hydro used for sale

offer 22537 Specifications: - working width 4040 mm - cutting capacity St 40 6 mm - Cutting angle hydro.adjustable 0.5 - 3 ° - Cutting gap adjustment hydr. - Number of hydraulic hold-downs 22 pcs -Mot. – Backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 p/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - with: - E-foot switch - Cutting line lighting - Pneumatically supported sheet metal lifting

Multi-side processing machine, multi-edge automatic lathe KEKEISEN type Tornomat 2 Multi-edge impact lathe for 4-edge and 6-edge machining, square automatic lathe Masch. No. 668 361 Year of construction approx. 1975 Workpiece diameter max. 35 mm Working range 6-edge: max. SW 32 mm Working range 4-edge: max. SW 24 mm Spindle speed 250, 355 , 450 rpm. Mains connection 380 Volt, 50 Hz - equipped with 3 fold knife head for hexagonal hydraulic feed movement 0.1 to 0.5 mm/rev - Hydro-mechanical collet clamping- Workpiece clamping diameter in the built-in collet 10 mm- Control cabinet adjacent (L x W x H 700 x 350 x 1300 mm) Space requirement automatic lathe L x W x H 1250 x 850 x 1250 mm Space requirement on pallet L x W x H 1650 x 850 x 1300 mm Weight 1.4 ton. good condition; used

turning speed range: 3000 U/min tool adaptor: ISO 50 drive motor: 22 kW distance spindle - column: 358 mm Tool bore: DIN 69871 Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min tool adaptor: ISO 40 / 50 drive motor: 11 kW distance spindle - column: 316 mm Tool bore: DIN 69871 Technical specifications • Bodies arranged at 45° with respect to each other. • Maximum transmissible torque from 550 Nm to 3.180 Nm. • Maximum speed from 1.800 rpm to 3.000 rpm. • Automatic clamping of the tool, driven by a hydro-mechanical system. • Standard tool taper DIN-2080 / 69871 and pull stud DIN-69872 (possibility to manufacture for other types). • Spindles and gears are made of case-hardened and tempered chrome-nickel. • High-precision angular contact ball bearings. Optionally • Cooling of bearings of the spindle, maximum speed up to 4.000 rpm (only for VAR-3 and VAR-5 head models). • External tool cooling. • Internal tool cooling, type AD, with rotary joint. • Air jet for cleaning the tool tapper. The data for  ...

Plate bending roll Capacity 3000x75 mm MG model 4ROLL Hydraulic machine with double pre-pinch -plate width up to 3000 mm -plate rolling thickness 75 mm Prebend 55 mm Tightest bending dia ID 800 mm Rolls length 3100 mm Upper roll 680 mm Lower roll 620 mm hydraulic unit power 100 Hp Hardened surface of the 4 rolls Pre-pinching with adjustable load to perform best roundness on edges Driven rolls powered with gear units axial and hydro motors each Cone plates bending, hydraulic conical plate rolling Electric commands joysticks and position readout with 4 axis cnc Drop-end hydraulic front open to unload closed shells. Digital readout of the 4 bending rolls. Variable speed rolling control. Central support can be added to support large dia. Shell forming Side arm can be added to hold in place think plate sheet being formed Weight of the machine ...

drive motor: 7,4 kW tool adaptor: ISO 40 turning speed range: 1800 U/min Torque: 400 Nm Technical specifications Bodies arranged at 45° with respect to each other. Maximum transmissible torque from 550 Nm to 3.180 Nm. Maximum speed from 1.800 rpm to 3.000 rpm. Automatic clamping of the tool, driven by a hydro-mechanical system. Standard tool taper DIN-2080 / 69871 and pull stud DIN-69872 (possibility to manufacture for other types). Spindles and gears are made of case-hardened and tempered chrome-nickel. High-precision angular contact ball bearings. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5345 - HYDRO Cyclone Manufacturer: KEHL+CO Dimensions: 800 x 500 x 1100 mm Voltage: 380 V Pump data: Manufacturer: Allweiler AG Type: 28B/10-MR-0M39C - TS32.160L1252 Year of construction: 1985 Output: 180 l/min Operating pressure: 1.8 bar

Capacity: 300 t Stroke: 900 mm Material thickness: 1 mm Diameter flange/disc maximum: 1 mm Day light: 1 mm Flanging and dishing machineGRAAF - HVP 300 MACH-ID 7656 Make: GRAAF Type: HVP 300 Year: 1964  Die height 1400 mm Ram size    400 mm Hydro pack 1800 x 1800 x 1200  Capacity Kg:           300 Distance between column:1700mm Table Length:          1500mm Table Width:           1500mm Table Height:          800mm Ram stroke:            900mm Approche speed:        4000mm/min. Working speed:         3000mm/min. Return speed:          4000mm/min. Length:                2500mm Width:  ...

WEINIG Rondamat 912, S/N 912-497 – fully automatic tool grinding machine • Automatic re-sharpening of straight planing knives in the cutter head with conventional or hydro-clamping • Automatic resharpening of cutters in the hydroplaning head (in front of the chest) • Automatic dividing head for up to 36 cutting edges • concentricity tolerance of less than 0.005 mm • Integrated coolant device • Table feed infinitely variable (forward / return) • Easy operation via membrane keypad and digital displays Specifications • Grinding mandrel D=50 mm • Planer head diameter min. 80 mm to max. 280 mm • Grinding length max. 260 mm • Table stroke 500 mm • Programmable knife count from 2 – 36 • Programmable grinding cycles per tool 1-9 • Clearance angle infinitely adjustable 15° – 35° • Axis angle max. 15° • Grinding spindle speed n=4,600 r ...

Hydraulic cylinder, double-acting HYDRO-LINE 606345-HR2-R 82/25X400-PU-LX M2 Piston diameter: Ø 82 mm rod diameter: Ø 25 mm stroke: 400 mm rod thread: M20 x 1,5 Base: 140 x 95 mm unused ! Dimensions: 590 x 140 x 100 mm

Hydraulic cylinder EATON, HYDRO-LINE HR5F-2X4-N 1-2-N-V-V-1-1 HA 02KR J081 210037 Rod diameter: Ø 25 mm stroke: 100 mm pmax: 100 bar unused ! Dimensions: 310 x 105 x 65 mm

saw blade diameter: 350 mm cutting diameter: 110 mm capacity 90 degrees: flat: 180 x 85 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: flat: 130 x 85 mm capacity 60 degrees: round: 105 mm capacity 60 degrees: flat: 90 x 85 mm turning speeds: 9-18-36-74 U/min vice: max. 180 mm Control: IMET CNC total power requirement: 1,5 / 2,2 kW weight: 710 kg range L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. ...

Number of motors: 2 Stück 0: 3000 mm Control: ja/CNC loading dimensions L x W x H: 4000 x 1500 x 1500 mm Weight: 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----------------------------------------------------- For wooden glazing beads, sash bars, profile strips, aluminum strips, etc. Pos. 1.1 article number 942.5103 HECHT Exenso DS350E - Working length 3000 mm - Pivoting range 22.5° (inside) to 135° (outside) - right head moveable - Saw blade holder Ø 350 mm - incl. 1 pc center support. - Pneumatic clamping of the aggregates. - Positioning control Exenso DS3 with touch panel 15 display in the dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Input of the cutting data by hand - Processing data from a cutting list (data set by default) - Processing of measuring rod data (radio caliper GMF) - Ethernet port 10/100 (TCP/IP) - USB interface - ...

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

CNC Plate Bending Roll Year 2021 Approx. 100 hours Number of Rolls 4 Rolls length 10’ 2” Top Roll diameter 18.2” – less deflecting thanks to Planetary Guide Technology Bottom Roll Diameter 16.6” Side Rolls diameter 14.2” Smallest possible diameter 21” thank to planetary guide technology Rolling Speed 20 ft/min (imperial) Installed power HP 72 (Energy Saving Technology) Power Supply V., 60 Hz Rolls material High resistance, heat treated, tested & certified Carbon Steel Rolls Hardening Induction surface up to 48 – 62 HR Rockwell C, according to Customer’s application and rolls materials Rolls Periph, Speed compensation Automatic (no torque loss, no operator setting needed) Rolls Crowning Top and lower (clamping) rolls are standard crowned to compensate Rolls deflection Rolls guiding Friction-free, mill-scale-proof, lubrication-less planetary guides R ...

SIEVE CHANGER HYDRAULIC XALOY HE 35 100MM Little used in good condition Weight of sieve changer excluding hydro unit: 375kg Sieve plate 100mm Passage 75 mm Including 3 kW hydraulic unit Year of construction 2018 Hardly used, and it shows. Price: €6250 ex VAT Kreyenborg BD plasters Nordson Xaloy Dynisco

Key data: 1300 mm, 540 mm, 720 mm

Inv. Num. : 6148 Type: CFV 1300i Producer: Cincinnati Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Hours: 59260 h Duty cycle: 26295 h Work table length: 1370 mm Work table width: 610 mm Tool magazine: 24 pieces Maximum vertical spindle speed: 9000 1/min X-axis travel: 1300 mm Y-axis travel: 540 mm Z-axis travel: 720 mm Cone: SK 40 Equipment: IKZ Conveyor New spindle 24x clamping tools 4x Hydro Vise

Key data: 170 t, 3200 mm

Deratech Ultima Press Brake 170-3200 Control ESA 660 W 2-D Graphics Full Windows Capable 19 Inch 4-axis backgauge X-R-Z1-Z2-instead of X-R Backgauge finger X3, CNC controlled+/-150 mm Additional heavy support arm on linear guide with parking space Higher narrow table for WILA plug-in matrices WILA hydraulic quick clamping incl. hydro unit CNC-controlled dynamic crowning incl. automatic Compensation during the bending process Tools, each 3100 mm BIU 021 (replica of UKB 19.021, new 2020) BIU 023 Wila V-die 85° 16/22/35/50 Rolleri T Die 30° 08/12/25/40 Rolleri At call

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.

WEINIG Rondamat R 912 S/N 912-497, YOC 1995 – Ref.-No. 119130 – fully automatic tool grinding machine • Automatic resharpening of straight planer knives in the cutter head with conventional or hydro clamping • Automatic resharpening of milling cutters in the hydraulic planer head (in front of the chest) • Automatic divider for up to 36 cutting edges • Concentricity tolerance below 0.005 mm • Integrated coolant device • Table feed infinitely variable (forward / return) • Easy operation via membrane keypad and digital displays Specifications • Abrasive mandrel D=50 mm • Planer head diameter min. 80 mm to max. 280 mm • Grinding length max. 260 mm • Table stroke 500 mm • Programmable number of knives from 2 – 36 • Programmable grinding circuits per tool 1-9 • Free-angle infinitely adjustable 15° – 35° • Axis angle max. 15° • Gr ...

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 13 - 73 U/min total power requirement: 3,0 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m High-performance vertical circle saw, fully automatic hydropneumatic. · Miter left. 60° + right. 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Gear ratio, integrated into a stable cast housing Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts. Also included Quick lateral movement when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip clearin ...

For Sale is a ACOTEC Production Line Manufacturer: ELEMATIC Output: 160 m2/h (double line) Year: 2019 This offer comprises 2 ELEMATIC production lines with a combined capacity of 160m2/h and also includes a FRUMECAR batching plant. Acotec panels are precast, non-load bearing partition walls. They are room-high and 600-mm wide, with a tongue and groove design along the vertical edge. The panels are 6 times faster to install than traditional brickwork and twice as fast as blockwork. Modules list of the production plant -Concrete Supply -Plate Handler -Plate Feeding Conveyor -Casting Module -Product Module 6/100 -Saw -Conveyor for Saw -Trimmer -Product Conveyor -Recycling -Stacker -Stack Conveyor -Stack Return Conveyor -Crossing Station -Restacker -Product Tilting Receiver Conveyor -Product Tilting Device -B-Quality Conveyor -Pallet Conveyor -Cleaning  ...

Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and Special solutions Accessories: Total enclosure,, Loading magazine for tools up to 350 mm long,, automatic feed (hydro-pneumatic),, Rapid traverse adjustable via touch panel,, Automatic fire extinguishing system Kraft & Bauer FB 703,, Length positioning freely programmable,, Control Siemens SPS-S7 300,, Preparation for connection to central coolant system., Workpiece diameter with loading magazine: 3 - 20 mm, Workpiece length without loading magazine: 3-32mm, Workpiece length: 3-150mm, Spindle speed grinding spindle: 2000 rpm,, weight: approx. 1,700 kg, Dimensions L x W x H: 1900 x 1500 x 2400 mm, colour: Grey

Consistent precision when bending due to 3-point technology and pressure distribution via hydro cushion. Very good maintained condition. Has always been serviced regularly and annually by the company Bystronic (service reports are available). Servomotors were exchanged. Still some spare or wear parts new with it.

Manufacturer: Olaer Parts: Euro-Hydro - Brook Compton 3 Phase Cooler Matrix Maximum Static working pressure: 21BAR Maximum dynamic working pressure: 14 BAR (Tested according to ISO/DIS 10771-1 Heat transfer allowance: +-6% Maximum fluid temperature in the cooler matrix: 120 Celsius degrees Maximum Cooling capacity: 160kW Fluid compatibility Mineral oil: HL/HLP Oil/water emulsion: HFA/HFB Water Glycol: HFC Phosfatester: HFD-R Material Cooler matrix: Aluminium Fan housing: Steel Fan blades/hub: Glass fibre reinforced polypropylene/aluminium Fan guard: Steel Other parts: Steel Surface treatment: Electrostatic powder coated 3Phase Motor Insulation class: F Rise of temperature: B Protection class: IP55 1Phase Motor Insulation class: B Rise of temperature: B Protection class: IP 44 3Phase Motor LAC 004 Rated voltage: 230/400 50/60 Hz Insulation class: ...

Semi-automatic labeling machine for applying 1 label to cylindrical containers | (in French) is a semi-automatic labeling machine for self-adhesive labeling of cylindrical products such as wine and beer bottles, cans, jars, jars, bottles of hydro-alcoholic gels, oral care products, etc. Equipped with a labeling station, it can apply a label to a wide range of formats and components (glass, PET, PVC). Equipped with a labeling station, it can apply a label to a wide range of formats and components (glass, PET, PVC). Its adhesive labeling output can reach up to 10 products/minute (i.e. 600 bottles/hour). Used in a wide variety of sectors, including viticulture, brewing, food processing and cosmetics, this semi-automatic labeling machine is highly versatile. The machines appeal lies in its ease of use, efficiency, excellent value for money and, above all, its robustness (very few c ...

Including ISO holder with plate, now with Mas Bt50, 40 tools, hydro unit with cooler, high pressure and low pressure water with new exchanger arm, bearings replaced 2.5 years ago, including discharge belt, worm gears removal residual material up to 6000 rpm. Lot must be professionally dismantled. Lot is connected to water/electricity/gas, pipe and/or cabling must be capped. Damage and/or negligence to the property will be recovered from the buyer. We advise you to bring your own materials. No tap available. Viewing day for this lot is by appointment. Please send an email to: info@petervanderleegte.nl

Filtration unit furbished with 2 PALL 8304 X-length housings For Hydrolic and lube oil filtration Any filterelements available on request

Material: stainless steel 1.4571 Content: 4040 ltr Pressure (inner): 6 / - 1 bar Weight: 14000 kg Length x Width x Height: 7000 mm x 1600 mm x 2100 mm Machine equipped with vapour filter. Drive : hydrostatic, compression 250 bar, revolution 180 Upmmax.; Torque motor : 12000 Nm; Torque : 24000 Nm ; Volume jacket : 268 ltr. Temperature indoor and jacket : + 300 ° C / - 10 ° C; Exchange area : 31,4 m². Very good condition! You can also get the entire system with all components you need.

High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all application ...

Main drive - spindle motor at 2450 RPM power - 4,5 kW spindle speed within four gears - infinitely variable speed range 20-4000, tool holder horizontal and vertical ISO 40 tool CLAMPING hydromechanisch 1200 daN, Quill stroke vertical fur 80 mm feed drive - single DC motors 1-2000 mm / min feed force in all axes each axis 5400 N, rapid traverse in all axes 5 m / mon workspace - along x axis 500 mm, cross y axis 360 mm, vertical z-axis 400 mm measurement - measurement of X, Y, Z - direct, resolution 0.001 mm, input gauge 0.001 mm, display step 0.005 mm, resolution 0.001 mm table AUFSPANNFLaeCHEN of rigid 4.Achse angle table 800 x 390 mm number and distance of T-grooves, wide T-slots 6/63/14 h7 NC rotary table 30 swivel 4.Achse - diameter. 380 mm control train control HEIDENHAIN TNC 115 / TNC 355 - screen screen - control SIEMENS 3 M4 810 M Kuhl installation - lubrication coolant - rinsing  ...

Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones

Warman ®, AH, ® pump 4/3, AH type: 4/3, AH storage: C standard number: WP35758 Hydrostatischer test pressure: 14 cash speed: 2751 the pump is as good as new. It was carried out only one test flow with the pump. from the cyclone supply up to regrinding, Flotation and departures is the Warman ®, AH, ® pump the best choice.

Hydrostatic pressure transmitter with metallic measuring cell Manufacturer: Vega Grißhaber KG Type: D36G 0.2 EXB Continuous level measurement by means of a hydrostatic Pressure transmitter with metallic measuring cell in compact design with Threaded connection, flexible cable extension as well as one in the sensor housing built-in two-wire electronics with analog signal transmission 4 ... 20 mA/HART suitable for a separate evaluation device e.g. type VEGAMET 381 Ex. Scope The pressure transducer is a pressure transmitter for pressure and level measurements of liquids and viscous fillers with higher temperatures in the chemical, food and pharmaceutical industries. The pressure transducer offers the possibility to detect even the smallest measuring ranges from 0.1 bar. Your benefits - Highest measurement reliability even at rapidly changing process temperatures - High ...

Technical details: Plasma current source Messer Griesheim, Plasmette cutting range for steel up to 40 mm power at 80% ED - 120 A cutting medium Argon, Hydrogen, nitrogen cooling with fan + water cooling unit voltage at 230 volts = 54 A current voltage at 400 volts = 31 A input voltage 25 KVA machine weight approx. 0.3 t room requirement approx. 1.2 x 1.0 x 1.2 m The plasma cutting torch is used for cutting all electrically conductive metals, cutting power 8 or 8 13 KW, with cutting stroems 70 or 120 A. As plasma-forming gases argon, hydrogen and nitrogen are used. The use of nitrogen prevents beard formation and nitration in steel in some materials. Argon and nitrogen can be used to cut dull sheets and cut stainless steel and aluminium.; ready for use.

APV Liquiverter TB-250-01. yom.1993, excellent condition. Batchcapacity 250 litres. with double wall for heating or cooling during mixing. The Flex-Mix™ Liquiverter is specially designed for products with low to medium viscosity in order to obtain a fast mixing of powders and particles with liquids. The Flex-Mix™ Liquiverter is usable for mixing, dispersion, recombination and reestablishment of soluble products. It is also used for reconstitution of dairy products, manufacturing of fine foods, emulsions, preparation of starch and hydrocolloid solutions

P12 - used appr. 30 m³ / 30,000 litres PE-tank, plastic tank / flat bottom tank, double-walled, former chemical tank, in good condition. capacity: 30 m³ / 30,000 litres diameter inside: appr. 3.00 m outer dimensions: appr. 3.48 m x 4.80 m overall height Double-walled, (i.e. with an outer hull), non-translucid, various connections such as ventilation, inlet, outlet, etc., lid on top of the roof. For transportation the different attachments, level indicator, probes, pipes, etc. will be dismantled and are supplied along with tank. Former hydrochloric acid 31% tank Chemical tank for hydrochloric acid, sulphuric acid, methylated, ironIIIchlorid, formic acid, hydrogen peroxide, acetic acid, etc. The tank's size makes it perfect for placement inside a shed or barn, as a storage tank for water, waste water, sewage, seeping juice, manure, AHL/ASL etc. High-quality plastic t ...

Make: Omes Type: Tramatic 370S Year of construction: 1988 Saw blade diameter: 350 mm Features of this machine are: -mechanical pneumatic Vice -hydropneumatic feed can be adjusted (see Control Panel) -Saw process and open the Vice manually or automatically -After reaching the depth of saw the saw head will return automatically to its basic position Saw capacity - 90 ° degree cut -Diameter of 130 mm -100 x 100 mm rectangular tube -Fermentation cuts adjustable - right-hand and left-hand fermentation, if necessary in a voltage Machine has been little used

Round table with C-axis FKD 60, 6000, faceplate diameter capacity 200 to, speeds 60 with manual gearbox ZF, Masterslafeverspannung, 4 spindle motor Siemens 40 kW, speed 1 level 0-10 RPM, 420000 nm 2nd stage 0-60 speed rpm, 115000 NM, circulating oil lubrication system, hydrostatic storage, dimensions: length: 6900 mm, width: 6000 mm, height: 1200 mm, weight 80 t.

P18 - used appr. 30 m³ / 30,000 litres PE-tank, plastic tank / flat bottom tank, double-walled, former chemical tank, in good condition. capacity: 30 m³ / 30,000 litres diameter inside: appr. 3.00 m outer dimensions: appr. 3.48 m x 4.80 m overall height Double-walled, (i.e. with an outer hull), non-translucid, various connections such as ventilation, inlet, outlet, etc., lid on top of the roof. For transportation the different attachments, level indicator, probes, pipes, etc. will be dismantled and are supplied along with tank. Former hydrochloric acid 35% tank Chemical tank for hydrochloric acid, sulphuric acid, methylated, ironIIIchlorid, formic acid, hydrogen peroxide, acetic acid, etc. The tank's size makes it perfect for placement inside a shed or barn, as a storage tank for water, waste water, sewage, seeping juice, manure, AHL/ASL etc. High-quality plastic t ...

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

Compact tractor with selectable four-wheel drive, infinitely variable hydrostatic travel drive, Diffentialsperre, 3-cyl.-Kubota diesel engine, 15 kw/20 HP EZ 5/95, only about 350 hours of operation, cabin, heating, power steering, turf tyres, Front hitch, front PTO, 2 x hydraulic connections front. Rear three point linkage, rear PTO 540/1,000 rpm. Complete with vehicle and good battery! Needs service, otherwise good machine. Price ex. export € 7.900 / / in Germany plus 19% VAT price € 9.401,- Equipment optional at extra charge available, E.g. snow blade, broom, centrifugal spreader roller spreader. We supply used winter maintenance technology - Holzhäcksler - engines and more - see photos!

1 DETTIN hydroextractor for cones type BERTA 24 hydraulic type

New 161 i with automatic gas console year construction year 2015 installation and commissioning on request data see PDF HiFocus 160i 400V ArH2N2/O2 up to 15m with plasma torch connection unit Oxygen; Nitrogen; Argon; Hydrogen; Air oxygen; Nitrogen; Forming gas 5; Air plasma machine burner PerCut 170-2 with vortex gas ; immediately available

- Hobelbreite 20 - 320 mm - Hobelhöhe 8 - 230 mm - stufenloser Vorschub 5 - 25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - untere Welle min. /max. Werkzeug FI 110 / 145 mm - rechte Welle min. /max. Werkzeug FI 110 / 200 mm - linke Welle min. /max. Werkzeug FI 110 / 200 mm - obere Welle min. /max. Werkzeug FI 110 / 200 mm - 2. untere Welle min./max. Werkzeug FI 110 / 200 mm Spindelanordnung: 1. unten 11,0 kW 2. rechte vertikal 7,5 kW 3. linke vertikal 7,5 kW 4. oben 11,0 kW 5. unten 11,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung 1,1 kW - Gesamtanschluss 54,6 kW - Satz Vorschubwalzen FI 180 x 40 x 110 mm - angetriebene Walzen im Tisch - Aufgabetischlänge 2000 mm - Druckluftanschluss 8 bar - Spannung 400 V / 50 Hz - Abmessungen L=4191, B=2144, H=2000 mm - Gewicht 6500 kg inklusive: - obere Welle elektrisch verstellbar mit Vorschubsystem und digitaler PLC Anzeige - hart v ...

- Hobelbreite 20 - 330 mm - Hobelhöhe 8 - 230 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - untere Welle min. /max. Werkzeug FI 110 / 145 mm - rechte Welle min. /max. Werkzeug FI 110 / 200 mm - linke Welle min. /max. Werkzeug FI 110 / 200 mm - obere Welle min. /max. Werkzeug FI 110 / 200 mm - 2. obere Welle min./max. Werkzeug FI 110 / 200 mm - untere Welle min. /max. Werkzeug FI 110 / 200 mm - 6 Spindeln 1. unten 11,0 kW 2. rechte vertikal 7,5 kW 3. linke vertikal 7,5 kW 4. oben 11,0 kW 5. oben 11,0 kW 6. unten 11,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 67,6 kW - Satz Vorschubwalzen FI 180 x 40 x 110 mm - 5 Stück angetriebene Walzen im Tisch - Aufgabetischlänge 2000 mm, gehärtete Ausführung - Druckluftanschluss 8 bar - Absaugstutzen 2 x 150 mm, 4 x 180 mm - Spannung 400 V / 50 Hz - Abmessungen L=4854, B=2144, ...

Sale of parts and assemblies ex large area mower Shibaura CM 364: Diesel engine 25 kw / hydrostatic transmission / axles / electric / cabin / wheels and more. no mower-deck.

Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...

- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. Werkzeug FI 160 /230 mm - linke Welle min. / max. Werkzeug FI 160 /230 mm - obere Welle min. / max. Werkzeug FI 160 /230 mm - 2. obere Welle min. / max. Werkzeug FI 160 /230 mm - untere Welle min. / max. Werkzeug FI 160 /230 mm -max. Sägeblattdurchmesser 2. obere Welle 300 mm Motorleistung: 1. unten 15,0 kW 2. rechte 11,0 kW 3. linke 11,0 kW 4. oben 15,0 kW 5. oben 15,0 kW 6. unten 15,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 94,5 kW - Jointer obere Wellen und unter Welle - horizontale Wellen mit Gegenlager / Hydrospannung - obere Welle elektrisch verstellbar mit Vorschubsystem mit Digitaler Anzeige - linke Welle elektrisch verstellb ...

Technische Daten: - Hobelbreite 30 - 260 mm - Hobelhöhe 10 - 200 mm - min. Werkstücklänge 840 mm (einzeln) / 280 mm (bei Serie) - 6 Spindeln - Spindel FI 50 mm - Drehzahl 6500 U/min - Vorschubgeschwindigkeit stufenlos 8 - 36 m/min - Abrichtwelle, unten max. Werkzeug FI 125 - 140 mm - Rechte Vertikalwelle max. Werkzeug FI 118 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 118 - 200 mm - obere Horizontalwelle max. Werkzeug FI 118 - 200 mm - zweite obere Horizontalwelle max. Werkzeug FI 118 - 200 mm - untere Horizontalwelle max. Werkzeug FI 118 - 250 mm Spindelfolge: 1. unten 7,5 kW 2. rechte vertikal 11,0 kW 3. linke vertikal 11,0 kW 4. oben 11,0 kW 5. zweite obere 11,0 kW 6. untere 11,0 kW - Motor Vorschub 7,5 kW - Motor Höhenverstellung Vorschub 0,75 kW - Motor Höhenverstellung obere Welle 0,75 kW - Motor Breitenverstellung linke Welle 0,18 kW - Gesamtleistung 71,68 kW - Drucklu ...