hard used for sale

OFFFER OF THE FOLGENDEN ARTIKEL Number: SD001 Number: 1 apiece Shoe repair centre (cleaning machine, etc.) Factory: Hardo Type: unknown/no type recognizable Accessories: various accessories (see pictures) Dimensions above all: Width 1540 mm x height: 1790 mm x Tife: 790 mm State Note! See also the Foto/photos about the condition. Note! Only the described item is sold. Nothing else that can be seen in the pictures.

Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 18i-TB Operating hours: 9976 Technical data Number of axis total: 5 Swing over bed: 620 mm Turning diameter: 380 mm Bar passage: 52 mm Turning length: 540 mm Longitudinal travel (Z-axis): 600 mm Longitudinal travel (X-axis): 217 mm Transversal travel (y-axis): 101.6 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 12 Spindle speeds: 4000 rpm Power of driven tools: 5.5 kW Spindle nose: Inner cone diameter: 40 mm Taper in spindle: Camlock: A2-6" Collet bore: 52 mm Spindle speeds: stepless up to: 4500 rpm Back spindle:: A2-5" max. speed: 6000 rpm Spindle diameter: 45 mm Power of back spindle: 11/15 kW Rapid traverse:: 30 m/min Time under power: 13221 Hour Working time: 8781 Hour Voltage 50 Hz 3x: 400 ...

Turning diameter: 340 mm Turning length: 355 mm Turret positions: 0 CNC Brand: Fanuc MACH-id    4091 MAKE        Bridgeport Hardinge TYPE          ELITE II 8/51 YEAR         2006 SPECIFICATIONS Swing over bed Ø   340 mm Control       Fanuc Swing over cross slide    200 mm Distance between centres     355 mm Work piece weight      45 kg Spindle bore        51 mm Spindle speeds / ranges      5000 Rpm Power     11 Kw DIMENSIONS Length     6000 mm Width      2300 mm Height     2100 mm incl. collet device incl. coolant ystem incl. bar feeder

Turning diameter: 340 mm Turning length: 340 mm Turret positions: 10 Positions ATC: 0   Number controlled axis: 5   CNC Brand: Fanuc CNC Model: 18i TB MAKE  Bridgeport Hardinge TYPE   ELITE - II 8/51 YEAR   2006 SPECIFICATIONS Swing over bed Ø    340 mm Control    FANUC 18i TB Swing over cross slide   210 mm Swing in the gap Ø   533 mm Distance between centres   340 mm Work piece weight   45 kg Spindle bore    51 mm Spindle speeds / ranges    5000 Rpm Power    11 Kw DIMENSIONS Length    6000 mm Width      2300 mm Height     2100 mm  

Turret Lathe Fabr. HARDINGE Type HCT 3Machine -No: EC 2270Top height: 170 mmTurning length: 240 mm16 spindle speeds: 125 - 3000 rpm.stepless slide feed: 0 - 100 mm / min.Drive power: 1.5 hpExternal dimensions approx: 1900 x 800 x 1600 mmWith- Collet device- Three-jaw lathe chuck 125 mm- 6-fold revolver slide- 8-fold revolver stop- Abstechschlitten- 48 collets up to max. 28.5 mm- Cooling device- R + L runvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table length: 1120 mm Table width: 540 mm Longitudinal X: 1020 mm Cross Y: 540 mm Vertical Z: 540 mm Positions ATC: 30   CNC Brand: Heidenhain CNC Model: iTNC 530 SPECIFICATIONS X - Travel  1020 mm Y - Travel  540 mm Z - Travel  540 mm bed / plano / portal / moving column  bed milling Controll  iTNC 530 Table Length x Width   1120 x 540 mm Table load in kG  800 Kg Spindle Taper  Bt 40 kW power on spindle  15 kW Spindle speeds / ranges  10000 Rpm ATC tool changer  30 Number off controlled axis 3  

This HARDINGE GS-150 Lathe was manufactured in the year 2008 in Taiwan and has 38272 hours, of which 17669 are cutting hours. It is equipped with a Fanuc Series Oi-TC control unit. The machine has a spindle speed of 6000 rpm.

Key data: 300 mm, 500 mm, 4000 1/min

Machine Details Stock-No. 1105-04001 Type of machine CNC Lathe - Inclined Bed Type Make HARDINGE Type CONQUEST T 51 Year of manufacture 1997 Type of control CNC Storage location HAGUENAU FRANCE Country of origin UK Delivery time Immediatly Freight basis ex warehouse, loaded Technical details turning diameter 300 mm turning length 500 mm control fanuc 18 T max. swing diameter 400 mm spindle head A 2-5 Bar Material Dia. 51 mm turning speed range 4000 rpm spindle drive 11/15 kW Torque 168 Nm Tool Diameter 32 mm Rapid traverse 30 m/min total power requirement 15 kW weight of the machine approx. 3.2 t dimensions of the machine approx. 2.0 x 1.7 x 1.8 m Accessories cooling attachment Additional information FANUC 18T CONTROL 3 JAWE CHUCK + taistock CHIP CONVOYER

This HARDINGE VL-5 lathe, manufactured in 2001, is equipped with a GE Fanuc 21i-T controller. It has a chuck diameter of 260 mm and supports a maximum turning diameter of 220 mm and a workpiece length of 110 mm. The spindle speed reaches up to 4,500 rpm, with rapid feed rates of 60 m/min for the X-axis and 30 m/min for the Z-axis. It also features an automatic tool changer with 12 driven positions. For further details regarding this lathe, contact us.

X-travel: 189,2mm, y-travel: 101mm, z-travel: 638,3mm, max. rotational speed: 5000/min, swing over bed: 519mm, controls: FANUC Series 331i-MODEL A, connected load: 81.5kVA, length: 2991mm, width: 2289mm, height: 2089mm, weight: 6.57t, operational hours counter: 11.873h, including documentation and accessories.

Machine Details Stock number 1105-03796 Machine type CNC lathe Make HARDINGE Type ELITE II 8/51 Year of construction 2006 Control type CNC Control FANUC 21 I TC Storage location FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TC 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

Machine Details Stock number 1105-03800 Machine type machining center - vertical Make HARDINGE-BRIDGEPORT Type vmc 1000 Year of construction 2007 Control type CNC Control FANUC OIMC Storage location FRANCE Country of origin UK Delivery time immediately Freight base from stock HAGUENAU FRANCE Price Technical details x-travel 1000 mm y-travel 510 mm z-travel 510 mm Control FANUC OIMC Table clamping surface 1150 x 490 mm Rapid traverse 30/30/30 m/min Speed range 10000 rpm Drive power - milling spindle 13 kW Number of tools in the magazine 20 BT 40 pieces Information 3-axis CNC machining center Accessories: CNC FANUC OIMC - Synchronized tapping - flat guides in all three Axes RS-232 interface SPAENEFFORDERUNGE

Key data: 1000 , 610 , 610

Machine Details Stock-No. 1105-03805 Type of machine Machining Center - Vertical Make BRIDGEPORT Type HR 1000 Year of manufacture 2011 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details X-Travel 1000 mm Y-Travel 610 mm Z-Travel 610 mm control CNC FANUC OIMC Table surface area 1150 x 540 mm Rapid traverse 30/30/30 m/min turning speed range 12000 rpm power capacity - milling spindle 13 kW No. of tools in the magazine 30 pieces tool taper BT 40 Additional information CNC FANUC OIMC - Synchronised tappin - boxway system 3 axis - RS-232 interface mm)

Machine Details Stock number 1105-03814 Machine type machining center - vertical Make HARDINGE Type VMC 1000 II Year of construction 2001 Control type CNC Control FANUC 18 MB Storage location HAGUEANU FRANCE Country of origin taiwan Delivery time immediately Freight base from stock Price Technical details x-travel 1000 mm y-travel 510 mm z-travel 510 mm Control FANUC 18 MB Clamping surface table 1120 X 510 mm Table load - central/maximum 700 kg Tool holder SK40 Spindle speed: 24...8000 rpm Tool magazine with 20 SLOTS Information Equipment: Machine has CNC FANUC 18 M Machine can be demonstrated!

Very good condition Control type Heidenhain iTNC 530 X Axis Stroke 885 mm Y Axis Stroke 800 mm Z Axis Stroke 500 mm Axis A +30°~-120° Axis C ±360° Spindle table-nose distance 130~630 mm Table dimensions Ø 600 x 450 h mm Permissible weight 300 Kg Spindle speed 12,000 rpm Spindle connection BT40 Tool magazine 60 positions Refrigeration through spindle 20 Bar Chip Evacuator Accessories

CNC VERTICAL MACHINING CENTER Condition Used Very good condition Control type Fanuc 18i MB X axis stroke 1.020 mm Y-axis stroke 540 mm Z axis stroke 510 mm Table dimensions 1.120 x 540 mm Spindle speed 12,000 rpm Spindle power 15 Kw Spindle connection BT40 Tool turret 24 positions Refrigeration through spindle 15 Bar Tool presetting with table-mounted probe Chip Evacuator Accessories

Machine Details Stock number 1105-03825 Machine type CNC lathe Make HARDINGE Model ELITE 8/51 Year of construction 2003 Control type CNC Control FANUC 21 I TC Storage location HAGUENAU FRANCE Country of origin UK Delivery time by arrangement from location Off-site freight base, uninsured Technical details Turning diameter 340 mm Turning length 350 mm Control FANUC 21 I TC Speed 5,000 rpm Drive power 11 kW Number of tools 12 pcs. Number of revolvers 1 Tool holder VDI 30 Information Clamping device main spindle 3 BAKENchuck Tailstock Programming system fanuc 21 I TB 3 AXIS WITH LIVE TOOLS VERY NICE MACHINE CHIP CONVOYER

Machine Details Stock-No. 1105-03826 Type of machine CNC Lathe Make HARDINGE Type CONQUEST 42 Year of manufacture 1992 Type of control CNC Storage location FRANCE Country of origin USA Delivery time by arrangement from location Freight basis from location, uninsured Price Technical details turning diameter 264 turning length 353 mm control FANUC 18 TB turning diameter over slide 284 mm turning speeds 500 rpm Rapid traverse 20 m/min power capacity 15 kW Number of tools 12 pcs. Tail Stock Progr. Barrel Additional information GOOD MACHINE FANUC CONTROL 3 AXIS MMACHINE WITH LIVE TOOLS TAILSTOCK

Axes travel X-1020 Y-610 X-560 SK40 spindle 8000 rpm Magazine for 20 tools Control Siemens Sinumerik 810d Communication with the PC via the RS port, we have a new postprocessor for the machine written by GM System The center is operational and is in constant use

Key data: 284 mm, 406 mm, 6000 1/min

- Turning diameter: 284 mm - Turning length: 406 mm - X: 218 mm - Z: 406 mm - Speed range: 6000 rpm - Spindle clearance: 45 mm - Revolver: 12-speed - Driven tools: yes - Control: Siemens 810 D - electr. Handwheel: yes - Chip conveyor: yes - Total power: 25 kW - Machine weight: 2.694 kg - Space requirement (W x D x H): 3.0 x 1.55 x 1.8 m Details Spindle restocked in 2024, Siemens Options: Shopturn, Pheriperie Switch, ShopTurn Work Step Programming, Transmit & Sheath Surface Transformation Accessories Documentation, no other accessories

Key data: 700 mm, 510 mm, 510 mm

Machine Details Stock number 1105-03983 Machine Type Machining Center - Vertical Make HARDINGE Type VMC 700 Built in 1995 CNC control type Control FANUC 18 MB Storage location HAGUENAU Country of origin: taiwan Delivery time immediately Freight base from stock Price Technical details x-travel 700 mm y-travel 510 mm z-travel 510 mm Control FANUC 18 MB Clamping surface table 850 X 510 mm Table load - central/maximum 7 kg Tool holder SK40 Spindle speed: 24...8000 rpm Tool magazine with 20 PLACES Total power requirement 17 kW Information Equipment: Machine has CNC FANUC 18 MB

Key data: 300 mm, 550 mm

Stock-No. 1105-03990 Type of machine CNC Turning- and Milling Center Make HARDINGE Type QUEST 6/42 Year of manufacture 2001 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details turning diameter 200 mm turning length 555 mm Control Fanuc 16 IT Spindle Bore Diameter 65 / 42 mm number of controlled axis 8 turning speed range 25 - 6000 rpm power requirement 18+18 kW rapid speed 20/30 m/min number of tapers in turret head 10+10 number of driven tools in turret 10+10 Spindle speed of driven tools 40 - 4200 rpm Spindelpower on driven tool 7 kW tail stock sub-spindle Additional information CNC-Lathe with driven tools,c axis , sub-spindle - Chipconveyor - - some toolholders live and fixed vdi 30 - Programmable Partscatcher CNC Fanuc 16 IT

The machine is in good technical condition. X - 1500 mm Y - 700 mm Z - 610 mm Table length 1700 mm Table width 700 mm Dimensions (approximate) Length 3800 mm Width 2635 mm Height 3270 mm Weight 10000 kg By prior arrangement, the possibility of a tour in progress.

This HARDINGE GX 1000 Vertical Machine Center was built in the year 2006 and has 48360 hours, of which 17920 are cutting hours. It is equipped with a Fanuc Series Oi-MC control unit and has 3 axis. The machine has a spindle speed of 10000 rpm.

This HARDINGE XR 600 5AX Vertical Machining center was made in 2011. It is equipped with a HEIDENHAIN iTNC 530 control unit and has 5 axis. The machine has a spindle speed of 12000 rpm, is in very good condition and well maintained.

max. turning diameter:102 mm turning length:450 mm swing dia.:494 mm bar material dia.:65 mm spindle turning speed - stepless:S1 / S2: 4.000 1/min spindle drive:S1 / S2: 18,6 / 11 kW Turret No.1 stations / rotary tools:10/10 VDI 30 Turret No.2 stations / rotary tools:10/10 VDI 30 Driven Tools:8.000 1/min work piece power:3,7 kW total power requirement:90 kVA weight of the machine ca.:10 t dimensions of the machine ca.:6 x 2,5 x 2, m CNC-turning-center with 2 turrets, 8 axis, 2x 10-pockets turrets with live-tools, C-axis on both spindles, Y-axis +-35mm turret 1, 2pcs. collet-chucks, chipconveyor, barfeeder, tooleye, approx. 60.000h "machine on", approx. 17.500h "spindle on"

NEMESIS 9000 are high-quality, modern, by INNOVATEST developed and produced hardness tester. These versatile machines combine groundbreaking technologies and extensive facilities in a machine body with a modern design. The basic function of the hardness concept is based on a settled on the test piece nose cone's mounted a turret with up to 8 positions. The desired hardness test method can be choiceed conveniently on the large touch screen monitor by means of Visual, intuitive user interface (control and evaluation software IMPRESSIONS. Now, the operator presses START and starts the automated testing: -automatically the turret swivels the correct Indentor / lens -using search drive, the specimen surface is contacted and focused (Vickers / Brinell) -now the impression generated power-regulated -then the integrated image analysis software automatically evaluates the impression of h ...

NEMESIS 5100 - Universal hardness tester with turret head (saves changing indenting bodies and lenses) THE ultimate universal hardness testing machine - all-rounder: stand-alone or fully automatic hardness gradients (requires motor XY table) This hardness testing machine sets the reference in the current state of the art. The basic function is based on a test head lowering to the test piece on which a turret head with up to 8 positions is installed. This is particularly advantageous if the test piece is very heavy or if an automatic feeding system is to be used. In addition, the user does not have to worry about focusing: The automatism finds the correct test height / focus distance automatically (detecting search). The desired hardness test method can be conveniently selected on the large touchscreen monitor. Now the operator presses START and the automated test begins: - aut ...

Brinell hardness tester with fully automatic test sequence, automatic Brinell hardness impression measurement The machine is equipped as standard with a motorized 6-fold turret head (3 penetration bodies, laser positioning system and 2 lenses with ring light). The video measuring system with 18-MP video camera delivers excellent images, the automatic evaluation of the Brinell-Calotte impression is extremely fast and very precise. With this fully automatic hardness tester, only START has to be operated after the focus: The impression and the evaluation are fully automatic. At the touch of a button, a test certificate is automatically generated. The IMPRESSION™ hardness test software with digital zoom function, offers numerous functions for converting Brinell hardness results into other hardness scales or tensile strength. Highlights of the machine: - Hardness scales: All Brinell  ...

The NEXUS of 7501 is the cheapest universal hardness testing machine with currently available technology: This hardness testing machine sets the benchmark in quality and price in the device class with proven swivel mechanism (motor switch between Indenter and lens): never get a comparably-equipped machine of this quality at such a fair price. In the standard version are already integrated: USB camera + software for the automatic measurement of impression of hardness -electronically controlled test load application with load cell in closed-loop -integrated boxed PC (WIN 7), LAN connectivity, result export, hardness testing software IMPRESSIONS -integrated touch-screen monitor for a simple, direct touch control -LED lighting, Brinell with ring light The machine is universally suitable for all classic metal hardness testing (test loads 0.5 250 kg). Due to the modern, quality equip ...

Micro hardness tester Vickers HV0,001 to HV 30 (depending on type) from 1 gram - all force levels force-controlled The FALCON 400 series are micro-hardness testers for a test force range of 0.001 to 30 kgf (depending on the type) for the micro Vickers, Knoop and Micro-Brinell hardness testing methods. The unique test force load system includes an electronic control system in the closed control circuit and sensor technology with force feedback. In addition to the electro-mechanical test force load, the FALCON is equipped with first-class mechanical and optical components. The innovative software functions of the I-Touch™ "control" allows the storage of results, creation and storage of test programs, overwashing of results (limit input), conversion to other hardness scales and curvature corrections for measurement on unplanned test surfaces. The digital / optical hardness impressio ...

asdfasdfasdf

Automatic hardness testing device with 4 heads Micro IRHD IRHD Type L IRHD Type N IRHD Type H The device needs gibitre software installed on the computer to work. The device consists of a stand and 4 heads

Automatic hardness testing device with 3 heads Shore 00 Shore A Shore D The device needs gibitre software installed on the computer to work. The device consists of a stand and 3 heads

Qty. 1 Second-hand hardening and tempering tube furnace Type of furnace: Roller Hearth Type Hardening & Tempering Furnace Line Mfc.: HANJUNG FURNACE TECH Built: 2012. Effetive Size: Hardening Furnace: ø2380 mm x 57800 mm Shifting rolls: 34 sets Tempering Furnace: ø2380 mm x 61200 mm Shifting rolls: 28 sets Capacity: Max. 30 Ton/H Normal: 25 Ton/H Pipe Dia. 76 – 305 mm (3" ~ 12") Total power: 700 kW Heat Treatment: Quenching & Tempering Normalizing Scope of supply: Charging Table Hardening Furnace Quenching Transfer Conveyor Tempering Furnace Entry Conveyor Stock Conveyor Water Cooling System Control System Exit Conveyor Quenching Tank Discharging Conveyor

Hard cheese cutter, hard cheese cutting machine, parmesan cutter, parmesan cutter -Hard cheese cut over a wire -for whole loaves and for further sharing -Body: made of stainless steel -Operating voltage: 380 V -Dimensions: 1010/880/H1600 mm -Weight: 162 kg

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Drop Roller for Hard Candy with electr. Engine roller size. : approx 58mm x 177 mm table size : approx. 750mm x 620mm x 750mm (lxwxh) Packing dimensions : approx. 30” x 30” x 25” (wooden box suitable for export) Net Weight : approx. 200 kg. Gross weight : approx. 250 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Machine with working table, electrical engine and gear box. Also available, machine hand driven, without electrical engine We offer this machine in as-is where it is condition delivery time: appr. 8-12 Weeks after payment in our warehouse

Hard rock slab, granite slab, granite block Hard rock block, angle block precisely machined on all sides Measuring cube length: 1590 mm width: 300 mm Height: 470 mm- 2 holes 80 mm- 2 holes 120 mm - threaded bushes mainly M16, some with M12 and M18 Net weight: 570 kg good condition; used

Hard rock slab, granite slab, granite block, measuring cube Hard rock block, angle block precisely machined on all sides The granite top comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm- 5 pieces of shelter blocks with levelling screws approx. 400 mm- 8 pieces of threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 pieces of threaded bushings M16 - small chipping on the edge of the plate Overall dimensions L x W x H: 1350 x 1350 x 300 mm Dead weight measuring plate: 1500 kg Dead weight granite feet: 100 kg very good condition; used

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Nuova Euromec, Italien Type: 2 PL S 66PRD Filling Pump for hard boiled candy YOM: 1994 output: up to 400 Lt./h Funnel Volume ca. 80ltr electrical: 400V 3 PH dimensions: 1200x1400x1500mm Wight: 135kg different: incl. 4x filling pipes for Liquid filling We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked

REF-2102 DOUBLE TWIST HARD CANDY WRAPPER GD BOLOGNA Machine number 1. Format: 1.2. Dimensions: 1.300mm width, 2.200mm length, 1.700mm height.

PRECISION HARD TURNING : AN ECONOMICAL ALTERNATIVE TO GRINDING

REF-2085 HARD CANDY COOKER WITH VACUUM SYSTEM Manufacturer: Otto Haensel Hannover Model: Sucromat 4T. Serial no.: 17040057. Date of manufacture: 09/1977. 380V, 50Hz, three-phase, 7.0kVA, 24VAC. Dimensions: 1,400mm width, 1,850mm length, 2,200mm height.

Hard rock - test plate, stone measuring plate, granite measuring plate, measuring table PAGUS DIN 876 Working surface: 630 x 400 mm Working height: 920 mm Material: IMP with base cabinet: 510 x 360 x 700 mm with key used, tested ! Dimensions: 630 x 400 x 920 mm

Description: 1x desk 1x desk chair 1x filing cabinet 2x monitor 3x personal computer (without hard drive) Approx. Onsite Dimension. (l x w x h): 2,000 x 1,000 x 2,000 mm, weight approx.: 75 kg

Fully automatic capsule sealing machine. Incl. PLC: Siemens-S5, type: 954, Operating controll: Lauer PCS 095. Format part for capsule size. 3. Output: up to 100'000 capsules/h. Furthermore incl. Visco system TRAWID VM, Sensor O.B.D, Control H, No. 04712479. The controll device is self made (Comp. Wetzel). Gelatin-vessel is A2/ double jacket, heatable with IKA stirrer RW 16- basic incl. agitator OPTI- Color, pump Watson - Marlow 505 S, two forward- and two backward pipe.

Gas-fired continuous furnace, make VEI type: DLO_GB heated length: 4000 mm conveyor belt width: 900 mm emperature: max. 950 ° C

Shaft furnace,make VEI type: SCO_EB height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

The FALCON 500 series is a new generation of micro Vickers / macro Vickers / micro Brinell hardness testing machines with integrated load cell and test loads of Vickers / Knoop (depending on type): 1 g 62.5 kg (also in one device) The device improves the conventional hardness testing and is aimed at the reduction of operator influence on the test results. The unique system to the test load application includes an electronically controlled application of force and excellent force sensor technology for absolute accuracy. Continue to the FALCON hardness testing machine offers a superior quality of mechanical and optical components and makes it to the reference instrument of this class. The innovative hardness testing software IMPRESSIONS with "Workflow control" allows the storing of results, creation, storing programs Quality at a fair price - approximately 30% cheaper compared to  ...