feeder circular used for sale

Hydr. Metal circular machine Technical data: -Saw flaked diameter up to 350 mm -Cut range at 90 ° -around 110 mm -four-edged 100 mm -rectangle 180 x 40 mm -or 160 x 85 mm -at 45 ° -around 110 mm -four-edged 100 mm -Walking adjustable Li + Re ever 0-90 ° -2 cutting speeds 16 + 32 m/min -Drive 400 V/1.2/1.8 kW -Feed speed of the saw blade hydr. infinitely controllable -Coolant equipment -Supplusion â roller duct 3000 mm -Rebuff â roller duct with measure 3000 mm -Space requirements approx. B 650 x H 1650 x T 900 mm -Weight approx. 750 kg

Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional

SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&STÃ?-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&STÃ?-5504215VR

UWM KALTKREISSAEGE TYPE 315 â Zaagblad 315/350 mm - Dubbel vertek - 2 Snelheden - Koeling - Beschermkap - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

OZCELIK ALU-KALTKREISSAEGE TYPE METEOR I 500 - Half-automaat - Zaagblad 500 mm - Dubbel vertek - 4 pneumatic clamps - Nevelsmeerssysteem - Roller baan 300 cm met lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Raimann ProfiRip KR 310 M My. 2004 Multi-blade rip saw with 2 adjustable saw blades Track width 340 mm Total - passage width max 950 instead of 800 mm Cutting height with / without pressure board 115/130 mm Workpiece length 450 mm min Saw blade max. diameter 380 mm Saw blade min. diameter 250 mm Saw blade bore 80 mm Saw spindle diameter 65 mm Saw spindle speed 3900 rev / min Engine 30 kW Laser - directional lights 3 pc. Operating push 6 bar Infinitely variable feed - speed 8-48 m / min. 1.5 kW Weight 3400 kgs Voltage 400V/50Hz

Weibert Z-400-EL Format circular saw Sliding table 420x3200 mm anodized, cutting length 3500 mm Motorized height adjustment and inclined position saw blade 3 Cutting speeds: 3000/4000/5000 rpm Car. Star/Triangle Switch 7KW 400V 50HZ Vorritz engine 1.3 kW 3 Cutting speeds: 3000/4000/5000 rpm Cutting height at 90° 125 mm, at 45° 90 mm Cutting width between saw blade and parallel stop 1350 mm Laying table (1420 x 650 mm) with miter stop with 2 folding stops G&RO-Z-400-EL

Fully hydraulic curved roller Shear make PARX type KRS 2Machine -No: 3728 Series 61/72, year of construction 1973Shearing power b. 40 kg / mm2 strength: 6 mmShearing power b. 70 kg / mm2 strength: 4 mmProjection between stand and knife: 1050 mmStand opening height: 300 mmmin Curve radius: 75 mmmin. Rondendiam.:290 / 180 mmMax. Rondendrm. from 4-corner sheet: 2750 mmminute Flaring rim: 450 mmMax. Beading height: 50 mmMax. Beading radius: 35 mmCutting speed stepless: 0 - 12 m / min.Power requirement: 6 hpWeight: 1.85 t (without mandrel centering)Outside dimensions: 3000 x 900 x 2000 mm(without mandrel centering)With- full hydr. drive- graduated Speed control- Const. Starting and working torque- Automatic workpiece feed- Contour cutting (cropping)- Circular section- Spiral cut- Beading- with adjustable Thorn centeringused, from operational resolution, in good conditionPrice on request.Deliv ...

Catalog number H0242 - new machine, in stock - CE certificate - max diameter of the blade 400mm - adjustable up / down wheel and 45 degree angle - cutting length 3200mm - cutting width 1350mm - Cutting height 90 ° / 45 ° - 120 / 75mm - trolley on steel bars - the diameter of the undercut 120 x 20 mm - saw blade rotation of 3000.4000.5500rpm - undercut speed of 9000rpm - 5.5 kW / 400 V motor - Subcutaneous motor 1,1 kW - digital display - electric saw setting Overall dimensions: - length 3220mm - width 3150mm - height 900 mm - weight 800kg - the table extension - widening the table - angle cutter Complete with main blade and cutting disc Net price: 20670 PLN Net price: 4921 EUR calculated according to the price of 4,20 euros (With higher fluctuations the price may change)

Catalog number R059 - new machine - CE certificate - saw diameter 400mm - cutting width of the parallel gardener in Z400, Z400 EL 1000/1350 / 1525mm - dimensions of the sliding carriage 3200mmx420mm - diameter of the saw and the scoring hole 120mm, 20mm - sliding table 420x3200 mm anodized - cutting length 3500mm - blade diameter (not included) max 400 mm, 350 mm with the scoring unit - 120 x 20 mm cutter - not included - cutting height 90 ° 125 mm, 45 ° 90 mm - 3 cutting speeds 3000/4000/5000 rev. / min. - cutting width between the saw and the parallel stop 1350 mm - transverse table (1420 x 650 mm) with transverse stop with 2 buffers - manual height adjustment and blade inclination - automatic star / delta switch - weight 850 - 1080 kg - 400 V / 7 kW (9.5 HP) motor (S6) - 1.3 kW undercutter power (S6) Net price: 29300 PLN Net price: EUR 6735 depending on th ...

Qty. 1 Second-hand hot circular saw Mfc.: TBA Built – Bj.: 1950 overhauled 1972 Saw blade dia. – Sägeblattdurchm.: 1,600 mm Saw blade feeding with hydraulic drive Sägeblattvorschub mit hydr. Antrieb Hydraulic station Hydraulikstation Dimensions of piece for cut: min./max. 70 / 185 mm square Abmessungen des zu schneidenden Materials: min./max. 70 / 185 mm

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Circular shears make PARX / KUNZ type KSM / 2 / schMachine -No: 3756 built in 1975Technical specifications:Shear capacity 40 kg / mm2 4.0 mmShear capacity 70 kg / mm2 2.5 mmProjection 380 mmGuide curve projection 750 mmgr. round square sheet metal 1000 mm gr.Ronde octagonal sheet metal 1250 mm Flare diameter max. 400 mmFlare height max. 30 mmFlaring radius max. 20 mmCutting speed 15/30 m / minDrive power 2.5 / 3.0 kWWeight approx. 2500 kgDimensions 3600 x 500 x 2200 mmWeight approx. 2500 kgWith- automated with hydr. Adjustment of the circle center point guidancefor different diameters and material tension in the center- complete electr. Facility- Inclined lower knife shaft- swiveling control panel- hydr. Infeed of the upper tool for scissors and guide arch- hydr. Guide arc swivel device- various cutting wheelsused, in good conditionPrice on request.Delivery: ex warehouse or  ...

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

Circular saw sharpening machine Vollmer Cne

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

Pendulum circular saw Irion Cutting width 350 mm Roller table 3000 mm L x W x H: 600 x 500 x 1800 mm Weight approx. 250 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Circular saw sharpening machine Vollmer CNG

Table circular saw Schelling SKR with SUVA protection with stop Bösch L x W x H: 2200 x 1800 x 1100 mm Weight approx. 750 kg Built in 1973 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Plate circular saw Finesse vertical Format 510 x 205 cm 2 seed units (1 x horizontal, 1 x vertical) L x W x H: 620 x 260 x 100 cm Weight approx. 700 kg Built in 1975 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

CNC – controlled double miter precision circular sawing machine of very high quality, designed for demanding metal construction, which requires a rational and precise cutting. Miter adjustment range infinitely variable - 90° / + 90°, cutting range 0° - 240 x H 85 mm or 125 x 125 mm or 140 mm / 45° - 150 x H 100 mm or 120 x 120 mm or 140 mm - 60° - 130 x H 80 mm or 120 x 120 mm or 130 mm, Saw band drive power 7.5 kW - saw blade speeds 13/26 - 17/34 - 52/104 - 74/148 - 105/210 m/min - saw blade diameter 425 mm, saw table height 1,000 mm, largest material feed per stroke 1,500 mm - drive by ball roller spindle CNC control with touchscreen and color graphics - software for automatic pushing and pulling the profile rod - extremely easy programming and operation - cut lists can be loaded as an Excel file, dimensions 1.2 x 2.1 m x H 1.9 m, weight 1,250 kg

We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg

PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine

PLC – controlled high-performance precision cold-circuit sawing machine with very high quality loading magazine – equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of steel and stainless steel rods – high-strength alloys – forged materials and similar materials and similar materials Saw blade dimensions 460 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 150 mm or 130 x 130 mm - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits the material loss, saw blade speeds 60 to 130 rpm, controlled unloading slide for two different unloading positions, largest bar length in the loading magazine 6,000 mm, maximum material weight in the loading magazine 3,000 kg, largest material feed per fee ...

PLC – controlled high-performance precision cold-circuit sawing machine with loading magazine and unloading magazine of very high quality - equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of rod material – tubes and hollow profiles made of steel and stainless steel Saw blade dimensions up to a maximum of 315 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 12 mm to 80 mm tubes and hollow profiles - 12 mm to 40 mm solid material - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits material loss, saw blade speeds 20 to 130 rpm - optionally available with different saw blade speeds, controlled unloading unit for four different unloading positions - largest automatically unloadable sectio ...

Saw motor for Kaltenbach saw KKS 400 Engine was newly stored and front bearing plate renewed. Has been used as a replacement in maintenance. Motor repaired thus as new.

TUGRA ALU-KALTKREISSAEGE TYPE AC-400 - Zaagblad 400 mm - Dubbel verstek - 4 pneumatic clamps - Nevelsmeerssysteem - 1 roller baan 300 cm - 1 roller baan 300 cm met lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Longitudinal saw with milling unit Schirmer Cutting length approx. 2400 mm with milling unit

Longitudinal saw Irion Cutting length approx. 3 m Stop adjustable for cutting width by handwheel Saw blade diameter 550 mm Saw with hydraulic feed Saw drives up, drives through from front to back, lowers and goes back under the table

: neu : ca. 8 Wochen ab Auftragse : Türkei : 7500 € : 154.5 € : 2 mm : 700 mm : 1,1 kW : 7,5 m/min : 1400 mm : 400 mm : 1150 mm : 360 kg : 120 / 1.000 mm : 280 mm gearbox motor with brake footpedal central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Universal cold circular saw machine from eisele brand suitable for small and large series Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown Technical data -Saw blade diameter: 450 mm -Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown -Drive: 3/3.6 kW -with: coolant device -Cutting range at 90 degrees Round: 145 mm -Cutting range at 90 degrees square: 130 mm -Cutting range at 90 degrees flat: 240 x 70 mm -Cutting range at 45 degrees Round: 145 mm -Cutting range at 45 degrees square: 125 mm -Cutting range at 45 degrees flat: 170 x 70 mm -Cutting range at 30 degrees Round: 120 mm -Cutting range at 30 degrees flat: 120 x 70 mm -Profile size: max. 320 x 30/280 x 80 mm -Dimensions:  ...

High-quality, PLC-controlled circular shears / circular, blank and flange ring shears with punching device used - refurbished PLC – Control for 120 cutting programs with 30 program sets each Projection in tailstock 1,000 mm Automatic tailstock clamping Outreach in the shear station 400 mm Shear performance 0.5 to 5 mm sheet steel 400 N/mm² 0.5 to 3 mm stainless steel sheet 650 N/mm² Largest shearable disc diameter Ø 1,400 mm for rectangular starting material Ø 1,800 mm for octagonal starting material Smallest shear diameter 150 mm Diameter Ø shear knife 100 mm Shear rate up to 35 m/min punching diameter at S = 2 mm sheet steel 400 N/mm² - Ø 25 mm at S = 3 mm sheet steel 400 N/mm² - Ø 17 mm Drive power 7 KW Weight 1.300 kg Dimensions 2.7 x 1.8 m x H 1.7 m Optionally available with a flanging device – Maximum board height 20 mm Large ...

Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg

Weibert WJ-K315 Format circular saw Format sliding table: 2550mm Engine power: 4 KW (5.5 hp), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° WJ-800100

Ordering no: RE002 TECHNICAL DATA main saw diameter 300-550mm Height of the main saw adjustment vertically for a saw 0300 0-75mm for a saw ⌀350 15-100mm for a saw ⌀400 40-125mm for a saw ⌀450 73-150mm for a saw ⌀500 90-175mm for ⌀550 saw 120-200mm The height of the main saw adjustment at an angle of 45 ° for a saw ⌀300 0-50mm for a saw ⌀350 10-70mm for a saw ⌀400 28-85mm for a saw ⌀450 50-105mm for a saw ⌀500 63-122mm for ⌀550 saw 85-140mm Saw blade tilt 0-45° / (optional) 0-46 ° Length of sawing with an auxiliary table with the strip at the back of the table for a movable table 250 = 2500mm with a strip at the back of the table for a movable table 300 = 3000mm with the strip at the back of the table for a movable table 320 = 3200mm with the strip at the back of the table for a movable table 390 = 3700mm Sawing width using a bumper on an au ...

additional pad at the trimming table for Altendorf F45 (2 pieces available)

Weibert MKS-315 MEAL Cutting of profiles, pipes, solid materials made of black and waistband metal. saw blade diameter, 315mm bore 32mm Blade speeds 53-105 rpm Quick-release vice 140mm opening Engine power 2.2 KW Reel pad Coolant device +-45° swivel Weight 220kg WJ-MKS-315 MEAL options: underframe Circular saw blade D = 55mm 45° 50 mm material full D = 180mm 45° 80 mm pipe Square 85x85 45° 70x70mm Flat 140x70 45° 80x70mm

specifications: - Saw blade diameter up to 400 mm - Cutting range at saw blade diameter 400 mm - at 90° around 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pcs Pneum. Material clamping sticks with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg

Code 96380 UMSCHREIBUNG Volautomatische Kaltkreissäge Fabrikat Kaltenbach Model KKS 400 NA Machine Nummer 1700 - 03004 Baujahr 1982 Rechtwinkeler Schnitt Rund à 90º 130 mm Viereckig à 90º 315 x 50 mm U-profiel à 90º 24 x 85 mm Sägeblatt Durchmesser..………………… 400 mm Sägeblatt in Graden verstellbar 0 – 180 º Drehzahlen 10 – 14 – 20 UpM Hauptmotor Leistung…………………… 0,9 – 1,2 – 1,8 PS Anschluss spannung……………………. 380 Volts Zubehör Lademagazin Automatische laden bis 1700 mm Maschine Maschine ist in gutem Zustand

CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...

CATALOG NUMBER RE022 TECHNICAL DATA - saw blade tilt 0-46˚ - main engine power 6kW - 3000mm cutting length on the trolley - main spindle speed 3500/4500 rpm - 30mm spindle diameter - diameter of the main shield 300-400mm - max diameter of the scoring unit 125mm - power of the scoring unit 0.75 kW - rotational speed of the podcinak 8500 rpm - spindle diameter 20mm - cutting width at the guide 1280mm - sawing width with the use of bumpers on the auxiliary table 215-3200mm - cutting height for 300mm 90 ° / 45 ° 90 / 60mm - cutting height for 350mm 90 ° / 45 ° 5-115 / 3.5-80mm - cutting height for 400mm 90 ° / 45 ° 25-140 / 15.5-95mm - diameter of the extraction nozzle 80mm, 125mm - dimensions length / width / height 3300/3460 / 1500mm - weight 750 kg ADVANTAGES - new machine - DTR + CE documentation - warranty from the manufacturer - REMA - professional - ...

Sawing unit with tripod Brand Martin Saw blade diameter maximum 300 mm Saw blade mounting diameter 30 mm Motor power 1.1 kW Weight including pallet 110 kg

Circular table,Soco,galvanized,with plastic plate,Ø 1200 mm.

Circular table,stainless steel,standing on legs,Ø 1000 mm.

ADVANTAGES The price applies to the model - 6 axes - programmable tilt and lifting of the main saw, height and left / right position of the scoring unit, longitudinal ruler, transverse ruler - 7 inch touch panel - new machine - CE certificate - warranty from the manufacturer - REMA - professional - Polish production - 6kW main engine TECHNICAL DATA - main saw diameter 300-550mm - Height of the main saw vertical adjustment - for a saw ⌀300 0-75mm - for a saw ⌀350 15-100mm - for a saw ⌀400 40-125mm - for a saw ⌀450 73-150mm - for a saw ⌀500 90-175mm - for a saw ⌀550 120-200mm - The height of the main saw adjustment at an angle of 45 ° - for a saw ⌀300 0-50mm - for a saw ⌀350 10-70mm - for a saw ⌀400 28-85mm - for a saw ⌀450 50-105mm - for a saw ⌀500 63-122mm - for a saw ⌀550 85-140mm - Saw blade tilt 0-45 ° / (optional) 0-46 ° - L ...

-Manufacturer: Ulmia, circular saw type 1612 -Motor power: 2.2 kW -Speed: 2800 rpm -Saw blade: Ø 250 mm diameter up to 280 or slightly larger probably possible -cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Table dimensions in front of the saw blade without slide 300800mm; behind the saw blade 800800mm plus additional table self-made 500mm800mm (total 1300mm 800mm) -Sliding slide 750mm400mm -Space requirement 2.1m1.45m1.55m high -Transport dimensions 1.5m1.5m1.7m with pallet -Dimensions 1000/1340/H980 mm -Weight: 337 kg

Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 50 mm cutting diameter: 180 mm turning speeds: 3000 U/min capacity 90 degrees: round: 180 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 150 x 150 mm capacity 45 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 430 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 x 50 mm cutting diameter: 170 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 170 mm capacity 45 degrees: round: 140 mm capacity 90 degrees: square: 150 mm capacity 45 degrees: square: 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 500 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 x 50 mm cutting diameter: 130 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 115 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 250 x 85 mm capacity 45 degrees: flat: 160 x 70 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 380 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts, Price: € 290.00 The data for this ad was created with ModulMWS - the software solution of  ...