hydraulic punching machine used for sale

Universal flaring device with hydraulic spindle KS TOOLS 122.1290, case

Hydraulic tilting table Working dimensions: 4.10 m x 12.05 m Transport dimensions: 4.50 m wide, 12.20 m long, 1.30 m high Surface material: WOOD 9 vibrators E-Distribution box and frequency converter Hydraulic power unit

G+K spotting press HPV 60 S very good condition ! technical data see picture... available at short notice from location.

Key data: 3100 mm, 6 mm, 750 mm

Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6 mm Back gear gauge travel: 750 mm Year of construction: 2002 Motor power: 7,5 kW Number of sheet presses: 18 SP8 Command Blades with 4 cutting edges Voltage: 380 V

LOIRE SAFE Hydraulic Press – High-Performance System for Tooling and Heavy Forming Applications This high-performance hydraulic press, designed in a rigid 4-column portal frame construction, is ideally suited for demanding applications in toolmaking (tryout / spotting) as well as large-scale forming operations. The stress-relieved welded structure ensures maximum rigidity and long-term process stability. The machine is equipped with three main cylinders and a multi-cylinder parallel control system, achieving high repeatability in the range of ±0.1 mm. The powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approx. 450 bar, delivering both precision and high pressing force. Control is handled via a Siemens S7-317F PLC combined with servo-controlled axes (Rexroth MLC) and visualization through Siemens WinCC. This setup enables fully  ...

ATTENTION: A larger forklift has to be organized for the application! Weight probably 4.5t Auction-ID: A7-47274-22

Hydraulic oil pressure tester, with 10hp AEG electric pump Auction-ID: A7-47100-8

ATTENTION: The machine must be dismantled before transport out of the hall. For this, a larger forklift must be organized! Auction-ID: A7-47274-21

Mechanical-hydraulic governor to control diesel, gas, or dual-fuel engines, or steam turbines. These regulators (usually referred to as \"UG-8\") are available in UG dial or UG lever configuration. UG quadrant regulators are particularly suitable for constant speed applications. UG lever regulators are widely used for variable speed control. Auction-ID: A7-47100-2

Tester or hydraulic station with tools for splitting booms Auction-ID: A7-47100-12

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: servohydraulic   frame design: H-frame, tie rod   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 1100 to   stroke: 130 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 330 to   stroke: 40 mm V-RING   nominal force: 500 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 960 mm   lower table (front-back): 960 mm   upper table (left-right): 960 mm   upper table (front-back): 960 mm   shut height max.: 470 mm OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 16 mm   coil weight max.: 8 to   feedstock transport direction: left to right COIL CHAIR   coil weight max.: 8 to   stroke: 700 mm DECOILER   coil weight max.: 8 to   max. diameter of coil: 1800 mm   m ...

For sale here is a hydraulic power unit from Pregler Bosch Motors from ABB see nameplates Best view Auction-ID: A7-47308-21

2x mobile, 1x Hycon, frame-mounted Auction-ID: A1-46933-113

Serial number 531B093 for maximum material cross-sections see photographed nameplate incl. punching tools as shown in the pictures with length stop max. stop length approx. 2000 mm Reference: Prologtec Lot 1 Auction-ID: A7-46763-125

Auction-ID: A1-46933-46

max. working pressure: 0.6 MPa Air consumption: 30 l/stroke Stroke: 20 mm Serial number: 792-1017 Table dimensions: 300 x 300 mm Attention: the press tool is probably not included in the scope of delivery Reference: Groven - Lot 11 Auction-ID: A7-46763-312

Sold with tray. 8 x 15 tons, 2 x 50 tons, 1x 100 tons. Auction-ID: A1-47254-126

Hydraulic Press for Diamond Cutting Disc 60phi500phi Plate Furnace Medium Pressure Forming Machine Instruction Manual 1988.6.25 Kyodo Seiki Co., Ltd. Postal:211 518-4 Ogura, Saiwai-ku, Kawasaki-shi, Kanagawa, Japan TEL: 044(544)6925 FAX: 044-541-3546 1. Machine Specifications 1) Maximum Output: 60,000 kg 2) Max Output Pressure: 150 kg/cm² 3) Effective Stroke: 250 mm 4) Furnace Dimensions: - Horizontal Side: 8kw × 2 - Rear Side (With Door): 8kw 24kw 5) Heating Temperature: 860°C 6) Internal Dimensions: W650 mm × N 450 mm ×D 750 mm 7) Power Input: - Main Pump: 2.2 kW × 4 pole - Auxiliary Pump: 0.4 kW × 4 pole 8) Oil Tank Capacity: 120 L (ISO.VG32-56 equivalent hydraulic oil) 9) Temperature Control: Silister P.I.D Control 10) Vacuum: 4-stage 415V - 50Hz 2. Machine Installation 1) Install the press body on a flat surface. Secure it with anchor bolts if possi ...

Cold plate press of useful measures 2500x1300 mm 4 pistons of diameter 80 mm This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47127-9

FEM3 mount, for forklifts with 2,500kg-5,000kg load capacity on pallet for loading into trucks FEM dimension 3A Fork length 135-200 mm Auction-ID: A1-47467-1103

HACO TSX 3006 hydraulic guillotine shears • Cutting capacity: 6 mm • Cutting length: 3050 mm • Rear gauge: 750 mm • Motor: 7.5 kW – 380 V / 3 Ph + T + N • Throughput: 8–14 strokes/min • Front angle gauge: 1000 mm • Digital positioner• Serial number: 803317 • Dimensions: 3800 × 1650 × 2700 mm • Weight: 4500 kg • Condition: used, good visual and functional condition Auction-ID: A1-47421-20

COLLY 1406S hydraulic press brake• Cybelec DNC 60 numerical control for precise axis adjustment • Leuze Electronic ML500 optical safety sensors • Prismatic ram guidance for high precision • Double foot pedal and hydraulic control side panel • Adjustable front stops, integrated sheet metal support • Complete tooling: mounted punches and dies • Robust mechanically welded structure, suitable for steel bending, stainless steel, aluminum • Dimensions (mm): approx. 3000 × 1800 × 2500 • Weight (kg): approx. 8000 • Condition: used, good visual working condition• Year: 1972 Auction-ID: A1-47421-11

Hydraulic shear COLLY 1042 • Robust French manufacture – Villeurbanne Hydromechanical Constructions • Cutting length: approx. 3000 mm • Working pressure: 141 bar • Engine power: 20 hp (~15 kW) • Side hand control with control box and mechanical lever • Table with holding fingers and front stops • Power supply: 380 V / 50 Hz / 3 Ph • Heavy mechanically welded structure, rigid frame• Serial number: 734 • Dimensions (mm): 3800 × 2000 × 2000 • Weight (kg): approx. 7500 • Condition: used, good overall visual condition• Year: 1978 Auction-ID: A1-47421-10

No nameplate present - Detachable teeth - Spare teeth Auction-ID: A3-43543-18440

Kaiser SPGL2E heavy-duty flatbed semi-trailer, 3 axles, GVW 33,000 kg, entry into service 26/04/2000, equipped with a HIAB 175-3 hydraulic crane with 3 extensions. Maximum range close to 16 m. Maximum lifting capacity of approx. 6.3 t at short reach. Air suspension. Belgian technical inspection valid until 17/01/2027. Platform length approx. 8.85 m. Auction-ID: A3-44487-38085

COLLY PS PRO 125/3 hydraulic press brake • Force: 125 T • Bending length: 3100 mm • Upright passage: 2600 mm • Gooseneck: 210 mm • Stroke: 310 mm • Motor: 9 kW – 380 V / 50 Hz / 3 Ph • Delem DA24E numerical control (3 axes Y1, Y2, X) • Complete tooling line (punches and dies) • Dimensions: 4300 × 1670 × 2750 mm • Weight: 9500 kg • Condition: used, good visual and functional condition• Year: 1995 Auction-ID: A1-47421-14

Tilting table for welding and assembly of metal structures. Equipped with a perforated surface for fixing parts by means of tools and clamping systems. Hydraulic drive by means of several cylinders distributed over the structure. Suitable for assembly, welding and fabrication operations of large metal assemblies. Manufacturer identified as RAMARCH. Auction-ID: A7-47328-37

SAGITA 2500×6 hydraulic shear • Robust shear for cutting steel and stainless steel sheets • Cutting length: 2550 mm • Cutting capacity: 6 mm • Rear gauge: 1000 mm • Manual adjustment of blade clearance and cutting angle • Cutting speed: 6 to 10 strokes/min • Motor power: 7.5 kW • Front stop 1000 mm square • Dimensions: 3140 × 1960 × 2000 mm • Weight: 6000 kg • Condition: used, good overall visual condition Auction-ID: A1-47421-9

Additional information: Delem DA 66W.8-axis Y1 Y2 X1 X2 Z1 Z2 R1 R2 Tool line. Technical data: Power: 125 t Folding length: 3100 mm Upright passage: 2600 mm Gooseneck: 210 mm Engine power: 9 kW Apron stroke: 220 mm Year: 2004 Dimensions: 4300 x 1670 x 2750 mm Weight: 10,000 kg Auction-ID: A1-47421-1

PROMECAM STPC 204 hydraulic press brake • Force: 200 T (2040 kN) • Bending length: 4100 mm • Passage between uprights: 3500 mm • Gooseneck: 400 mm • Stroke: 220 mm • Motor power: 17 kW • Delem DA-65W retrofit numerical control with 2D color graphics • 7 axes: Y1, Y2, X, R1, R2, Z1, Z2 • 2 front consoles on linear guides • New tooling line (punches + dies) • Power supply: 380 V / 50 Hz • Dimensions (mm): 4495 × 1885 × 3250 • Weight (kg): 14,200 • Condition: used, excellent visual condition• Year: 1987 Auction-ID: A1-47421-8

Hydraulic quick coupler for excavator, suitable for quick and safe change of attachments such as excavator buckets. This type of quick coupler is mounted on the arm of the machine and allows for a manual pin change of attachment, which significantly increases efficiency. Auction-ID: A3-43543-13024

Power: 7.5 kW Working parameters: Cutting capacity 6 mm – Cutting length 4100 mm – Rear gauge 750 mm – Output 13/18 strokes/min Equipment included: Angle stop length 1000 mm – Digital control MDII – Manual adjustment of the clearance between blades Year & Manufacturer: 2010 – KORPLEG Dimensions (mm): 5000 × 2850 × 2250 Weight (kg): 9000 Remarks: Serial No. 34090910 included in the description. Auction-ID: A1-47421-17

Youtube function video: https://youtube.com/shorts/D1vBDS6kQvo FEM3 mount, for forklifts with 2,500kg-5,000kg load capacity on pallet for loading into trucks FEM dimension 3A Fork length 135-200 cm Auction-ID: A1-47467-1108

Youtube function video: https://youtube.com/shorts/OBVDwbD3IUk FEM3 (approx. 50cm): Fits any forklift with a payload of 3,000-5,000kg Fork length: 120-200cm Auction-ID: A1-47467-1174

Jean PERROT CSE 3006 hydraulic shears • Cutting length: 3050 mm • Cutting capacity: 6 mm • Rear gauge: 1000 mm • Adjustment of the clearance between blades and the cutting angle controlled by numerical control • Front angle gauge: 1500 mm • Cutting speed: 6 to 10 strokes/min • Motor: 7.5 kW • Serial number: 13541995 • Dimensions (mm): 3740 × 1960 × 2000 • Weight (kg): 6000 • Year: 1991 Auction-ID: A1-47421-23

diameter 40 cm length 4.5 meters Auction-ID: A7-47346-49

BLS Lamination Press has been rebuilt to meet your lamination needs. Specifications: Tonnage: 20 Ton Max Temperature: 150°C Electric Heated Platen Table Size: 600 mm x 600 mm Daylight: 425 mm Open/Closing Speed: 10 mm/s Omron PLC HPU

Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible.

Bed Size:Left to Right 393mm 15.5 in Front to Back 393mm 15.5 in Daylight Between Tables 559mm 22 in Daylight Between Heated Platens 353mm 13.9 in Heating Electrical Induction Heated Platen Sizes(Up To) 355mm x 355mm 14″x14″ Max Working Platen Temperature 220°C Main Ram Stroke(Up To) 355mm 14 in Hydraulic Circuit Pressure 70 Bars 1000 PSI Main Ram Pressing Force 41 T 40 Ton Main Ram pull back 2.2 T 2.2 Ton Closing Speed(Up To) 150mm/s Opening Speed(Up To) 120mm/s

Features: 1 brush 1500mm 2X worm/auger 1500mm Hydraulic connection Auction-ID: A1-40141-200

Equipped with: guide wheel, hydraulic system, attachment for H clinkers Auction-ID: A1-40141-250

For ITR hydraulic hammer; Auction-ID: A7-47288-45

Equipped with: Hydraulic control, With plate for shovel/enricher/tractor. Hydraulic tree harvester/clod harvester attachment for Pazzaglia FZ120 AV with rotatable lifting head, hydraulically operated clod spade, adjustable root ball diameter up to approx. 120 cm, integrated clamping arm for log fixation, heavy steel harvesting knife construction and suitable for cutting, moving and planting trees with root ball. Swivel lifting head ±30°, suitable for root ball diameters of approx. 25–120 cm Auction-ID: A1-40141-35

Equipped with: extendable tracks from 90 to 110 cm, Pazzaglia FZ120 AV self-propelled hydraulic tree harvester/root ball harvester from 2016 with 2,368 operating hours, Kubota 4-cylinder diesel engine of 35.6 hp (26.2 kW), track drive with 2 speeds (0–4 and 0–8 km/h), electro-hydraulic joystick control, adjustable track width, AV vertical lift, rotating lifting head ±30°, suitable for root ball diameters of approximately 25–120 cm, Dimensions approx. 241 × 90–114 × 226 cm and weight around 2,000–2,150 kg. 7-pin plug. Auction-ID: A1-40141-34

Equipped with: Riwal hydraulic sweeper with three-point coupling, equipped with central sweeping brush, hydraulic drive, support wheels, adjustable working height and side guide, suitable for sweeping yards, industrial floors and pavements Auction-ID: A1-40141-176

With new spare parts Auction-ID: A7-47288-44

Equipped with supply line, washing line, collection immersion tank / equipped with compressor / including: 2 various metal tables and mobile pallet stand Auction-ID: A1-46783-1013

For ITR hydraulic hammer; Auction-ID: A7-47288-46

Equipped with: Hydraulic driven discs, removable wheels, CM Regero Industries type 775-12-10, year of construction 2020, serial number 775039, trailed hydraulically folding plastic/fleece layer. with several disc elements, depth guide wheels, transport chassis and three-point coupling, manufactured in France. You can use it to lay plastic and elder cloth. Auction-ID: A1-40141-68

Equipped with: New hydraulic sweeping broom, Avant mount, machine width 1350mm, working width 1050mm, Auction-ID: A1-40141-271