TOP
Seller

Carpentry machine / log cabin carpentry machine KRÜSI CM 40 Chalet-machine

wood working machines / other wood working machines

Chicagowood Malax
[ dealer profile ]

Mr Justus Jahn
Paxalvägen 39
66140 Malax
Finland

Finland ... phone

approved
dealer

RESALE member since 2005

machine list (38)

send inquiry

add to watchlist

send inquiry

item-No.: 161549367	Quantity: 1	Date: 07.04.2024
Year of manufacture: 1996	Location: Finland 66140 Malax

Price:	33,900 EUR
Manufacturer:	KRÜSI
Model:	CM 40 Chalet-machine
Type of machine:	Carpentry machine / log cabin carpentry machine
Description:	Carpentry machine / log cabin carpentry machine KRÜSI CM 40 Chalet-machine used machine KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization) Splitting wedge adjustable Engine speed min 1 / 2900 Power kW 2.2 Horizontal / vertical milling unit Horizontal milling unit Cutter - Ø 180mm Cutter width max.130mm from cutter width 60 mm only use milling cutters made of aluminum alloy with indexable cutting edges 2 motors Hydropneumatic feed kW 2.2 each Hydropneumatic feed Rapid traverse and working feed infinitely adjustable Drilling unit Drill receptacle collet ER 25 Clamping - Ø max. mm 16 Drill - Ø max. mm 32 Motor min'1 1450, kW 1,8 Face groove milling unit Cutter- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrics Operating measuring voltage V / Hz 380, 50 Nominal power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 slow Max. kW 4.4 are in use at the same time Dimensions Machine width 1300-2400mm depending on version Machine depth 1600mm Total height, protective cover at the bottom 1600mm Total height, protective hood to 2200mm Suction connection nozzle - Ø underbody extraction Sawing unit Horizontal/vertical milling unit Drilling unit Face grooves - milling unit Pit extraction ( see requirement for the installation site ) Connection piece- Ø 200 Weight approx. 800- 1300kg depending on version Noise information Workplace-related emission value according to DIN 45635 dB(A) dB(A) Idling Processing Sound power level Idle dB(A) Processing dB(A) (As a result of measurement and manufacturing tolerances, deviations of up to 3 dB(A) are possible. Dust emission Measuring point Place of measurement/activity Processing of spruce beams On the left side in front of the machine On the right side in front of the machine Sampling time: 45min Sampling time: 45min Conc. Total dust in mg/m3 <0.18 <0.18 The maximum workplace concentration (MAK) for spruce wood dust is 0.2 mg/m3 (total dust) MAK = Maximum workplace concentration of a substance in the air, when exposed to it for 8 hours a day. Description of the machine 5.1 Principle of operation Processing of timber for chalet construction. The beams can be machined in one pass, e.g. - cut to length (if equipped with sawing unit) - Horizontal and vertical milling of the necks in one clamping operation - drilling (if equipped with drilling unit) - milling of the face C4421141 grooves (if equipped with face grooves milling unit) 5.2 Standard version Robust construction in welded construction. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Carriage guided by means of dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Completely operational, with contactor control, Motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). Electrically controlled with hydropneumatic horizontal and vertical feed, together with the start-up of the milling motors. Rapid traverse and feed are infinitely adjustable. Fully wired and installed, including air maintenance unit. Flecklings with a thickness of more than 14 cm must be processed in two tensions. Such patches must be added to the size of the extra thickness for re-milling. Machine protection covers over the moving parts with gas spring weight compensation. 5.3 Standard Accessories Mouth wrench SW 41 for milling tool toggle hexagon socket wrench SW 10 ring wrench SW 36 Groove wrench for ER 25 (if equipped with drilling unit) Control cabinet key Electrical wiring diagrams in the control cabinet Operating instructions for CM 40 Technical data subject to change ! seller offer No. resale 161549367

Share this machine on Facebook:

Carpentry machine / log cabin carpentry machine KRÜSI CM 40 Chalet-machine

Inquiry