british flag
Resale Logo

furnace used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information specialized in plastic recycle machines  HERBOLD MECKESHEIM GMBH  http://www.herbold.com 
banner logo
start page > keywords furnace > results
377 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
1 2 3 4 5 6 7 <  page 8  > 9 10 11 12 13 14 15 16
123448630 2000  

PIRANI 1900 for sale
Vacuum furnace 1900 ^ ° 150 x 200 mm


Vacuum furnace Pirani1900 ° oven size 150 x 200 mmfor parts or components

 
Vacuum furnace Pirani1900 ° oven size 150 x 200 mmfor parts or components
 
Price  
    request
65283163 109  

SAMAFOR Ø 81 mm for sale
induction furnaces


Extrusion of plastic tubes or profilesMax Ø 81 mmscrew Ø 60 mm33 kWInclud. Extrusion bench, Vacuumcooler, cutting device

 
Extrusion of plastic tubes or profilesMax Ø 81 mmscrew Ø 60 mm33 kWInclud. Extrusion bench, Vacuumcooler, cutting device
 
Price  
  BE   request
123383543 1300  

LOEWY HYDRO 1250 MT - DIA. 152 MM for sale
EXTRUSION PRESS & BILLET FURNACE


Qty. 1 Second-hand extrusion press Mfc.: Loewy Hydro Press Force: 1250 MT Built: 1954 Type: direct – hydraulic Billet dia.: 152 mm Length: 558 mm Main ram dia.: 812 mm Pressure: 3000 PSI Stroke: 1400 mm ...
used machine
 
Qty. 1 Second-hand extrusion press
Mfc.: Loewy Hydro Press Force: 1250 MT Built: 1954
Type: direct – hydraulic Billet dia.: 152 mm Length: 558 mm
Main ram dia.: 812 mm Pressure: 3000 PSI
Stroke: 1400 mm Two side cylinders Three tie rods
Fixed dummy block Castool One in stock
Container Mfc.: Castool Installed in 2015
Main pump Mfc.: Oilgear Revamped in 2005
Consist of: Billet furnace Extrusion press
1954
Price  
  DE   request
65283160 109  

SAMAFOR Ø 50 mm for sale
induction furnaces


Extrusion of plastic tubesMax Ø 50 mmScrew Ø 4511 kWInclud. Extrusion bench, Vacuumcooler, cutting device

 
Extrusion of plastic tubesMax Ø 50 mmScrew Ø 4511 kWInclud. Extrusion bench, Vacuumcooler, cutting device
 
Price  
  BE   request
123273301 109

AICHELIN DHGR for sale
Conveyor belt furnace for forged parts


Conveyor belt furnace for forged parts, make Aichelin revision: 2007 PLC: Siemens S7 heating: natural gas band width: 1.300 mm useable height: 200 mm consis ...
used machine
 
Conveyor belt furnace for forged parts, make Aichelin

revision: 2007
PLC: Siemens S7
heating: natural gas
band width: 1.300 mm
useable height: 200 mm

consisting of:

push-in device

payload: ca. 16 kg
cycle time: 12 s
dosage: 2.500 kg/h

conveyor belt annealing furnace

type: DHGR 950 - 130 / 1400
working temperature: 840 - 920°C
gross heating capacity: 2.500 kg/h
at 920°C
belt load capacity: 150 kg/m2
heated length: approx. 14.000 mm
connected load heating: 1.050 kW
burners number: 18 type WS
heating zones: 5

transfer device

payload: ca. 16 kg
cycle time: 12 s
dosage: 2.500 kg/h

tempering furnace

type: DHLG 700- 130 / 700 / 200
working temperature: 550 - 650°C
gross heating capacity: 3.700 kg/h
at 650°C
belt load capacity: 150 kg/m2
heated length: approx. 7.000 mm
connected load heating: 360 kW
burners number: 6 type WS
heating zones: 3
1991
Price  
    request
65283157 109  

YVROUD 94/07 116 Ø40 mm for sale
induction furnaces


Extrusion of plastic tubesmax Ø 40 mmScrew Ø 45Includ. Extrusion bench, Vacuumcooler, cutting device

 
Extrusion of plastic tubesmax Ø 40 mmScrew Ø 45Includ. Extrusion bench, Vacuumcooler, cutting device
 
Price  
  BE   request
123205489 702

WP MD 101 C 52 for sale
Multideck ovens


WP MD 101 C 52 deck baking oven Baker State 5 back floors 160 cm deep for 2 honing apparatus of depth of 160 cm Gas burner Technical data: Manufacturer: Werner & Pfleiderer Type: MD 101 C-52 Year of constru ...
used machine
 
WP MD 101 C 52 deck baking oven

Baker State

5 back floors 160 cm deep
for 2 honing apparatus of depth of 160 cm
Gas burner

Technical data:
Manufacturer: Werner & Pfleiderer
Type: MD 101 C-52
Year of construction: 1998
Gas burner
79kW EL.
400 volts 50 Hz

Dimensions outside:
Width: 185 cm
Depth: 270 cm
Height: 230 cm

Dimensions baking deck:
Width: approx 123 cm
Depth: 165 cm
Floor height from top to bottom:
2 x 20 cm; 1 x 22 cm; 2 x 16 cm

The furnace stands in a camp, close to Bielefeld.
Tour is possible by arrangement.
1998
Price  
    request
65283155 109  

ANDOUART Ø 26 mm for sale
induction furnaces


Extrusion of plastic tubesmax Ø 26 mmscrew Ø 6011 kWInclud. Extrusion bench, Vacuumcooler, cutting device

 
Extrusion of plastic tubesmax Ø 26 mmscrew Ø 6011 kWInclud. Extrusion bench, Vacuumcooler, cutting device
 
Price  
  BE   request
123205456 702

MIWE IDEAL 600/6 R-ZK for sale
Multideck ovens


MIWE IDEAL R 600/6 ZK Deck baking oven gas Baker State 6 baking floors approx. 160 cm deep for 1 sharpening apparatus Gas burner Technical data: Manufacturer: Miwe GmbH Type: Ideal R 600/6 ZK Year of const ...
used machine
 
MIWE IDEAL R 600/6 ZK
Deck baking oven gas

Baker State

6 baking floors
approx. 160 cm deep for 1 sharpening apparatus
Gas burner

Technical data:
Manufacturer: Miwe GmbH
Type: Ideal R 600/6 ZK
Year of construction: 2001

Dimensions outside without a hood:
Width: 100 cm
Depth: approx. 285 cm
Height: 265 cm

Dimensions back floor:
Width: 60 cm
Depth: 170 cm
Height: 17 cm

The furnace stands in a camp, close to Bielefeld.
He can be visited by appointment.





2001
Price  
    request
65283152 109  

ANDOUART Ø 26 mm for sale
induction furnaces


extrusion of plastic tubes or profilesMax Ø 26 mmScrew Ø 60 14 kWInclud. Extrusion bench, Vacuumcooler, cutting device

 
extrusion of plastic tubes or profilesMax Ø 26 mmScrew Ø 60 14 kWInclud. Extrusion bench, Vacuumcooler, cutting device
 
Price  
  BE   request
123156551 702

TAGLIAVINI ATLAS 2000/242-8 for sale
Tunnel furnaces


Two decks Baking surface 24m

 
Two decks
Baking surface 24m
 
Price  
  RS   request
65283150 109  

REIFENHAUSER Ø 30 mm for sale
induction furnaces


extrusion of plastic tubes or profilesØ 30 mm maxscrew Ø 60Includ. Extrusion bench, Vacuumcooler, cutting device

 
extrusion of plastic tubes or profilesØ 30 mm maxscrew Ø 60Includ. Extrusion bench, Vacuumcooler, cutting device
 
Price  
  BE   request
123070597 702

HAAS, COMAS, IMAFORNI 1000 for sale
Line for filled Biscuit


Line for the production of filled Biscuit HAAS, IMAFORNI, COMAS, HOUDIJK - rolling mill with demoulding roller and discharge conveyor of h - steel belt furnace by IMAFORNI, baking surface: 1.0 x 20 m, year built: 1976 -  ...
used machine
 
Line for the production of filled Biscuit HAAS, IMAFORNI, COMAS, HOUDIJK - rolling mill with demoulding roller and discharge conveyor of h - steel belt furnace by IMAFORNI, baking surface: 1.0 x 20 m, year built: 1976 - Ä?co, 23 burner, 9 above, 14 below, direct heat transfer - Transportba ND 180 ° by HOUDIJK, year: 1996 - liner by COMAS, with camera, year: 2011 icing sugar shaker - calibration unit - filling unit by COMAS - lifting and stacking unit for biscuit from COMAS - stacking unit for 2 products - manual acceptance of products - SIEMENS PLC St euerung capacity: 4,800 PCs. / h, 50 g
Working width: 1,000 mm
Weight: L 33,000 x W 1.000 mm
Kiln inlet: 8,000 mm
Kiln outlet: 5,000 mm

The plant is no longer in operation, but can be visited like to enquire and switched on.
2011
Price  
    request
65282943 109  

FUTURE CONTROLS MS-101 Injection mold-testing device for sale
induction furnaces


Mold Sampler: device for making prototype moulds. A plastic substance is heated and injected into the mould.mounted on mobile table incl accessoriespressure: 4-6kg/cm2

 
Mold Sampler: device for making prototype moulds. A plastic substance is heated and injected into the mould.mounted on mobile table incl accessoriespressure: 4-6kg/cm2
 
Price  
  BE   request
123070589 702

MIWE Ideal for sale
Deck Oven 15m² -Oil or Gas-


Used deck baking oven MIWE ideal two überholt-over with 12 months warranty! The following parts have been completely renewed: - steamers - injection tubes - circulating fan - built trains - steam button - wiring - s ...

 
Used deck baking oven MIWE ideal two überholt-over with 12 months warranty!

The following parts have been completely renewed: - steamers - injection tubes - circulating fan - built trains - steam button - wiring - solenoid valves - tubes - all seals (swaths, steering column, Flock) - all case fans - lighting - hood fan
-Insulation - new gas or oil burner on request at an additional cost (approx. EUR 2.000,-) - delivery only in one piece number of floors: 6 units
Baking surface: 15 m²

The furnace is in like new condition and is ready for use immediately. Visit by appointment.

The guarantee occurs only by connecting with us.
 
Price  
    request
65282141 107  

WEAN UNITED Contin. hot strip rolling mill (8 stands) for sale
profiling lines


This continuous hot strip rolling mill is ideal for high quality strip production starting from thick slabs. The hot strip mill takes the slabs from the reheat furnace and by reversing them through 3 roughing stands and ...

 
This continuous hot strip rolling mill is ideal for high quality strip production starting from thick slabs. The hot strip mill takes the slabs from the reheat furnace and by reversing them through 3 roughing stands and then through 5 finishing stands which reduces them to a thickness range from 1,5 to 10,5 mm. Material: carbon steel & stainless steel2 000 000 ton per year capacity = 166 666 ton per month capacityInput slab thickness range: 150 > 250 mmInput slab width range: 600 > 1560 mmInput slab length range: 4900 > 5500 mmOutput plate thickness range: 1,5 > 10,5 mmOutput plate width range: 600 > 1564 mmTotal roughing mill power: 12000 hpTotal finishing mill power: 23500 hpPrevious owner: Usinor FR (now Arcelor)Equipment was dismantled by Usinor. Cleaning & reconditionning by Danieli.Currently stored in the port of Antwerp & packaged ready for transportTotal net weight of equipment: 4337 ton – 5652 m3>> RoughersR1 - 4HI UNITED Roughing mill stand 33”/ 51” x 66” (no pinion stand, no gearbox and no motor)R2 - 4HI CLECIM Roughing mill stand 36”/ 53” x 66” with gearbox (1:6.32), 2x 4,000 Hp at 145 - 290 Rpm  DC motors with reactance (no pinion stand)R3 - 4HI UNITED Roughing mill stand 32”/ 53” x 66” with gearbox (1:9.71), 2x 4,000 Hp at 500 Rpm AC Synchronous motors with  reactance (no pinion stand) >> Finishing millsF1 - 4HI UNITED Finishing mill stand 25” / 49” x 66” with pinion stand and gearbox (1:5.61), 1x 4500 Hp at 200 - 355 Rpm DC motors with reactanceF2 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand and gearbox (1:3.17), 1x 5000 Hp at 171  - 345 Rpm DC motors with reactanceF3 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand and gearbox (1:1.90), 1x 5000 Hp at 155  - 310 Rpm DC motors with reactanceF4 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand - direct driven, 1x 5000 Hp at 108 - 230 Rpm DC motors with reactanceF5 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand - direct driven, 1x 4000 Hp at 135 - 270 Rpm DC motors with reactance>> Roll grinders (optional)28” CINCINNATI Roll grinding machine- max dia of rolls: 710 mm- max distance between peaks: 4270 mm- rotational motion of wheel: 25/30 hp – 600/800 rpm- head: 7,5 hp – 400/1600 rpm44” FARREL Roll grinding machine - max dia of rolls: 1549 mm- max distance between peaks: 5500 mm- forward motion of the grinding wheel: 2 hp – 1150 rpm- rotational motion of wheel: 40 hp – 1450/575 rpm- head: 15 hp – 300/1200 rpm- transmission: 3/5 hp – 300/800 rpmApproximalty 20 rollers between the roughers
 
Price  
  BE   request
122999220 702

FIAMMA FORNI 1000 for sale
Biscuit line


Fiamma Forni Biscuit line - YOM 1996 but complete rebuilt in 2010 . - 1000 mm working width . Consisting of: - Part 1: Sugar mill plant - with Cristall sugar Tank in Inox and integraded double scew conveyor - Do ...
used machine
 
Fiamma Forni Biscuit line
- YOM 1996 but complete rebuilt in 2010 .
- 1000 mm working width .
Consisting of:

- Part 1: Sugar mill plant
- with Cristall sugar Tank in Inox and integraded
double scew conveyor
- Double screw conveyor connected with
Sugar mill for Powder sugar
- connected with Powder sugar cyclon tank and
dust extraction
- connected with suction station on the plattform
over the Mixer
- with plattform for operating the system
- with Control panel
- Complete in stainless steel

Part 2: Fat dosing station 200 l
- With fat melting tank doubel wall with closed
water heating system
- Dosing pipe double wall for heating with warm water
- Water heating station with circulation Pump for
melting tank and pipes
- in stainless steel
- Electric control box
Part 3: Liquid flavour station
- With flavour tank
- with Pump
- with Pipes, valves and connected with control panel
- in stainless steel

Part 4: Mixer station
- HSM 300 mixer with automatic emptying.
Above the mixer is a dispensing system for flour and powder sugar
and the suction conveyor turbine for flour and sugar (height 5.2 m)
The liquid fat and flavour comes volumetric controlled over pumps, with SPS
control.
- Mixer bowl in stainless steel
- Double Z Kneader arms in stainless steel
- Double wall Mixer bowl for heating and cooling
- Capacity: 300 kg per batch
- With control panel
Part 5: Dough cutting and shredder station
- Transport belt for dough
- Cutting device
- Shredder device
- with control panel
Part 6: Dough transport belt to the vertical Laminator
- Working width: 1000 mm
- PU - belt colour white
- Variable belt speed over Inverter
- Connected with control panel
Part 7: Dough transport belt to the Rotary Moulder
- Working width: 1000 mm
- PU - belt colour white
- Variable belt speed over Inverter
- Connected with control panel
Part 8: Vertical Laminator
- Working width: 1000 mm
- Variable dough belt speed
- Variable dough thickness
- Variable drum speed
With dough hopper and level control
Part 9: Rolling mill
with 3 drums for laminated dough
- working width: 1000 mm
- Variable thickness
- Variable drum speed
- stainless steel
Part 10: Rolling mill
with 3 drums for laminated dough
- working width: 1000 mm
- Variable thickness
- Variable drum speed
- stainless steel
Part 11: Dough transport
- Working width: 1000 mm
- PU - belt colour white
- Variable belt speed over Inverter
- Connected with control panel
Part 12: Dough re-transport to the hopper
- Working width: 300 mm
- PU- belt colour white
- Variable belt speed
- Connected with control panel
Part 13: Rotary moulder
- Working width 1000 mm
- Variable speed
- Stainless steel frame
Part 14: Cutting device
- Vertical Cutting station
- Cutting impuls variable
- Stainless steel frame
- Connected with Control panel
Part 15: Fiamma Forni oven
- Working width: 1000 mm
- Baking length: 24000 mm
- Complete length: 30000 mm
- Solid steel belt from Sandvik
- YOM: 1996, overhauld in 2010
with 2 Gaz burners
- Indirect heating system
- Power gas burner I - II grade 81 KW - 232 KW degree
With belt cleaning device
Belt tension station and automatic belt control
Part 15: Cooling belt
- YOM: 2013
- Working width: 1000 mm
- PU- belt colour white
- Cooling length: ca. 30 m , 8 floors
- Sandwich panel Cooling box
- Incl. Cooling fan
Option:
There is for the line a 8 row Encrusting machine
for filled cookie. The Encruster can integrated in
a short time. You can change the Rotary moulder
and in the same place you put in the Encruster.
For change it is integradet a justagen device.
Complete length: 70 m
Complete width: 2.8 m
Complete high: 2.4 m
There is also needed place for:
fat container
syrup container
mixer for baking additives
platform for sugar application, under which the a grinder is placed
Outside, two flour silos with capacity of 32 t each ( Option )
The demand for electric power - 95 kW
Power gas burner I - II grade 81 KW - 232 KW degree
- Line capacity:
biscuits: 3000 - 3200 kg / 8 h,
crunch cokies: 2500 - 2800 kg / 8 h
Sprinkling sugar element
Glazur machine
Chimneys to the furnace
Water heating device (heat recovery system)
Hoods over the transporters remove the heat (3 pieces)
1996
Price  
    request
65282101 109  

NETSTAL N235-90MP injection moulding for sale
induction furnaces


clamping force 900 kNinjection force 196 kNopening space 125 - 300 mmmould space 200 - 500 mmincluding:tempering unithopper / mixerwithout tooling----------------------------------- ? ?: 900 kN? : 196 kN ? ?: 125 - 300 ? ...

 
clamping force 900 kNinjection force 196 kNopening space 125 - 300 mmmould space 200 - 500 mmincluding:tempering unithopper / mixerwithout tooling----------------------------------- ? ?: 900 kN? : 196 kN ? ?: 125 - 300 ? ?: 200 - 500
 
Price  
  BE   request
122893812 1200  

SISTEM TEKNIK DOG-1800-807-0316 for sale
INDIRECT GAS HEATED DIE OVEN


Qty. 1 Second-hand indirect gas heated die oven Mfc.: Sistem Teknik Type: DOG-1800-807-0316 Built: 2004 Inner dimensions: 3.86 x 0.6 x 074 m – L x W x H Volume: 1096 dm³ Capacity: 14 dies/charge (1400 kg) Operat ...
used machine
 
Qty. 1 Second-hand indirect gas heated die oven
Mfc.: Sistem Teknik Type: DOG-1800-807-0316 Built: 2004
Inner dimensions: 3.86 x 0.6 x 074 m – L x W x H Volume: 1096 dm³
Capacity: 14 dies/charge (1400 kg)
Operating temp.: 450 °C +/- 5°C Max. temperature: 550 °C
Installed power: 215.000 kCal/h + 5.1 kW
Charging materials: Extrusion dies made of AISI H13 2344,
Dia. 480 mm, T= 190 mm, M=100 kg
2004
Price  
  DE   request
65282098 109  

NETSTAL N235-90MP injection moulding for sale
induction furnaces


clamping force 900 kNinjection force 196 kNopening space 125 - 300 mmmould space 200 - 500 mmincluding:hopper / mixerconveyorwithout tooling-------------------------------------------- ? ?: 900 kN? : 196 kN ? ?: 125 - 30 ...

 
clamping force 900 kNinjection force 196 kNopening space 125 - 300 mmmould space 200 - 500 mmincluding:hopper / mixerconveyorwithout tooling-------------------------------------------- ? ?: 900 kN? : 196 kN ? ?: 125 - 300 ? ?: 200 - 500
 
Price  
  BE   request
<  page 8  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(18)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country