feeder circular used for sale

Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin.

Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland

M. No.: 409091063 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overl ...

M. No.: 402111082 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overl ...

Size: 240 x 350 mm Equipments: length 115 cm power consumption 230 V, 50 Hz Height: Variable from 90 - 116 cm max. pass-trought width 24 cm width 50 cm Compatible with all 36 x 52 printing machines, regardless of the feeder system (stream feeder / single sheet feeder) Short set-up time, efficient use from 1000 envelopes serial no 20391212

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

Manufacturer: K-Tron Model: LWF D5-S + K2M - T20 Type : Twin screw feeder / double screw dosing unit Dosing : volumetric gravimetric Filler mounted on weighing platform Product : powders / granules Motor : 0,45 KW - 2000 rpm Speed reduction : Min: 16,1:1 -> 124 rpm Max: 3.22:1 -> 621 rpm Hopper volume: 50 L Hopper mixing: plow + blade 4 oil dampers Capacity: 275 L / h depending on product. Does not include electrical or safety controls. These elements can be quoted separately.

Inlet size: 150x600 mm

Material feeder (similar to bar feeder), pick-and-place machine, parts elevator for blanks to automatic lathes, machining and milling machines; -230/400 V; -Overall dimensions: approx. 1300 x 1400 x 3400 mm; -Weight: 200 kg.

RNA cap feeder / rotation feeder, type: SRC-N 630-1 L, serial number: 02657, 200 V, 1 Ph, 50 Hz, 5.04 A, inside dimensions: Ø 750 mm x 150 mm, clearance caps: 65 mm x 54 mm, total dimensions: 1050 mm x 1050 mm x 1950 mm.

Circular feeder,stainless steel,in noise cancelling cabinet,Ø 580 mm.

Motor power: 5.5kW, accessories/documentation are partially available, has been regularly serviced, on-site inspection is possible.

MEP Tiger-350-SX Metal Circular Saw Cold Circular Saw Semi-Automatic; -Manufacturer: MEP; -Type: Tiger 350 SX; -Year of construction: 1990; -Saw blade: 350 x 32 x 2.5 mm; -Round sawing range at 90°: 115 mm; -Flat: 180 x 95 mm; -Speeds: 15/30/45/90 rpm;

Mitre Cold Circular Saw EISELE Type VMS 300 Masch. No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing range at 90 (round) 100 mm sawing range at 90 (flat) 120 x 80 mm sawing range at 45 (round) 90 mm sawing range at 45 (flat) 80 x 80 mm saw blade diameter 300 mm Saw blade speed 40 / 80 rpm. 2 stages mitre cut +45 to 90 to -30 motor power 1 and 1.2 kW mains connection 400 volts, 50 Hz - coolant device - mounted saw blade approx. 270 mm Space requirement L x W x H 700 x 700 x 1600 mm Weight 212 kg very good condition; used

Built: 1991, inlet: 400 mm x 400 mm opening, overhauled, without drive.

Inlet: 380 mm x 480 mm, wheel with upstream slide valve, driven by cylindrical gear drive with 3 kW / 42 RPM, only few funning hours.

480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately

1 of second-hand but unused! Thiele rotary placer (coupon feeder). Type 400. New 1985. Maximum speed 400 coupons/minute. Min/max coupon size: 38x38 - 152x152 mm. Size adjustable. Wired for 115V/60Hz.

Jar cap inside lid feeder. This has been in use in the cosmetics industry. At the moment the lid size is 40 mm ( 5 mm )

; operational

; operational

Vibrating feeder with integrated screen segment (grizzly segment), working area 800 x 4.000 mm, E-drive by vibration motors 2 x 4 kW

Box feeder with steel scale strap and combined drive for belt and reel over pre-bed. Box dimensions: Approx. 2,000 mm x 750 mm x 500 mm high; incl. hopper (on box) with the following inlet dimensions: 1,600 mm x 1,200 mm x 360 mm high. Condition: Good substance; Motor must be overhauled, tape partially made viable.

Solid star feeders with input and output diameter 275 mm, with gear drive 0,25 kW / 35 RPM. Several identical feeders are available (built between 2000 and 2007), in very good condition, partly unused.

Steel box feeder with steel belt and combined drive unit for belt and windlass. Box dimensions: Ca. 2.000 mm x 750 mm x 500 mm high; incl. hopper on top with the following inlet dimensions: 1.600 mm x 1.200 mm x 360 mm high. Condition: Solid body; motor must be revised, part of belt needs to be greased / made flexible (due to standing time)

Entry and pull-out system for scanners; movable units; complete with drives and pneumatics; Holding role is missing; Foerderhoehe 1.550 mm; servo motor for adjustable slides infeed system for scanner of boards; sidevise moveable; incl. motors and pneumatic; hold down roller is missing; transport level 1.550 mm; servodrive for sidevise moving

Size: 1.300 x 4,900 mm, with grizzly, feed size up to 600 mm, approx. 350 t/h, E-drive 22 kW, on base frame, unused

Different gutter ca 150st with and without sieve occupy 800x400mm MVC 50-3 1100x300mm MVC 50-3 1100x400mm MVC 50-3 1100x500mm MVE 50-3 1200x400mm MVD 50-4 with and without sieve 1200x800mm MV 100/50 1200x1000mm MA 220 1200x1500mm Vem 8 1250x400mm MVD 50-3.1 Sieve 1300x1200mm MA 220 1400x650mm MVES 50-1P 1400x800mm MV 100/50 1400x1100mm MA 440 1450x900mm MVES 50-1P 1450x1200mm MVFS 50-2P 1500x400mm MVE 50-3 1500x500mm MS 7.21 Sieve 1500x650mm MVE 50-3.1 1500x800mm MVE 50 1600x400mm MVD 50-2 1600x900mm MVES 50-1P 1600x1200mm MA440 1750x400mm MVD 50-2 1800x500mm MVE 33-1 1800x1400mm MV 900-5 1850x500 MVES 50-1p sieve 1900x900mm MVF 33-1 2000x400mm MVF 50-1 2250x400mm MVE 50-3.1 3350x400mm 2x MVD 50-2 3500x2000mm 2x Schenck DF3 7400x950mm DMW 1000v 7500x500mm 2 Jost ruttler 7500x750mm DF3

Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video: abcs://youtu.be/NwSQ6DHySrU

M. No.: 91-1101

Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video abcs://youtu.be/xZFPl9-vHtg

Type V-180 Number of wheels(pcs) 1 Wheels diameter 200 mm Wheels width 40 mm Feeding rate 0,9¬21,2 (A25B40) Motor power 0,75 kW Machine frame - Cast aluminum Transport dimensions 632x332x222 mm Weight 20,1 kg Video: abcs://abc.youtube.com/watch?v=dfsFa6y4sv0&feature=youtu.be

Built in: 2004 Equipment: Feeder; working condition

Built in 1998 Size max 205 x 130 x 30 mm min 35 x 50 mm Product weight max 1-300 g/qm Speed max up to 200 c/min; working condition

Wheel diameter 120 mm Wheel width 60 mm Wheel diametre hole 35 mm

FEEDER BELT - CONVEYOR BELT GFB 600 FOR INJECTOR GÜNTHER PI 104/236 Band width: 600 mm used,overhauled Request a quote on iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Bundle/Stream feeders Built in 2001; working condition

Hydraulic step feeder to the separation of round timber. With hydraulic arms of allocation. For short logs up to 1.2 m. Including hydraulic power pack. Only 5 years in use; Very good

Bolt feeders Manufacturer: Tucker Type: BV 50D.00.44/5.18F8 and BV 50D.10.01/5(12-25) There are 2 pieces. The price is for 1 PCs.

Width: 900 mm, length: 4 m, very stable steel-apron-feeder, PIV gear drive

Working size: 1,000 x 1,500 mm, on base frame, without drive

width 30 cm age 2007 1 friction feeder max. 1.000 cycles / h (neutral running) mobile sub-frame Delivery time: immediately from stock Ref: PO200024A Please ask for price. We ship and install worldwide!