391 offers

Category: 1300: other machines and plants
New in: 1997
Price: 4.500 €
Location: Land-DE Germany, 21493 Schwarzenbek
Seller: Beppo Bercht Werkzeugmaschinen

Volume 0.59 m³ Steam room 1.99 m³ Temperature range 80 ° 300 ° C Operating voltage 400 V Rated power 42 A

Category: 825: pre press: other
New in: 2001
Price: request quote
Location: D - Brandenburg
Seller: 3p Vertriebsgesellschaft mbH

Firing furnace for plates up to A2 format Mileage of the panels is increased and thus costs and setup time reduced ideal for roles and endless pressure machine 220 power supply; good

Category: 209: other wood working machines
New in: 2000
Price: 12.500 €
Location: Strakonice
Seller: Dematech s.r.o

Enamelled Tänker/container can be used for the storage of liquid and dry bulk. Tanks are also an essential component of environmental technologies such as sewage treatment and biogas plants. The email / the enamel is a solid, smooth and glossy coating borosilicate glass, which is fused to metal. The enamel is two-layer and is burned in a continuous furnace at a temperature higher than 800 ° C. The shell of the cylindrical shell of the tank consists of two-side coated plates that are connected and sealed with permanently elastic sealing compound by special screws. The fixings and accessories of the mantle are also coated with a surface coating. The above-ground tank/basin of beidenseitt ...

Category: 109: other metal working machines
New in: used
Price: 6.900 €
Location: Europa - Ungarn
Seller: Telkes Gép GmbH

Electrical power: 5 x 18.5 kW Pass channel: 110 x 50 cm max. Temp.Ofen: 80 degrees Dimensions: 9.7 x 1.9 m Without trans sport band! No control!

Category: 2000: spare parts
New in: used
Price: request quote
Location: Mannheim
Seller: Techno-Commerce GmbH

Vacuum furnace Pirani1900 ° oven size 150 x 200 mmfor parts or components

Category: 1300: other machines and plants
New in: 1954
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand extrusion press Mfc.: Loewy Hydro Press Force: 1250 MT Built: 1954 Type: direct – hydraulic Billet dia.: 152 mm Length: 558 mm Main ram dia.: 812 mm Pressure: 3000 PSI Stroke: 1400 mm Two side cylinders Three tie rods Fixed dummy block Castool One in stock Container Mfc.: Castool Installed in 2015 Main pump Mfc.: Oilgear Revamped in 2005 Consist of: Billet furnace Extrusion press

Category: 702: breadmaking and confectionery machines
New in: 2001
Price: request quote
Location: Bielefeld
Seller: AY-BACK Technik Bäckerei & Gastronomiemaschinen

MIWE IDEAL R 600/6 ZK Deck baking oven gas Baker State 6 baking floors approx. 160 cm deep for 1 sharpening apparatus Gas burner Technical data: Manufacturer: Miwe GmbH Type: Ideal R 600/6 ZK Year of construction: 2001 Dimensions outside without a hood: Width: 100 cm Depth: approx. 285 cm Height: 265 cm Dimensions back floor: Width: 60 cm Depth: 170 cm Height: 17 cm The furnace stands in a camp, close to Bielefeld. He can be visited by appointment.

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-rs RS
Seller: Interfaces doo

Two decks Baking surface 24m

Category: 702: breadmaking and confectionery machines
New in: 2011
Price: request quote
Location: Land-DE Germany, 99334 Kirchheim
Seller: In.Ha.TEC Vertrieb & Service UG

Line for the production of filled Biscuit HAAS, IMAFORNI, COMAS, HOUDIJK - rolling mill with demoulding roller and discharge conveyor of h - steel belt furnace by IMAFORNI, baking surface: 1.0 x 20 m, year built: 1976 - Ä?co, 23 burner, 9 above, 14 below, direct heat transfer - Transportba ND 180 ° by HOUDIJK, year: 1996 - liner by COMAS, with camera, year: 2011 icing sugar shaker - calibration unit - filling unit by COMAS - lifting and stacking unit for biscuit from COMAS - stacking unit for 2 products - manual acceptance of products - SIEMENS PLC St euerung capacity: 4,800 PCs. / h, 50 g Working width: 1,000 mm Weight: L 33,000 x W 1.000 mm Kiln inlet: 8,000 mm Kiln outlet: 5,000 ...

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Österreich
Seller: In.Ha.TEC Vertrieb & Service UG

Used deck baking oven MIWE ideal two überholt-over with 12 months warranty! The following parts have been completely renewed: - steamers - injection tubes - circulating fan - built trains - steam button - wiring - solenoid valves - tubes - all seals (swaths, steering column, Flock) - all case fans - lighting - hood fan -Insulation - new gas or oil burner on request at an additional cost (approx. EUR 2.000,-) - delivery only in one piece number of floors: 6 units Baking surface: 15 m² The furnace is in like new condition and is ready for use immediately. Visit by appointment. The guarantee occurs only by connecting with us.

Category: 702: breadmaking and confectionery machines
New in: 1996
Price: request quote
Location: EU
Seller: bak-tec-Industries GmbH

Fiamma Forni Biscuit line - YOM 1996 but complete rebuilt in 2010 . - 1000 mm working width . Consisting of: - Part 1: Sugar mill plant - with Cristall sugar Tank in Inox and integraded double scew conveyor - Double screw conveyor connected with Sugar mill for Powder sugar - connected with Powder sugar cyclon tank and dust extraction - connected with suction station on the plattform over the Mixer - with plattform for operating the system - with Control panel - Complete in stainless steel Part 2: Fat dosing station 200 l - With fat melting tank doubel wall with closed water heating system - Dosing pipe double wall for heating with warm water - Water heating station wi ...

Category: 109: other metal working machines
New in: 1984
Price: 1.499 €
Location: Land-de Germany, 12055 Berlin
Seller: GambTec

; ready for use

Category: 1200: machines and plants for process engineering
New in: 2004
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand indirect gas heated die oven Mfc.: Sistem Teknik Type: DOG-1800-807-0316 Built: 2004 Inner dimensions: 3.86 x 0.6 x 074 m – L x W x H Volume: 1096 dm³ Capacity: 14 dies/charge (1400 kg) Operating temp.: 450 °C +/- 5°C Max. temperature: 550 °C Installed power: 215.000 kCal/h + 5.1 kW Charging materials: Extrusion dies made of AISI H13 2344, Dia. 480 mm, T= 190 mm, M=100 kg

Category: 2500: miscellaneous
New in: used
Price: request quote
Location: Land-it IT
Seller: STOCKEUROSTOCK SRL

USED POWDER PAINTING PLANT IN EXCELLENT CONDITION COMPOSITION : POWDER PAINTING BOOTH WITH SELF-CLEANING FILTER STATIC POLYMERIZATION FURNACE OVERALL DIMENSION 6600x4200x4600 Height) IN THE FURNACE THE POWDER extraction takes place from below MANUAL MONORAIL AIR CONVEYOR COMPLETE WITH MANUAL HANGING PIECES TRANSFER ELECTRIC PANEL ELECTRICAL CONNECTIONS DEVICES FOR AIR AND FUMES EXAUST MAX DIMENSION OF HANGING PIECES : Lenght 5000; Width 200; Height 2500 IF REQUESTED WE CAN REASSEMBLE AND PUT IN OPERATION THIS PLANT

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: 1998
Price: request quote
Location: Karlsruhe
Seller: Ing.-Büro Friedhelm Woerz

SCHMID Holzheizungs plant type Pyrotronic UTSH 450/480 Set up the plant in the container all-inclusive SCHMID storage container with hydraulic moving floor and snails feed System complete with all installations Lower thrust-combustion plant Time until 2014 - since then stops Heating output 480 kW Hot water production Fuel: rough and wet shavings, wood chips up to 40% HF Best measurement results: Dust content: 0,04 g / cbm in flue gas temperature of 170 ° c. Operation pressure 3.5 bar Water content 1 200 LTR. Permissible operating temperature 120 degrees C Under batch furnaces Stoker snail Cellular wheel sluice Dosing Auger Flue gas dedusting Circulating pumps warm ...

Category: 702: breadmaking and confectionery machines
New in: 2011
Price: request quote
Location: Bielefeld
Seller: Güzel Taceddin

consisting of a convection oven and 2 deck ovens: with exhaust hood both floors with digital scroll control (IS control) Convection oven / convection ovens is for 6 trays 60 x 40 cm convection oven 400V 3/N/PE Power 9,2 kW IP-protection class IP X 4 Multi-deck ovens are 68-320 IS 600 type EBO 2 floors each 60 x 80 cm with steaming year 2011 400V / 50 HZ / together 10,3 kW Furnaces are on a proofing Cabinet Proofing Cabinet is for 10 sheets on castors with brake

Category: 109: other metal working machines
New in: 1977
Price: request quote
Location: A - Oberösterreich
Seller: AUER

Category: 109: other metal working machines
New in: 1992
Price: request quote
Location: TRNAVA
Seller: FORMEX SK s.r.o.

Maximum temperature 1100 C, Interior 400 x 200 x 400 mm more info on request

Category: 109: other metal working machines
New in: 2000
Price: 1.900 €
Location: D - Berlin
Seller: GambTec

; ready for use

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Dortmund
Seller: VEI-Engineering GmbH

Shaft furnace, make Borel useable dimensions: diameter 700 mm height 1.400 mm max. temperature 850?C total power: 66 kW

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Dortmund
Seller: VEI-Engineering GmbH

Continuous ageing furnace, make VEI-Engineering type: KADL 2 120 x 240 tracks: 2 furnace output: approx. 2.000 kg/h gross heating zones: 2 gas heated, 3 electrically heated max. temperature: 280°C working temperature: 180 - 200°C useable dimensions (l x w x h): 15.250 x 2.530 x 2.200 mm external dimensions (l x w x h): 28.500 x 5.800 x 6.200 mm

Category: 702: breadmaking and confectionery machines
New in: 1996
Price: request quote
Location: Sachsen
Seller: Heim Bäckereitechnik

For sale is an oven system consisting of: 1 used deck oven Miwe ideal 10 sqm 1 used deck oven Miwe ideal 8 sqm 2 used rack Miwe roll in 1 used fermentation breaker Miwe (must be decomposed) Sale dismantling in 1 week either at site bakery - furnaces go out completely - 2018 or alternatively sell from stock, free truck

Category: 2500: miscellaneous
New in: 1996
Price: request quote
Location: Weißwasser
Seller: Telux Immobilien GmbH

Technical data see pictures 12 fields, up to 600 degrees Stainless steel band ca. 120 cm Furnace length approx 18 STS Furnace input ca 120 cm wide, 50 cm high If you have questions, they reach Mr. Ludwig see Phone: 0172-7966561.

Category: 702: breadmaking and confectionery machines
New in: 1985
Price: request quote
Location: Land-DE Germany, 64832 Babenhausen
Seller: bak-tec-Industries GmbH

2 x W.P. net belt tunnel oven - gas heated - working width 2500 mm - baking area 52,5 qm. - external dimension: LxWxH: 24300 x 3500 x 2800 mm - V2A cleading - baking ceiling height, 155 mm - with steam function - steam output external - max. baking temperature 280 degree - Video Filme by request

Category: 1200: machines and plants for process engineering
New in: 1976
Price: 100.000 €
Location: Land-pl PL
Seller: NETBID Polska Sp. z o.o.

Year of manufacturing 1976 Modernization 2006 Manufacturer EKO-mik Systems, Gliwice (EMIT) Number of electrodes 3 Electrode diameter 300mm Electrode clamping jaws Steel / Cu - water-cooled Electrode clamping device compressed air Electrode adjustment lowering with cable winch Electrode control pneumatic Ca, Mg and Al alloy additives are dispensed as wire with 3 wire feeders Transformer of furnace Year of manufacturing 1976 Manufacturer EKO-mik Systems, Gliwice (EMIT) Transformer capacity 9 MVA Cooling system oil circuit water cooler Tap switch Rheinhausen Power cables 3 pcs., water-cooled

Category: 1200: machines and plants for process engineering
New in: 1976
Price: 215.000 €
Location: Land-pl PL
Seller: NETBID Polska Sp. z o.o.

Batch weight 25 to Melting time tap to tap 80 - 90 min. Graphite electrodes 3 Diameter of electrodes 350 mm Electrode clamps St/Cu water-cooled Furnace hydraulic systems Furnace tilting cylinder Electrode lifting cylinder Year of manufacturing 2006 Pumps axial piston pumps Valves proportional servo valves Lance manipulator Manufacturer Huta Ostrowice Year of manufacturing 2006 Alloying additives carbon and O2 with lance blowers Carbon automatic storage bin system In 2006, the following components were renewed: Furnace lid, water cooling system 1st jacket ring, water cooling system Furnace bend, water cooling system Installation of a ne ...

Category: 1300: other machines and plants
New in: 2001
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

2. Second-hand High-Temperature Superconductor Bar Drawing Line & Annealing Furnace Make: BULTMAN(Germany) Built: 2001 A. High-Temperature Superconductor Bar Drawing Machine Model: SZ 0180/01-19 DS-K Product Material: High-Temperature Superconductor Ingoing Material Bar Dia.: 14 mm ~ 63.5 mm Bar Length: 0.7 m ~ 15.8 m Finished Material Bar Dia.: 13.5 mm ~ 59.1 mm Length: 0.8 m ~ 18.25 m B. Annealing Furnace Make: ABBOTT Heat Temp.: Max. 1,010 °C C. Shear Piston Dia.: 50 mm Stroke: 100 mm

Category: 1300: other machines and plants
New in: 2001
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

1. Second-hand High-Temperature Superconductor Bar Drawing Line & Annealing Furnace Make: BULTMAN(Germany) Built: 2001 A. High-Temperature Superconductor Bar Drawing Machine Model: SZ 0370/01-58 GS-Z Product Material: High-Temperature Superconductor Bar Dia.: 17.04 mm ~ 88.9 mm Bar Length: 1.8 m ~ 45.6 m Finished Material Bar Dia.: 15.06 mm ~ 79.2 mm Length: 2.2 m ~ 54.8 m B. Annealing Furnace Make: ABBOTT Heat Temp.: Max. 1,010 °C C. Shear Piston Dia.: 50 mm Stroke: 100 mm Bending pinch rolls

Category: 1300: other machines and plants
New in: 1966
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control s ...

Category: 702: breadmaking and confectionery machines
New in: 2011
Price: request quote
Location: Bielefeld
Seller: Güzel Taceddin

consisting of a convection oven and 2 deck ovens: Convection oven B4 - E2 with exhaust hood Digital scroll control (IS control) Convection oven is 3/N/PE for 5 trays 60 x 40 cm 400V 50/60 Hz Power 9,2 kW Control Panel left Right-hinged door Deck ovens EBO 64-320 IS 600 Digital scroll controller 2 floors per 60 x 40 cm 400V / 50 HZ / output 2 x 3, 45kW (both together 6.9 kW Control Panel left Proofing Cabinet has 2, 1kW power In addition to the two furnaces is still a Proofer (left panel) integrated with features for 60 x 40 cm sheets of 10 pads Dimensions/overall Height: 210 cm Width: 95 cm Depth: 90 cm

Category: 702: breadmaking and confectionery machines
New in: 2013
Price: request quote
Location: Land-de DE Bielefeld
Seller: Güzel Taceddin

consisting of a convection oven and 2 deck ovens: with exhaust hood both floors with digital scroll control (IS control) Convection oven / convection ovens is for 6 plates 60 x 40 cm ovens is year 2013 400V 3/N/PE Power 9,2 kW IP-protection class IP X 4 Multi-deck ovens are 68-320 IS 600 type EBO 2 floors each 60 x 80 cm with steaming year 2012 400V / 50 HZ / together 10,3 kW Furnaces are on a proofing Cabinet Proofing Cabinet is for 10 sheets on castors with brake

Category: 702: breadmaking and confectionery machines
New in: 2010
Price: request quote
Location: Land-de DE Bielefeld
Seller: Güzel Taceddin

consisting of a convection oven and 2 deck ovens: Convection oven B4 - E2 with exhaust hood Digital scroll control (IS control) Convection oven is for 5 trays 60 x 40 cm year 2010 400V 3/N/PE 50/60 Hz Power 9,2 kW Control Panel left Right-hinged door Deck ovens EBO 64-320 IS 600 Digital scroll controller 2 floors per 60 x 40 cm year 2010 400V / 50 HZ / output 2 x 3, 45kW (both together 6.9 kW Control Panel left Proofing Cabinet has 2, 1kW power In addition to the two furnaces is still a Proofer (left panel) integrated with features for 60 x 40 cm sheets of 10 pads Dimensions/overall Height: 210 cm Width: 95 cm Depth: 90 cm

Category: 702: breadmaking and confectionery machines
New in: 2010
Price: request quote
Location: Land-de DE Bielefeld
Seller: Güzel Taceddin

consisting of a convection oven and 2 deck ovens: Convection oven B4 - E2 with exhaust hood Digital scroll control (IS control) Convection oven is for 5 trays 60 x 40 cm year 2010 400V 3/N/PE 50/60 Hz Power 9,2 kW Control Panel left Right-hinged door Deck ovens EBO 64-320 IS 600 Digital scroll controller 2 floors per 60 x 40 cm year 2010 400V / 50 HZ / output 2 x 3, 45kW (both together 6.9 kW Control Panel left Proofing Cabinet has 2, 1kW power In addition to the two furnaces is still a Proofer (left panel) integrated with features for 60 x 40 cm sheets of 10 pads Dimensions/overall Height: 210 cm Width: 95 cm Depth: 90 cm

Category: 702: breadmaking and confectionery machines
New in: 2008
Price: request quote
Location: Land-de DE Bielefeld
Seller: Güzel Taceddin

Built in 2008 3 floors / each floor 60 x 80 cm Back space per stove 0, 48 sqm total 1, 44 sqm approx. all floors can be controlled separately each floor with stone hearth with cooking machine Cabinet digital control with hood, including raking shredder for the baking of almost all products suitable Nominal consumption 19kW 400/230 V 3/N/PE Furnace can be steered with brake on 4 wheels 2 Each floor is back plate with stone Each floor with separate steam box incl. heaters The Proofer is for 8 plates 60x80cm or 16 trays 60x40cm Folding the floors are made of special safety glass Dimensions: Height: 210cm Width: 90cm Depth: 130cm (oven is 120cm plus 10cm box plus hood) Flo ...

Category: 702: breadmaking and confectionery machines
New in: 2012
Price: request quote
Location: Land-de DE Bielefeld
Seller: Güzel Taceddin

with hood, including raking shredder with proofing Cabinet 2 floors are controlled separately A floor for cross 2 trays of 60 x 40 cm or 1 sheet 60 x 80 cm Edelstahlverkeidung proofing Cabinet 230V / 50/60 Hz furnaces 400V / 50 Hz, 22.5 kW

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-DE Germany, 99334 Kirchheim
Seller: In.Ha.TEC Vertrieb & Service UG

Hearth furnace W & P, type: Matador MDC 101-gebraucht or obsolete - - year of production 1994-5 flock (1.2 x 1.6 m) - baking surface: 10 m² -Either with gas or oil burner - control manually, we have many different stoves. Please ask us. A visit can be made love to by arrangement.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-de DE 76877 Offenbach / Queich
Seller: Minox Maschinenhandels GmbH

Working temperature: maximum 700 ° C Type of heating: Electric heating elements (heating elements) Refrigeration power: 30 KW Operating voltage: 400 V, 50 Hz Control voltage: 230 V, 50 Hz Temperature control: fully automatic in 1 control zone of thermocouple and thermostat; On off control. Furnace internal dimensions: Width: 600 mm Depth: approx. 1000 mm Height: approx. 900 mm; Width of the door opening: approx. 700 mm; Circulating fan: Capacity: approx. 0.95 m m³ / S Connection value: 2,2 KW.

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Nominal temperature: 250°C, working temperature: 50-250°C, usable space: 1.2m³, steam chamber: 3m³, isolator: 200mm, material: Stainless steel 1.4301, outlet side ventilator: 140mm, heating output: 50kW max., air volume: 6000m³/h at 500Pa, motor power: 1.5kW, operational voltage: 3x400V, control voltage: 24V, connected load: 52 kW, chamber dimensions: 1000x700x1700mm, length: 1400mm, width: 2060mm, height: 2900mm.

Category: 109: other metal working machines
New in: 2007
Price: request quote
Location: Land-de DE
Seller: Asset-Trade - Bewertung & Vermarktung

Used URPE CFA 330 tons of die casting machine Clamping force 330 tons Year of construction: 2007 Dimensions: 6000 mm x 2000 mm x 3200 Weight: 15,000 kg Equipment: Control box: 1500 mm x 800 mm x 1700 mm Platform: 2000 mm x 1500 mm x 300 mm Furnace: diameter: 1500mm / height 1500 mm, weight: 3000 Technical Data: closing force 3300 kN closing the path: 510 mm the force of the ejector 181 kN ejector stroke: 120 mm height of the mold (min-max): 300/700 mm panel dimensions: 910 x 910 mm distance between columns 572 x 572 mm diameter of the column: 115 mm the position of injection: 0-80-160 mm maximum casting: 155-350 kN injection piston diameter: 50-60-70-80 mm f ...

Category: 109: other metal working machines
New in: used
Price: 950 €
Location: D - Nordrhein-Westfalen
Seller: Frank Sprengel Metallbearbeitungsmaschinen

Category: 109: other metal working machines
New in: used
Price: 1.950 €
Location: D - Nordrhein-Westfalen
Seller: Frank Sprengel Metallbearbeitungsmaschinen

Category: 209: other wood working machines
New in: new
Price: request quote
Location: D - Bayern
Seller: Graf Maschinenhandel GmbH

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-de DE Köln
Seller: Heim Bäckereitechnik

Used Thermo-oil rack oven HEUFT Thermo-roll VTR 08.12,5.10 10qm baking surface Sale from location bakery. Furnace goes out completely.

Category: 702: breadmaking and confectionery machines
New in: used
Price: request quote
Location: Land-de DE Köln
Seller: Heim Bäckereitechnik

Used Thermo-oil deck oven Fabr. HEUFT VO 216.42 12qm baking surface 6 herd per B 120 X 160cm Sale from location bakery. Furnace goes out completely.

Category: 109: other metal working machines
New in: 1994
Price: request quote
Location: Land-de DE Baden-Württemberg
Seller: W&T EFRA

Industrial furnace Ernst Reinhardt TV 3 Built in 1994 Fully functional.

Category: 1200: machines and plants for process engineering
New in: 1997
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand billet casting plant including melt shop with a lot of accessories. Capacity of the steel melting shop of 80 ton liquid steel in ladle (600.000 tpy). Billet size: 125 / 140 / 150 mm Billet length: 4-9 meters Manufacturer: Taglaferri, BSE, Danieli, STS Senini, CONCAST Scope of supply: EAF Chemical Package Ladle Furnace Continuous Billet Caster Rotating Turret Tundish Car Cutting System Dust Treatment Plant Scrap Cars Water Plant Cranes – melting shop Workshop

Category: 1200: machines and plants for process engineering
New in: 1998
Price: request quote
Location: Land-de DE
Seller: MET-TECH GMBH

Qty. 1 Second-hand stainless steel melt shop plant including slab and strip casting lines Mfc.: Demag, BSE, SMS, SIEMENS, M&W Built: 1998, 1999, 2001 Revamped: 2009 Slab Dimensions: 800-1.600 x 175, 210, 240 mm Max. Length 12.000 mm External hot rolling process! Dim.: 800-1600 x 4 – 6 mm thickness Strip Caster - dimensions: Width 1.130 + 1.450 x thickness 2.4 – 6.0 mm Rolling mill - after rolling process: 1.130 – 1.450 x 1.5 -2.5 mm Capacity: 20 melts/day - 600,000 T/annum Consist of: Scrap storage device UHP Electric Arc Furnace AOD Converter System Secondary Metallurgy Continuous Slab Casting Plant Miscellaneous Strip Casting Plant 4-Hi Rolling Mill Flying Shear  ...

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Land-de DE Dortmund
Seller: VEI-Engineering GmbH

Electrically heated air circulation chamber furnace (horizontal airflow) maximum temperature: 650?C useable dimensions (W x H x D): 1000 x 1000 x 2000 mm heating power: 72 kW circulation fan: 1 x 4 kW

Category: 702: breadmaking and confectionery machines
New in: used
Price: 8.000 €
Location: Land-de DE Saarbrücken
Seller: Heim Bäckereitechnik

Used Thermo-oil plant Fabr. HEUFT consisting of: Thermo-oil deck oven HEUFT VO 220.33 15qm baking surface 6 herd per B 120 x 200cm 3 extract herd Oven switching off Boiler plant KO 100 Expansion tank, drain tank Sale from location bakery. Furnace can be installed completely. Oil is already drained.

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: Land-de DE
Seller: Mirrotech Glas & Spiegel GmbH

more data coming soon

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)