fo 6 used for sale

THICKNESS: 0.014 - 0.030 mm, DOUBLED FOIL THICKNESS: 0.028-0.060 MM;

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

continuous grilling line grilling surface (w x l) : 600 x 7.500 mm bottom contact grilling + hot air (with flip-over) grilling time : 1 minute to 60 minutes belt width ± 600 mm electrically heated power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system adjustable speed overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg

Linear cooler for donats/pastries/cakes etc. Linear cooler, consisting of the following components: - Conveyor belt with drive - Insulating housing - Evaporators and others - Refrigeration technology - Control cabinet Geometric specifications External dimensions Length: approx. 7,800 mm Width: approx. 1,800 mm plus control cabinet Height: approx. 2,400 mm plus valve station Inlet height: approx. 880 mm Spout height: approx. 1,030 mm Technical performance data using the following example: Nougat Donut (Master) Product weight: approx. 80 g Product size (Ø x H) approx. 100 x 35 mm Processing capacity: 320 kg/h = 4,000 pcs/h Throughput time: approx. 3.5 min, adjustable Power connection: 400 V, 3 Ph, 50 Hz Total power requirement: 30 kW Radiator dimensions (LxWxH): 7,800 x 1,800 x 2,400 mm Condition: well-maintained, fully functional Availability: immed ...

Faceplate, faceplate chuck, four-jaw chuck -without: screw-on jaws Manufacturer: Forkardt -Mouth size: Ø 610 mm -Cone holder short cone: 8 (139 mm) -Weight: 121 kg

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 5 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.28 kg

Stick electrodes 5.0 x 450 -Type: FOX DUR 600 -Price: per package -Number: 2 packages available -Weight per package: 6.2 kg

CNC drawbar, tool holder, tool holder, milling tool holder - Quantity: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 - Price: complete -Weight: 6.8 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 8 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.6 kg

Dough laminator Dimensions: 3480x1110x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 610x2800mm Distance with adjustable roller: 1-40 mm Weight: 260kg

Tubular dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry Dimensions: 350x550x800mm Electric power: 0.6kW Portion weight: 30-600 grams Machine weight: 65 kg

Key data: 6000 mm, 2000 mm

Ref.Nr. 00846 Name of the system: Used waterjet machine Spare parts system Manufacturer Flow Model Foracon WS3-20/602KS Built in 1995 Sheet size 2000mm x 6000mm Achievement 9Kw ( Engine ) 2 pumps (flow) 2 cutting heads Operating hours pump 1 = 19700 h Operating hours pump 2 = 24751 h Incl. sand tower Incl. sludge removal system Renewal of the control system 2016 ( Engelmann company ) Condition of the system was disconnected a week ago Is still under power but cannot be demonstrated because the cables have been cut during disconnection Customer has used the system until the end Submission date Immediately

Edge banding machine Type: Tempora F 600 Manufacturer: Format-4 Year: 2021 Glued meters: 9000 In very good condition, under power Find more here - / Contact us at -

CNC controlled cutting table for flat glass sheets 6000 x 3210 mm. With topiary and model catalogue. The glass panels are placed on top by means of swivelling arms. Power consumption 20 kW, dimensions 9200 x 4500 mm

Model: 6219 - Type: Ridenocciolatrice - Year 2010 - 380 volts - Made in Italy - The Peach Repitter model 6219 feeds, aligns and repits the half-peaches containing whole pits or pit fragments, with a speed of up to 320 half-peaches per minute - The machine guarantees a high alignment efficiency and gentle product handling during the whole process - Reduction of the manpower. Thanks to the automatic alignment system and to the knives repitting device the half-peaches require a minimum working time - Superior quality level. The system assures a high alignment efficiency, guaranteeing a gentle product management during the whole working cycle - Low cost maintenance/Minimum downtime. Due to the simplicity of the design of this multiple lane knife pitter, high mechanical reliability is achieved, guaranteeing an extremely easy intervention - Electric engine 1,5 Kw  ...

max. counting speed sheets: 2000 /min max. paper size: 50 x 70 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Forklift forks, forks, forklift tines with anti-slip coatingLoad capacity: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carriage height: 405 mm - suitable for tine holder: FEM 2 Form B rubber coating as anti-slip coating and for protecting transport goods? Rocker arm lockWeight: 145 kgas good as new, unusedFor a 2.5 ton. Forklift.; used

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, Conveyor belt type E 12/2 EO/E3 MT-TT TRANSPARENT -Width: 600 mm -Length: 2400 mm -Quantity: 1 conveyor belt available -Dimensions: 600/230/H180 mm -Weight: 2.8 kg

Technical data: Make: Moehringer Length: 1900 mm Width: 60 mm - Good condition - Used to transport parquet friezes - Tipping stool and adjustable stem holder Pictures and further information on request

1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM

Antriebswalze 1 Stück / roller 1 piece Eurofold / Foldmaster Manufacturer Number: 235.100.321 Drive roller We offer different versions of rollers for Eurofold 235 / 435 / Foldmaster 200 folding machines Preis ist für eine Walze / Price is for one roller Art.: PS2811 depending on the one we have in the warehouse at the moment. They can be rollers with rubber rings or fully rubberized rollers. Fully rubberized rollers provide good adhesion to the paper and thus better paper transport. After your inquiry we will give you further information. Possible spare part number: 235.100.321 - Drive roller 235.000.889 235.000.888 435.100.001 235.000.887 For FoldMaster, ET numbers: 235.000.523 235.000.524 235.000.522 435.000.109

calender for PCV foil

Folding machine 360 Touch screen Electronic variable speed drive Flat pile feeder, with head suction Compressor Rotary Suction Double Sheet System Antisound covers Stream delivery Machine specially designed for the folding of brochures, allows a minimum fold of 20 mm Spiral rollers (to avoid wrinkles) similar to MBO Module to launch the narrow folds to the 2nd unit (if machine has 2nd unit) Vertical delivery stacker for optional microfolding Technical specifications Max. Format: 360 X 850 mm Min. Format: 85 X 100 mm Min. Folding: 20 mm Max. Speed: 180 m/min Paper thickness: 40-250 grms Weight: 1500 kg Can be configured from 4 to 12 buckles in a single unit (Also available model 470)

1st unit : M7/46 – 2 buckles 2nd unit : M7/46 – 2 buckles SBAP 46-ME-52 delivery

high-quality front foils for industrial use for IPC10.8 104168006 and IPC10.7 104168010

ILPRA FOODPACK ID.NO. 2114 Ilpra Foodpack tray sealer with 4x associated tools year of year 2009. Tool no. 1. Semi-gastro 325 x 265 mm. No. 2. 220 x 175 mm. No. 3. 165 x 120 mm No. 4. Oval approx. 100 x 75 mm. Dimensions machine 500 x 85 cm H 160 cm

Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow -Working width: max. 1700 mm -Plow height: 820 mm -with: Spring-loaded flap drive-over system -Plow: mechanically adjustable -for: attachment to forklifts or similar -Transport dimensions: 2195/900/H1100 mm -Weight: 350 kg

Horizon AFC 746 D - cross folder 16 pages year 2019 Counter 73 million good condition in production available immediately

MF-25 Corner Forming Machine

Komatsu Forwarder 845 motor A G C O power 49 AWF - only 2000 hours engine contaminated ( presumably a wrong liquid was poured in when the machine was out in the forest ) Price from Leende - Ned. € 3.000,=

FOAMplus EZ100 foam packaging system was built in 2014 in Germany by Storopack Deutschland GmbH + Co.KG. The machine is designed for the production of lightweight and durable protective packaging that effectively protect products during transport. These elements are produced directly at the packaging station by using polyurethane foam. STOROPACK FOAMplus produces the foam by mixing two chemical components. The chemical components A” and B” are taken from the barrels by means of two electric pumps and further transported by flexible hoses to the dispenser. After application, the material increases in volume by up to 250 times, precisely adapting to the shape of the product to be protected. The operation of the machine is managed by a microprocessor control system with an easy-to-read LCD display, which is responsible for controlling the most important parameters and ensuring safe oper ...

Folding Machine Nail Foldnak 8 Art.Nr. L981

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.

New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm

Manufacturer: Bat Forum, Year: 2008, Foil stations: yes, Shrinking tunnel mm: 1400, Total connection value in kW: 4, Working width mm: 800, Year :2008

2014 Conical dewatering press S15-E-EVA-7,5 food grade model. Completely revised. History and documentation available. Elektromotor capacity: 7,5kW.

Hakro hot foil installation on K offset cilinder from 1960. Electronically upgraded for higher production quality. More details on request.

Size: 520 mm Equipments: 4 Folding units for Heidelberg Stahlfolder TI 52 1st Unit 1x 1.ST Nr. 1 gate fold 1x 1.ST Nr. 2 gate fold 1x 1.ST Nr. 3 gate fold 1x 1.ST Nr. 4 gate fold

Pile feeder - separating head 2 buckles 1 knife Noise hood Batch counter LCD touch-screen control Belt delivery Sheet size : 490x650 mm - min. 120x172 mm (only Parallel fold) - min. 105x172 mm (with special equipment) - min. 174x174 mm (with cross fold) Fold length: min. 58 mm Paper weight : 40-250g/sqm Pile height : 590 mm Speed : 180 m/min

A machine for the production of foam pads according to demand and product for the packaging industry is available. Packaging capacity: 23 bags/min, film width range: 470mm-600mm, container volume range: 60l-1000l, foam type: polyurethane foam, machine dimensions X/Y/Z: approx. 1500mm/2000mm/750mm, weight: approx. 350kg. Documentation available. On-site inspection is possible.

Folienschneider / Foil Cutter BAIER FOLSCH Baujahr / Year 1966 - Serial-No. 66236