90%) to reduce utility consumption and cost. Precise thermal control with uniform product treatment Efficient spore kill with very low C ...

complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition

Used Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Condition: As Is Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Model: DYNABLOW DB 30 Speed: 3.000 Bph Number of cavities: 3 Type: Linear Compressor NOT included Chiller NOT included Safety protections Code: W 90 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Condition: As Is Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Speed: 16.000 bph Model: sbo 16/16 Number of cavities: 16 Preform tipper Preform orienter Safety protections Code: W 77 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel Sbo 6: Year: 2002 Condition: As Is Used Blow Moulding Machine Sidel Sbo 6 Year: 2002 Speed: 10.000 bph Number of cavities: 6 Chiller not included Compressor not included Preform unscrambler Preform elevator Preform tipper Safety protections Code: W 89 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa Sfr 16: Year: 2001 Condition: As Is Used Blow Moulding Machine Sipa Sfr 16 : Year: 2001 Model: sfr 16 Speed: 18.000 bph on 1.5 lt 22.000 bph on 0.5 lt Number of cavities: 16 Preform elevator Preform orientator Safety protections Code: W 79 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa Sf-08004: Year: 1994 Condition: As Is Used Blow Moulding Machine Sipa Sf-08004: Year: 1994 Speed: 4.000 bph Model: sf-08004 Number of cavities: 4 Type: linear Preform tipper Preform hopper Bottle formats: 1.5 lt Safety protections Code: W 86 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Condition: As Is Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Speed: 7.200 bph sul 1.5 l Model: sbo 6/10 serie 1 Number of cavities: 6 Bottle neck format 29/25 mm Preform elevator/orientator Stamp not included Worked hours: 47.000 Safety protections Code: W 84 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa sf 8/4: Year: 1998 Condition: As Is Used Blow Moulding Machine Sipa sf 8/4: Year: 1998. Speed: 4.000 bph. Model: sf 8/4. 4 cavities. Format available: 0.5 lt ? 1.5 lt ? 2.0 lt. Preform loader. Preform tipper. Complete with air recovery system. Safety protections. Code: W 14 More details: https://bottlingscout.com

Bread maker and rolling pin maker Dimensions: 88x88x120 Voltage: 220-400 V Electric power: 0,55 kW Dough weight: 20-1000g

Used Used Sidel PET Blow Moulding Machine (24,000 bph): Year: 2002 Condition: As Is Model: SBO20 ? Series 2 Year: 2002 Speed: 24,000 BPH (Bottles Per Hour) Type: Rotary blow moulder Cavities: 20 cavities Neck: 1881 Included: Preform elevator and orientator Safety protection Code: W 122 More details: https://bottlingscout.com

Used Used Kosme PET Blow Moulding Machine: Year: 2005 Condition: As Is Model: KSB4L Year: 2005 Speed: 6,000 BPH 1L format Type: linear 4 cavities Preform elevator and orientator Bottle neck 29/21 Safety protection Code: W 124 More details: https://bottlingscout.com

Used Used Sidel PET Blow Moulding Machine (24,000 bph): Year: 2002 Condition: As Is Model: SBO20 ? Series 2 Year: 2002 Speed: 24,000 BPH (Bottles Per Hour) Type: Rotary blow moulder Cavities: 20 cavities Neck: 1881 Included: Preform elevator and orientator Safety protection Code: W 123 More details: https://bottlingscout.com

Used Used Krones PET Blow Moulding machine Contiform S8: Year: 2004 Condition: As Is Used Krones PET Blow Moulding machine Contiform S8: Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety Protections Code: W 105 More details: https://bottlingscout.com

Description CHOCOLATE BISCUIT MOULDING LINE Manufactured by CARLE MONTANARI Model Multicavemill 1200 Mould dimensions 1110mm x 285mm. Approximately 1200 moulds on the chain. year 1993 including biscuit infeed conveyor with incline and overhead distribution incorporating 180deg turns Demoulding Station, twist action Mould Change System with product detection Mould Conditioning prior to deposit Model MLR 1200 Chocolate Depositor Shaker/Vibrator Biscuit Depositor / Placing System and Presser Backing Off System and Shaker/vibrator Cooling Chamber The line has a REISDORF ASM-1200 Wide Target Sprinkler for sprinkling ingredients on products Allen Bradley Controls 415volt 3phase 50hz Includes 2 x AASTED AMT-2000 Chocolate Tempering Machines, both from Year 1993, and access platform/gantry Line length 35.2m x 4m high at maximum (depositor section) No moulds are included.

Description Item # 9286 - CHOCOLATE SHELL MOULDING LINE used for filled pralines, eggs, balls, etc Manufactured by BINDLER Model HA/M - 275 year 1994 mould size 275mm x 220mm x 30mm design speed 5 moulds per minute upgraded to 7 per minute +/- single forms 162 moulds double forms halves 238 moulds working height 900mm total length 20m x width 3.1m 1 operator to run the line still installed and in excellent working condition, last run in 2024 process: - one magazine for empty mould removal - one magazine for empty mould loading - 1st mould heater pre-deposit - shell depositor model GKC - GWK Teco CS 140e water heater fitted for fast and continuous hopper and depositor plate heating/ pre-heating - mould turn over device with automatic chocolate recovery hopper - water heater fitted - and recirculation pump (to connect to either temperer or holding tank, not included) - mould vibration - 1s ...

Description Item # 9308 - ONE SHOT CHOCOLATE MOULDING LINE Manufactured by WESTAL 600mms wide Line Year of Manufacture not known (approximately 35 years old) Still set up in the factory, in full working order Up to 500Kgs per hour (around 4000Kgs per 8 hour shift), depending on product Line holds 420 moulds capacity up to about 25 moulds per minute, depending on product Including One Shot Depositor which was only being used for solid bars Could also include some types of inclusions Line with : Mould Warmer, automatic rising up from line when not being used One Shot Depositing head, last being used for solid bars Mould Vibration Mould Cooling, snake style through line Cooling by cold air, cooling fan included, cooling compressor also available if required (on outside of building) Mould Turnover & Mould De-Moulding, with hammer Product Exit Mould Return to start of line Line has had a New  ...

Description Item # 9326 - ONE SHOT CHOCOLATE MOULDING LINE Suitable for Solid, Filled, One Shot & Book Moulded Products Line includes: MESIMERIS METAL CONSTRUCTIONS (Greece) Universal Refiner/Conche, 1500Kgs, Year 2004, LLOVERAS AAC-502 Chocolate Tempering Machine, Year 1998, 500Kgs, with Pump. Motor Screw Shell overhaul in 2022. 300Kgs Stainless Steel Buffer Tank, Double Jacketted with water. AWEMA UDM222 One Shot Depositor, Year 2007, around 10 moulds per minute, up to 1600Kgs per 8 hour shift. Line is all year 2004, and includes: Preheating mould section(A1) with plastic belt, Tower control unit. Pusher for the 90 degrees angle, 5 meters long belt that drives near the head. Here can be added decoration robots (not available) or other equipment. Pusher that brings 2 by 2 the moulds and places to the belt of head. The head of the machine with the control panel (touchscreen or mouse cont ...

200ton Downstroke Moulding Press Manuf.: R+S Technik Platens: 1500 mm deep x 2000 mm wide Daylight 1000 mm Press force 2000kN Tearing force 120kN Operating voltage 3x230/400V, AC, 50Hz Installed power 197kW Max. weight of tool 5000kg Max. pressure of hydraulic 250bar Length of stroke 1670mm Weight: 37000kg Year 2016

This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details.

Ref. no.: 18591 Manufacturer: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this ...

Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general ind ...

Manufacturer: Fu Chun Shin Machinery Model: SD 60004M Year of Manufacture: 2009/ 2015/2016 Type of Machine : Injection Molding Machine Heater Capacity: 46.68 kW Motor Power: 44 kW Pump Pressure:140 kg/cm² Find more here - .ucymachines/ Contact us at - sales@ucymachines

High-performance pneumatic embossing machine Pneumatic embossing machines allow the reproduction of embossing designs on various materials such as leather, plastic, synthetics, non-woven fabrics, flock, and others using pressure and temperature. This can be used for signs, logos, decorations, or lettering. By branding your products, you can strengthen customer loyalty to the guaranteed quality, aesthetics, and durability they associate with a particular brand or logo. The machine is equipped with: - Temperature control - Cycle time control - Belt feed length control - Clamping force control - Manually extendable/retractable table The machine is in perfect, like-new condition.

1) Vertical Rubber Molding Machine Manufacturer: Rutil Model: 2000/250 RS SX-F Stations: 1 Clamping Force: 500 Ton Heating Platens Dimensions: 520x650 mm Max Shot Volume: 2000 cc Max Daylight: 450 mm Minimal Mould Height: 100 mm 2) Vertical Rubber Molding Machine / NEEDS REPAIR - Manufacturer: Rutil - Model: MP3 700/150 - Stations: 3 - Clamping Force: 150 Ton - Heating Platens Dimensions: 420x500 mm - Max Shot Volume: 700 cc - Max Daylight: 400 mm - Minimal Mould Height: 140 mm 3) Vertical Rubber Molding Machine NEEDS REPAIR - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x500 mm - Max Shot Volume: 680 cc - Max Daylight: 400 mm - Minimal Mould Height: 70 mm 4) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x50 ...

Rutil Vertial Injection Moulding Machine Year of manufacture: 2001 Type: Injection Configuration: Vertical Clamping force: 350 tons Injection volume: 2000 cc Upper intermediate frame: Yes Lower intermediate frame: Yes Heater plate dimensions: 600×650 mm Tie bar distance: 600 / 340 mm Additional heating option: Yes Sliding plate: Yes

<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>

SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm  ...

Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg

Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW1 Disc swing motor 0.37kW 1 Screw roller motor 2.2kW 2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg

Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW1 Cross motor 1.5 kW 1 Screw roller motor 2.2 kW 2 Feeding power 2.2 kW Up and down motor 0.37kW4 Swing motor 0.37kW 2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Type R-RP1000 Working width 1000 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller (steel) 190 mm Diameter of second (ruber) 190 mm Abrasive belt size 1020x2000 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1600x2100mm Weight 2200kg

Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW

Type DTW-120A Horizontal three axis Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg

Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg

Type 700 Motor power 4 kW, 1450 aps/min Blade length 5020 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 700 mm Max cutting height 430 mm Table dimentions 790 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Type 800 Motor power 4.5 kW, 1450 rpm Blade length 5611 mm Blade width 19-50 mm Blade speed 18 m/s Throat / max. cutting width 800 mm Max cutting height 470 mm Table dimentions 840 x 500 mm Tilting table 0°- 45° Dust port diameter 2 x 100mm

Length 300/600 mm Width 72 mm Roughness P240/P320 Holder 4,5 mm Price 0,87 Eur/1 pcs. (300) (EXW Jonava, Lithuania) Price 1,74 Eur/1 pcs. (600) (EXW Jonava, Lithuania)