furnace used for sale

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Deck baking oven W & P, type: Matador MD 101 - In the bakery State - 5 floors - 2 thermal circuits (upper 2 burners and bottom 3 flock) - oil burner weishaupt - 1 stone slab broken but spare available - regular maintenance - last 2016 - in one piece (mounted) -in the bakery condition - condition: good baking surface: 9.6 m2 Hearth size: B T 1.60 x 1.20 m The furnace is located in the bakery. An application is possible in one piece and can be applied on request, like us.

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Electrode furnace, electric 220 V

Gas-heated annealing and hardening furnace make SCHNEIDER GmbH Witten type 6 KMachine -No: 31 built in 2002Technical specifications:Chamber size W x D: 1200 x 900 mmin the rear part of the chamber step downwards: depth 500 x height 400 mmOpening W x H: 1200 x 470 mmmax.temperature: 1300 °Connected load: 300 kWHeating medium: natural gasExternal dimensions approx. W x D x H: 2200 x 2600 x 2650 mmWeight: 5850 kgWith- MEILI hand winch for opening the oven door- Attention without switch and control cabinet!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Qty. 1 Second-hand aluminium vertical billet casting plant Mfc.: Wagstaff, Tongrun, Stas Built: 2012 Stopped: 2016 Billet dia.: Line 1: 101.5 – 228.6 mm (4” – 9”) Length: 6300 mm Dia. 101.5 mm – 112 Strands Dia. 127 mm – 76 Strands Dia. 152.4 mm – 112 Strands Dia. 177.8 mm – 72 Strands Dia. 203.2 mm – 62 Strands Dia. 228.6 mm – 50 Strands 1 Qty. 1 Second-hand vertical billet casting line – LINE 1 Molding tables for vertical casting of Aluminium billets of 112 billets with 101.5 mm, 127 mm or 152.4 mm in dia. Other table with 72 billets of 177.8 mm, 203.2 or 228.6 mm in diameter 2 Qty. 2 Melting Furnaces with 60 t capacity/each, and 8 t/h fusion rate, Natural Gas, Regenerative System, Manufaturing by Tongrun in 2011 – China. 3 Qty. 3 Homogenising Furnaces, with 35 t/each for billet, Natural Gas, Cycle 8 t/h average. 4 Qty. 1 Holding  ...

1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.

1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

Qty. 1 Second-hand strip casting production line Mfc.: EMA-Indutec, Marx, Air Blue, Güntner, Demag, G. Buchholz Built: 1992, 1995, 1997, 1999, 2000 Income material: Scrap Strip width: 300 mm Thickness: 10 – 20 mm – can be reduced! Plate length: 16 m can be extended! Coil weight: 1.5 T (steel) Scope of supply: Induction crucible furnace 20 kV Transfomer Cooling unit Casting machine Duo Mill Stand Coiler Run-out table Quenching Compressor

MIWE Floor Furnace Thermo-Express Type: 1000/5 Number of stoves: 5 Herd dimensions/cm: 120 x 160 Two-circuit 1+2/3-5 Baking floor/m2 approx.: 10 with pull-out stove in the 1st stove 200mm with digital control MIWE-DS with standard hood and fan Built: 2000 MIWE Boiler Control Centre Type: HKZ 80 installed in the control cabinet Oil connection: rear Permissible oil temeparture: 320 °C with drain tank with frame for thermal oil containers Built: 2000

Romer Immediately available Gravitational Furnace SLS-9 New - Exhibition Price from 6,900 € Net + Freight

Used multi-story continuous furnace W&P, type: Megador - 7 floors - Top and lower heat can be controlled independently of each other - Net band - Swarming - Touchscreen - WITHOUT boilers, burners and loading - Baking area 120 m2 The oven is out of service. Visit and test run are possible at short notice by arrangement.

Powder coating line: 1. Chain conveyor 2. Continuous painting furnace 3. Pass-through spray booths connected to the paint recovery system: 3 pcs. 4. Pass powder cabins without recovery: 3 pcs / pass-through spray booths without recovery: 2 pcs. 5. Manipulator (up & down movement) with powder sprayer: 1 pc. Automatic manipulator (up-down) with paint applicator: 1 pc. 6. Powder sprayer: 1 pc/ powder paint applicator 1 pc.

Powder incineration oven 3,500 x 1,900 x 2,000 mm electric 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration oven 4,500 x 1,900 x 2,000 mm electric 1 inner dimension length 4,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m3/hr 10 Electric motors 2 pcs. 2x 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 74 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual f ...

DESKTOP METAL STUDIO SYSTEM 2 3D printer (year 2018) Ideal printer for printing high-performance metal parts in the office. Desktop Metal’s Studio System 2 Metal 3D Printer extrudes a metal filament (in the form of rods) to create the desired geometry. You don’t need a removal step for the plastic binder that holds metal dust in a filament (or associated equipment) when printing with 316L stainless steel. Impressions from the Studio system are transferred directly to the accompanying furnace, which first heats the parts to remove all binders from the parts, then increases the temperature to nearly melt for sintering. This printer is working and live demo can be done. Work hours: Printer: 164 jobs x 10h = 1640h Debinder: 46 jobs x 18h = 828h Furnance: 21jobs x 48h = 1008h Includes software and transformer to convert the American frequency into European.

Floor oven Wiesheu EBO 5-128 Floor oven Wiesheu EBO 5-128 -with hood including fan -with base -5 herds each 120x80cm -each stove with stone slab -digital Wiesheu Comfort control -Upper and lower heat can be controlled separately -with fixed water connection for each floor seperat -Each floor with separate swath box for swaths -Each floor with exposed glass -Each floor with lighting -Built in 2014 -Connection per floor 9.9 kW -Total connection power 49.5 kW -400 Volt 3/N/PE 50 Hz -Oven is mobile on wheels -prud and cleaned The furnace is fully assembled Ready for loading in stock.

oven 1100 1.5x1.5x2m t max 1150 150kw auto door auto bogie PLC Haubenofen Schachtofen Sonderanlagen Härt en GlühenNormalisieren Weichglühen Isothermglühen Vergüten Anlassen Entspannen Hubschritt-Kettenförderofen Ringherdofen Kammerofen Durchstoßofen Drehherdofen buerstlein Rollenherdofen Gußplattenbandofen Reinigungsanlagen Schutzgaserzeuger Ofenanlagen zum Homogenisieren von Aluminium Kammerofen zum Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Fore ...

oven 650 Injection Mould Mold furnace temperature range 10 - 650 Celsius 1x1x1m (various possible) Kammertrockenöfen Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen temperaturi te polaganim hlanenjem. Na ovoj povišenoj temperaturi u materijalu nastaju plastične deformacije te se unutarnja naprezanja izjednačuju. Nitriranje je postupak sličan je cemetiranju, gdje se površina dovodi u kontakt sa strujom dušika koji se veže sa željezom te tvori vrlo tvrde kristale željeznog nitrida (Fe4N). Ovako dobiveni površinski sloj vrlo je tvrd i otporan na trošenje. Nitriranjem se povečava dinamička čvrstoćai otpornost prema  ...

ZINCALUM LINE FATA PRODUCTION MACHINERY Manufacturer: FATA PRODUCTION MACHINERY YOM: 1990 Main Equipment: 2 Uncoilers Entry lap welder (Taylor Winfield) 6 Strands Horizontal Entry Accumulator Horizontal Annealing Furnace (Non Ox Heating Section – Radiant Tube Soaking Section: 1 Jet Cooling –Sow Down Cooling Section, Down Chute with electrical heaters AJAX Pre-melt Pot (7 MT) – heated by Two 300 KW channel type inductors AJAX Coating Pot (60 MT) - heated by Four 300 KW channel type inductors. 3roll type Rig. KHOLER Air knives Coating thickness measuring (DMC) 6 Hi Leveller Chemical treatment (Inmersion Tank) Oiler Flying Shear 2 Tension Reels with edge control Strip width range 610 – 1220 mm Strip thickness range 0.30 – 0.85 mm Coil weight entry zone Max 18 MT Coil weight delivery zone Max 9 MT Maximum speed 120 m/min ZNAL  ...

Line for pouring water or other liquids in 2 L packages The line consists of: - PET bottle blower from Sidel SBO 4 - the feeding tunnel of the bottles of own production - Pourer Nagema BF-60 with bottle screwdriver 12 head - Nagema saturator type KOMI - Spomasz label - bottle packer with control cabinet - electric welding furnace + fan for cooling the welding machine - Pragometal pallet wrapper Used machines, for technical inspection It is possible to contact the buyer with the company performing inspections and relocation of machines.

degree: 1150 working heigth: 200 mm length: 1000 mm width: 800 mm depth: 1400 mm Coil Weight per Base: 300 kg Base Diameter: mm Stack height: 0 mm No. – Furnace: 0 No. – Base: 0 No. – Cooling Hood: 0 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

Thumm SU100 P Current UV Immersion Impregnation System with Exhaust Air Purification System Current UV impregnation is an innovative immersion process for low-voltage round wire windings. In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow. When dipping the heated winding, the impregnating agent becomes thin and can thus penetrate into the smallest cavities. With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can drain off again after immersing on the cooler sheet metal package. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the sheet metal package. By eliminating conventional furnace drying, energy and time are saved. Together with the use of a low-emission impregnating agent, the en ...

Semi-automatic for the production of PET bottles - ZENTRONIK ZR-7 with two forms. The device is used for the production of PET bottles from semi-finished products. 1. Heating furnace for heating PET preforms - 24 kW (dimensions: 1500mmX50mmX1320mm) 2. Semi-automatic PET bottle making machine (dimensions: 1900mmX630mmX1420mm) 3. Bottle mold: single hole mold for 5 liter bottle. ATTENTION! It is possible to convert the machine into a different bottle format for a fee, e.g. a 0.5-liter double-cavity bottle or any other shape and capacity depending on the needs of the buyer. Technical condition: very good as new

Specially designed for small businesses and rim coaters. Plant complete consist of: Powder furnace width X height x depth 1200 x 1600 x 1200 mm 15 KW Powder cabin width X height x depth 2000 x 2240 x 920 Latest powder gun from romer ProfiGun PM-1 All together for 10,900.00 net plus freight costs and assembly Delivery time approx. 16 weeks.

Bakery oven, Wiesheu Dibas 64-L with base and self-cleaning Convection oven Wiesheu Dibas 64L with self-cleaning and base, in-store oven Year of manufacture 2012 Second-hand plant Accessories: Steam Capacitor composed of: Convection oven Wiesheu Dibas 64L The device is used but in very good condition, refurbished for 10 baking trays (60x40) 1 x Base 1x exhaust hood (steam condenser) 2x engine gaskets NEW 2x heating coil seals NEW 1x Water Pump Gasket NEW Menu operation - German, English. Other languages possible. The device is fully functional. The baking station has been checked for electronic and mechanical capabilities. Dimensions: Width 93cm, Depth 93cm, Height 215cm Weight: approx. 400kg Condition: see original pictures Decorative items are not included in the scope of services. The furnace has been cleaned, inspected an ...

Bakery oven, convection oven MIWE AE 10.0604 Steam generator with steam apparatus With the following configuration: Oven color: Black MIWE aero type 10.0604 Number of editions 10 Baking area approx. 2.4 m2 Door hinge left Heat-insulating glazing 2-fold heat-insulating glass Colour of the front glass pane black (RAL 9005) FP12 Program Control Mechanical door lock Water meter yes easy clean function yes electrical voltage 400/230V; 3/N/PE 50 Hz Electrical standard Europe Electrical installation of own supply line Temperature display in degrees Celsius Connection cable length 2.5 m Total component power 19,800 kW Plug CEE plug, 32 A Language MIWE manual German Total connected load 20,000 kW Condition: see original pictures Decorative items are not included in the scope of services. The furnace has been cleaned and chec ...

Automatic gas-atmosphere exchange system and ultra-high-vacuum-high-temperature furnace for thin tubes for molecular cleaning at 12 stations for thin tubes from 2mm diameter to 120cm in length and conditioning or replacing the gas atmosphere inside the tubes in one pass

Electric horizontal high-temperature baking or sintering furnace with quartz tube carrier and adjustable gravity support as well as adjustable sintered atmosphere For up to 6 carriers a 195cm x 3cm simultaneously

Wiesheu convection oven Type: B4 E2 IS500 for 5 sheets 60x40 sheets with clipboard 4 runs for 60x40 sheets Control IS 600 Exhaust hood completely stainless steel cladding Door stop left Stove year of construction 2004 Technical data furnace: 400V - 50Hz - 13A - 9.2 kW Dimensions: Height: approx. 200 cm Width: approx. 96 cm Depth: approx. 90 cm

Hydr. Furnace pipe pulling machine make SCHNEIDERYear of construction 1994Working range: 60 - 220 mmWorking stroke: 120 mmElectricity requirement: 0.75 kWDisplacement of the tube counterholder: 750 mmPower connection: 380 V / 50 HzOutside dimensions approx: 2000 x 750 x 1570 mmWith- 14 pulling tools: 60; 70; 80; 90; 95; 100; 120xa0xa0 130; 140; 150; 170; 180; 200; 220 mm- Manual operation- Automatic mode- Two-hand releaseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

With warranty 12 months, immediately available - T max 150°C, increase to 250°C possible on request - Inside W 1000 x D 1000 x H 1500 mm - Outside W 1864 x D 1560 x H 2440 mm - Capacity 1500 liters - Inlet rails, for feeding the furnace with a loading rack - JUMO DICONtouch (10 programs with Ethernet interface) - Weekly timer - with exhaust fan 360 m³ / h - Door limit switch - Recirculating air fan, switch-off when the door is open, with time monitoring and fan overrun - Temperature limiter - Horn incl. light - Heating capacity 17.4 KW - Weight: 760 kg - Documentation, CE declaration, e-plan We are happy to offer installation and commissioning. We stock new and used industrial furnaces. Get in touch with us! Viewing in our warehouse by appointment.

Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

used shared shop oven Wachtel Piccolo I-5 DMS 3 Master Timer from year of construction 2011 is immediately available for sale in the warehouse in Bielefeld. The furnace is tested for function and cleaned. -5 floors each 60x80cm -each floor with separate control -each floor with upper and lower heat separately adjustable -each floor has its own steam box for steam -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction 08/2011 -electrical power supply 26.9 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 237cm

HEF Durferrit Line - carburizing, quenching and tempering Nitrocarburizing in a salt bath and hardening of steel parts. Technology for saturation in a liquid medium of cyanide salts, consisting of: -SWQ 60/80/90 and - Salt bath for quenching and tempering -STC 35/80- Electrode furnace for carburizing, hardening and annealing -LSU 60/70- Salt bath for carburizing, hardening and annealing In this technology, the surface layer of the materials is saturated with small amounts of nitrogen and carbon in a temperature range from 480 ° C to 630 ° C. Bath size - 350 x 800 mm Basket size – Ø 300 mm x H 300 mm Saturation of the surface layer with carbon and nitrogen at a depth of 0.4 ÷ 0.6 mm Hardness HRC 64 ÷ 66 Maximum dimensions of details for cementation: Lmax = 550 mm, Ø 300 mm

Packing flour in formats: 500g - size of the base of the bag 50x80 1000g-size of the bags base 70x100 1000g - the size of the bags base 70x90 The heating furnace of the Italpack company Grouping formats: 500g packages: 2x4 2x5 2x6 1000g packages: 2x4 2x5 2x6

Throughout the entire period of operation, it served without failure. Only required periodic maintenance. The brand needs no introduction, as it is among the best manufacturers in the world. Technical data available at the following link www.giesen/w1-series/ Furnace available for immediate inspection in Warsaw

Throughout the entire period of operation, it served without failure. Only required periodic maintenance. The brand needs no introduction, as it is among the best manufacturers in the world. Technical data available at the following link: www.giesen/w15a-coffee-roaster/ Furnace available for immediate inspection in Warsaw

Pull-off trolley with pull-off apparatus for 60cm stove depth Ovens NEW 10 pieces of pull-off apparatus furnace pushers External dimensions: approx. 80x91 cm Band width: 76 cm Puller can buy times 1 to 10 pieces or more Car is completely made of stainless steel -with 10 editions -5th edition is extendable Exterior dimensions of wagons Width: 100cm Depth: 84cm Height: 179,5cm

Manufacturer: Fata Production Machinery (1995) Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing Furnace (Selas) Flying Exit Shear 2 Tension Reels Line Capacity: 60.000 MT/year Maximum Process Section Speed: 113m/min Maximum Entry Section Speed: 136 m/min Maximum Strip Thickness: 0.28 mm Minimum Strip Thickness: 0.17 mm Maximum Strip Width: 1000 mm Minimum Strop Width: 700 mm Maximum Coil Weight: 18 MT Crew: 4 Operators

Description Furnace for heat treatment of plastic materials internal compartment: 1.5 m3 internal measurements: 1000 x 1000 x h 1500 Internal casing loading/capacity: 400 Kg nominal temperature: 250°C maximum absorbed power: 29 Kw equipped with n. 2 trolleys for materials, loading platform, new spare door seal

Manufacturer: Gietart Type: GW 1530-425 Year of construction: 1979 Location: Papenburg Operating hours: approx. 7,150 blasting hours (from 2001 onwards) Components: 1. Support crane 2x3,2 to. with Truninger profile magnet system (optional) 2. 5 transverse transports approx. 10.50 m 3. 13 m inlet roller table 4. Preheating furnace with 4x80 kW thermal power Bottom/Top 5. Gietart blasting system GW 1530-425, YOC 1979, (W:1,5mxH0,4m), 4 x 18,5kW centrifugal units 6. Gietart Lackiercenter BJ 2000 7. Drying tunnel approx. 10 m 8. Chain conveyor approx. 13 m 9. Color filter Donaldson Torit DFT 3-12 BJ 2000 incl. Precoater 10. Jet filter Donaldson Torit TD 6120 - 0 incl. afterfilter (police filter) for indoor installation 11. 13 m roller conveyor 12. 5 transverse transports approx. 6 m 13. Crane system 2x3,2 to. with Demag magnet system (optional) The complete plant was ...

Electrically heated tempering furnace make HERAEUS GmbH Hanau type HM 13Machine -No: 28024, wiring diagram no. 1641Max. Nominal oven temperature: 1150 °Internal dimensions W x D x H: 400 x 650 x 250 mmRated power: 20 kWExternal dimensions: 1500 x 1300 x 1700 mmWeight: 940 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electrically heated tempering furnace make HERAEUS type HM 13Machine no .: 21103283 / 2832-01 Year of construction 1980 m. Inert gas annealing muffleMax. Nominal oven temperature: 1150 °Max. Inert gas muffle: 920 °Internal dimensions: 400 x 250 x 650 mmRated power: 20 kWContent of the gas-flushed room: 68 lOutside dimensions: 1385 x 1915 x 1705 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric Hardening Furnace Fabr. NOLZEN Type KHR 30/20/50Machine No: 12272 Year 1968Internal dimensions: 300 x 200 x 500 mmMax. Temperature: 1100 °Max. Connected load: 14 kWOutside dimensions: 850 x 950 x 1600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric hardening furnace Fabr. LEADING type KMO / E 8Machine -No: 301077/89 Year 1989Max. Temperature: 1.200 °Internal dimensions W x H x D: 500 x 315 x 800 mmDrive value: 25.5 kWExternal dimensions L x W x H: 1700 x 1500 x 2100 mmWeight approx: 2000 kgWith- automatic pneumatic doorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric Hardening Furnace Fabr. PEDE Type M 3 / SFabr. -No: 1075 Com. -No: 5875 Year 1987Max. Temperature: 1200 °Internal dimensions approx: 280 x 200 x 700 mmOutside dimensions approx: 980 x 1100 x 970 mmElectricity requirement: 13 kWPower connection: 380 V / 50 HzWith- Timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Zinc melting furnace RAUCH ZSO 450 BMasch. -No: 70112/836597 Year of construction 1997Technical specifications:Max. Temperature: 450 degreeHeating output: 96 kWWeight approx: 1300 kgWith- 1 control cabinet- ZFB conveyor belt including drop chuteusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools