hydro used for sale

Technische Daten: - Hobelbreite 50 - 330 mm - Hobelhöhe 8 - 250 mm - min. Werkstücklänge 700 mm (einzeln) / 300 (bei Serie) - stufenloser Vorschub 8-36 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - untere horizontale Welle min. /max. Werkzeug FI 140 mm - rechte vertikale Welle min. /max. Werkzeug FI 140 / 230 mm - linke vertikale Welle min. /max. Werkzeug FI 140 / 230 mm - obere horizontale Welle min. /max. Werkzeug FI 140 / 230 mm - 2. obere horizontale Welle min./max. Werkzeug FI 140 / 230 mm - untere horizontale Welle min. /max. Werkzeug FI 140 / 230 mm - 6 Spindeln 1. unten 11,0 kW 2. rechte vertikal 11,0 kW 3. linke vertikal 11,0 kW 4. oben 15,0 kW 5. oben 11,0 kW 6. unten 11,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung Vorschub 1,5 kW - Motor Höhenverstellung obere Welle 0,75 kW - Motor Breitenverstellung linke Welle 0,37 kW - Gesamtanschluss 84 kW - Vorschub ...

Technische Daten: - Hobelbreite 20 - 260 mm - Hobelhöhe 8 - 180 mm - 5 Spindeln - Spindel FI 50 mm - Drehzahl 6000 U/min - Vorschubgeschwindigkeit stufenlos 6 - 30 m/min - untere Horizontalwelle max. Werkzeug FI 110 - 145 mm - Rechte Vertikalwelle max. Werkzeug FI 125 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 125 - 200 mm - obere Horizontalwelle max. Werkzeug FI 110 - 200 mm - 2. untere Horizontalwelle max. Werkzeug FI 110 - 200 mm Spindelfolge: 1. unten 7,5 kW 2. rechte vertikal 7,5 kW 3. linke vertikal 7,5 kW 4. oben 11,0 kW 5. untern 11,0 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 1,1 kW - Gesamtleistung 43,6 kW - Druckluftanschluss max. 6 bar - Absaugstutzen 5 x 150 mm - Abmessungen L=4280, B=1700, H=1700 mm - Gewicht 4600 kg INKLUSIVE: - Horizontalspindeln mit Gegenlager (Hydrospannung) - hart verchromte Tische - CE Norm, TÜV Rheinland - pneumatischer Seitendruc ...

Sweeper and scrubber Tennant 8210 diesel 100 Combination of suction Sweeper and wet scrubbing machine with Kubota diesel engine, High emptying, infinitely variable hydrostatic travel drive, automatic functions. 2 x available, paid hours approx. 220 and about 1020. More information, photos and offer on request!

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Technische Daten: - Hobelbreite 20 - 260 mm - Hobelhöhe 8 - 180 mm - 6 Spindeln - Spindel FI 50 mm - Drehzahl 6000 U/min - Vorschubgeschwindigkeit stufenlos 6 - 30 m/min - untere Horizontalwelle max. Werkzeug FI 110 - 145 mm - Rechte Vertikalwelle max. Werkzeug FI 125 - 200 mm - Linke Vertikalwelle max. Werkzeug FI 125 - 200 mm - obere Horizontalwelle max. Werkzeug FI 110 - 200 mm - 2. obere Horizontalwelle max. Werkzeug FI 110 - 200 mm - 2. untere Horizontalwelle max. Werkzeug FI 110 - 200 mm Spindelfolge: 1. unten horizontal 7,5 kW 2. rechte vertikal 7,5 kW 3. linke vertikal 7,5 kW 4. oben horizontal 11,0 kW 5. oben horizontal 11,0 kW 6. unten horizontal 11,0 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 1,1 kW - Gesamtleistung 62,1 kW - Druckluftanschluss max. 6 bar - Absaugstutzen 6 x 150 mm - Abmessungen L=4710, B=1700, H=1700 mm - Gewicht 5000 kg INKLUSIVE: - Horizonta ...

Technische Daten: - Arbeitslänge 3000 mm - Arbeitsbreite 1250 mm - Material Dicke 25 - 90 mm - Anzahl der Etagen 12 - Anzahl der Einspanneinheiten pro Fach 8 - Luftanschluss 8 bar, 1/2 \" - Motorleistung Drehvorrichtung 0,55 kW - Druck pro Einspanneinheit 1 - 12 kN - Max. Belastung pro Fach 150 kg - Pneumatik Camozzi - Elektrik Telemecanique - Getriebemotor Watt - Einspanneinheiten sind gezinkt - Schutzgitter - Hydraulik Aggregat - Pumpendurchfluss: 6,3 l - Leistung Hydromotor 3,0 kW - Hydrauliktank 50 l - max. Druck Hydraulikmotor 110 bar -Transport dimensions:   3800 x 2400 x 2200 mm ,1400 kg   4400 x 1600 x 2000 mm , 950 kg   1600 x 1600 x 800 mm , 900 kg   1600 x 1600 x 800 mm , 900 kg - Aufstellmasse L x B x H 4400 x 4600 x 3700 mm - Gewicht 4300 kg Option: Andruckelemente für dünnene Platten (15-25 mm) EUR 44,-/Stk Ausrichten mit 4 Pneumatischezylindern EUR 600,- Beschreibun ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

Technische Daten: - Arbeitslänge 3000 mm - Arbeitsbreite 1250 mm - Material Dicke 25 - 90 mm - Anzahl der Etagen 16 - Anzahl der Einspanneinheiten pro Fach 8 - Luftanschluss 8 bar, 1/2 \" - Motorleistung Drehvorrichtung 0,55 kW - Druck pro Einspanneinheit 1 - 12 kN - Max. Belastung pro Fach 150 kg - Pneumatik Camozzi - Elektrik Telemecanique - Getriebemotor Watt - Einspanneinheiten sind gezinkt - Schutzgitter - Hydraulik Aggregat - Pumpendurchfluss: 6,3 l - Leistung Hydromotor 3,0 kW - Hydrauliktank 50 l - max. Druck Hydraulikmotor 110 bar -Transport dimensions:  3800 x 2400 x 2200 mm ,1400 kg  4400 x 1600 x 2000 mm , 950 kg  1600 x 1600 x 800 mm , 900 kg  1600 x 1600 x 800 mm , 900 kg - Aufstellmasse L x B x H 4400 x 5000 x 3700 mm - Gewicht 4500 kg Option: Andruckelemente für dünnene Platten (15-25 mm) EUR 44,-/Stk Ausrichten mit 4 Pneumatischezylindern EUR 600,- Beschreibung: D ...

Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany

- Arbeitslänge 2500 mm - Arbeitsbreite 1200 mm - Verleimdicke 20 - 60 mm - Anzahl der Ebene 3 - manuel Drehen - die Pressung ist mit dem einseitigen hydraulische Zylinder ausgeführt - Anzahl der Zylinder pro Ebene 5 - die Druckzylinder sind fest - Zylindertyp FI 50 x 150 mm - Spezifische Druck 6 kg/cm2 - Anzahl der Niederhaltern pro Ebene 2 - jede Niederhalter hat einen pneumatischen Zylinder - Typ der pneumatische Zylinder FI 50 x 100 mm - jede Niederhalter hat eigene Luftventil für Ein/Aus - Druckregulation mit Regulator - Hydraulische Aggregat - Pumpendurchfluss 6,3 l - Leistung der Hydromotor 2 kW - max. Druck für der Hydromotor 30 - 150 bar - Parkplatz für die Niederhalter

Technische Daten: - Arbeitslänge 3500 mm - linker Kopf fest - hydropneumatischer Sägevorschub - Drehung der Köpfe rechts und links - Schwenkung der Köpfe 90C bis 45C - dadurch auch für Schifterschnitte geeignet - Positionierung nach Skala mit Spannvorrichtung - Blaspistole - 2 HM-Sägeblätter 400 x 30 mm - Motor: 1,5 kW - Spannung: 230/400V, 3~, 50Hz - FI Sägeblatt: 400 x 30 mm - Drehzahl Sägeblatt: 3800 U/min - min. Schnittlänge: 565mm - max. Schnittlänge: 3300mm - Luftanschluss: 6-8 bar - Abmessungen LBH: 4150x1200x1650 mm - Gewicht: 450 kg

Make SKODA type SUA 125 PA built 1992 place of storage from location country of origin Czech Republic delivery time immediately freight base from location Technical details: turning diameter over bed 1500 mm Turning diameter over support 1100 mm turning length 13000 mm Control SIEMENS 820 T plan disc speed range 0.9 - 315 r pmWork unit weight between tips max. 14000 kg Main drive DC 42 kW Total power requirement 65 kW Machine weight approx. t space requirement approx. m Additional information - CNC control SIEMENS 820 T - increased turning diameter 1500 mm - positioning of the flat disc via M-function or manually in typing mode with digital display - other accessories: + belt grinding device + 2 bezels max. 630mm and 4.8t load capacity + 2 roller blocks max. 950 mm and 7t load-bearing capacity - Hydrostatic main spindle bearing

Used parts ex ISEKI TG 5390 AHL. 28 kw/40 hp turbo diesel, hydrostat drive 3-stage, 4-wheel drive, front power lifter, cabin, lawn tyres. Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

CNC carousel lathe with tool changer.You Ji GTH-35/45 ATC-I. Built 2012.Fanuc 0i-TD CNC Control.Planchime diameter 3,500 mm.Hydrostatic table - Max load 50 t.swing diameter max. 4,500 mm.Turning diameter max. 4,000 mm.turning height max. 2,200 mm.Stoesselplanweg X -1.750/+2.160 mm.Stoesselsenkrechtweg Z 1.500 mm.Table drive 60/75 kW.Speed 2 x 75 mm.Torque at the table 67,330 Nm.Tool magazine with 16 places.Tool holder 7/24 BT 60.Place requirement 12,375 x 8,210 mm.Machine height 7,920 mm.Full cladding.3-colors Signal lamp.NEW - 200 operating hours ! Immediately available;; As good as new

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

Technical Details: Plasmastromqülle Messer Griesheim, Plasmette cutting range for steel to 40 mm capacity at 80% ED - 120 A cutting medium, argon, hydrogen, nitrogen cooling fan + water cooling unit voltage at 230 volts = 54 amps power at 400 volts = 31 A Input voltage 25 KVA Machine weight about 0.3 tonnes of space is about 1.2 x 1.0 x 1.2 m. The plasma cutting torch used to cut all [...Technical data truncated]; Operational

construction height: 2.800 mm height of stroke: 3.800 mm lifting forece: 4.000 KG equipment: - cabinet - safety cover - Rexroth hydrostatic drive - lenghtwise-cross-cirrcle- and diagonal drive - all around lighting and reversing alarm - XXL broad cabinet - door for cabinet - heating for cabinet

used baler Manufacturer: PAAL Type: CPH 6540 Built: 2007 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force at approx. 300 bar: 650 kN Channel cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of connecting wires: 4 pieces Binding: 4-fold horizontal Power: Main drive motor: 75 kW Wire pull: 3 kW Twisting: 3 kW Hydraulic oil tank volume: 2200 l Machine weight: 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: - Machine design consisting of: - printing plate with bearing roller guide at the bottom and inside, - Press box bottom made of highly wear-resistant special steel, - interchangeable, screwed tread irons for the lower plate rollers, - Doors ...

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

Combination of suction Sweeper and wet scrubbing machine with 4 cyl. Kubota diesel engine, infinitely variable hydrostatic travel drive, automatic functions. Max working width 1270 mm, high emptying. Solid technology from a brand manufacturer, ideal for indoor and outdoor areas! 2 x available: Year 2006 / 220 h and year 2005 / 1020 h More Sweepers on stock - information, photos and special offers on request!

Hydropneumatic functioning Punching power: 50 kN Height: 140 mm

V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition,  ...

Furnacce 1200 hardness tester 300x300x500 mm Temperature max 1200C Ölbrenneranlagen Retortenöfen Teil Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen Tunnelofen Haubenofen Schachtofen Sonderanlagen Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmaschinen Drehherdöfen Doppelkammeröfen buerstlein Draht Glühöfen Durchlauföfen zirlguss Elevatoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herd ...

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

Technical details Cutting width= .40 - .000mm Machine weight approx.: 640 kg Room requirements LxWxH approx.: 1800 x 1350 x 1920mm The machine was little needed, very good condition Extract from the manufacturer Infosheet: Technical data > For single to medium series productionâ Maximum cutting depth: 40mm The machine is in a very well maintained and very good condition and can be visited at any time under electricity by appointment. Subject to changes and errors in the technical details and information provided. Round cuts from 40 to 1000mm - size II Round cuts from 40 to 1500mm - size III The machines P 2000 II and P 2000 III are stand machines in a stable steel construction. They cut cleanly, dimensionally, with a straight cutting edge all cutting-edgeable materials: such as rubber, felt, cardboard, plastics, fibres, graphite with and without inserts, et ...

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

horizontal conveyor belt with hydromotor

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 yom: 2010 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

A 208 liter barrel with gear oil is offered. Manufacturer Totoal Type: Dynatrans MPV (old name Transmission WB) Applications: For lubrication of mechanical gearboxes, converters, hydrostatic transmissions, hydraulic systems, power steering, Oil bath clutches and oil bath brakes. Can be used in gearboxes when a gear oil according to API GL-4 is required in SAE class 10W-30 or 80W. Can be used in hydraulic systems when an HVLPD oil (DIN 51524-3) is required in ISO VG 68. characteristics International Specifications: API GL-4 Shares: Massey Ferguson CMS M 1145, M 1143 Volvo CE WB 101 John Deere: JDM J20C ZF TE-ML 03E/ 03L/ 05F/ 06P/ 17E/ 21F TotalEnergies recommends the use of: McCormick HTX Valtra G2-08 Ford M2C 134D and FNHA 2C 201.0 Case MS 1206/ 1207/ 1209 CNH MAT 3505/ 3509/ 3525/ 3526/ 3540 New Holland NH 410B / NH 410C Massey Ferguson CSM M 1135/ M1141  ...

Graham Steam tunnel Model: Z3271 2010, Stainless frame and stainless mesh belt, 3000mm x 380mm belt, variable speed, with Hydromatik steam generator, 3Ph

CARRIER 30 RA 040 Brand: CARRIER Type: 30 RA 040 Stock number: M21-4526 Cooling capacity: 39.3 kW Application: Cooling Number of fans: 1 Refrigerant: R407C Refrigerant Content: 10 kg Voltage: 400 Volts Power consumption: 30 A Dimensions: 2100 x 1100 x 1400 mm Weight: 526 kg Year: 1999 Number in stock: 1 piece(s) Price: Quote request Description: Nice air-cooled Carrier chiller with 1 scroll compressor on 1 circuit. This machine is equipped with coated fins, a Pro Dialog Plus controller and a hydromodule (water pump and expansion vessel). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration

Techn Data Product type: Wing cell pump Manufacturer: Alcatel / Adixen Condition: used Entrance: KF25 Exhaust: KF25 Engine: 1 phase, 115 / 208-230 V, 50/60 Hz Oil: Hydrocarbon Pumping speed: 16 CFM (60 Hz) Final vacuum: 7.5 x 10 & supmin; & sup5; Torr Weight: about 25Kg Mistakes not ruled out

BLUE BOX Epsilon Echos HP 37/ST 1PS Brand:BLUE BOX Type:Epsilon Echos HP 37/ST 1PS Stock number:M21-4507 Cooling capacity:35.6 kW Application:Cooling/Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:9 kg Voltage:400 Volts Power consumption:13 kW Dimensions:1350 x 550 x 2100 mm Weight:460 kg Year:2016 Number in stock:1 piece(s) Price:On request Description: Nice air-cooled Bleu Box chiller/heat pump with 1 Copeland ZP154 scroll compressor on 1 circuit. This machine is equipped with a Carel micro C² SE controller and a hydronic module (water pump, expansion vessel and 140 liter buffer tank). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating capacity: Q= 38.1kW, P= 11.9kW at +40/45°C and +7°C dry bulb, +6°C wet bulb). Please visit also our website: used-refrigeration

GEA GLAC 0152 AC1.SL Brand:GEA Type:GLAC 0152 AC1.SL Stock number:M21-4513 Cooling capacity:34 kW Number of fans:4 Refrigerant:R407C Refrigerant Content:6 + 6 kg Voltage:400 Volts Power consumption:15 kW Dimensions:2000 x 1150 x 1990 mm Weight:850 kg Year:2006 Number in stock:1 piece(s) Price:On request Description: Nice air-cooled Gea chiller with 2 Copeland scroll compressors distributed over 2 circuits. This chiller is equipped with speed-controlled fans, a CVM2 controller and a hydronic module (water pump, expansion vessel and 250 liter buffer tank). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration

Machine details Bearing number 1105-03038 Machine type Machining Center - Vertical Make CHIRON Type FZ12 WM Built in 1997 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time immediately Freight base freely loaded from location Technical details x-path 550 mm y-path 300 mm z-way 425 mm Tool holder SK 40 Control Siemens 810 Total power requirement 12 KVA Machine weight approx. 4.0 t Transport dimensions LxWxH 2.05x3.05x3.0 m Information Machine is located in the technical GOOD CONDITION with interchangeable plate 2 X 4th axis PEISELET PT 160 WITH SIEMENS 810 WITH HYDROLIC CLAMPING IN THE TABLE 24 FACH WERCKZEUGWECHSLER

ELHA 6 Axis Horizontal Machining Center Xpert-K High-Performance Horizontal Machining Center The newly designed DEPO XPERT K horizontal machining centre offers a high degree of flexibility and above-average productivity. Description Horizontal BAZ The 6 axes are individually controllable. The HSK 100 holder makes it possible to clamp large tools and thus process large areas with high chip removal. Installed is a high-performance G30 fork head spindle with hydromechanical clamping system and a hybrid slewing bearing at top speed which allows extremely high speeds to be driven in order to achieve an optimal milling result even with the smallest tools. This fork head is equipped with a fully automated spindle change cycle, which makes it possible to replace the complete spindle in less than an hour. A hydraulic clamping device is installed for clamping components (effective table ...

The OE750 spark spectrometer and the new OE720 are metal analyzers with new, groundbreaking performance features. With them, you can analyze all elements found in metals at low detection limits and with state-of-the-art multi-CMOS technology. Ever stricter requirements, complex supply chains and the increasing use of scrap as a base material are forcing foundries and the metalworking industry to reliably detect the lowest ppm values of traces and accompanying elements. Until now, spark spectrometers in these power ranges have been unwrive for many. With the OE series, this has now changed fundamentally. Hitachi OE spark spectrometers analyze all essential alloying elements and extremely low levels of trace, accompanying and treatment elements in metals, e.B nitrogen in steel. The OE750 also covers rare applications such as oxygen in copper and oxygen, nitrogen and hydrogen in titan ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16 Operating hours: 5859 Technical data Distance between centres: 610 mm Swing over cross-slide: 300 mm Swing over bed: 450 mm Max. turning diameter: 525 mm Spindle hole: 52 mm Turning diameter: 210 mm Turning length: 525 mm Carriage: Longitudinal travel (Z-axis): 560 mm Transversal strocke (X axis): 135 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 6 Inner cone diameter: 32 mm Indexing time: 0.7 sec Taper in spindle:: JIS A2-5" Spindle speeds: stepless from: 60 rpm up to: 6000 rpm Taper in tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Feeds: stepless longitudinal from: 1 mm/min up to: 15000 mm/min transversal from: 1 mm/min up to: 12000 mm/min Spindle motor: 11  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 76500 Technical data Number of spindles: 2 Number of revolvers: 2 Swing over bed: 240 mm Spindle hole: 65 / 42 mm Turning diameter: 200 mm Bar diameter: 65 / 42 mm Clamping chuck diameter: 200 mm Turret carriage: Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Transversal travel (y-axis): +/-40 mm Carriage:: 2 Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Turret carriage: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 40-4000 rpm Main spindle: C axis (spindle,resolution): 0.025 ° Spindle speeds: stepless from: 25 rpm up to: 5000 rpm Torque max.: 200 Nm Back spi ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 18i-TB Operating hours: 9976 Technical data Number of axis total: 5 Swing over bed: 620 mm Turning diameter: 380 mm Bar passage: 52 mm Turning length: 540 mm Longitudinal travel (Z-axis): 600 mm Longitudinal travel (X-axis): 217 mm Transversal travel (y-axis): 101.6 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 12 Spindle speeds: 4000 rpm Power of driven tools: 5.5 kW Spindle nose: Inner cone diameter: 40 mm Taper in spindle: Camlock: A2-6" Collet bore: 52 mm Spindle speeds: stepless up to: 4500 rpm Back spindle:: A2-5" max. speed: 6000 rpm Spindle diameter: 45 mm Power of back spindle: 11/15 kW Rapid traverse:: 30 m/min Time under power: 13221 Hour Working time: 8781 Hour Voltage 50 Hz 3x: 400 ...

6-wheel mower with four-wheel drive, Farymann 2 cylinder diesel engine, hydrostatic drive, power steering. Hydraulic inclination adjustment, track width adjustment, spread arm with 180 cm double knife mower beam. Tyres 6x 4.50-14 AS.

Key data: 2000 , 9470

Turning diameter: 2000 mm Turning length: 9470 mm Turret positions: 0 Make: Ravensburg Type: KVH3 - 1000 CNC YOP: 2005 Max. turning Ø:2.000mm X-Axis:        780mm Z-Axis:        9.470mm Spindle bore:  150mm Speedrange:    600Rpm Spindle power: 80kW ATC / revolver:4 Length:        17.000 mm  Width:         6.500 mm  Height:        3.200 mm  Weight:        67.000 kg  Work load 15 t (20t) Hydrostatic guideways support Chuck 1300 mm Siemens 840 power line X/Z/C Axis C Axis 360.000 direct driven Sauter 4 position tool system CAPTO C6 2 x Steady rest 500 + 750 mm Milling attachment Sk40 / 1500 RPm / 4,5 kW

Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.

The JAFO FYN 50 ND CNC milling machine was produced by Jarocińska Fabryka Obrabiarek S.A. in 2007. The machine is equipped with the working table of dimensions (W x L) 500 x 1400 mm and CNC control HEIDENHAIN. The numerical control allows to work in an automatic cycle with a circular or linear interpolation in three-dimensional space. Machine feeds in the X/Y/Z axes are 800 mm, 500 mm and 500 mm respectively. The CNC milling machine weighs 4500 kg. A fourth axis can be connected to the machine control panel. Technical specification of the JAFO FYN 50 ND machine - CNC control: HEIDENHAIN - working table surface (W x L): 500 x 1400 mm - feed rates in the X/Y/Z axis: 800/500/500 mm - stepless feed rate adjustment - spindle nose: ISO 50 - stepless regulation of spindle rotation speed - metering lubrication system - guide rails lined with TURCITE B” material - hydromechanical q ...

Max blade diameter: 450 mm Weight: approx. 700 kg Hydropneumatic saw blade feed via 2 manual operation Pneumatic material tensioners Minimum quantity spraying device Table rotatable on both sides with rest points at 45°

Kiln 1200C inner dimensions 1x1x2m 2 heating zones auto door Fours pour la fonderie Fours pour la forge et le matriçage Fours pour les traitements thermiques Equipements périphériques Fours pour verres feuilletés Fours Basse température Fours à passage continu Fours céramique Fours à creuset pour fusion et fusion-maintien des métaux non ferreux Creusets pour fonderie Fours pour cuisson et décirage de carapaces de fonderie à cire perdue Fours de forge standard Fours à creuset Fours Haute température Fours de laboratoire Fours de trempe Fours de recuit chauffé à l'électricité chauffé au gaz four standard chauffés à l'électricité four standard chauffés au gaz Fours à longerons mobiles Fours de thermoformage Fours de séchage Fours de polymérisation Fours pour le verre Fours Fours à sole tournante de bombage Fours de revenu  ...

Tooth edge deburring machine make RAUSCH type GRATOMAT GR 300 HV - HORI - FBMachine -No: 4337, built in 1998milling unit:- Hydropneumatic, retracting with additional pneumatic slidexa0xa0 (110 mm quick-stroke, 50 mm working stroke)Druckluftfrässpindel:- 950 mm rpm- right or left rotationBrush unit:- Retracting hydropneumatically- stroke 0 - 100 mm- 1.1 kW- 2800 rpm- Collet diameter 12 mmClamping unit:- Pneumatic three-jaw chuck SCHUNK diameter 160 mm- Possible use for bevel gear pinion shafts with number of teeth 7 - 11xa0xa0 for top or foot machining in full-stroke modeAir consumption: 600 l / minCurrent type: 400 V / 50 HzTotal power requirement: 5 kWSpace required: 3900 x 2900 x 2600 mmDimensions (LxWxH) approx: 2600 x 1800 x 2400 mmWeight approx: 1880 kgWith- CE marking- Fully automatic brush adjustment- full protection cabinused, in good conditionPrice on request.Delivery: ex wareh ...

High precision turret lathe manufactured by SCHAUBLIN type TR 102 HPMasch. -No: 167073, year of construction 1966controlled hydropneumaticallyTechnical specifications:Tip height: 102 mmBed length: 900 mmDistance between headstock and turret: 300 mmCollets passage: 22 mmNumber of places in the revolver: 6Bore diameter: 20 mm6 spindle speeds: 840 - 3000 rpm.Feed rates: 0.02 - 2 mm / minFast delivery: 8 m / minrequired air pressure: 5 - 7 atmAir consumption: 5 - 10 m3 / hDrive power: 2.5 HPWeight approx: 670 kgExternal dimensions: 1930 x 590 x 1680 mmWith- Collet insert- bar feed- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO ...