high speed press used for sale

The X-MET8000 handheld XRF devices offer high performance for the reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy are required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. Excellent ergonomics Lightweight (only 1.5 kg), compact, ergonmomic. You can use the X-MET for a lo ...

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed for durability. It offers reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides precise and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially with extensive inventories. Low operating costs Because Vulcan is a laser device, employees don't have to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military standards for robustness (MIL-STD-810G). It also comes with a 3-year warranty. Prove ...

The OE750 spark spectrometer and the new OE720 are metal analyzers with new, groundbreaking performance features. With them, you can analyze all elements found in metals at low detection limits and with state-of-the-art multi-CMOS technology. Ever stricter requirements, complex supply chains and the increasing use of scrap as a base material are forcing foundries and the metalworking industry to reliably detect the lowest ppm values of traces and accompanying elements. Until now, spark spectrometers in these power ranges have been unwrive for many. With the OE series, this has now changed fundamentally. Hitachi OE spark spectrometers analyze all essential alloying elements and extremely low levels of trace, accompanying and treatment elements in metals, e.B nitrogen in steel. The OE750 also covers rare applications such as oxygen in copper and oxygen, nitrogen and hydrogen in titan ...

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed to last. It provides reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides accurate and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially for extensive inventories. Low operating costs Because Vulcan is a laser device, employees do not need to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military ruggedness standards (MIL-STD-810G). It also comes with a 3-year warranty. Proven It is ...

XMET8000 handheld spectrometer for quick and easy elemental analysis and many other possibilities. The X-MET8000 handheld XRF instruments offer high performance for reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy is required. Friendly The intuitive, icon-based user interface requires minimal operator instruction.  ...

Optical Emission Spectrometers (OES) are characterized by the fact that they provide complete chemical analysis, even of critical alloying elements at low detection limits, which handheld XRF and LIBS devices cannot achieve: carbon, phosphorus, sulfur, boron, arsenic and tin in low-alloy, stainless steels and nitrogen in duplex steels. For this reason, spark spectrometry is the world's most reliable and widely used method for creating and verifying MTR's (Mill Testing Reports). Our instruments also meet the world's most stringent PMI testing requirements for metallurgical alloy chemistry, including API 5L testing, API RP578, ASME Section IX B& PV, ISO 17025 and A2LA standards.

Complete Chonglee High tenacity yarn ( Both PET and PA) spinning lines available for sale, manufactured by Chonglee in 2012, consist of 7 individual line, 4/8 ends winder, chuck length, 1200mm, 4/8 ends changable,10 / 8 hot godets, each pos. has 8 packs & spinnerets, 90mm,5.0 meter, can spin 400-1500d yarn, strength 9.2-9.5 gpd, Total 27 positions. from extruder to winder. Stopped 2 months, just complete refurbished last year, very good condition, can be soldl separately; A. line: with 6 pos, 150mm extruder, 10 godets B. line with 4 pos., 135mm extruder, 10 godets C. line: with 4 pos.135mm extruder, 10 godets D. line: with 1 pos.105mm extruder, 10 godets E. line: with 6 pos.150mm extruder, 8 godets F. line: with 3 pos.120mm extruder, 8 godets G. line: with 3 pos.120mm extruder, 8 godets Serious buyer contact us. serious buyer contact us.

This device is calibrated for rapid detection of metals in scrap and recycling. Within a second, you can see V2A, V4A, chrome steel, bronze, gunmetal, aluminum alloys and much more. The device is not suitable for precious metals or catalysts. The device has only been in use at the customer for about 3 years and is in good condition. The device includes two batteries for about 8 hours of operation each, a charger with charging cradle and the transport protective case. In contrast to newer devices, the internal camera is also unlocked here, so that you can save images of the measuring range in the device. The device has received all available software updates and can be used in conjunction with the smartphone app, via cloud computing or even as a single device.

Technical details Manufacturer: GEA Niro Soavi Model: Ariete NS3110H Type: Piston homogenizer Viscosity : < 500 cP Maximum particle size: up to 500 microns Operating temperature: < 90?C Execution : Sanitary / aseptic Max. capacity: approx. 15,000 L/h (variable capacity from 5,500 to 15,000 L/h) Flow rate: variable / fixed / multiple Maximum working pressure: 200 bar Maximum back pressure: 5 bar Minimum in feed pressure range: 4 to 6 bar Motor power (supply required): 110 kW Power supply: 3 ph / 400 V / 50 Hz Water supply: min 2 bar Air supply : min 6 bar Product temperature : < 90?C Cleaning temperature : < 140?C Cleaning cycle : 30 min Sterilisation temperature : 140?C Number of stages / homogenisation level: 2 Plunger diameter: 85 mm Plunger stroke. Piston stroke : 100 mm Options added by the manufacture ...

Manufacturer : Collette (GEA) Model: Gral 600 Year : 1983 Type : High-Shear Mixer Granulator Products : Simultaneously mixes dry powders, humidifies these powders and wet granulates them Gross capacity : 600 L Nominal capacity : between 1/2 and 2/3 gross capacity Weight : 3000 KG Mixer motor power : 37 KW Granulator motor power : 7,5 KW Transmission : belts Mixer speed : 95 and 135 rpm Granulator speed : 1500 and 3000 rpm   Valve discharge height : 1030 mm Overall dimensions: 2850 x 1360 x 3200 mm (documentation)

Inner dimensions: 440x540x700mm, max. operating temperature: 1050°C, connected load: 21kW, weight: 490kg, including spare parts, accessories and documentation, available in August 2023.

Laboratory Chamber Furnace with controller, T.max °C: 1200, 3.7kW, Inside dimension in mm (wxdxh) 250 x 400 x 250 equals 25.0 liters.

max. plate size: 625 x 550 mm max. speed plates: 30 /h resolution of impression: max. 2540 dpi Violet Laser incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: GEA Collette Model: GRAL 600 Type : Granulator / powder mixer Available bowls : 2 Materials : Stainless steel Total volume: 600 liters Useful volume : 1/3 - 2/3 total volume   Mixing : Mixing power: 50 HP - 37 KW 2 speeds: 95 - 135 rpm   Granulation Agitator power: 10 HP - 7.5 KW 2 speeds: 1500 - 3000 rpm   Power cabinet with variable speed drive ATEX class: EEx de IIC T4 B3 documentation available Application: dry mixing / low or high shear wet granulation by spraying / melt granulation / production of e?ervescents /

High speed press Original Manufacturer by: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate Overhauled - Rebuilt by Silicon plus

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

High Speed Precision Press Maker Obata (Japan) Year of manufacturing - 1981 Capacity 10 t Stroke length 22 mm Speed 100-400 stroke/min price 6000 EUR

Bruderer press. Year of production: 1985 Condition: perfect The press has a soundproofing cabin and a roll feeder.

Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.

Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm

Schaal SEP 40 Automatic Punching Press. Year of manufacture: 1993. Completely revised in 2023 with new Siemens PLC control. Nominal capacity: 400 [kN] (40 [t]). Min./Max. number of strokes: 100 – 500. Ram adjustment: 70 [mm]. Variable stroke: 8 – 70 [mm]. Ram surface area: 340 – 300 [mm]. Stroke range: 8, 10, 15, 20, 25, 31, 36, 41, 46, 50, 54, 58, 61, 64, 66, 68, 69, 70 [mm]. Table dimensions: 550 x 580 [mm]. Fitted with gripper feeding device SZV 2. Width of strip: 8 - 120 [mm]. Feed length: 2 – 80 [mm]. Feeding thickness: 0.1 – 2 [mm]. Feeding: 180 [°]. Feed accuracy: ±0.01 [mm]. Drive power: 7,5 [kW]. Dimensions (H x W x L): 2300 x 1600 x 1400 [mm]. Weight: 3800 [kg]. Including operating instructions in German and English and schematics included. Also on stock high speed presses: Mabu, Schaal, Bihler and other Bruderer models. Also Ideal BAS welders

Mechanical Press Kažinin Gooseneck Worktop 1050x1200 Capacity 630 ton

Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 680 mm Free lateral opening F-B: 250 mm Distance between oil tray: 560 mm Table surface area : 640 x 450 mm Slide area: 560 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 85 - 500 s.p.m. Table height over floor: 875 mm Required power: 7,5 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 5,8 ton

Press capacity: 30 ton Ram stroke adjustable: 16 - 40 mm Slide adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Free lateral opening F-B: 170 mm Table surface area : 480 x 450 mm Slide area: 250 mm Number of strokes: 100 - 600 s.p.m. Required power: 5,5 kW Dimensions L x W x H: 2.150 x 1.200 x 1.160 mm Weight of machine approx.: 2,5 ton

Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton

Press capacity: 250 ton Ram stroke adjustable: 20 - 200 mm Slide adjustment: 140 mm Daylight: 560 mm Table surface area : 1600 x 1000 mm Slide area: 1500 x 900 mm Number of strokes: 20 - 75 s.p.m. Free frontal opening L-R: 1680 mm Distance between the columns F - B: mm Table height over floor: 805 mm Die Weight total: 2700 kg Required power: 41 kW Dimensions L x W x H: 2850 x 2880 x 4395 mm Weight of machine approx.: 25 ton

Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Mbawvyqg Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

45 Number of conrods 2 Table dimensions ( x-y/mm) 700 X 450 Slide Dimensions X-Y (mm) 700 X 360 Stroke (mm) 10 - 50 Light at T.D.C.(mm) 305 Strokes type Adjustable Stroke per minute 80 - 400 Location Germany Machine Conditions Ce Marked

CONTROLS   conventional PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 350 mm   table surface (front-back): 330 mm SLIDE (MECHAN. PRESS)   stroke rate (min.): 250 /min   stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS   total weight approx.: 3800 kg ATTACHMENTS (PRESSES)   decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS   conventional PRESS FORCES   total force (nominal): 30 to SLIDE (MECHAN. PRESS)   stroke rate (min.): 200 /min   stroke rate (max.): 1200 /min DIMENSIONS / WEIGHTS   total weight approx.: 3600 kg ATTACHMENTS (PRESSES)   decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS   conventional PRESS FORCES   total force (nominal): 20 to SLIDE (MECHAN. PRESS)   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 38 mm   variable speed: yes   stroke rate (min.): 100 /min   stroke rate (max.): 1800 /min STRIP-FEEDER   feeder type: roll feeder ELECTRICAL SPECIFICATIONS   total power consumption: 20 kW DIMENSIONS / WEIGHTS   total weight approx.: 3600 kg Coil Reel&Straightener KOHLER (option)

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 480 mm   table surface (front-back): 428 mm SLIDE (MECHAN. PRESS)   slide adjustment: 40 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 40 mm   variable speed: yes   stroke rate (min.): 100 /min   stroke rate (max.): 600 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 220 mm STRIP-FEEDER   feeder type: roll feeder   feeding step min.: 20 mm   feeding step max.: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 4.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/ri ...

Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5

Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton

Press capacity: 32 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 270 mm Free frontal opening L-R: 685 mm Free lateral opening F-B: 250 mm Table surface area : 680 x 530 mm Slide area: 565 x 350 mm Hole in table: 450 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 950 mm Required power: 7,5 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 5,5 ton

Press capacity: 25 ton Ram stroke adjustable: 13 - 38 mm Slide adjustment: 51 mm Shut height (stroke down, adjustment up): 230 - 281 mm Max. die size: 430 x 360 mm Number of strokes: 100 - 1.500 s.p.m. Table surface area : 530 x 530 mm Required power: 18 kW Dimensions L x W x H: 2.075 x 1.355 x 2.620 mm Weight of machine approx.: 4,5 ton feeding speed: sheet width: 200 mm