british flag
Resale Logo

haas used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used rubber machines  SGT SERVIS,spol.s r.o.  http://www.sgt.cz 
banner logo
start page > keywords haas > results
110 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6
121121212 106

BRUDERER - LEINHAAS DDP 2 / R 09 / 80 H for sale
Differential Length Presses


Differential pressure press Force of pressure: 80 to. Number of strokes: Max 95 stroke / min - infinitely variable Stroke adjustment: 3-100 mm Tappet adjustment: 100 mm Table size: 900 x 600 mm Tappet surface: 70 ...
used machine
 
Differential pressure press

Force of pressure: 80 to.
Number of strokes: Max 95 stroke / min - infinitely variable
Stroke adjustment: 3-100 mm
Tappet adjustment: 100 mm
Table size: 900 x 600 mm
Tappet surface: 700 x 250 mm
maximum height: 350 mm
Total power consumption: approx. 22 KW / 400 V
Machine weight: 7000 kg

Equipment / Accessories:
SICK photoelectric
Two-hand - and foot operation
Stanztronic presses control
stepless stroke number adjustment
Documentation

All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake.
Each party has the opportunity to visit the machine before purchasing power.
One ord. Rchng. plus ges. VAT will be issued.
1991
Price  
    request
121080592 106

BRUDERER - LEINHAAS DDP 2/R09/80 H for sale
Differential Length Presses


Force of pressure: Max 80 to. Stroke rate: Max 95 H/min (stepless) Stroke adjustment: 3-100 mm. Tappet adjustment: 100 mm. Table area: 900 x 600 mm. Tappet surface: 700 x 250 mm. Height: 350 mm. STANZTRONIC presse ...
used machine
 
Force of pressure: Max 80 to.
Stroke rate: Max 95 H/min (stepless)
Stroke adjustment: 3-100 mm.
Tappet adjustment: 100 mm.
Table area: 900 x 600 mm.
Tappet surface: 700 x 250 mm.
Height: 350 mm.
STANZTRONIC presses control
and complete documentation.
Power: 22 kW.
Weight: 7000 kg.
Good ready condition.
The machine can be seen in consultation under power and is immediately available.
1991
Price  
    request
120999979 702

HAAS 48 for sale
Waffle systems


Condition: used Cup size: - top part: 75 mm - bottom part: 46 mm - height: 78 mm -2 x 24 baking forms
used machine
 
Condition: used

Cup size:
- top part: 75 mm
- bottom part: 46 mm
- height: 78 mm

-2 x 24 baking forms
 
Price  
    request
120975456 101

HAAS VF 1 for sale
Vertical Machining Centre


X-travel: 508mm, y-travel: 406mm, z-travel: 508mm, spindle tabel distance: 102-610mm, table size: 660x356mm, T-bolt width: 16mm, T-bolt distance: 125mm, number of T-bolts: 3, tabel load: 1.36t, nominal power: 22.4kW max. ...
used machine
 
X-travel: 508mm, y-travel: 406mm, z-travel: 508mm, spindle tabel distance: 102-610mm, table size: 660x356mm, T-bolt width: 16mm, T-bolt distance: 125mm, number of T-bolts: 3, tabel load: 1.36t, nominal power: 22.4kW max., rotational speed: 8100/min max., torque at 2000/min: 122Nm, rapid traverse x-, y- and z-travel: 25,4m/min, feed rate: 16.5m/min, thrust power x- and y-travel: 11343N max., thrust power z-travel: 18683N, number of tools: 20, tool diameter: 89mm max., tool weight: 5.4kg max.
1998
Price  
  DE   request
120960045 101

HAAS MDC 500 HE for sale
CNC machining center


CNC machining center HAAS MDC 500 Hey, vertical, 2 pallets, indexer Year of construction: 2005 Country of origin: USA Working area: X 508 mm Y: 355 mm Z: 508 mm Range: 500 x 400 mm Spindle speed: 15 000 rpm Tool  ...
used machine
 
CNC machining center HAAS MDC 500 Hey, vertical, 2 pallets, indexer
Year of construction: 2005
Country of origin: USA
Working area: X 508 mm
Y: 355 mm
Z: 508 mm
Range: 500 x 400 mm
Spindle speed: 15 000 rpm
Tool Magazine: 24 PCs
Spindle taper: ISO 40
Control: CNC HAAS
2005
Price  
    request
120960034 101

HAAS MDC 500 HE for sale
CNC machining center


CNC machining center HAAS MDC 500 Hey, vertical, 2 pallets, indexer Year of construction: 2005 Country of origin: USA Working area: X 508 mm Y: 355 mm Z: 508 mm Range: 500 x 400 mm Spindle speed: 15 000 rpm Tool  ...
used machine
 
CNC machining center HAAS MDC 500 Hey, vertical, 2 pallets, indexer
Year of construction: 2005
Country of origin: USA
Working area: X 508 mm
Y: 355 mm
Z: 508 mm
Range: 500 x 400 mm
Spindle speed: 15 000 rpm
Tool Magazine: 24 PCs
Spindle taper: ISO 40
Control: CNC HAAS
2005
Price  
    request
120917322 702

HAAS, MEINCKE, POLIN Triomat 1000 for sale
Hart Dough Biscuit Line


Hard Dough Biscuit line consisting of: 1.) 3-Roller Extruder, Haas / Meincke Triomat from 2011 with OUTPUT CONVEYOR with digital roller-gap indication and motorized gap adjustment, thickness of outgoing dough sheet f ...
used machine
 
Hard Dough Biscuit line
consisting of:
1.) 3-Roller Extruder, Haas / Meincke Triomat from 2011 with OUTPUT CONVEYOR
with digital roller-gap indication and motorized gap adjustment, thickness of outgoing dough sheet
from 15 to 35mm stepless adjustable, working width 800mm, equipped with input hopper with partition
wall separating the return scrap dough, level control, outlet conveyor length 1.9m and control
cubicle for stand alone machine
2.) I GAUGE ROLLER PAIR - Duomat
II GAUGE ROLLER PAIR - Duomat
III GAUGE ROLLER PAIR - Duomat
working width 800mm, total length with outlet conveyor 3 x 1270mm, to decrease thickness of dough
sheet, manual adjustment of roller-gap, independent drive of belts and rollers with invertors
3.) DOUGH CUTTING UNIT:
working width 800mm, the rollers, one for printing, second fro cutting, total length 2650mm, manual
adjustment of roller-gap, independent drive of belts and rollers with invertors.
4.) CONVEYOR FOR SCRAP RETURN DOUGH
above gauge roller pair duomats, working width 800mm, length 10m, drive with invertor.
5.) CONVEYOR :
working width 800mm, length 2600mm , belt conveyor for transfer of dough pieces to wire mesh belt of
the oven, drive with invertor
6.) Polin Steel belt oven:
indirect heating, 4 zones, installed heating power 4 x 230 KW, fuel CNG, working width 800mm, total
baking chambers length 50m.
7.) STACKING UNIT:
working width 800mm, stacking with stars wheel, independent drive of belts and stars with invertors.
2011
Price  
    request
120630326 101

HAAS VM-3 for sale
Machining centers (vertical)


The machine is in good technical condition, according to a previous agreement, the possibility of testing. XYZ: 1016 x 660 x 635 mm, table spindles: 102-737, 1372 x 635 mm table, spindle speed 1200 U / min, cone DIN40, s ...
used machine
 
The machine is in good technical condition, according to a previous agreement, the possibility of testing. XYZ: 1016 x 660 x 635 mm, table spindles: 102-737, 1372 x 635 mm table, spindle speed 1200 U / min, cone DIN40, spindle motor 22.4kW, HAAS high-speed machining, MPG port USB, 1 ATC station, programmable coolant nozzle, low pressure light,. Belt conveyor with turning device.
2010
Price  
  CZ   request
120191226 101

HAAS VF-2 for sale
Numerically Controlled Machining Centres


Technical data: On-time: 13.875 hours Cycle start time: 5,392 hours Feed cutting time: 4.990 hours Travel: "X-axis: 30" "Y axis: 16" "Z-axis: 20" Spindle nose to tabl ...
used machine
 
Technical data:

On-time: 13.875 hours

Cycle start time: 5,392 hours

Feed cutting time: 4.990 hours

Travel:

"X-axis: 30"

"Y axis: 16"

"Z-axis: 20"

Spindle nose to table: 4 "-24"

Table:

Size: 36 "L x 14" W

"T-slot distance: 4.92"

Standard T-slots (3): 5/8 "W

Table load: 3,500 lbs (maximum)

Spindle:

Rating: 20 HP (max)

Speed: 7500 RPM (max)

Torque: 75 foot-pounds at 1400 RPM (max)

Drive system: Inline direct drive

Taper: BT-40

Bearing lubrication: Air / oil injected

Cooling: liquid-cooled

Feed prices:

Rapids on X / Y / Z: 1000 / min

Maximum cut: 650 in / min

Axis motors:

Maximum thrust X & y: 2,550 pounds

Maximum thrust Z: 4,200 lb

Tool changer:

Capacity: (20)

Tool diameter (full): 3.5 (maximum)

Tool weight: 12 lb (maximum)

Tool-to tool: 4.2 sec (average)

Chip-to-chip: 4.5 sec (average)

Accuracy (1 axis):

Positioning (±: 0,0002"

"Repeatability (±): 0.0001"

Engine: 20 HP / 208/230 v / 3 ph

Air required: 4 scfm, 100 psi

Coolant capacity: 55 gallons

Facilities:

20 tool changer

Spindle coolant

Brushless servos

2 speed gear head

Rigid tapping

Chip conveyor

3.5 "floppy disk drive

1 MB memory

4-axes ready
1999
5,100 €  
  DE   request
120191220 101

HAAS TM 1 for sale
Numerically Controlled Machining Centres


2001 TRM 1 1 owner in good condition.
used machine
 
2001 TRM 1 1 owner in good condition.
2001
4,100 €  
  DE   request
120191218 101

HAAS VF-3 for sale
CNC Boring Mills


SPECIFICATIONS: TABLE DIMENSIONS... 48 "X 18" X AXIS TRAVEL. 40" Y AXIS TRAVEL... 20" Z AXIS TRAVEL... 25" SPINDLE TAPER... CT 40 SPINDLE MOTOR... 15 HP SPINDLE SPEEDS... 10,000 rpm NO. ...
used machine
 
SPECIFICATIONS:

TABLE DIMENSIONS... 48 "X 18"
X AXIS TRAVEL. 40"
Y AXIS TRAVEL... 20"
Z AXIS TRAVEL... 25"
SPINDLE TAPER... CT 40
SPINDLE MOTOR... 15 HP
SPINDLE SPEEDS... 10,000 rpm
NO. THE TOOL POSITIONS... 20 ATC
RAPID TRAVERSE... 710 IPM

EQUIPPED WITH:

PROGRAMMABLE COOLANT NOZZLE
2 SPEED BOX
BRUSHLESS SERVOS
RIGID TAPPING
FLOPPY DISK DRIVE
ENABLE DNC
CHIP AUGER
1996
4,500 €  
  DE   request
120191216 101

HAAS Mini-Mill-CNC-17-500  HA for sale
CNC Boring Mills


Technical data: "Travel, 16" x 12 "x 10" Table size, 36 "x 12" Spindle taper, CT 40 Spindle speed 6000 RPM Spindle motor, 7.5HP Tool changer, 10 station carousel Machi ...
used machine
 

Technical data:

"Travel, 16" x 12 "x 10"

Table size, 36 "x 12"

Spindle taper, CT 40

Spindle speed 6000 RPM

Spindle motor, 7.5HP

Tool changer, 10 station carousel

Machine weight, 3 500 kg.

Machine print, 80 "x 80"

Performance, 208V-3P, or 240V-1P

Coolant tank / pump
2001
5,000 €  
  DE   request
119949657 101

HAAS TM-1 for sale
CNC Boring Mills


Haas TM-1 CNC tool room mill Manufacturer: Haas Model #: TM-1 tool room mill Age: 2001 Specification: Haas control 32 bit CNC control Table size 10.5 "x 47,75 ' X-axis travel 30" Y-axis  ...

 
Haas TM-1 CNC tool room mill

Manufacturer: Haas

Model #: TM-1 tool room mill

Age: 2001

Specification:

Haas control 32 bit CNC control

Table size 10.5 "x 47,75 '

X-axis travel 30"

Y-axis travel 12"

"Z axis travel 16"

Spindle taper cat 40

Spindle speeds 0-4,000 rpm

Rapid traverse (X / Y / Z) 200 IPM

Table load 1,000 lbs.

Spindle drive 7.5 HP

Equipped with:

Haas 32 bit CNC control, rigid tapping, coolant tank & pump, 10 station automatic tool

Changer, coolant / chip guard.

Electrics:

208 Volt, 3 phase 240 volt, single phase

Approximate engine dimensions: 87 "L x 62" B x 109 "H

Approximate weight: 3300 lbs.
 
7,400 €  
  DE   request
119949641 101

HAAS VF3 for sale
Vertical Numerically Controlled Machining Centres


Table editing: 48 "x 18" Table load: 3500 pounds X axis travel: 40" Y axis travel: 20" Z axis travel: 25" Winding speed: 7500 RPM Cone spindle: 40 Tool ...
used machine
 

Table editing:

48 "x 18"

Table load:

3500 pounds

X axis travel:

40"

Y axis travel:

20"

Z axis travel:

25"

Winding speed:

7500 RPM

Cone spindle:

40

Tool changer positions:

20

Main operator:

15 HP

Equipped with:

Chip conveyor
1997
2,300 €  
  DE   request
119949634 101

FANUC 200iC/5L for sale


Make: Fanuc Robot Model: LR mate 200iC / 5L Mfg date: 04/2012 Serial: Available only for serious inquiries Controls: Fanuc system R-30iA mate FANUC i trailer Robot pedestal Dual drawer tray system Dual fixture pl ...

 
Make: Fanuc Robot
Model: LR mate 200iC / 5L
Mfg date: 04/2012
Serial: Available only for serious inquiries
Controls: Fanuc system R-30iA mate
FANUC i trailer
Robot pedestal
Dual drawer tray system
Dual fixture plates, to keep at least 100 stacked parts
Exit slide for robots to fall / slide finished parts
Individual PZN 50 gripper
Side shutter door for Haas
Single locking entry gate
Steel BaseThat robot base, dual drawer system and guard mount on electrical
Control valve for existing SCHUNK KSP vise
Design, construction and integration work
(Installed in Eagan on your existing Haas VF-2SS)
Not included: vision system, quick change hook mount, 2. PZN gripper
The machine has less than 500 hours
Asset in excellent condition
 
13,000 €  
  DE   request
119949614 101

HAAS VF-2SSHE for sale
Machining Centre(vertical)


Travel distances: X: 750 mm Y: 400 mm Z: 500 mm Spindle: Spindle power: 22.4 kW Spindle speed: 12000 rpm Rapid traverse: X-axis 35.6 m/min Rapid traverse: Y axis 35.6 m/min Rapid traverse: Z axis 35.6 m ...
used machine
 
Travel distances:
X: 750 mm
Y: 400 mm
Z: 500 mm
Spindle:
Spindle power: 22.4 kW
Spindle speed: 12000 rpm
Rapid traverse: X-axis 35.6 m/min
Rapid traverse: Y axis 35.6 m/min
Rapid traverse: Z axis 35.6 m/min
2005
Price  
  CZ   request
119938632 101

HAAS VF6 for sale
CNC Machining Centre(vertical)


Travel distances: X: 1626 mm Z: 762 mm Y: 813 mm Spindle taper: ISO 40 Spindle speed: 10000 rpm Table area: 1626 x 711 mm Number of tools: 24 Distance from the spindle head to the table (maximum): 864 mm  ...
used machine
 
Travel distances:
X: 1626 mm
Z: 762 mm
Y: 813 mm
Spindle taper: ISO 40
Spindle speed: 10000 rpm
Table area: 1626 x 711 mm
Number of tools: 24
Distance from the spindle head to the table (maximum): 864 mm
Distance from spindle to table (minimum): 102 mm
T-slot width: 14 mm
Number of standard T-slots: 5
Machine dimensions:
4039 x 3378 x 2718 mm
Equipment:
internal cooling
Automatic feeding auger
Programmable cooling nozzle
Color LCD Monitor
(2016) Exchange:
Ruler guide (axis x.y.z)
2005
Price  
  CZ   request
119621000 101

HAAS TM-1 for sale


Spindle time: Only 239 hours! Technical data: "Travel, 30" x 12 "x 16" Table size, 47,75 ' x 10.5 ' Table weight capacity, 1. 000lbs. Cone size, 40 taper Spindle speed, 4000 RPM Transmission, ...
used machine
 
Spindle time: Only 239 hours!

Technical data:
"Travel, 30" x 12 "x 16"
Table size, 47,75 ' x 10.5 '
Table weight capacity, 1. 000lbs.
Cone size, 40 taper
Spindle speed, 4000 RPM
Transmission, direct speed belt drive
Machine dimensions, 65 "x 75" x 100 (Lxwxh)
Machine weight, kg 3,500
Footprint, 90 "x 65"

Properties:
Coolant / pump
H Manual
2006
5,000 €  
  DE   request
119620983 101

HAAS TM-1 for sale
CNC Boring Mills


Age: 2001 Specification: Haas control 32 bit CNC control Table size 10.5 "x 47,75 ' X-axis travel 30" Y-axis travel 12" "Z axis travel 16" Spindle taper cat 40 Spindle spe ...
used machine
 
Age: 2001

Specification:

Haas control 32 bit CNC control

Table size 10.5 "x 47,75 '

X-axis travel 30"

Y-axis travel 12"

"Z axis travel 16"

Spindle taper cat 40

Spindle speeds 0-4,000 rpm

Rapid traverse (X / Y / Z) 200 IPM

Table load 1,000 lbs.

Spindle drive 7.5 HP

Equipped with:

Haas 32 bit CNC control, rigid tapping, coolant tank & pump, 10 station automatic tool

Changer, coolant / chip guard.

Electrics:

208 Volt, 3 phase 240 volt, single phase

Approximate engine dimensions: 87 "L x 62" B x 109 "H

Approximate weight: 3300 lbs.
2001
5,200 €  
  DE   request
119390201 101

HAAS TM-2 for sale
CNC Boring Mills


Spindle time: 5,117 STD Technical data: "Travel, 40" x 16 "x 16" Spindle nose to table, 4 "-20" Table size, 57.75 "x 10.5" Spindle taper, CT 40 Spindle speed, 4000 RPM Spi ...
used machine
 
Spindle time: 5,117 STD

Technical data:
"Travel, 40" x 16 "x 16"
Spindle nose to table, 4 "-20"
Table size, 57.75 "x 10.5"
Spindle taper, CT 40
Spindle speed, 4000 RPM
Spindle motor, 7.5HP
Machine weight, 4, 000lbs.
Machine dimensions, 85 "x 75" x 100 (Lxwxh)
Performance, 208V-3P, or 240V-1P

Properties:
Coolant / pump
H Manual
2004
6,500 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country