feeder circular used for sale

Vibration feeder #4868 Manufacturer: EAR Type: VF 500 L Plate diameter: 770 mm Adjustable vibration

IEMCA model 33 lathe bar loader

Enveloper feeder Schneider SF 80; Shed investors; good condition; cleaned and tested; format max.360x360mm, min.100x100mm; Max. Speed. 15000/hr; Height adjustable; optional with delivery belt A20. Envelope feeder Schneider SF 80; good condition; cleaned and checked; size max. 360x360mm, min.100x100mm; max.speed 15000/h; adjustable hight; for option with delivery belt A20.

Volumetric feeder,stainless steel,hanging in stainless rack,0,75 kW gearmotor 62 rpm.

Capsule feeder,stainless steel,elevator with out sorting and capsule magazine.

Capsule feeder,stainless steel,elevator with out sorting and capsule magazine.

Volumetric feeder,stainless steel,Seval - 2013,Ø 23 mm screw,variable speed.

Belt feeder Engel, model FB100 2500LX850GB STD, SN: 2206369. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (pa ...

turning diameter: 60 mm turning length: 200 mm number of slides: total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 35 - max. 65 mm Guide channels: 6 control: SPS max. bar length: 3.200 mm bar material dia.: min. 35 mm bar material dia.: max. 65 mm total power requirement: 2 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 4,0 x 1,1 x 1,6 m Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0 mm plate thickness: 0 mm plate length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KR (control unit right), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.

1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KL (control unit left), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.

Product name: Feeder VSA 2048L Manufacturer: Holzkraft Item number: 5119048 Condition: Brand new Technical details: • max. projection: 1050 mm • Number of PU feed rollers: 4 • Roll diameter: 120 mm • Roll width: 60 mm • Wheel travel: 20 mm • 2-speed transmission • 8 x speeds: 2/4/5.5/6.5/11/13/16.5/33 m/min • Motor power 50 HZ: 0.75 kW • Voltage: 400 V • Weight: 73.5 kg (incl. tripod) • Right-left rotation • Individual adjustment options in vertical and horizontal position for optimal feed •Metal casing • without counter for height adjustment • Dimensions (L x W x H): 1,665 x 220 x 540 mm Price: €1,090.00 (EUR) plus VAT ex Grunow (Brandenburg) Of course, shipping is possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!)  ...

MACHINE 2012 MODEL IN WORKING CONDITION, JUST CHANGE MATERIAL, SOMETIMES HANGING AT PART CHANGE, IT IS IN EXCELLENT CONDITION WITH A LITTLE MAINTENANCE. FOR LATHES

OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection

UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller

Bar feeder Mupem CA5/36H Year 1998 Max diameter 36mm

LNS SUPER HYDROBAR BARFEEDER FOR SALE ! VERY GOOD CONDITION - LIKE A NEW ONE WITH A BRAND NEW HYDRAULIC SYSTEM

SYMCO KH-226 Bar Feeder MAX DIAMETER 20 MM MAGAZINE ROD LENGTH 2MT SINGLE ROD 3MT STEP MOTOR CHAIN ​​DRIVE THROW PUSH TORQUE ADJUSTABLE FULL AUTOMATIC NO MORE ROD THROW ALARM SUPPLEMENTARY FROM WORKSHOP LITTLE USE IN NEW SETTING IN WORKING CONDITION

Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller

automatic loader year 2003, max diameter ø 60/65 mm, bar L = 3000 mm, available and visible

UNUSED - Size: 980 x 2.200 mm - Unbalance Motors: 2 Pcs. Friedrich FT 95-4-2.2 (1.750 RPM / 0,6 kW) - Stainless steel through - Included: Frame and Rubber springs

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 6 mm up to: 80 mm Length of bars min.: 130 mm Length of bars max.: 1500 mm Bar weight max.: 67 kg Loading time: 4 - 12 sec Feed range max.: 100 m/min Push force max.: 167 Nm Voltage 50 Hz 3x: 380 Volt Compressed air from: 5 bar Machine´s weight about: 600 kg Overall dimensions machine: Length: 2050 mm Width: 1800 mm Height: 1700 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 3 mm up to: 32 mm

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consists of: - mobile round pile feeder RFU-54 Horizon RFU-54 Round pile feeder - Installation: quick to set up, without any special skills -Format: max. 540x1000mm; min. 100x148mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm - Output: max. 45,000 cycles/h - Compatible with: Horizon AFC-544AKT, Horizon AFC-546AKT Horizon AFC-564AKT, Horizon AFC-566AKT Horizon AFC-566F, Horizon AFC-566FKT - Weight: 518kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 2 mm up to: 28 mm Length of bars max.: 4000 mm Execution: Barrel Oil feeded / flushed Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 400 kg Overall dimensions machine: Length: 4800 mm Width: 985 mm Height: 1500 mm

Volumetric feeder,stainless steel,Seval - 2013,Ø 23 mm screw,variable speed.

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 5 mm up to: 42 mm Length of bars max.: 3200 mm Outstanding length min.: 530 mm Feed range: 0 - 400 mm/s Max. Feed force: 550 N Voltage 50 Hz 3x: 400 Volt Power: 1.5 kW Compressed air from: 6 bar Overall dimensions machine: Length: 4700 mm Width: 915 mm Height: 1200 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 1 mm up to: 12.7 mm Length of bars max.: 3200 mm Outstanding length min.: 70 mm Execution: Barrel Voltage 50 Hz 3x: 440 Volt Overall dimensions machine: Length: 5000 mm Width: 400 mm Height: 1200 mm Various accessories:

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 3 mm up to: 36 mm Length of bars max.: 3200 mm Overall dimensions machine: Length: 4000 mm Width: 500 mm Height: 1500 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 2 mm up to: 12.7 mm Length of bars max.: 4000 mm Overall dimensions machine: Length: 4500 mm Width: 1160 mm Height: 1200 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up up to: 32 mm Length of bars max.: 3000 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 900 kg Overall dimensions machine: Length: 4000 mm Width: 800 mm Height: 1700 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 3 mm up to: 32 mm Length of bars max.: 3000 mm Overall dimensions machine: Length: 500 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 6 mm up to: 32 mm Execution: Barrel Oil feeded / flushed Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 400 kg

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 5 mm up to: 65 mm hexagon up: 5 mm up to: 56 mm Length of bars max.: 3750 mm Execution: Horizontal Voltage 50 Hz 3x: 200 Volt Power: 2 kW Machine´s weight about: 1450 kg Overall dimensions machine: Length: 5840 mm Width: 732 mm Height: 950-1100 mm

Roles: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod selectable: Supplied without tripod / optionally the following tripods are selectable: Standard / 1050 / PLUS with counter; Motor power: 0.75kW;

Technical data Bar diameter round up: 3 mm up to: 20 mm possible with equipement Length of bars max.: 3270 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 5270 mm Width: 1000 mm Height: 1300 mm

Friction feeder brand ANKUCH model ASB. This feeder is synchronized with the speed of the machine conveyor Energy: 430v/tri plus pneumatic supply at 6 bars Machine speed: max. 240 products/min Use format: product length  maxi 200 mins / min 35 mins product width maxi 110 mins Parts recently changed: welding jaw resistors, electric rotating joint, temperature regulator, power contactor for the heating resistors. Stock of new parts: Electric rotating joint Stock of spare parts: numerous used parts plus a complete feeder little used Number of shapers (format change) =>10 shapers Machine year: 1997 Last intervention by the manufacturer on the machine: Oct 2012 Machine equipped with option: an automatic friction feeder. (Automatic distribution of cards) Documentation: user manuals and spare parts for the friction feeder and for the aucotronic plus mechanical and electrical  ...

Used Top Loader for 3000 Monoplane Bars Used machine visible in Italy, sold as it is

Capacity: For bars from 5 to 42mm Maximum length: 4400mm Hexagonal bar diameter: 4.4mm - 36mm Storage capacity: 28 bars of 10mm diameter Advance speed: 750mm/sec. Return speed: 800mm/sec.

LNS bar feeder in good condition, electrical system manuals, easy to use, compatible with any lathe. The price is for one unit.

Used Iemca ts 560 p Bar feeder Visible in Italy sold as it is

Due to non-use, like new condition. Length max bars 3000 mm Ø max bars 50 mm Multiple spindle Automatic loader Price negotiable

Technical data Bar diameter round up: 3 mm up to: 25 mm Length of bars max.: 3200 mm Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 4000 mm Width: 600 mm Height: 1600 mm

LNS Quik Load Servo Loader Ready for collection. Model LNS Quik Load Servo Year 2003 Condition Used

LNS Quik Load Servo 3 loader Ready for collection Year 2004 Condition Used