gantry milling used for sale

Description: Traverse length 4600 mm maximum capacity: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,200 x 800 mm, weight approx.: 200 kg

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

WALDRICH COBURG 17S-10 FP 300 NC gantry milling machine built in 1989 in Germany is used for machining oversized workpieces, as well as many smaller workpieces at the same time. The machine equipped with a stable work table and indestructible components, allows for performing tasks such as milling, drilling and threading with the utmost precision, guaranteeing maximum process optimisation in a wide range of industries. Workpieces with a maximum weight of 60 tonnes are machined in five axes (X,Y,Z,W,C) using tools taken from a chain magazine located on the left side of the machine. This process is fully automated thanks to the special systems in the magazine responsible for automatic tool change and clamping. The WALDRICH COBURG CNC gantry milling machine is also equipped with a reliable spindle, additional angle milling heads (2 rotary heads, 1 Fork type head) and an intuitive SIEMENS ...

CNC Gantry Type Milling Machine for extra large workpieces. Manufacturer Waldrich Coburg. Model S 22-10 GM 500 NC/16 m. Year 1989. Overhauled/Modernised/Retrofitted 2008. Control Siemens 840D control retrofitted. Table size 15000 x 5000 mm. Table load max. 15000 kg/m². Distance between the columns: With column covers 5800 mm. Without column covers 6000 mm. Distance spindle to table max. 5000 mm. Travels: Gantry longitudinal travel X 16000 mm. Saddle cross travel Y 6800 mm. Milling ram vertical travel Z 2000 mm. Crossrail vertical travel W 3400 mm. Milling spindle Ø front 200 mm. Spindle motor rating 150 KW. Spindle speed range 6 - 750 rpm. Gear steps 2. Torque max. 12900 Nm. Spindle taper ISO 60. Ram section 630 x 680 mm. Proposal Number V(F)-6720

CNC 5-axis gantry milling machine Jobs JomaX 265 W Year of construction 2016 Siemens 840D SL CNC controller Panel size 25,000 x 5,000 mm (10 panel panels) Plate field load per panel field max. 10,000 kg Rapid traverses X,Y,Z/W 28,000/8,000 mm/min. C/A axis 30°/s Distance spindle nose ~ table max. 3,900 mm Distance between uprights 6,000 mm Travel X 28,000 mm Y 6,500 mm Z 1,500 mm 2-axis NC swivel milling head. C 400 (+/- 200°). A 220° +/- 110° Spindle holder HSK-A100 Spindle drive power 42/53 kW Spindle torque max. 1,337/1,687 Nm Spindle speeds up to 3,000 rpm. 1-axis angle milling head 90° BUSS With C-axis +/-200° Spindle holder HSK-A100 Spindle drive power 30/37 kW Spindle torque max. 955/1,178 Nm Spindle speeds up to 2,800 rpm. Vertical milling head BUSS Spindle holder HSK-A100 Spindle drive power 45/56 kW Spindle torque max.1,433/ ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Distance between uprights: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 8000 mm Table width: 2800 mm Travels: Y axis: 9000 mm Z axis: 1250 mm W axis: 2200 mm Distance table to spindle max.: 2806 mm Distance between columns: 3200 mm Table load max.: 64000 kg Taper in spindle: 60 ISO Spindle speeds: number (steps): 16 from: 20 rpm up to: 600 rpm Feeds: X axis from: 5 mm/min up to: 3000 mm/min Y axis from: 5 mm/min up to: 3000 mm/min Z axis from: 5 mm/min up to: 2000 mm/min W axis from: 5 mm/min up to: 750 mm/min Creep speeds: X axis: 5 - 3000 mm/min Y axis: 5 - 3000 mm/min Z axis: 5 - 2000 mm/min W axis: 5 - 50 mm/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 100 kW Overall dimensions about: Length: 21000 mm Width: 7800 mm Height: 6622 mm

Table length: 1250 mm Table width: 600 mm Longitudinal X: 1040 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 30   Distance between uprights: 0 mm CNC Brand: Heidenhain CNC Model: iTnc 530 MACH-id   3989 MAKE       Deckel Maho TYPE         DMC 104 V Linear YEAR        2007 SPECIFICATIONS X - Travel    1040 mm Y - Travel      600 mm Z - Travel      500 mm bed / plano / portal / moving column    Portal Controll     iTNC 530 Table Length x Width   1250 x 600 mm Table load in kG   800 Kg Spindle Taper    Sk 40 kW power on spindle   30 kW Spindle speeds / ranges    12000 Rpm ATC tool changer   30 Coolant true spindle / Bar    10 Bar Number off  ...

Table length: 1250 mm Table width: 800 mm Longitudinal X: 1000 mm Cross Y: 800 mm Vertical Z: 700 mm Positions ATC: 30   Distance between uprights: 1300 mm CNC Brand: _Unknown / Other CNC Model: Dialog 112 MAKE  Deckel Maho TYPE   DMC 100 V YEAR   1998 SPECIFICATIONS X - Travel  1000 mm Y - Travel   800 mm Z - Travel   700 mm bed / plano / portal / moving column   Portal milling Controll    Dialog 112 Table Length x Width   1250 x 800 mm Table load in kG   1250 Kg Spindle Taper    Sk 40 kW power on spindle   10 kW Spindle speeds / ranges   8000 Rpm ATC tool changer   30 Number off controlled axis   3 Distance between columns    1300 mm DIMENSIONS Length   4500 mm Width    3200 mm  ...

Table length: 3900 mm Table width: 1500 mm Longitudinal X: 3800 mm Cross Y: 1500 mm Vertical Z: 650 mm Positions ATC: 52   Distance between uprights: 2210 mm CNC Brand: Heidenhain CNC Model: TNC 426 MAKE   AXA Germany TYPE    UPFZ 40 YEAR   2001 SPECIFICATIONS X - Travel    3800 mm Y- Travel     1500 mm Z - Travel     650 mm bed / plano / portal / moving column   Portal milling Controll    HeidenHain TNC 426 Table Length x Width    3900 x 1500 mm Spindle Taper    Sk 40 kW power on spindle  20 / 100 % or 30 / 40 % kW Spindle speeds / ranges  100 - 15000 Rpm ATC tool changer   52 Number off controlled axis   5 Axis CNC Automatic milling head / Gr.    2.5 Gr .Distance between columns    2210 mm DI ...

Table length: 2500 mm Table width: 1350 mm Longitudinal X: 2200 mm Cross Y: 1300 mm Vertical Z: 760 mm Positions ATC: 32   Distance between uprights: 0 mm CNC Brand: Fanuc CNC Model: Oi MD Make Dahlih Portal Type DCM 2213 Year 2012 Fanuc 0iMD Table length (mm) L = 2.500 Table width (mm)W = 1.350 Longitudinal X (mm)X = 2.200 Cross Y (mm)Y = 1.300 Vertical Z (mm) Z = 760 Iso50/6000/18.5 kW Chip conveyor ATC Chain 32 positions

Table length: 12000 mm Table width: 4770 mm Longitudinal X: 12000 mm Cross Y: 5300 mm Vertical Z: 4000 mm Positions ATC: 0   Distance between uprights: 5000 mm CNC Brand: Siemens CNC Model: 840 D

- Distance between columns: 2800 mm - Longitudinal travel – X axis: 6000 mm - Cross travel – Y axis: 3000 mm - Vertical travel – Z axis: 1500 mm - Spindle taper: ISO-50 (DIN69871) - Power of main motor: 37 / 45 kW - Spindle speed: 3000 rpm - Working feed: 0-10000 mm/min - Rapid feed X/Y/Z: 15000 mm/min - Centralized hydraulic and lubrication unit - Electrical devices: 380V, 3 phases, 50 Hz - AC servomotors (brushless) - Control of the machine Fanuc CNC - External/Internal tool cooling unit - Heidenhain linear scales for axes - Chain type chip conveyor - Levelling devices for foundation, 1 set. OPTION (not included in the price of standard machine) - TU-37 universal automatic milling head (37 kW, 3000 rpm, 1500 Nm, ISO-50, internal-external tool cooling, 2.5° indexing in 2 planes). - Automatic Tool Changer with 40 posts for milling tools. - Floor p ...

X - axis 5000 mm Y - axis 3100 mm Z - axis 1500 mm B - axis + / - 105 ° C - axis +/- 190 ° spindle taper 63 HSK speed range 18.000 U/min spindle drive 30 KW torque 240 Nm rapid travel X-Y-Z 20 m/min B - axis rapid 30 rpm c-axis rapid travel 30 rpm table surface 5200 x 2000 mm max. table load 20.000 KG no.of toolstations in magazin 60 tool diameter 100 / 190 mm tool length 300 mm tool weight 8 Kg machine dim. 8,9 x 15,0 x 6,4 m weight ca. 95.000 kg CNC HEIDENHAIN iTNC 530 Software: KinematicsOpt 2-axis simultaneous milling head 60 - ATC HEIDENHAIN TS 400 probe BLUM laser Torque monitoring Airblow via jets Air blow system through spindle Paper band filter Cooling through spindle 50 bar Chip conveyor

x-travel:14000 mm y-travel:3100 mm z-travel:1.200 mm (220 - 1.420) mm distance between columns:4.417 mm table-size:14.000 x 2.500 mm workpiece weight:15.000 kg/m drive capacity - spindle motor:25 kW spindle cone:63 HSK spindle turning speed range:18000 rpm milling feeds:30000 mm/min dimensions of the machine ca.:15.000 x 8.418 x 6.033 mm weight of the machine ca.:135 t CNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach

:SD(W)-24 | SD(W)-28 | SD(W)-32 x-travel:6000/8000/10000/12000/14000/16000/18000/20000/22000/24000/360 00 mm y-travel:2400|2800|3200 mm z-travel:1100/1400 mm distance between columns:2450|2850|3250 mm w-axis:1500/2000 mm für SD(W) table width:1600|2000|2400 mm table length:= X-Weg distance spindle nose and table:SD: 1080mm ~2180mm (1020mm-2420mm); SD(W): 800mm~800mm+Z+W spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:22/26 kW (mehr auf Anfrage) feed speeds:X/Y/Z/W: 12/12/10/1 m/min machine length:13,5m~43,5 m machine width:6,5|6,9|7,3 m Weight approx.:50t+2t/m|53t+2,3t/m|56t+2,6t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain different kind of milling heads:90°/5-A ...

:SD(W)-36|SD(W)-42|SD(W)-48|SD(W)-54 x-travel:6000/8000/10000/12000/14000/16000/18000/20000/22000/24000/360 00 mm y-travel:3600|4200|4800|5400 mm z-travel:SD: 1100 mm (1400/1500) SD(W):1100 mm (1400/1500) mm distance between columns:3650I4250|4850|5450 mm w-axis:1500/2000 mm für SD(W) table width:2800|3400|4000|4600 mm table length:= X-Weg distance spindle nose and table:SD: 1080mm ~2180mm (1020mm-2420mm); SD(W): 800mm~800mm+Z+W spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:22/26 kW (mehr auf Anfrage) feed speeds:X/Y/Z/W: 10/10/10/1 m/min machine length:13,5m~43,5 m machine width:7,7|8,1|8,5|8,9 m Weight approx.:60t+3t/m|65t+3,3t/m|70t+3,5t/m|75t+3,8t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC cont ...

:HDT-18|HDT-21|HDT-24 x-travel:2000/4000/6000/8000/10000/12000/14000/16000/18000/20000 mm y-travel:1800|2100|2400 mm z-travel:800/1000 mm distance between columns:1850|2150|2450 mm w-axis:N/A table width:1200|1500|1800 mm table length:= X-Weg distance spindle nose and table:555~1355 mm spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:18,5/22 kW (mehr auf Anfrage) feed speeds:X/Y/Z: 15/15/12 m/min machine length:6,5~23,5 m machine width:5,9|6,2|6,5 m Weight approx.:20t+2t/m|22t+2t/m|24t+2,5t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain different kind of milling heads:90°/5-Achs simultan/5-Seiten/Universal etc. CTS:40-70 bar heavy duty ram:550x550mm/650x650mm ATC:60/ ...

x-travel:2000/4000/6000/8000/10000/12000/14000/16000/18000/20000 mm y-travel:1300 mm z-travel:800 mm distance between columns:1350 mm table width:1000 mm table length:= X-Weg distance spindle nose and table:220~1020 mm spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:18,5/22 kW (mehr auf Anfrage) feed speeds:X/Y/Z: 15/15/12 m/min machine length:6,5~23,5 m machine width:4,5 m Weight approx.:18t+2t/m automatic tool changer:32-fach CNC controller:Siemens/Heidenhain/Fanuc/Mitsubishi Telescope cover for guideways:für die X-Achse Scales:in X- und Y-Achse (W-Achse) cloth cover:für die Y-Achse (JAVARA) CNC controls from:Siemens/Fanuc/Heidenhain different kind of milling heads:90°/5-Achs simultan/5-Seiten/Universal etc. CTS:40-70 bar heavy duty ram:550x550mm/650x650mm ATC:60/90/120

We are selling Gantry Portal milling machine. - Modumill. Linear and circular interpolation, milling, carding, drilling, thread cutting, portal moveable...

CNC Router and 3D engraving machine T-Rex 0712: Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 17.000 mm/min Operating speed max. ca. 12.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table1650 x 880 mm Travels: X=1200mm; Y=700mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions  ...

Drilling capacity: 32 mm X - axis: 0 mm Y - axis: 0 mm Distance between the columns: 0 mm Spindle taper: 0   MACH-id    5341 MAKE        Kaltenbach APS TYPE          APS 603 YOP            1999 SPECIFICATIONS Max. drill Ø steel       32 mm Spindle Taper ISO/Bt/Mk  MK ISO/Bt/Mk Power       25 kW DIMENSIONS Length      3500 mm Width       2000 mm Height       2600 mm

REIS gantry robot with substructure 1.8 m high, x approx. 10 m, y approx. 1 m, e.g. approx. 1 m 4-axis robot, very good condition, was only 4 years in operation.

Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected.

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Ident No. 247238 0001 Year of construction: 2000 Axis movement: 2400 mm Carriage length: approx. 500 mm Total length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders) - Standard linear guide 65 x 25 mm - Basic profile made of steel - Ball screw 32 x 10 mm- pneumatic with position indication - permanent servo motor type: MKD071B-061-KP1-KN (Part No: 261989, S. Nr. MKD071-50234, brake with 24 Volt DC) Overall dimensions L x W x H: 3520 x 400 x 580 mm Weight: 340 kg good condition; used

Gebr. Gantry crane 3.0to. Lifting height approx. 5m, track width 9510mm

10 TON GANTRY CRANE - 13.55 meter PUIL E&C P0061GANTRY CRANE GCH-107(SG-25) 10T x 13.55MS x 7.5MH Please note: This lot is subject to a buyer's surcharge of 10%, VAT might be applicable, and is sold subject to award. Make PUIL E&C Type GANTRY CRANE Year 2007 Capacity 10T x 13.55MS x 7.5MH

Offer 24042 Specifications: - Hoist DEMAG PK 2 N F, load capacity 250 kg - Load capacity gantry 250 kg - Hook height approx. 2850 mm - 2 lifting speeds 10.0 + 2.5 m/min - Manual trolley chassis - Passage between the driving stands approx. 3350 mm - Passage height lower edge of portal girders approx. 3220 mm - Driving beam approx. 1130 mm - 4 swivel castors - Total width approx. 4050 mm - Total depth approx. 1150 mm - Total height approx. 3420 mm - Drive 400 V - Total weight – crane + hoist approx. 250 kg

HIWIN HS22XD2YM2-1250-0550NNR-X 2-axis system X-Y X-axis: Profile width: 60mm Feed Constant: 155mm Timing Belt Axis Stroke/Overall Length: 1250mm/1775mm Slide: Type L, length 330mm Drive: prepared for gearbox g700-P44(Lenze) Wheelbase: 676mm-incl. Spacing Profiles Synchronous shaft: DM: 50mm - with couplings Y-axis: Profile width: 60mm Feed Constant: 155mm Timing Belt Axis Stroke/Overall Length: 550mm/976mm Slide: Type M, length 230mm Drive: prepared for gearbox g700-P44(Lenze) The gantry system is unused and has not yet been unpacked. Year of construction 07.2023

Tower with Ramo TPC gantry N°120 DESCRIPTION - Mechanically welded base, - Vertical cast iron bench, - Added slides in 60-62 HRC treated steel, - Fixed headstock with spindle on angular contact ball bearings, - 28 KW DC spindle motor at a reference speed of 2000 mm-1, - Double clamp for clamping parts, incorporated in the spindle, - Tightening of the part by spring, loosening of the part hydraulically, - CNC trolley controlled by SIEMENS motor and ball screw, equipped with a DUPLOMATIC SM-P16/12 indexable turret with 12 C4 stations, - Lubrication of the headstock by air/oil, - MECAFLUID centralized automatic volumetric lubrication of all moving parts of the machine, - Chip protector with closing and locking safety contact, - 220 V lighting - Watering controlled by solenoid valves, - SIEMENS 840D command director, color console on pivoting console, - Chip conveyor, disc ...

RAMO tower with TPC gantry No. 119 DESCRIPTION - Mechanically welded base, - Vertical cast iron bench, - Added slides in 60-62 HRC treated steel, - Fixed headstock with spindle on angular contact ball bearings, -28 KW DC spindle motor at the reference speed of 2000 mm-1, - Double clamp for clamping parts, incorporated in the spindle, - Tightening of the part by spring, loosening of the part hydraulically, - CNC trolley controlled by SIEMENS motor and ball screw, equipped with a DUPLOMATIC SM-P16/12 indexable turret with 12 C4 stations, - Lubrication of the headstock by air/oil, - MECAFLUID centralized automatic volumetric lubrication of all moving parts of the machine, - Chip protector with closing and locking safety contact, - 220 V lighting - Watering controlled by solenoid valves, - SIEMENS 840D command director, color console on pivoting console, - Chip conveyor,  ...

Gantry ladder DRABEST 2x5 steps

Description: X axis travel 11,000 mm Y axis travel 3,700 mm Z axis travel 3,000 mm RAM Z axis travel 900/100 mm Table size 12,000 x 3,100 mm SELCA S3045P control Serial number 275 Dig depth 1280 mm weight approx.: 213,800 kg, Approx. Onsite Dimension. (l x w x h): 26,800 x 8,200 x 6,000 mm

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Univ. Tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with hand wheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm infinitely variable feed X and Z-axis 5 - 1000 mm /min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinol shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 Volt, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine- Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition; used

SCM Swivel spindle milling machine - T110 i Product name: Swivel spindle milling machine Type: T110 i Manafacture: SCM Machine number: 071215 Year of construction: 1996 Condition: used, overhauled Technical details: - Table dimensions: 1,000 x 650 mm - Table height: 920 mm - Useful length of the milling spindle: 150 mm - Adjustment range of the milling spindle: 150 - 20 mm - Spindle diameter: 30 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm - Number of rings of the table insert: 5 pieces - Diameter suction nozzle: 120 mm, 2 pieces - Foldable Aigner integral stop - FRIED chip trapping and milling protection device - VARIOFEED feeder, 3 wheels - 2 x table extension, each 1,100 mm - Weight: 430 kg - Swivel range of the milling spindle: -5° to 45° Engine data milling machine: - Power: 4 kW - Voltage: 380 V - Current: 9 A - Frequency: 50 Hz ...

Complete CNC bed milling machine (2x 2.5°) 22/29 kW on spindle Longitudinal X-axis 3600 mm Moving Y Axis 1000mm moving Z-axis1600 mm Dimensions clamping table 4100 x 900 mm Insertion into milling head (ISO)BT 50 Max speed control; 2250 rpm Control Heidenhain TNC 426 Length 6120 mm Depth 5050 mm Height3150 mm Weight 19 tons 30-position automatic tool changer Cooling through the spindle Note: without machine clamps visible in the photos, these have lot numbers 167 to 172 in this auction 3 trucks needed for transport (estimated) Dismantling + loading cost by professional dismantling team: 9000 euros

Exchange units for contour milling HOMAG