We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,621 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Length: 900mm, width: 800mm, height: 920mm, weight: 330kg.
used
Saw blade diameter: 400mm, length: 1080mm, width: 900mm, height: 1760mm, weight: 925kg.
used
Working height: approx. 925mm, cutting range: At 90°: Square: 90mm/90mm, Flat: 200mm/90mm, At 45°: Flat: 140mm/90mm. Saw blade diameter: 250mm/275mm/300mm/315mm/325mm/350mm.
used
Rotational speed: 1800/3600/min, an inspection is possible.
used
Heavy motorized circle Scissors make PARX type KSM 6 SMachine -No: 3962 Series -No: 36/79 Year 1979Shear performance up to 40 kg strength: 15 mmShear capacity up to 105 kg strength: 9.0 mmminute Diameter of the tube: 450 mmMax. Diameter of the tube: 1600 mmDischarge between the stand and knife: 625 mmCutting speed: 10 m / min.Drive power: 11 kWWeight approx: 8,2 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Compressed air supply: 6bar, motor power: 1.9kW, weight: 370kg.
used
Saw blade diameter: max. 250mm, motor speed: 2800rpm, saw shaft speed: 3800rpm, saw blade bore: 20mm. Max. Cutting height 90°/45°: 82/55mm, table size: 710 x 900mm, angle adjustment: 0° to 45°.
new
Weibert CZ300 II Format circular saw Saw blade speed 4000 RPM (option 3000 / 4000 / 5000 RPM) Diameter saw blade 315 mm Saw blade swivel 90° – 45° Cutting depth at 90° / 45° 90 mm / 60 mm Cutting width parallel stop 700 / 1000 / 1350 mm Cutting length 1600 mm (option 2500 mm) Dimensions cast iron table 985 mm x 710 mm Dimensions sliding table 355 mm x 1595 mm (option 2200 mm) Dimensions cross table 970 mm x 540 mm Length of the swivelling cross stop 1565 mm + telescope extension up to 2550 mm Weight 600 kg – 710 kg Engine power 4.4KW 400V 50HZ (option 7 kW / 9.5 HP (S6) Suction nozzle 120 and 60mm Special Price: 5900,-€ incl.19% Pre-scoring unit (option) Diameter scribbled saw blade and bore 120 mm, 20 mm Cutting depth with 120 mm diameter saw blade 3.5 mm Pre-scribbling blade rotation speed 8200 RPM Vorritzsäge motor power 0.75 kW / 1 hp (S6)
used
Saw blade diameter: approx. 300mm, control: APS Elektronic. Dimensions X/Y/Z: 800mm/1200mm/1600mm. Including 2 roller conveyors (sheet steel), dimensions X/Z: 4000mm/1000mm. Defective but not irreparable. On-site inspection is possible.
used
Shaft diameter: 145mm, sheet dimensions: 650x1.5mm, without tools.
used
Without documentation, the internal coating is worn and should be repaired.
new
Weibert JTS-600XL-T Circular table saw Cutting length: max. 1600mm Power 2.5KW 400V 50HZ Saw blade Ø: 250mm Saw blade bore Ø: 30mm Cutting height 90°/45°: max. 80/54mm Cutting width: max. 610mm Sliding slide: 1600x240mm Sliding table stroke: 1700mm Machine table: 800x350mm Table widening: 800x270mm Table extension: 415x350mm Swivel range saw blade: 90-45° Speed saw blade: 4000 rpm Suction connection Ø: 100mm Weight: 170kg G&JET-100070XLT
new
minimax sc4e Format circular saw Motor 5kw 400V 50hz Suction nozzle diameter 120mm Suction nozzle. Saw blade protection 60mm Cutting width with parallel stop 900mm cut-off width on the left 3200mm Hem length: 2310mm Saw blade inclination 90-45° cutting height 90°: 100mm cutting height 45°: 63mm Saw blade diameter: 4000 1/min Weight approx. 454kg G&STÜ-5504524 Optional: Pre-scratch and upper protective hood
used
min. grindable saw blade diameter:16 mm max. grindable saw blade diameter:315 mm chip pocket:16 mm stroke rate grinding carriage:90-135-200 min. grinding wheel diameter:160 mm grinding spindle speed:2800 u. 5200 U/min feed rate pro saw blade rotation:0,05; 0,10; 0,15; 0,20 mm 100 % before loading warranty: none one used circular saw sharpener make WMW-Königsee, type SWSK 315, year of production
new
Code: N0750 Brand: SCM Model: CLASS SI 400 EP - CE Standard Electronic-programmed circular saw with tilting blade - CE Standard Technical data Blade diameter mm 400 Cutting height mm 140 Programmed blade lifting and tilting Scoring unit Main blade motor Hp 9,5 Scoring unit motor Hp 1,7 Carriage length mm 3800 Start/stop buttons integrated in the sliding carriage Electronic position reader for parallel guide with manual movement
used
saw blade diameter:400 mm total power requirement:380 V, 1,7/2,6 kW weight of the machine ca.:850 kg dimensions of the machine ca.:1100 x 1050 x 1620 mm
used
saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m
used
used
Dimensions basic machine approx. 3000x2000x2300mm.; Length of feed roller conveyor approximately 5200mm.
used
used
used
SPECIFICATIONS: Length of the sled mm: 3000 Saw blade diameter mm: 350 Diameter chair mm: 120 Inclinable
used
Buyer is responsible for the disassembly
used
The lot is located on the 1st floor, accessible by stairs. There is no elevator. A forklift truck is available on site.
used
used
used
used
used
used
used
used
used
used
used
used
Equipped with emergency stop, with accessories angle/protractor adjustment
used
used
used
lot consisting of: Omga radial arm saw and Ferrock FM16 drill press
used
Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg
used
used
You are responsible for dismantling and transporting this lot. There are no tools available. Incl manifold
used
- pneumatic swivelling of the saw head - pneumatic workpiece clamping - incl. operating instructions in German - Year of construction 1996 Specifications - Saw blade Ø: 450 mm - Miter range: +/- 45 ° - Connection voltage: 400 V - Dimensions WxHxD: approx. 1050 x 1600 x 1300 mm - Weight: approx. 500 kg
used
Description 0043-664-2803850 Specifications: Cutting depth 85 - 165 mm Cutting depth at 45° 60-116.5 mm Cutting depth at 60° 42-82.5 mm Swivel range 0 - 60° Idle speed 1500-1800 1/min Rated power 2,800 W Weight 15.3 kg Suction connection 58mm Description: The carpentry hand saw with exceptional weight/performance ratio! This is only possible through the use of state-of-the-art magnesium die-cast alloys. Swivelling up to 60°, this makes the hand-held circular saws a universal partner. The easy-to-read scale on the rotary wheel of the cutting depth adjustment makes the work easier and saves annoying remeasurement. For optimal handling and better control, the carpentry circular saw is equipped with soft start, constant speed under load, speed reduction and overload protection. The easy-to-use stop system of the MKS and the adjustable suction nozzle make your work m ...
used
very stable automatic with protective lock and max. 275 saw blade
used
fully hydraulic circular shears , capacity 6 mm ,
used
Fully automatic circular saw with miter cut - up to 300 sawing programs - single stroke 1,000 mm, repeatable as desired - Saw blade: HSS 370 x 32 x 3 mm - Blade speed: 5 - 150 1/min - Vice opening 190 mm
used
saw blade diameter: 275 mm cutting diameter: 90 mm capacity 45 degrees: flat: 150 x 100 mm mitter cutting - all-position: 45 ° cutting speed: 16/32 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
SMA 700 Rocker saw Firewood saw Battery starter G&JAN-1055006
used
YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made