hydro used for sale

Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydropneumatic pillow kg 31 400

TECHNICAL SPECIFICATIONS Manufacturer: GfA Designation: Aquamator / Hydrobandscheider Type: AK 3,5/1600/300 Year of construction: 1979 Feed solids: 60 - 100 t/h Water requirement: < 120 m³/h Drive power: 3 - 4 kW Axle distance: 3,500 mm Belt width: 1,600 mm

Nominal effort: 630 tons Course stroke: 420 mm Number of strokes in a minute: 20 Bolster plate-to-ram adjustable stroke: 180 mm Max. distance plate-to-ram (in lower position of slider): 750 mm Slider dimensions 1000x1000 mm Table size: 1250x1250 mm Dimensions of the hole in the table 800x800mm Thickness of the sub-stamp plate 180 mm Height above floor level 600 mm Main motor power: 56 kW hydropneumatic pillow in the table Press overall dimensions: -Length: 3280 mm -Width: 3470 mm -Height: 6190 mm Press weight: 52650 kg

Net price: 14.500,- € gross price: €17,255 - - - - - MAN emergency generator set 300kVA in 20 ft. Container - - - - - Engine: - Manufacturer: MAN - Model: D2542 MTE - 12 cylinders -Turbo -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: CAT / Olympian - 300 kVA - 230 / 400 volts - 50 Hertz - - - - - Start unit / control panel: - Ignition lock for starting - Oil pressure indicator - Water temperature display - Generator monitoring: volts, amps, hertz, hydrocarbons - - - - - Condition: -Used - A test run was made - The engine starts well - The generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - MAN generator set 300 kVA - with soundproofed 20 ft. Container - with starter unit -Switchboard - large exhaust / silencer - - - - - Transport: - A Germany-wide transport is possible  ...

CPTronic, Alcolor with Technotrans and cooling HydroStar compact, HD-Registerpunch 425, manual platebender, Coardboard-guides for Transferdrum II, Pull-lay-control electr, All wash-ups.

SPEED: 13000 SHEETS/H, NON-STOP, PRE-LOADING-DEVICE, VOICE-SPEAKERS, DOUBLESHEETCONTROL- INDUKTIV, ALCOLOR-V, HYDROSTAR, CANOPEN, DRYSTAR COMBINATION, AIRCOOLED, POWDERSTAR AP-262, DRYSTAR COMBINATION, COMBINATIO UV, PRINECT AXIS CONTROL, DOCTOR-BLADE, A

Nitrogen Furnace nitrogen furnace Pit furnace, top condition. 50kW ele Max T. 950°C Anealing in hydrogen, nitrogen atmospere Batch size 800x1000mm run only for tests and start of production similar possible furnace REY, Naberther, CFI, SAIREM, SOLO, ALD, ECM, BMI, CERIC WISTRA, ELTI, ECM, NAGAT SAT, SAFED, SERTHEL, SLFI, MORGAN, OTTO JUNKER, CIEFFE Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammh ...

Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 manual controls Pneumatic material clamps Minimum quantity spraying device Table can be rotated on both sides with locking points at 45° Roller conveyor and stops on request

Vertical 3-axis CNC machining center with nano precision Kern Pyramid Nano Year of construction: 2013 Heidenhain iTNC 530 Table size: 600 x 600 mm Table load: max. 250 kg Longitudinal travel: X 500 mm Transverse travel: Y 500 mm Vertical travel: Z 400 mm Smallest travel increment: 0.1 μm Feeds up to: X/Y/Z 30,000 mm/min. Rapid traverses up to: X/Y/Z 30,000 mm/min. Acceleration: X/Y/Z 10 m/s² Vector-controlled milling spindle: Spindle mount: HSK-25 Spindle drive power: 6.4 kW AC Spindle speeds: 500 - 50,000 rpm. Spindle torque (S1): max. 1.6 Nm Automatic tool changer: Tool magazine positions: 32-fold Tool holder: HSK-E25 Tool Ø (every second place free): max. 60 mm Tool length: max. 160 mm Tool change time: 3 sec. Chip-to-chip time: 6 sec. Machine weight: approx. 8,000 kg Machine height: LxWxH 2,850 x 3 ...

turning diameter: max. 320 mm turning length: 810 mm control: MSX 701 MAPPS III standard turning dia.: 200 mm Main spindle:: Number of revolutions: max. 6.000 min/-1 power capacity - main spindel: 22 / 18,5 kW Bar feed: max. 52 mm spindle bore: 61 mm C-Axis: 0,001 ° Subspindel:: Number of revolutions: max. 6.000 min/-1 power capacity - Sub spindle: 22 / 18,5 kW Bar feed: max. 52 mm spindle bore: 61 mm C-Axis: 0,001 ° Turret 1 + 3:: number of toolpositions: je 16 pos. Number of driven toolspositions: je 16 pos. Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 7,5 / 5,5 kW Y - Axis: 110 (+65 / -45) mm Turret 2:: number of toolpositions: 16 pos. Number of driven toolspositions: 16 pos. Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 7,5 / 5,5 kW Y - Axis: 110 (+45 / -65) mm axis stroke:: x-travel: 1-3: 210 mm y-travel: 1-3: ...

: neu : 2023 : 9691 : Mai 2023, Zwischenverkauf : Türkei : 29670 € : 85 mm : 247 mm : 3 : 7.5 kW : 80x20 mm / 500 mm, 30x10 : 120x30 mm / 650 mm, 50x10 : 50x50 mm / 500 mm, 30x30 : Ø 50 mm / 500 mm, Ø 20 mm : Ø 100x2,5 mm / 1.300 mm, : 80x40x4 mm : 70x70x4 mm : 80x8 mm / 1.200 mm, 30x3 : 80x8 mm / 800 mm, 30x3 mm : 1580 mm : 1200 mm : 1410 mm : 2350 kg 3 driven rolls (hydromotor and planetary gear) strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions plane rolls lateral rolls (forward-backward hydraulic, rest manual) horizontal and vertical operation Control console forfor- andbackward drive machine and equipment according to theCE regulations INCL. OPTION: CONTINUOUS SPEED WE HAVE MORE THAN 235 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mario Carnaghi CNC Vertical Boring Mill FEATURES: Siemens 840DE SL CNC Control 12-Position Automatic Tool & Attachment Changer 40-Station Automatic Tool Magazine Hydrostatic Table Vertical Ram with Milling Spindle Vertical Milling & Drilling Attachment Right Angle Milling Attachment Universal Milling Attachment Through Spindle Coolant & Flood Coolant Dual Dive 108 HP (81 KW) Table Motors High Resolution Heidenhain Scales & Encoder Renishaw RMP 60 Probe Renishaw NC-4 Milling Tool Probe Full Machine & Operator Enclosure Chip Conveyor CAPACITY: Table Diameter 196.85" (5000mm) Turning Diameter .. 236.22" (6000mm) Maximum Turning Height 98.42" (2500mm) Maximum Stroke of Vertical Rams ... 59.05" (1500mm) Ram Cross Section . 13.77" x 13.77" (350x350mm) Cross Rail Travel . 47.24" (1200mm) Ram Saddle Travel, X-Axis . 175" (4445mm) Turning Tool .. Capto C8  ...

Capacity approx.: 310 hl, Operating pressure: 3 bar, Operating temperature: 50 °C, Weight: 4500 kg, Material: stainless steel, Position: vertical, Base construction: 4 x height-adjustable feet, Features: Cooling: cone and side wall; insulation; hydrostatic pressure sensor Deltapilot M (E+H); sampling valve; 3 x PT 100, swivel cone

faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2645 mm control: Siemens 840 D cross rail adjustment - vertical: 1500 mm max. ram stroke: 2000 mm ram head dimension: 300 x 300 mm faceplate turning speed range: 0,4 - 95 U/min main drive: 2 x 80 kW faceplate load max.: 80.000 kg Equipment / Accessories: - C-axis driven tools HSK 100, 37 kW, 3000 rpm - hydrostatic guides of the linear axes - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement - tool and process monitoring ARTIS CTM system - workspace visualisation via video camera on the support - tool magazine (arranged on the floor) for turning and milling tools as well as storage for milling heads - work area protection completely closed with automatic covering of the chip chutes - coolant system with filter system, chip conveyor - various tool holders - documentation The data for this ad was created ...

grinding diameter: 1000 mm grinding length: 4000 mm swing diameter: mm clamping length max.: 4000 mm grinding spindle speed: 400 - 1200 U/min grinding wheel peripheral speeds:: 45 m/s grinding motor: 22 kW grinding wheel size: 710 x 100 x 304,8 mm faceplate turning speed range -stepless-: 3 - 70 U/min drive capacity - workpiece: 4 kW feed range - grinding spindle: 0,01 - 6000 mm/min workpiece weight: 10 t Control: Fanuc 31i- B table (Z-axis): 4100 mm x-axis: 460 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - CNC control Fanuc 31i - B - tailstock MT6 - Steady rest dia 100- 610mm - Hydrostatic spindle guide - Crowning +/- 5mm - Coolant tank & paper filter - Magnetic separater - Measuring system. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 44300 € : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 750 mm : 910x750 mm : rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm : 0.12 kW : 4 kW : 4020 mm : 1600 mm : 2450 mm : 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Traub TNA 300 Y, Year of construction 1998, Control TX8H, X/Z/Y travel 210/450/ +/- 35 mm, Y axis, C axis, Angetr. Tools 1 turret mount VDI 30, Hollow clamping cylinder 65 mm, Hainbuch BZI 65, LNS Hydrobar, Tailstock Conveyor approx. 20,000 spindle hours,

saw blade diameter: 400 mm Number of revolutions: 3000 r.p.m hole of sawblade: 32 mm sawblade width: 4 mm Control: NC total power requirement: 1,5-2 kW weight of the machine ca.: 162 kg required space: 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand GERD WOLLF Maschinenfabrik by a renowned manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutt ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 26300 € : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 750x560 mm : rund 410 mm, quadrat 410 : 590 mm : 0.12 kW : 1.1 kW : 4 kW : 3400 mm : 1000 mm : 2050 mm : 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch operating manual in Englisch OPTION: turn table for mitre cuts€ 3.700,-- hydraulic top clamping from above € 1.280,-- micro cooling unit € 890,-- laser cutting line € 560,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller Wacker WHK 90 L, self-propelled hydraulic articulated roller, hydrostatic drive, 2 cyl. Lombardini diesel engine, air-cooled, 10 kw/14 hp, hydraulic articulated steering, vibration compression. Working width 850 mm, defective water sprinkling, weight 1,335 kg, mast for rotating warning light. Built in 1987, machine running. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Cooling capacit: 276 kW (10/15 - 35°C) Year of manufacture: 2013 Options: Hydromodul, Free cooling Hydraulic module: 2 pcs. pump, 500 liters expansion tank. Refrigerant circuit: 2 pcs. Number of fans: 4 pcs. Type of refrigerant: R407С Compressors: 4 pcs. Danfoss (scroll) Heat exchanger: Shell-and-tube Dimensions: 3,6 x 2,26 x 2,3 m. Weight: 3 147 kg. Working hours: 28300 h. Condition: Excellent Product quantity: 1 pcs.

Hydraulic power pack with tank HYDRONORMA pump: Lamborghini MLPD/G 148 C ( MLPD/G148C ) Engine: 2.2 kW 220 / 380 V Tank: 20 l used, tested ! Dimensions: 600 x 340 x 630 mm

Trapezoidal Threaded Spindle, Hydrostatic Trapezoidal Threaded Spindle, Threaded Spindle HYPROSTATIK 05.52.012.00.0 Thread length: 925 mm Thread: Ø 52 mm pitch: 20 mm Flange diameter: Ø 140 mm bolt circle diameter: Ø 120 mm 7x threaded hole: M10 x 1.5 nut housing: Ø 100 mm, Length: 250 mm 1 - Shaft: Ø 36 x 45 mm, with groove (width: 10 mm, length: 45 mm ) 2 - Thread: Ø 38 x 1.5 x 15 mm 3 - Shaft: Ø 40 x 61 mm 4 - Bearing seat: Ø 52 x 22 mm 5 - Shaft: Ø 35.5 x 30 mm 6 - Bushing: Ø 37 x 56 mm 7 - Shaft: Ø 35 x 22 mm New ! with documents ! Dimensions ( threaded spindle ): 1190 x 140 x 130 mm Dimensions ( packaging ): 1500 x 160 x 160 mm

Hydraulic power unit, with piston pump, 5 piston HYDRODYN Type STG pump: 1389-12 Engine: RÜETSCHI ELEKTROMOTORENBAU Type KER 100,2/4/S 2,2 KW 1415 rpm 220 / 380 V 3AC Tank: approx. 30 l used, tested ! Dimensions: 730 x 400 x 630 mm

Directional valve, solenoid valve, hydraulic valve HYDRONORMA 4WE 10 J 10 / LG 24 ND ( 4WE10J10/LG24ND ) NG10 24 V DC used, tested ! Dimensions: 300 x 70 x 120 mm

Hydraulic power pack with tank HYDROPOWER GmbH Pressure: 180 bar Volume: 4 l/min pump: REXROTH PGF1-21/3,2RA01VP1 R900932135 FD Operating pressure: max. 210 bar (pump) Displacement volume: 3,00 2 cm3 / rev (pump) motor: LOHER ANCA 090 LB-04 1,5 kW 1415 rpm 220 / 380 V 3AC 50 Hz Tank: approx. 25 l used, tested ! Dimensions: 510 x 360 x 630 mm

Hydraulic power unit with tank HYDROPOWER GmbH Pressure: 180 bar Volume: 4 l/min pump: OLEODINAMICA FABBRICA MODENA 501200101/03 Engine: VEM KPER 90 L4 / 133 1,5 kW 1400 rpm 220 / 380 V 3AC 50 Hz Tank: approx. 25 l used, tested ! Dimensions: 510 x 360 x 600 mm

Hydraulic valve REXROTH, HYDRONORMA MH2FAMR 16 DA40/1A08V11 50311676 Pmax.: 380 bar New ! Dimensions: 190 x 150 x 125 mm

Hydraulic pump, vane pump REXROTH, HYDRONORMA PV6V3-42/25RA08MC 63A1 ( PV6V3-42/25RA08MC63A1 ) Shaft: Ø 19 mm Connection flange: 140 x 45 mm used, tested ! Dimensions: 230 x 160 x 130 mm

Hydraulic cylinder, double-acting, bypass check valve and lowering brake holding valve HYDROPA OIL HYDRAULIC HYA-M-80/56-580-SO-C04 piston diameter: Ø 80 mm rod diameter: Ø 566 mm stroke: 580 mm p max. 250 bar Swivel bolt: Ø 50 mm 2x bearing block: 160 x 120 x 40 mm fork bearing block: 215 x 210 x 150 mm bolt: Ø 50 mm bypass check valve: BERINGER KPL FO 16 Lowering brake holding valve: BERINGER LBV 12 FO 215-10/0,50 Pressure switch: HYDROPA HYDROSTAR DS 302/SCH/V2 p: 20 - 350 bar, pmax: 600 bar 1 changeover contact Switching capacity: 250 V AC / 30 V DC, 3 A used, tested ! Dimensions: 1110 x 240 x 250 mm

Hydraulic cylinder, double-acting HYDROPA ÖLHYDRAULIK HYE-KE-32/18-160-MD-C10 Piston diameter: Ø 32 mm rods Diameter: Ø 18 mm stroke: 160 mm mounting flange: 105 x 66 mm Intermediate flange: 120 x 110 mm rod thread: M14 x 1,1,5 used, tested ! Dimensions: 350 x 110 x 120 mm

Hydroelectric piston pressure switch REXROTH HE D1 KA 40/100 ( HED1KA40/100 ) max 460 V 15 A Dimensions: 200 x 95 x 45 mm

Hydraulic cylinder, double-acting HYDROPA ÖLHYDRAULIK HYE-KE-32/18-90-MD-C10 Piston diameter: Ø 32 mm rods diameter: Ø 18 mm stroke: 90 mm mounting flange: 105 x 66 mm Intermediate flange: 120 x 110 mm rod thread: M14 x 1,1,5 used, tested ! Dimensions: 280 x 110 x 120 mm

Hydraulic motor, constant motor HYDROMATIK A2FM 32/61W - PXX 04 ( A2FM32/61W-PXX04 ) 211.14.01.29 Shaft: Ø 25 / 21 mm, spline shaft profile, 6 wedges Flange diameter: Ø 100 / 140 mm bolt circle diameter: Ø 120 mm 4x bore: Ø 8.5 mm New ! Dimensions: 255 x 140 x 145 mm

Non-return valve, hydraulically unlockable HYDRONORMA, REXROTH Z2S6 -2-60 Opening pressure: 3 bar Maximum pressure: 315 bar Dimensions: 100 x 45 x 40 mm

Hydraulic pump HYDROMATIK A7V 40 DR 2.0 LPGMF ( A7V40DR2.0LPGMF ) 226.20.23.36 n: 1450 rpm P: 20 kW shaft: Ø 30 mm Dimensions: 450 x 320 x 320 mm

Pressure relief valve REXROTH / HYDRONORMA DBDS 10 G12/200 ( DBDS10G12/200 ) 980898 used, tested ! Dimensions: 190 x 50 x 40 mm

Check valve, hydraulically unlockable HYDRONORMA, REXROTH SL 10 PA1-41 ( SL10PA1-41 ) R900483371 5 - 315 bar max. 315 bar New ! Dimensions: 115 x 85 x 55 mm

Hydropneumatic mode of operation Max. punching height: 90 mm Resister stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Pressure relief valve, direct operated HYDRONORMA DBDs6K16/80 TÜV.SV.89-849.5.F.0.24.80 Pmax.: 630 bar Setting pressure: 0 - 80 bar spare part e.g. for TRAUB TND300 ! used, checked ! Dimensions: 140 x 40 x 40 mm

Safety device, flashback arrester, non-return valve, for burner gas WITT 85-30 DIN EN ISO 5175-1 EN730-1 Acetylene: ( A ) 1,,5 bar methane, natural gas: ( M ) 5.0 bar propane, liquefied petroleum gases: ( P ) 3.5 bar hydrogen: ( H ) 4.0 bar input: 1 LH MG Output: 1 LH AGS Material: Brass New ! Dimensions: 190 x 84 x 84 mm

Safety device, flashback arrester, non-return valve, for burner gas WITT 85-30 DIN EN ISO 5175-1 EN730-1 acetylene: ( A ) 1,5 bar city, long-distance and natural gas: ( CM ) 5.0 bar propane, liquefied petroleum gases: ( P ) 3.5 bar hydrogen: ( H ) 4.0 bar input: 3/4 LH MG Output: 3/4 LH AGS Material: Brass used, tested ! Dimensions: 180 x 84 x 84 mm

Drive unit DEMAG Roll diameter: Ø 140 mm Roll width: 65 mm Material: HydroPUR Drive flange diameter: Ø 42 / 75 mm bolt circle diameter: Ø 62,5 mm hole diameter: Ø 6.5 mm with double universal joint brush: 100 x 30 mm mounting surface: 205 x 85 mm hole spacing: 170 / 55 mm 4x threaded hole: M12 x 1.75, continuous used, tested ! Dimensions: 300 x 270 x 155 mm

Pressure transmitter HYDROTECHNIK HT-PD 3403-53-NO.54 Measuring range: 0 - 210 bar U(signal): 0.1 - 10 V DC U(supply): 12 - 32 V DC used, tested ! Dimensions: 100 x 40 x 22 mm

Bread dough dividing machine, Winkler, Hydromat, Type HT 1

Package sale of electrical and electrical parts 2x Beckhoff, monitors, type C3640, used 1x Beckhoff Contropanel, type CP7031-0002, used 1x Bosch-Rexroth, Indrat View P19, BTV, used 7x INAT, Echolink 100, used 27x Lumiflex, Passive Mirror, 0-4m, used 10x Lumiflex, Passive Mirror, 0-8m, used 5x Lumiflex, type Areal Transmiter AT-500/2, used 4x Lumiflex, Electronic, used 4x Lumiflex, Light Curtain Electronic, used 4x Siemens S5, used 12x Klöckner-Moeller, fuse disconnector, type GSTa 1, new 8x Klöckner-Möller, fuse socket, PS33/cohlzahl 3, 63A, 660V, New 1x Hydrocompensator, hk 5000 1x Siko Seiki, STP control, Unit STP -300C 1x Sony Monitor

saw blade diameter: 500 mm cutting length min.: 285 mm cutting lenght max.: 6000 mm sawing motor: 2 x 3,0 kW work height max.: 860 mm saw blade turning speeds: 2800 U/min dimensions of saw-blade: ø 500 x 3,5 mm boring of saw blade: ø 30 mm number of teeth: 120 weight of the machine ca.: 1,7 t dimensions of machine L x W x H: 7,25 x 1,25 x 1,81 m - 1 horiz. and 1 vertical pneumatic clamping cylinder per saw unit - - infinitely variable saw blade feed, accelerated hydropneumatic return stroke - - motorized longitudinal adjustment of the saw units with positioning control RAPID, electronic E 190 - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press height 140 mm Pressing force 70 kN (7 t) Hydropneumatic actuator Compressed air connection 7 bar Air consumption per stroke 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm Weight 550 kg

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. pawl width: 300 mm Max. notch height: 185 mm Max. jack depth: 185 mm Material stop can be swivelled with locking points and digital display Notch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication