We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,105 used machines on RESALE, but how to find them? Machine Search
used
Engel injection moulding machine Type: It 2000 / 650 control: EC88 year: 1991 Clamping unit Clamping force t 650 Gap mm: 900 Holm dimension mm: min/max height of 1025 x 925 mm: 600 x 1120 Plate size: 1500 x 1390 injection unit Screw diameter mm: Gr 70 injection weight: 1050 Injection volume cm m³: 1154 Spray pressure bar: 1440 Dimensions and weights Dimensions Lxwxh m: 9.8 x 2.7 x 2.3 machine weight kg: 30,000/10,000 Miscellaneous Sanzgiri SMB 621 CM robot system, model 1998 cascade system 4 core puller
Engel injection moulding machine Type: Angel it 330 H/200W/150-2F control: CC 100 A03 year: 2001 Clamping unit Clamping force t 150 Min/max height mm: 1050 Plate size: 820 x 750 injection unit Screw diameter mm: 30/30 Injection weight gr: 104/91 Injection volume cm m³: 128/108 Dimensions and weights Dimensions Lxwxh m: 5.9 x 1.6 x 2.3 machine weight kg: 11,500 Miscellaneous 1 Core battery for injecting including servo valve control 2 components with Angel ERC 23/1-E robot
used
Engel injection moulding machine Type: It with 7000 / 900, Sanzgiri robot system. Control: CC 90 built: 1988 Clamping unit Clamping force t Gap between 900 mm: 1000 Min/max height mm: 400/1000 plates size: 1500 x 1500 Injection unit Screw diameter mm: 120 injection weight gr: 4886 Injection volume cm 3: 5429 spray pressure bar: 1320 Dimensions and weights Dimensions Lxwxh m: 13.2 x 2.7 x 2.9 machine weight kg: 47,000/20,000 Miscellaneous EUROMAP 12 Sanzgiri robot system.
used
Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20.
used
Engel injection moulding machine Type: 650/275 HL control: CC100 year: 2003 Clamping unit Clamping force t: 275 gap mm: 855 Injection unit Screw diameter mm: 50 injection weight gr: 364 Injection volume cm 3: 393 spray pressure bar: 1246 Dimensions and weights Dimensions Lxwxh m: 6.8 x 2.4 x 2.5 machine weight kg: 20.400 Miscellaneous EUROMAP 12 PDF FILE PRINTING CONTACT
used
Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling.
used
Engel injection moulding machine Type: 650 H / 500V / 200 HL-2F control: CC100 year: 2000 Clamping unit Clamping force t: 200 gap mm: 700 Min/max height mm: 300 sheets size: 920 x 880 Injection unit Screw diameter mm: Gr 45/25 injection weight: 286/40 Injection volume cm 3: 318/49 spray pressure bar: 1520 / 1230 Dimensions and weights Dimensions Lxwxh m: 6 x 2 x 2.50 machine weight kg: 13,500 Miscellaneous EUROMAP 12 3 component core 2 Tiebarless PDF FILE PRINTING CONTACT
used
Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation.
used
Engel injection moulding machine Type: 650 H / 200 HL control: CC100 built: 1997 Clamping unit Clamping force t: 200 gap mm: 700 Min/max height mm: 250 sheets size: 820 x 750 Injection unit Screw diameter mm: Gr 45 injection weight: 286 Injection volume cm 3: 318 spray pressure bar: 1520 Dimensions and weights Dimensions Lxwxh m: 6 x 2 x 2.2 machine weight kg: 13,500 Miscellaneous Tiebarless core EUROMAP 12 pul PDF FILE PRINTING CONTACT
used
Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible.
used
Weight: 9.1t, the machine is leaking and the control card is missing.
used
Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- 600g, screw diameter: 55mm, L/D20, with 2x core puller hydraulic 1-fold, 2x core puller pneumatic, 1-fold mold temperature control, standard up to 90°C, an on-site inspection is possible.
used
Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible.
used
J. Engelsmann mobile lifter for containers etc., max. weight 300kg, fork length approx 700mm, fork diameter 50mm, fork gap approx. 600mm, max. lift approx. 1700mm from the floor.
used
Engel injection moulding machine old
used
Y-travel: 1000mm, z-travel: 3800mm, connected load: 4kW.
used
Weight: 200kg, an inspection is possible.
used
Injection molding machine ENGEL ES570 for clamping forcé 125 Tons from 1999 in working conditions. Further information please contact. Good price for liquidation. Directly from the factory where they were working.
used
Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.
used
used, good condition radial drilling machine / Kesselradiale of Collet and Engelhardt, type BUV 1000 Head is rotating and swiveling. The machine is fully moveable. Technical data Spindle retainer 4 MK Drilling capacity approx. 40 mm RADIUS approx. 900 mm Dimensions L x W H approx. 2100 x 1000 x 2500 mm Weight approx. 2500 kg
used
Manufacturer/manufacturer: Angel Typ/type: 330/75 HL - V Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 750 kN Holmabstand/Dist.Betw.Tiebars: -. Disk size/platen size: 660 mm x 560 mm WZ height/mould hight: min 200 mm Opening/opening stroke: 450 mm Plate distance of max/Max open daylight: 650 mm Auger/screw size: 40 mm Stroke volume/shot volume: 201 cc spec. Spritzdr / injection pressure: 1600/2180 bar General / General Engine power: 15 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 3.8 m x 1.3 m x 2 m Weight/weight: 4900 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robots / robotic interface
used
Manufacturer/manufacturer: Battenfeld Typ/type: BA 2000-1000 BK Year/year: 1999 Control/controller: CC 100 Clamping force/clamping force: 1100 kN Holmabstand/Dist.Betw.Tiebars: Disk size/platen size: 730 mm x 600 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 50 mm Stroke volume/shot volume: 251 cc spec. Spritzdr / injection pressure: 1300/2050 bar General / General Engine power: 18.5 kW Heating/heating power: 9.2 kW Dimensions/dimensions: 4.8 m x 1.4 m x 2 m Weight/weight: 6000 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 2 Robots / robotic interface
used
ENGEL 120 ton year `2014 x 2 units injection molding machines -Model : VC330/120 TECH PRO -Clamping force : 120 ton -Screw diamter : 30mm -Manufactured year : 2014
used
Machines are still in use. Will be available soon. Pictures and technical data on request.
used
PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET
used
Angel 2-K machine Angel Robot ERC
used
Description SILICONE PRESS Complete with REINHARDT-TECHNIK LSR 200 silicone pumping unit year 1998
used
Description 13 zone mold heating working hours: 3447
used
Description increased floor
used
Description Rubber molding machine Working hours: 18.000
used
Description Rubber molding machine Working hours: 27.000
used
Description Rubber molding machine Working hours: 27.000
used
Hydro motor for screw cylinders Injection unit size ES3550 Hägglunds Drives type CA50 20 2 0 0 N 004
used
Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550
used
No. 4896: 1 gebr. Vertical milling head Fabr. COLLET + ENGELHARD, type BN 100 ( BFfb 85 / 110 ),
used
ENGEL VC200/50 TEHC PRO -Clamping force : 50 ton -Screw diameter : 25mm -Manufactured year : 2009 x 1 unit & 2010 x 3 untis
used
used
Description MACHINE WITH SERVO PUMP MOLD REDUCTION PLATE THICKNESS 70mm
used
Description MACHINE WITH SERVO PUMP MOLD REDUCTION PLATE THICKNESS 70mm
used
Description Euromap 67 robot interface plus adapter to euromap 12 hot chambers 4 zones
used
Description mold holder planes 740 X 680 New screw and barrell Sprue removal robot ENGEL mod. ER-USP 5 year:2006 pieces falling chute with waste selector
used
ENGEL two shot (2k) 2300 ton injection molding machine -Model : DUO 23050H/11050M/2300 COMBI -Manufactured year : 2009
used
Inv. Num: 5345 Type: Insert 330H 90 Producer: Engel Generated: 2006 Parameters: Clamping force: 340 t Injection capacity: 113 cm3 Screw diameter: 30 mm Facilities: Turntable
used
used
used
Description Integrated robot: X: 1000 mm Y: 1400 mm Z: 2360 mm ROTATION 90 ° 1 BLOW (forceps) 2 EMPTY switchable
used
Description ROTARY TABLE: DIAM. 700 mm
used
Description Mold heating 32 zones MACHINE SOLD IN THE STATE IN WHICH IT IS Missing monitor and floppy drive Missing tabs: - 2 AR281 cards - 3 TT081 boards - 1 PS244 / A card - AS141 connector (for closing transducer)
used
used