CNC Router and 3D engraving machine T-Rex 0712:
Equipment / product data CNC-milling machine type High-Z/TRex
series:
Drive: 3 brushless brand stepping engines with
4,5 ampere.
Possibility of sliding through long and up to 120mm
high materials, no belt drive at the ende of the X axis!
Linear guide on all axis by HIWIN / THK !
Multiple ball-bearing ball-screw spindle on all axes, proprietary
brand!
Rapid traverse max. ca. 17.000 mm/min
Operating
speed max. ca. 12.000 mm/min
Technical definition X/Y :
0,005mm (1/10 Schritt); Z: 0,0025mm
Backlash maximal ca. +/-
10µm (0,010 mm)
Repeat accuracy: ca. 0,01 mm
Clampin surface of grooven panel / T-slot table1650 x 880 mm
Travels: X=1200mm; Y=700mm; Z= 130 mm
Non-contact reed sensors / reference switches / limit switches on
all axes
Double secured emergency-stop button
Energy
chains for a clean cable routing
Total dimensions
with engines : LxBxH ca. 1960 x 1300 x 1420 mm
Milling-engine
holder Euroneck Ø43mm
Milling-engine 1,05 kW /
1050 FME 5.000-25.000 U/min with 8mm collet ( optional 3mm, 6mm, 10mm,
metric )
incl. software WIN-PCNC USB (optional WINPC NC
Profi) and
CAD/CAM Software ConstruCAM-3D (full version incl.
post-prozessor for WIN PCNC)Software ConstruCAM-3D (full version incl.
post-prozessor for WIN PCNC)
Weight ca. 350 kg
Complete machine incl. 5 channel control 5 x 3,5 ampere, T-slot
panel, wear plate, remote control, software ConstruCAM-3D, WIN PCNC
USB and Kress milling engine 1050 Watt with 8mm collet !
A introduction, unlimited phone-support as well as our
Livesupport/remote maintenance via Teamviewer for lifetime are always
included in this complete unit.
An approximately
2-hour introduction with installation of the software on your PC
,brought with, as well as an explanation of the most important terms
of ConstruCAM-3D, WIN PCNC, Corel Draw etc. sare also possible and
obviously for free.
Technical data
regarding the included digital control, aligned to CNC-milling machine
TRex:
5-channel stepping engine CNC-control with newest
SMD technology
Mains voltage 115 - 240 Volt / 47 - 63
Hz.
Line-to-line current 5 x 3,5 ampere
Micro-step-control definition 1/10-Step / 2000 steps/rotation for
high quietness
5 connections for 5 brushless engines /
stepping engines
Connection from parallel port with
software WIN PCNC Light, Economy or via USB mit WIN PCNC USB or Profi.
(obviously also possible with MACH3, USBCNC, NC-Easy as well as LINUX
EMC and LINUX CNC and much more.)
"Sleep-Funktion" for
current reduction
Oscillation- engine-connection 24
volts, adjustable with PWM (for example tangential knives) optional 24
volts constant for holding break via ST-connection
Activation of 2 users up to ca. 1200 Watt via software switchable
(from WIN PCNC Light), 230 volts, max. 6,0 A per power socket (for
example compressor, cooling system, suction). Both power sockets
secured seperately.
12 Status-LEDs for operating
condition and all important funktions (Power, Toggle, Move, X, Y, Z,
C; overheating, emergency-stop, relays: spindle/cooling stystem, short
circuit)
Connectivity a total of 4 limit- or reference
switches plus a emergency-stop button
Engine
connection and control line via D-Sub 9-pol. (C-axis 15-pol.)
Emergency-stop button
overheating protection
short-circuit-proof; ready for operation
Germany
