hiw used for sale

Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons -Coupling: pneumatic -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hiwell batter mixer II, Hiwell DJJ100-II batter mixer utilizes ingenious mixer to evenly combine water and batter. This stainless steel mixer is applicable for high viscosity batters such as Tempura batter., Advantages, 1. Our parry battering machine involves utilization of cutting-edge control system, thus realizing repeatable operation cycles of high-speed mixing, low speed mixing and alarm on application of batter. Therefore, batter is prevented from sedimentation., 2. Mixing tank in this fruit battering equipment is endowed with separation layer, which is aimed to keep batter temperature between 10-20℃ by ice or cold medium., 3. Our batter mixing equipment comes with batter output pump, which offers excellent connectivity to battering equipment to form batter feeder., 4. Thanks to reliable protection system and Siemens electronic components, thisfruit processing equipment is operat ...

Hiwell flattener 600mm wide

Hiwell batter and breading line

General SKU306Y630 MakeHiWay Serial24-395-01 Main Features Motor1.5 KW Length5000 mm Inlet diameter72 mm Specified Features - Vertical screw conveyor Tube-modelø 72 mm With hopperdosing screw Inletø 250 mm Motor1,5 kW (400 V, 2950 rpm) Screw speed± 300 rpm Outlet height5 m Conveying height5,3 m MaterialStainless steel 1.4301 (304) General Year of construction2024 Mounted in framecheck LocationBarneveld Floorspace1,5 x 1,5 m Total height5,5 m Weight2000 kg CEcheck Extra information Extra SpecificationsIncluded: Big-bag unloading station with - steel frame - chain hoist - product receiver with dosing screw StarchRubberVertical screw conveyorsAgrochemicalsCatalysts & fillersPaper & otherOrganicsSugarAnimal feedPlastic & rubberMinerals & inorganicPowdered foodsHiWayIndustries > Food & Feed > StarchIndustries > Chemical > RubberConveying systems > Vertical screw  ...

The linear axes have been in storage for two years and are still in unused new condition. New price currently is 1820 € net per piece. We also have linear axes from Festo : 14x Festo ELGA-TB-RF-70-320-0H-S-P0 23x Festo ELGA-TB-G-70-320-0H-P0 If you are interested, please contact us.

With Nissin SLP8220-1.1AA lobe pump, Capacity: 200 litres, Mixing speed: Variable, Power: 3 x 380V, 50Hz, 3kW, Dimensions: 1350 x 110 x 1550 mm, Weight: 480 kg

Battermixer with variable speed, 0 - 117 RPM, for mixing tempura batter., For products with higher viscosity., Mixer: 200 litres, Pump: Dgedong SCP-10422 vane pump, Power: 3 x 380V, 50Hz, 3kW, Dimensions: 1300 x 900 x 1800 mm, Weight: 200 kg

With additional infeed conveyor of 630 mm in length., Belt speed variable adjustable., Independentley in speed adjustable take-over outfeed conveyor., Including blower for excess coating., Belt width: 600 mm, Product height: max 55 mm, Power: 3 x 380V, 50Hz, 2.1kW, Dimensions: 3150 x 1200 x 1350 mm, Weight: 400 kg

Battering machine with variable adjustable belt speed., Belt width: 600 mm, Pump: Gedong SCP-10418 flat vane pump, Power: 3 x 380V, 50Hz, 2.45kW, Dimensions: 1800 x 1150 x 1350 mm, Weight: 300 kg

Battering machine with variable adjustable belt speed., Belt width: 600 mm, Pump: Gedong SCP-10418 flat vane pump, Power: 3 x 380V, 50Hz, 2.45kW, Dimensions: 1800 x 1150 x 1350 mm, Weight: 300 kg

Table length 1300 mm Table width 800 mm Lifting height 1020 mm Load capacity in kg 2000 kg Lifting height min. mm Connection voltage 400 V Total power requirement 0.75 kW Lifting speed - upwards empty sec. Lifting speed - downwards empty sec. Machine weight approx. 0.3 t Dimensions approx. 1.3 x 0.8 x 0.4 m Condition: functional Auction-ID: A7-51438-415

Key data: 100 t

Hydraulic flat, bar. Profile and angle steel shears with notching device and hole punch Make: Muhr + Bender (Mubea) Model No.: HIW 1000 Year of Make: 1990 -Punching force: 1000 KN = 100 tons. -Hole punch: Ø 40 mm in 22 mm material -Angle steel shears 90°: 160 x 16 mm -Flat steel shears: 600 x 15 mm -Notching device: sheets 13 mm Weight: 2550 kg Visually good condition Technical good condition Accessories: Punches and matrices see photo no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm -Weight: 1283 kg

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23294 Specifications: - Flat steel shears - knife length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Sectional steel shears - L- steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Bar steel shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Punch punch - punching force approx. 750 KN - - Infinitely variable stroke 0 - 70 mm - Perforates in steel up to 30 mm Ø in 20 mm - Projection 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - With: - 2 E. foot switches for two separate workstations - Slewing ring

Punching force: 750 kN (punches e.g. 30 mm in 22 mm material), with search device via foot switch for punching Projection: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on flat steel shears Support table on the punching side Two separate foot switches for the punching and shearing side, so that independent punching and shearing can be carried out Assortment of tools is included in the price

Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price

table length: 1300 mm table width: 800 mm stroke height: 1020 mm weight max. in kg: 2000 kg : mm connected load frequency: 400 V total power requirement: 0,75 kW stroke speed - idle stroke upwards: sek. stroke speed - idle stroke downwards: sek. weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,3 x 0,8 x 0,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Specifications / Technical data S-1400/T 3-axis CNC-portal-machine and engraving machine (Attention: Pictures show the High-Z S-1400 with trapezoidal thread spindles, this differs exclusively by the spindles . With the T-variant of the high-Z CNC fraes machine, you acquire old-fashioned technology with the certain I-meat in TUeV-certified quality (EMC). The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T portalfraes machine achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can s ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

KENYO VS80160 5-axis Machining center with CE Producer: Nanjing Kenyo Precision Machine Manufacture Co., Ltd YOM 2015 Simultaneously 5 axes Total Installed Capacity 22.4 kW 5-Axis vertical Milling machine for blanks up to 1000-1500kg Stroke X/Y/Z- 1600/800/800 mm Working table size 800x1800 mm Diameter of NC swivel table axle C 630 mm Rotating mass clamping force 4000 Nm Spindle clamping force: ≥ 2000 Nm Maximum mass load 2000 kg Spindle diameter 170 mm Spindle rotation angle- ± 110 Degree Tool Store Type BT40 ISO Tool magazine 24 pcs Maximum spindle rotation speed 10.000 rpm Spindle power 15 kW Ball-Screw pair HIWIN Spindle Hesheng Ball Bearings NSK Positioning accuracy ≤ X/Y/Z: 0.015 mm, C: 0.002 degree, B: 0.002 degree Repeat accuracy ≤ X/Y/Z- 0.01 mm, C:0.0015 Degree, B:0.0015 Degree Quick move: ≥ 10000 mm/min Milling speed: ≥ 1 to 8000 mm/min OC ...

CNC Router and 3D engraving machine T-Rex 0712: Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 17.000 mm/min Operating speed max. ca. 12.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table1650 x 880 mm Travels: X=1200mm; Y=700mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions  ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

KELLER K-Roll ROTO 2 hot foil stamping machine was built in 2018 in Poland by KELLER poligrafia dla przemysłu Sp. z o. o. Sp. K. The machine is used in the printing industry for printing cylindrical parts by hot stamping. Hot stamping is a special printing method in which a special foil is transferred onto the material at high temperature and pressure. This results in gold- or silver-plated patterns, ideal for enhancing many products, such as business cards, diplomas or invitations. The KELLER K-Roll ROTO 2 performs the entire process fully automatically. Workpieces are fitted into the holders of the rotary table by means of conveyors and manipulators. The work table rotates two positions at a time, transferring them to the following de-ionisation and printing stations. At the end of the cycle, the parts are ready to be picked up on the outfeed conveyors or slide down the ramp into t ...

KELLER ScreenROTO 2 screen printing machine was built in 2018 in Poland by KELLER poligrafia dla przemysłu Sp. z o. o. Sp. K. The machine is used in the printing industry to apply print to the surface of cylindrical parts with a maximum length of 150 mm. The screen printing is performed by the KELLER ScreenROTO 2 fully automatically. The workpieces are fitted into the holders of the rotary table by means of conveyors and manipulators. The work table rotates two positions at a time, transferring them to the following deionisation, surface activation, printing and UV drying stations. Once the cycle is complete, the parts are ready to be picked up on outfeed conveyors. The KELLER screen printing machine is distinguished by a range of modern components from renowned brands, which guarantee high productivity over many years of intensive use. The offer also includes extensive equipment, co ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1224 Drive: 3 buerstenlose brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse clearance maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 2800 x 1340 mm travel distances: X=2400mm; Y=1200mm; Z= 130 mm contact sensors / reference switches / limit switches on all axes Double secured emergency trigger energy chains for clean cable flush Total mass with motors : LxWxH approx. 3070 x 1800 x 1420 mm Fraes ...

ACCTEK AKM2030 CNC router was built in 2020 in China by Jinan Acctek Machinery CO., Ltd. The machine is designed for the precise milling, cutting and engraving of parts made from materials such as wood, MDF and plastics. Its large work area, combined with a stable design, makes the machine ideal for both one-off projects and mass production. All machining processes are performed using a high-performance electro-spindle with a maximum speed of 24000 rpm. The rotational speed and torque are controlled by an inverter, allowing the operating parameters to be adjusted to suit the current task. The electro-spindle is also equipped with a cooling system, which helps maintain stable parameters during intensive use of the machine. Individual axes are driven by high-torque stepper motors. These move along precision linear guides, ensuring accurate positioning and repeatability of the parts p ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OE 1,5kW / VF1530-1500W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 1.5kW - Energy requirements: 12.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 12.0mm, maximum thickness 16.0mm - Stainless steel: Recommended thickness 5.0mm, maximum thickness 6.0mm - Aluminum: Recommended thickness 3.0mm, maximum thickness 4.0mm - Brass: recommended thickness 2.0mm, maximum thickness 3.0m ...

Many of our machines are available from stock. Call us to find out more. Fiber Laser Cutter FLV-3015-OE 3kW / VF1530-3000W Technical parameters - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable positioning accuracy of X and Y axes: ±0.03 mm - Maximum speed: 60000 mm/min - Maximum acceleration: 0.7 G - Maximum load: 1200 kg - Power: 3.0 kW - Power requirement: 24.0 kW - Source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting thickness - Black steel: recommended thickness 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, maximum thickness 10.0 mm - Aluminum: recommended thickness 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness 5.0 mm, maximum thickness 6.0 mm Construction - Construction type: welded - Number of support legs: 8 - ...

Machine configuration 1. 6kw Raycus Fiber Laser Source 2. HSG Laser Cutting Head P10 3. HSG Alpha T-Bus Control 4. HSG-NEST nesting software 5. Monitor with touch function 6. Aluminum crossbeam 7. Hiwin Linear Guide 8. Inovance servo motor and driver 9. SMC Oxygen Control Valve 10. Collision protection 11. Automatic lubrication 12. Ergonomic remote control 13. WLAN / LAN connection 14. Electronic components from Schneider, Eaton and Noark 15. Pneumatic components from Aventics 16. Fault monitoring of the main machine, laser source as well as chiller 17. Cutting gas low pressure alarm function 18. Water Chiller 19. Extraction system Interchangeable table system: 1500mm x 3000mm Further configurations are available with regard to the fiber laser power output and the processing area

CORMAK LF3015LNR laser cutting machine was built in 2021 by the Polish company CORMAK. The machine, which is designed for precision cutting of tubes, sheets and profiles, uses advanced FIBER technology to machine even the hardest materials of various thicknesses. This technology is a much more cost-effective alternative to CO2 machines of similar power, while also guaranteeing low operating costs and trouble-free operation for many years of use. The workpieces are machined with a reliable RAYTOOLS cutting head with autofocus and protective glass. It moves along a sliding gantry made of aircraft aluminium. The installed software automatically adjusts the focus lens from -10 mm to +10 mm, ten times faster than standard manual adjustment. Both the collimator lens and the focus lens are equipped with a heatsink to reduce the temperature of the cutting head and thus extend its service life ...

FALCON S4020 6 kW fiber laser was built in 2025 in China by FFG CHINA CO., LTD. The machine was launched in March 2026 and has been in operation for a small number of hours. It is covered by a valid warranty until February 2031. This fibre laser belongs to the FALCON S Masterline series, developed for users seeking high performance while keeping operating costs low. The machine is designed for the precise cutting of large sheets of metal with a maximum thickness of 30 mm. Cutting is performed using a fiber optic beam generated by a high-performance ULTRON 6 kW laser source. The narrow focal spot, combined with high energy density, ensures precise material machining with minimal thermal deformation. The fibre laser technology also offers greater energy efficiency and performance compared with other cutting methods. The FALCON S4020 features a BOCHU 3D cutting head with a range of us ...

pressure: 60.0 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm back stop - adjustable: 500 mm control: DA 66T oil volume: 150 ltr. voltage: 380 V engine output: 7.5 kW Weight: 4320 kg range L-W-H: 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=KRifrqTgkVU ------------------------------------------------ SPEED BEND PRO CNC press brake: increased installation height increased cylinder stroke and increased bending beam speeds ------------------------------------------------ Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T graphics/touchscreen ...

BAIWEI BW-G3015 1,5 kW fiber laser was built in 2019 in China by ZHENGZHOU BAIWEI CNC MACHINERY SHARES CO., LTD. The machine, designed for the precise cutting of sheet metal with a maximum thickness of 14 mm is ideal for both unit and series production. Cutting is performed using a stable fiber beam generated by a RAYCUS 1,5 kW laser source. The fiber laser technology offers greater energy efficiency and higher performance compared to other cutting methods. The BAIWEI BW-G3015 is equipped with a RAYTOOLS cutting head with a range of useful features. The autofocus automatically adjusts the focal position to the thickness of the material being machined. An anti-collision system detects obstacles, reducing the risk of the head colliding with the workpiece. These solutions enable efficient cutting while maintaining a high level of machining accuracy. All process parameters are programm ...