We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,628 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
saw blade diameter: 315 mm cutting diameter: 85 mm stroke: mm mitter cutting - all-position: ± 45 ° turning speed range: 19 / 38 1/min power requirement: 0,75 / 1,5 kW coolant: voltage: 400 V total power requirement: 1,5 kW weight of the machine ca.: 235 kg dimensions of the machine ca.: 0,55 x 0,90 x 1,75 m - Coolant device - Machine base - without circular saw blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 175 x 175 mm : 300 x 90 mm capacity 90 degrees: round: 220 mm work height max.: 970 mm Cutting height: max. 200 mm cutting speed: 55 m/sec. Control: total power requirement: 4,1 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 2020 x 1510 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of Logo ...
new
saw blade diameter: 800 x 50 mm turning speeds: 3000 U/min : 245 x 245 mm : 380 x 100 mm capacity 90 degrees: round: 280 mm : 210 x 210 mm Capacity 45° rectangular: 265 x 100 mm : 245 mm cutting speed: 55 m/sec. work height max.: 970 mm Cutting height: max 310 mm total power requirement: 4,0 kW weight of the machine ca.: 590 kg dimensions of the machine ca.: 1500 x 820 x 1700 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad w ...
new
saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm cutting speed: 55 m/sec. work height max.: 970 mm Cutting height: 250 mm : 80 db (A) total power requirement: 5,5 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 820 1300 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the software solution of LogoTe ...
new
saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm : 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm Control: total power requirement: 1,9 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1400 x 850x 970 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm work height max.: 970 mm Cutting height: max. 250 mm cutting speed: 55 m/sec. total power requirement: 5,6 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2020 x 1610 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
new
saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm work height max.: 970 mm Cutting height: max. 250 mm cutting speed: 55 m/sec. total power requirement: 5,6 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2020 x 1610 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
new
saw blade diameter: 500 x 50 mm turning speeds: 3000 U/min : 150 x 150 mm : 250 x 75 mm capacity 90 degrees: round: 150 mm work height max.: 970 mm Cutting height: max. 150 mm feed: 700 mm Control: total power requirement: 3,0 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 2050 x 1150 x 990 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 210 x 210 mm : 350 x 110 mm capacity 90 degrees: round: 230 mm cutting speed: 55 m/sec. work height max.: 970 mm total power requirement: 4,0 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 820 x 1300 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
saw blade diameter: 450 x 30 mm turning speeds: 2800 U/min : 130 x 130 mm : 200 x 100 mm capacity 90 degrees: round: 140 mm : 120 x 120 mm Capacity 45° rectangular: 150 x 100 mm : 140 mm cutting speed: 55 m/sec. work height max.: 970 mm Cutting height: max. 148 mm total power requirement: 2,2 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1400 x 1000 x 1800 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad w ...
new
saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 100 x 100 mm : 170 x 60 mm capacity 90 degrees: round: 100 mm work height max.: 970 mm Cutting height: max. 100 mm total power requirement: 1,9 kW weight of the machine ca.: 260 kg dimensions of the machine ca.: 1400 x 850x 970 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
saw blade diameter: 500 x 50 mm turning speeds: 3000 U/min : 150 x 150 mm : 250 x 75 mm capacity 90 degrees: round: 150 mm work height max.: 970 mm Cutting height: max. 150 mm total power requirement: 3,0 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1950 x 1050 x 970 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
saw blade diameter: 350 x 32 mm turning speeds: 3000 U/min : 110 / mass. 95 mm : 175 x 75 mm capacity 90 degrees: round: 125 mm : 85 / mass. 80 mm Capacity 45° rectangular: 100 x 80 mm : 105 / mass 90 mm total power requirement: 1,5 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1200 x 1100 x 1500 mm Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically. Work pieces are clamped pneumatically. The sawing machine has an oil nebuliser for better sawing results. With adjustable sawing feed. Accessories: saw blade comes up from below hard metal saw blade sawing speed adjustable length stop air gun lubrication system including saw blade 13.15.1015 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
saw blade diameter: 500 x 32 x 4 mm turning speeds: 3580 U/min : 230 x 180 mm : 135 x 135 mm Capacity 45° rectangular: 165 x 180 mm : 115 x115 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3,0 / 4,0 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...
new
saw blade diameter: 550 x 32 x 4 mm turning speeds: 3580 U/min : 260 x 200 mm : 155 x 155 mm Capacity 45° rectangular: 180 x 200 mm : 130 x 130 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3 / 4 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting al ...
new
saw blade diameter: 350x 32 mm turning speeds: 3000 U/min : 115 x 115 mm : 160 x 90 mm capacity 90 degrees: round: 125 mm : 110 x 110 mm Capacity 45° rectangular: 75 x 45 mm : 120 mm Cutting height: 125 mm total power requirement: 1,5 kW weight of the machine ca.: 68 kg dimensions of the machine ca.: 780 x 480 x 850 mm Description: The TL-302-SA is a manual table saw (pneumatic span) with easy safe operation! With this machine, double miter cuts on the right and left are possible up to 45 °. The miter adjustment is done here by turning the stop jaw. The TL-302-SA has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched over two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimal lubrication system and a fixed protection against the cutting area. The data for this ad was ...
new
saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 175 x 175 mm : 300 x 90 mm capacity 90 degrees: round: 220 mm work height max.: 970 mm Cutting height: max. 220 mm total power requirement: 4,1 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 2020 x 1510 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0 Technical data Rotary table Execution: Horizontal Clamping surface: Diameter: 300 mm Table height: 149 mm Table load max.: 80 kg Number of T-channels: 8 T-channel width: 10 mm Machine´s weight about: 80.0 kg Dimensions: Length: 510 mm Width: 446 mm Height: 149 mm Various accessories: Chucking clamp Splash guard
used
Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0 Technical data Rotary table Execution: Vertical Clamping surface: Diameter: 300 mm Number of T-channels: 5 T-channel width: 12 mm Dimensions: Length: 700 mm Width: 600 mm Height: 300 mm Various accessories: Tailstock Centre height: 250 mm
used
Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0 Technical data Rotary table Execution: Horizontal Clamping surface: Diameter: 500 mm Table load max.: 100 kg Number of T-channels: 6 T-channel width: 14H7 mm Dimensions: Length: 900 mm Width: 800 mm Height: 150 mm
used
Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0 Technical data Rotary table Execution: Universal Clamping surface: Diameter: 250 mm Table height: 100 mm Number of T-channels: 6 T-channel width: 12H7 mm Machine´s weight about: 44 kg Dimensions: Length: 420 mm Width: 340 mm Height: 100 mm
used
Pendulum circular saw Irion with roller conveyor Cutting height 100 mm Roller conveyor left 2m Roller conveyor right 3.5 m L x W x H: with roller conveyor 6.0 x 1.2 x 1.5 m Weight approx. 450 kg Year of construction 1965 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
used
Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.
used
Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.
new
saw blade diameter: 350 x 32 x 2,5 mm : 15/30/45/90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 1,8/2,5 kW weight: 410 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device
new
Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Size: 1.600 x 5.500 mm - Decks: 2 - Included Electrical motor and springs - Will be overhauled, sandblasted and painted
used
Size: 2.200 x 6.800 (5.750)mm - Year of Manufacture: 2002 - 2 Decks - Included: 18 kW Electrical motor, Cardan shaft and Springs.
used
Machine in excellent condition, 12 integral drops 36 LGL e-compact power supplies
used
Manufacturer Jumberca Model TLJ6 E+ Machine in good condition
used
Size: 1.800 x 4.000mm - Year of Manufacture: 1998 - With Electrical motor (11 kW/6), Cardan shaft and springs - Will be overhauled, sandblasted and painted.
used
OVERHAULED - Size: 1.400 x 3.000 mm - With Electrical motor, Cardan shaft and Spring elements.
used
Deck size: 2.000 x 5000 mm. - 2 Decks (Different deck-angle) - With electrical motors, cardan-shaft and springs - Can be sandblasted and painted.
used
Circular loom ALBI 10 gauge - type RFH11 YEAR 1989 PLATEN DIAMETER 203 MM. Number of needles 444.
used
Santoni SM-DJ2T Circular knitting machine There are 3 machines available(Price is for one machine) Machines are in good condition
used
Size: 1.400 x 2.400 mm - Included: Electrical Motor (4 kW / 1.060 RPM) and springs - Will be overhauled, sandblasted and painted.
used
OVERHAULED - Size: 1.500 x 2.000 mm - Included: Electrical motor and springs
used
Circular knitting machine in perfect working order 18 full drops. 54 IRO feeders
used
fully functional circular machine, fineness 12 18 full drops. 54 IRO feeders
used
Due to the closure of the knitting workshop, we offer knitting machines for sale. Jumberca is serviced, fully functional. Diameter: 30 Pitch: 18 Year of manufacture: 1997 Number of needles: 1728 Spin from right to left
used
Size: 1.500 x 4.500 mm - Decks: 4 - Included: Electrical motor and springs (Frame not included)
used
OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.
used
Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0 Technical data Diameter: 800 mm
used
Mayer & Cie MV 3.2 Econit Circular Knitting Machine Machine is in production
used
2 circular machines Wildm Mayer hp12 with: carder belt motor feeding step by step Electronic web protectors partially overhauled
used
2 Morat Terrot Mp2 circular machines With stepper motor power supply and Vangi Controller 2 With Recovered Sleeping Kit multiple machines 1 Model MP1 To be revised
used
1322 needles.. Full electronic.. in production... Perfect condition...
used
Table diameter: 0 mm Table height: 0 mm T-slot size: 0 mm Number of T-slots: 0 Technical data Rotary table Diameter: 800 mm