engel arburg used for sale

Manufacturer: Engel/Bosch Operating pressure: 280 bar Capacity: 65 l/min Case size: 1800 x 800 x 700 mm Voltage: 380 V Electrical power: 15 kW

Inv. Num. : 6279 Type: ES 500/90 HL-ST Producer: ENGEL Produced: 1998 Parameters: Clamping force: 900 kN Equipment: Robot system

Inv. Num. : 6582 Type: ES 330/65 Producer: ENGEL Produced: 1991 Parameters: Clamping force: 650 kN Screw diameter: 35 mm Injection capacity: 154 cm³ Height of the clamping plate: 570 mm Min. width of the clamping plate: 552 mm Distance between stands (horizontal): 405 mm Distance between stands (vertical): 345 mm Injection weight: 4000 kg

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

Ref. no.: 18092 Producer: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 25250 kg

ENGEL ES 200/75 HL-V injection moulding machine was built in Austria in 2000. The highly reliable and robust machine is designed for processing plastics by injection moulding. The high-end components installed on the ENGEL ES 200/75 HL V injection moulding machine guarantee a significant increase in work efficiency and productivity. The machine operating with a force of 75 tonnes works with injection moulds of a minimum height of 200 mm, which are placed on 660 x 560 mm platens. All process parameters are programmed and controlled on the convenient and intuitive ENGEL CNC control, located on the body of the plastics processing machine. The total weight of the machine is 4700 kg. Technical specifications of the ENGEL ES 200/75 HL-V injection moulding machine - CNC control: ENGEL - clamping force: 75 t - injection volume: 135 cm3 - injection pressure: 1065 bar - injection speed: ...

ENGEL ES 330/80 HLS injection moulding machine built in 1998 in Austria is designed for processing plastics by injection moulding. The injection moulding machine is equipped with top-quality components that increase productivity and efficiency. All parameters are conveniently programmed on the ENGEL CNC control installed on the machine body. The plastic processing machine weighs 4900 kg. Technical specifications of the ENGEL ES 330/80 HLS injection moulding machine - CNC controller: ENGEL - clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum screw speed: 400 rpm - minimum screw speed: 20 rpm - injection pressure: 1600 bar - injection speed: 113 mm/s - minimum mould height: 200 mm - maximum mould opening stroke: 450 mm - mould mounting platen dimensions (L x W): 660 x 560 mm - maximum distance between platens: 650 mm - mould mounting hole dimension (fixed plate) ...

1,0 St. gebr. Injection molding machine with robot Manufacturer: ENGEL Type: VICTORY 500/120 Power Year of construction: 2002 Clamping force: 120 tons Tie bar spacing: tie-bar-less Screw diameter: 35 mm Injection volume: 192 cm³ Control: EC100 A03 Equipment: -Robot manufacturer Engel, type: ERC43/1-E, RC-100 Tandem stroke design (smaller overall height of Robots) Travel: X - axis: 500 mm Y - axis: 800 mm Tandem stroke version 500 + 500 mm C-axis (swivel) 0 - 90° -2.0 pcs. core pulls hydraulically on BAP -Highly wear-resistant screw up to 450° C -Clamping plates vertically enlarged

1,0 St. gebr. Injection molding machine Manufacturer: ENGEL Type: VICTORY300/120TECH Year of construction: 2008 Clamping force: 120 tons Tie bar spacing: tie-bar-less Screws DN: 40 mm Moulded part weight: 180 g/ps Control: EC200 Equipment: -Interface robot Yvg0i8 -2.0 pcs. core pulls

Förderbaänder 16 A 380 V Slow runners Length 90 cm Width 15 cm Height 15 cm

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Engel granulate chute model Anguss Schneidstation 3496-904-00-00-118, SN: 228921. Good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, shar ...

Kuka robot from Engel, model KR C4. SN: 396400. In very good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.0 ...

clamping force: 800 kN injection volume: 78 cm³ screw diameter: 25 mm platen size: 570 x 552 mm Condition: used, Specification: injection moulding machine for LSR - used Nr. 13EN08 clamping unit: - clamping force: 800 kN - size of heating platen: 570 x 552 mm - Between tie bars horizontally: 405 mm - Between tie bars vertically: 345 mm - Opening stroke: 310 mm - Ejector force: 25.4 kN - Ejector stroke: 100 mm - Mould installation height max.: 530 mm - Mould installation height min.: 250 mm - Bar diameter: 60 mm - Control: CC 90-A0 Injection unit: - Injection volume max.: 78 cm³ - Injection weight max.: 90 g - Screw diameter: 25 mm - Metering stroke: 160 mm - Screw speed max.: 20 - 400 rpm - Injection flow: 87 g/sec - Injection flow (increased): 64 g/sec - Specific injection pressure: 2400 bar - Nozzle stroke:  ...

clamping force: 800 kN injection volume: 154 cm³ screw diameter: 35 mm platen size: 570 x 552 mm Condition: used, Specification: injection moulding machine for LSR - used Nr. 13EN12 clamping unit: - clamping force: 800 kN - size of heating platen: 570 x 552 mm - Between tie bars horizontally: 405 mm - Between tie bars vertically: 345 mm - Opening stroke: 310 mm - Ejector force: 25.4 kN - Ejector stroke: 100 mm - Mould installation height max.: 530 mm - Mould installation height min.: 250 mm - Bar diameter: 60 mm Injection unit: - Injection volume max.: 154 cm³ - Injection weight max.: 156 g - Screw diameter: 35 mm - Metering stroke: 160 mm - Screw speed max.: 20 - 320 rpm - Delivery flow: 35 g/sec - Injection flow: 148 g/sec - Injection flow (increased): 107 g/sec - Specific injection pressure: 1600 bar ...

Ref. no.: 18255 Hersteller: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009

Offer: Engel Insert 500V/100 LIM Bj./year 2014 approx. 8000h

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 28 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 12 mm -Protection class: IP 54 -Dimensions: 210/180/H120 mm -Weight: 4.5 kg

Conrad Engelke 3m diam. x 2.2m long Autoclave Steam operation Design pressure 7bar Design temp 169deg C Volume 19m3 Length of rotating steel tube 1320mm With new Control Panel Complete with full documentation

Key data: 5500 kN, 60 mm

Machine incl. robot !

Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994

Robot - Angel Viper 20 Year of construction: 2015 5-axis robots: axes X, Y, Z, A, B are driven by servo motors (electrically) Touch control panel The safety package for robots Robot with adapter All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Gear motor, electric motor, electric gear motor, permanent magnet motor -Manufacturer: Engel, permanent magnet motor geared motor with brake -Engine:Type:GNM31650-G2.6-B5.2 -Voltage: 24V / 50W / 3000 rpm -Gear: Type G 2.6 i= 30:1 -Shaft: Ø10 x 23 mm -Protection class: IP54 -Brake: 0.5Nm -Dimensions: 250/125/H95 mm -Weight: 2.4 kg.

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich electric forklift -Type: GNM5460E-G18 -Motor: 24V/240W -Dimensions: 150/130/H365 mm -Weight: 7 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg

VC60/50 TECH PRO (ECODRIVE) (50 ton & 18mm screw)

clamping force: 4.000 kN injection volume: 735 cm³ screw diameter: 60 mm platen size: 1.400 x 1.030 mm Condition: used, Specification: horizontal injection moulding machine, factory no: Injection unit 1: - screw diameter: 60 mm - metering stroke: 200 mm - Screw speed: 226 rpm - Injection flow: 351 cm³/sec - Injection volume: 735 cm³ - Spec. injection pressure: 1.489 bar - Spec. injection pressure increased: 2,011 bar Injection unit 2: - Screw diameter: 40 mm - Metering stroke: 140 mm - Screw speed: 400 rpm - Injection flow: 197 cm³/sec - Injection volume: 251 cm³ - Spec. injection pressure: 1.286 bar - Spec. injection pressure increased: 2.029 bar Clamping unit: - Clamping force max.: 4,000 kN - Clamping platens: 1,400 x 1030 mm - Opening stroke: 954 mm - Max. platen distance: 1,520 mm - Ejector stroke: 250 mm - Ejector forc ...

Sale of the machine and the robot, it is also possible to sell the hopper with the dyer + 2x term. The machine has not been worked on for 2 years, the machine is plugged in and there is an opportunity to test it. + Robot Engel ERC 13/1E

used Engel machine type Victory ES3550/600HL with additional peripheral devices. Number of hours: 1979 Injection unit: Screw diameter: 70mm Injection volume: approx. 1500cc Closing unit: Closing force: 600T Table dimensions: attachment, enlarged version Ejector: hydraulic Closing system: hydraulic, tie-barless Control: CC100 – Polish language Additional equipment: Hydraulic core string on the fixed side – x3 Hydraulic core string on the moving side – x3 Pneumatic valves – x2 Hydraulic cascade valves – x6 Automatic drives of side covers on both sides of the form, The machine is serviced by an authorized Engel service center, In 2020, a set of hydraulic pumps was replaced with new ones, Dimensions: Weight – 38T short circuit unit, 10T injection unit, Dimensions (L x W x H): 9410 x 2480 x 2580 Power supply: Pump/Motor: 60kW Heaters: ...

The injection molding machine is in good working order, sold due to the completion of the project. If necessary, it can be seen in operation. Clamping force: 340 t Injection capacity: 113 cm³ Screw diameter: 30 mm Equipment: Turntable

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Closure components: Closing force: 130 t Clearance between columns: No columns Max dimensions of the table plates: 750x700 mm Ejector: hydraulic Closing system: hydraulic Control: CC 100 EBIAS 9.42 Working hours: 73276 Robot: ER-HLI 51 VC EP5

Engel ES 1350/275 HL ST Year of production: 1999 Injection components: Screw diameter [mm]: 60 Max injection weight PS [g]: 547 Injection pressure [bar]: 1834 Closure components: Closing force [kN]: 2750 Table plates dimensions [mm]: 1050 x 900 Min / max mold height [mm]: 350/850 Ejector stroke [mm]: 380 Control: EC100 Additional equipment: Robot: Engel ER-HLI71 Hot runners - 6 items Hydraulic cores 1 pc Pneumatic cores 1 pc Dimensions: Length / width / height [m]: 7.1 × 2.9 × 2.7 Weight [t]: 19.6 The machine is still in operation and can be inspected at the companys premises. You can make a purchase only after inspecting the machine at the companys premises

Machine dimensions Length 2800mm Width 1500mm Height 3500mm Weight 4500 kg Closing system Closing type vertical; column-less Clamping force 80t Injection system Screw diameter 18 mm Max injection pressure 11.50 Pa Max injection volume 50g Additional equipment cnc control Vertical injection Pressure measurement in the mold

screw diameter 55mm, max stroke volume 475 cm3, injection pressure 1179 bar, increased injection pressure 1579 bar, clamping plates 860x830mm, max mold height 700mm, max plate spacing 950mm, 146156 Mh, included in the sale and price is the manipulator ERC43/1-EA

Engel 330/90HL injection press Year 1996 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel 600/145 injection molding machine Year 1995 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel ERC 33 injection molding machine Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel 330/80 injection press Year 1990 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Key data: 900 kN, 140 g/PS, 35 mm

Year of construction: 2006 Clamping force: 90 tons. Screw diameter: 35 mm Pump hours: 46393 h

Key data: 1000 kN, 40 mm

warehouse no.: 503248 manufacturer: ENGEL type: e-motion 440-100 controller: CC200 year of construction: 2017 clamping force: 1000 kN size of mould plates h: 740 mm size of mould plates v: 700 mm min. mould height: 450 mm max. mould height: 720 mm max. open daylight: 1150 mm opening stroke: 430 mm screw diameter: 40 mm swept volume: 220 ccm injection pressure: 1930 bar measures of machine lxbxh: 5.3m x 1.6m x 2.2m total weight: 10000KG equipment included: screen text german Anti vibration mounts

Key data: 350 kN, 18 mm

Manufacturer: ENGEL, type Insert Insert 80H/35 Construction: Rotary table Clamping force: 35 t Year of manufacture: 2011 - neat condition, maintained, no oil leakage. Commissioning: 23.11.2011 Hours: 36,077 hours Injection unit: 18 mm Control: CC200

Key data: 900 kN, 22 mm

warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 4x

Injection moulding machine ENGEL CL 2550/550 Year of production - 2005 Robot name – "ENGEL ERC53/1-F" Clamping force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mould height [mm]-310 Max. mould height [mm]-800 Column spacing (mm) -915x860 Mounting plate size(mm)-1345x1280 Ejector stroke (max) [mm]-250 Screw diameter [mm]-80 Injection weight [g]- 1800 Oil quantity [liter]-1000 Mold Injection Sequence -2 Robot machine ready to work Number of hydraulic cores S/R- 1/1

Clamping unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 1050 x 900 Min./ max. mould height [mm] min 350 Maximum opening width [mm] 1200 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 556 Injection weight [g] 130 Injection pressure [bar] 1763 Electrical-hydraulic equipment Pump motor rated power [kW] 37 Heater power [kW] 19,8 Dimensions & Weight Net weight with control cabinet [t] 19

Electric Injection Molding Machine ! Clamping unit Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 720 x 600 Injection Unit Screw diameter [mm] 35 Injection volume [cm3]: 154 Injection weight [g] 140 Injection pressure [bar] 2400 Dimensions & Weight Net weight with control cabinet [t] 5,7 Dimensions (L x W x H) [m] 4.7 x 1.4 x 2.7

Key data: 3500 kN, 70 mm

warehouse no.: 503394 manufacturer: ENGEL type: ES 1800-350 HL controller: CC100 year of construction: 2004 operation hours: 69000 h clamping force: 3500 kN size of mould plates h x v: 1050 x 980 mm min. mould height: 350 mm max. open daylight: 1300 mm opening stroke: 950 mm screw diameter: 70 mm swept volume: 1039 ccm injection pressure: 1441 bar equipment included: screen text german machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine without material hopper Anti vibration mounts technical data robot-system: ENGEL ER-HLI 81 year of construction: 2004 measures of machine lxbxh: 7.98m x 2.22m x 2.57m total weight: 30750KG

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

Key data: 500 kN, 88 g/PS, 30 mm

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Cda3icllsq Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

Key data: 500 kN, 88 g/PS, 30 mm

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

Key data: 1800 kN, 460 g/PS, 55 mm

ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement