We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,321 used machines on RESALE, but how to find them? Machine Search
used
Arburg Allrounder 570 C 2000-675 Injection Moulding Machine 200 Ton Machine is in good condition
used
Complete screw and cylinder with filament and lockable nozzle. NEW!
used
INJECTION UNIT Screw diameter: 55 mm Calculated injection volume: 558 cm³ Pressure on the material: 2380 bars CLOSING UNIT Closing force: 2500 kN Mold thickness Mini / Max: 300 mm Passage between columns: 630 x 630 mm EQUIPMENT EUROMAP robot socket 2 Cores
used
Manufacturer: Arburg Model: 100T 420 C 100 - 250 CENTEX Year of manufacturing: 1999 Capacity: 100 Tn
used
Manufacturer Engel Type ES 200 -50 HLST Control CC 100 Built in 1997 Engine hours h 27800 Closing unit Closing force t 50 Opening path mm 450 Installation height min/max mm 200 / 650 Plate size 660 x 560 Spraying unit Screw diameter mm 35 Spray volume cm3 135 Spray weight gr 121 Dimensions and weights Machine weight Kg 4700
used
Manufacturer : Arburg Model: ALLROUNDER 520C 2000/350 Closing force: 200T Bi-material Year of manufacture: 12/2000
used
Manufacturer Engel Type ES 80-25 HLS EC88 s Control EC88 s Built in 1997 Closing unit Closing force t 25 Opening path mm 330 Plate size 280 x 470 Spraying unit Screw diameter mm 25 Spray volume cm3 68 Spray weight gr 61 Dimensions and weights Machine weight Kg 1800 Other
used
Manufacturer Arburg Type 370 M 600-200 Control Multronıca Built in 1996 Closing unit Closing force t 60 Opening path mm 500 Holm size mm 370 x 370 Installation height min/max mm 250 Plate size 545 x 545 Spraying unit Screw diameter mm 35 Spray volume cm3 144 Spray weight gr 121 Spray pressure bar 1750 Dimensions and weights Machine weight Kg 3600 Other core train
used
Amlifier card VT 5041 for ENGEL hydraulic
used
Closing force: 250 T Opening stroke: 600 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Minimum mould: 300 mm Max gap between trays: 1300 mm Motor power: 45 kW Heating power: 25.9 kw
used
Closing force: 250 T Opening stroke: 600 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Injection: Screw diameter: 55 mm cm3: 558 Bars: 2380 General: Closing weight: 14 Tons Dimensions length: 6.7m Dimensions width: 2.25m Dimensions height: 2.3m Options: Cores: 1 Robot interface: no Bi metal: yes 2 blow guns
used
Closing unit Clamping force t: 200 Opening path mm: 650 Holm size mm: 470 x 470 Installation height min/max mm: 300/950 Plate size: 715 x 715 Spraying unit Screw diameter mm: 45 Spray weight gr: 240 Spray volume cm3: 286 Dimensions and weights Dimensions LxWxH m: 5.8 x 2.1 x 2.1 Machine Weight Kg: 7800 Other - 1 core - robot Interface Euromap 12
used
Bosch control valve 4 WRP 10 for ENGEL
used
Clamping force [kN] 250 Dimensions of mounting plates (hxv) [mm] 750 min./ max. mold height [mm] 127 - 227 Maximum opening width [mm] 352-542 injection unit Screw diameter [mm] 22 Injection volume [cm3] 34 Injection weight [g] 31 Injection pressure [bar] 2000
used
Ship unloading system TA 12/15 FA 38 of the manufacturer NEUERO Engelbrecht + Lemmerbrock GmbH & Co., Melle. Built in 1988 It is a pneumatic suction system for the extraction and conveyance of grain or similar pneumatically conveyable bulk materials from ships. Via a telescopic swivel arm and a suction nozzle, the material to be conveyed is sucked in by the air flow generated by the blower and conveyed into the suction separator. There, the material to be conveyed is separated from the suction air flow and discharged via the rotary valve. All motion drives of the telescopic boom are hydraulic. Electrical connection: 380 V Technical documentation of the manufacturer and various invoices for replacement parts available. A magnetic separator was retrofitted. The rotary valve was replaced in 2018 (EUR 8,875) and has not been used much since then. New filters available. ...
used
Working industrial used Visible by appointment Material preheater Arburg brand
used
This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with an ARBURG SELOGICA control unit. The machine has a clamping force of 800 kN and a screw diameter of 30-40 mm.
used
This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2001 in Germany. It is equipped with an Arburg control unit. The machine has a clamping force of 800 kN.
used
This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min 250 mm.
used
This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm).
used
This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit.
used
Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).
used
used
Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 795x795 Clearance between columns (hxv) [mm] 570x570 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 392 Injection weight [g] 356 Injection pressure [bar] 2000 Electrical and hydraulic equipment Rated power of the pump motor [kW] thirty Heater power [kW] 14.9 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (length x width x height) [m] 5.53x1.79x2.20
used
Clamp force: 850kN, heating output: 8.4kW, connected load: 9kW, weight: 930kg.
used
Clamp force: 850kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
used
Arburg Injection Moulding Machine Type: 520 C 2000-675 Control: Selogica Built: 1999 Closing unit Clamping force t: 220 Opening path mm: 900 Holm size mm: 520 x 520 Installation height min/max mm: 250 Plate size: 715 x 715 Spraying unit Screw diameter mm: 60 Spray weight gr: 427 Spray volume cm3: 508 Spray pressure bar: 1400 Dimensions and weights Dimensions LxWxH m: 5.6 x 1.7 x 2.2 Machine Weight Kg: 7050 Other - Clamping force increased to 220 KN - resistant plastification unit - 2x core pull - Robotinterface Euromap12
used
Connected load: 17.71kW.
used
Connected load: 37kW.
used
Clamp force: 350kN, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
used
Clamp force: 350kN, heating output: 4kW, connected load: 15kW, weight: 1.7t.
used
Max. clamping force: 350kN, max. opening force: 31.1kN, distance between tie-bars: 270x270mm, weight: 1.8t.
used
Clamping force: 270kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
used
Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
used
Ejection stroke: 35mm, weight: 700kg.
used
Clamp force: 750kN, heating output: 11kW, weight: 3t.
used
Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t.
used
Clamping force: 85t, heating output: 5.56kW, connected load: 24.1kW, weight: 2.4t.
used
Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t.
used
There are two identical injection moulding machines available.
used
Screw diameter: 35mm, clamping force: 50t, including Handling Walldorf, documentation and software.
used
ARBURG injection moulding machine Type: 420 V 800-150-150 2Component, with turntable controller: SELOGICA year: 1998 Clamping unit Clamping force t Gap between 80 mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 545 x 545 Injection unit Screw diameter mm: 25/25 Injection weight gr: 49/49 Injection volume cm m³: 54/54 Spray pressure bar: 2500 Dimensions and weights Dimensions Lxwxh m: 4.7 x 1.7 x 2.1 machine weight kg: 5000 Miscellaneous 2 Component with turntable (with turntable)
used
There are eight ARBURG Allrounder 220M available.
used
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation.
used
Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, without documentation.
used
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.
used
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.
used
Connected load: 42kW.
used
Connected load: 40kVA.
used
Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.