We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,106 used machines on RESALE, but how to find them? Machine Search
used
Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- 600g, screw diameter: 55mm, L/D20, with 2x core puller hydraulic 1-fold, 2x core puller pneumatic, 1-fold mold temperature control, standard up to 90°C, an on-site inspection is possible.
used
Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible.
used
Y-travel: 1000mm, z-travel: 3800mm, connected load: 4kW.
used
Weight: 200kg, an inspection is possible.
used
Offer: Engel Duo 940H/940 M/650 Combi Year 2011 2x Viper Robot 40 PS: Machine free from approx. 08/2021
used
clamping force: 1.300 kN injection volume: 106 / 43 cm³ screw diameter: 30 / 25 mm platen size: 850 x 750 mm daylight between platens - max.: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...
used
clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 17 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1450 bar - Spec. injection pressure increased: 2210 bar - Nozzle path: 200 mm - Operating hours: 54716 h - Pump drive ...
used
clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 16 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1451 bar - Spec. injection pressure increased: 2205 bar - Nozzle path: 530 mm - Operating hours: 54716 h - Pump drive ...
used
spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...
used
Offer: Engel Duo 940H/940 M/650 Combi Year 2011 2x Viper Robot 40 PS: Machine free from approx. 08/2021
used
ENGEL DUO7050/500 (500 ton & 70mm screw)
used
- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (Z): 1.400 mm - Stroke (Y): 800 mm - Stroke (X): 400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic
used
clamping force: 250 kN injection volume: 49 cm³ screw diameter: 25 mm platen size: 300 x 300 mm Condition: used, specification: C-frame injection moulding machine - used clamping unit: - clamping force: 250 kN - heating platen size: 300 x 300 mm - clamping/opening stroke: 330 mm - Closing direction: from below - Lateral ejector: yes - Ejector stroke/force: 115 mm / 12 kN Injection unit: - Injection volume max.: 49 cm³ - Screw diameter: 25 mm - Screw length: 16 - Screw speed max.: 250 rpm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE - Connected load: 55 kW/92 A - Weight approx.: 3,500 kg Various accessories are also available: - Injection unit (25 screw) - 2 heating plates - Funnel and various small parts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Used machine in good condition. Available for immediate delivery. - Air Valves: 1 - Screw diameter: 50 mm - Shot weight max: 353 g - Injection rate: 217 cm?/s - Injection pressure: 1.430 bar - Injection volume: 343 cm? - Platen size (h x v): 820 x 750 mm - Ejector force: 1750 kN - Core pulls: 1 - Power: installed max: 15,3 + 30 kW - Operating hours: 0 - Dimensions (long x wide x high): 5.750 x 1.680 x 2.190 mm - Weight: 11.500 kg
used
Screw diameter 30mm Spray weight 88g Spray pressure 1450bar Dosing volume 99ccm Clamping force 40t Size of clamping plates 550x430mm Controller CC90 (Norwegian language) Weight 3000kg Dimensions 3,51x1,22x1,90m Heating capacity 6.9 kW Total power 21,9kW
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 104 g - Injection rate: 111 cm?/s - Injection pressure: 2.400 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Screw L/D ratio: 23,6 - Nozzle stroke / force max.: 250 / 47 mm / kN - Nozzle stroke max: 160 mm - Clamping force: 1.600 kN - Mould opening stroke max: 600 mm - Mould height max: 300 mm - Mould height min: 300 mm - Daylight between platens max: 900 mm - Distance between tie-bars h: 550 mm - Distance between tie-bars v: 550 mm - Platen size h: 750 mm - Platen size v: 750 mm - Ejector force: 61 kN - Control: CC200 - Oil tank capacity: 460 l - Power: installed max: 30 kW - Operating hours: 28.140 - Dimensions (long x wide x high): 5.800 x 1.700 x 2.400 mm - Weight: 9.500 kg
used
ENGEL E-DUO 1340/700 (700 ton & 60mm screw) injection molding machine
used
Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes
used
Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes
used
Engel Victory 200/50 Focus (150) without funnel General information Item number: 150 Availability: In stock Year of construction: 2007 Brand: Engel Specifications Spray weight: 89 g Clamping force: 500 kN Screw diameter: 30 mm Spray pressure: 1451(2205) bar Spar spacing: Tie barless Clamping plate size: 450 x 500 mm Control: EC 200 Language: German Power: 31 kW Operating hours: 79044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m Funnel: No Core train: Yes
used
Pump system 75kW 140_140_71 Spare part number: 0403-620-10-10-160 Manufacturer number: UC 0603/001111003 IMB5 + MNR: R901021899 + valve MNR: R900702586 MNR: R901021899 + valve MNR: R900702586 MNR: R901021900 + valve MNR: R900702586 - Fully functional - Expanded from: Engel_DUO2550H-2550M-900WP combi, 160174, 2006
used
As of today, 92,434 operating hours, Screw diameter is 190 mm. Aggregate 45050. L/D 22 Barrier screw with mixed part. Dosing distance 900 mm displacement 25,520 sqcm. Shot weight approx. 18 kg. Length of the machine 17,418 mm Width of the machine 4,300 mm Height of the machine 3436 mm Weight of the machine 156 to. With oil pan Robot ERC 125/0-F, / Year of construction 2006 Lights Holab distance 2,000 x 1,600 mm (h / v) Clamping plates 2,900 x 2,500 mm (h / v) Max plate spacing 3,800 mm Min tool installation height 800 mm Max tool installation height 1,800 mm 32 heating zones Core pulls 2 pieces fixed side / 4 movable side Needle closure / cascade hydraulic 10 pieces Needle closure / cascade pneumatic 8 pieces
used
screw size:70 mm clamping force:3.500 - 5.000 kN screw size:70 mm max. swept volumne:1.155 cm³ injection pressure:1.480/1.780 bar Injection unit complete with hydraulic block and valves (available twice). The injection units were installed on an ES900WP combi! Payment terms: 100% prior to delivery
used
Key data: 900 , 134 , 35
Now fully refurbished and in our stock in Wellingborough, Northamptonshire is this tie-bar-less Engel Victory 330/90 Tech injection moulding machine. Fitted with a 35mm plasticising unit which gives a maximum shot weight of 134 (PS) (g). This is a high specification machine with double core pull, CC100 controller, singe pneumatic core pull and 8 zone hot runner controller built in. It comes complete with system disks to suit the machine. The unique design of these machines allows for large tools to be installed with ease and often much larger than could go in comparable 90T machines with tie-bars. A very versatile machine with proven technology and good support from the people at Engel UK. This machine is now holding maximum lock, has no detectable wear in the plasticising unit and is cosmetically excellent. You can find out more about the work we’ve done to this specific machine by ...
used
- Euromap: E12 press, E67 robot, connected by E12 / E67 converter - Including Wittmann W733-0398 robot 2007, X900, Y1800, Z3000, C-pneu - Screw diameter: 55 mm - Injection volume: 617 cm? - Screw L/D ratio: 20 - Clamping force: 3.500 kN - Mould height max: 860 mm - Mould height min: 250 mm - Cascades / Sequential valve gates: 4 - Platen size (h x v): 1.080 x 1.080 mm - Distance between tie-bars (h x v): 735 x 735 mm - Ejector force: 3.500 kN - Control: CC100
used
used injection moulding machine in fully functional condition Manufacturer: Engel Type: ES 330/75 Year of construction 2002 Masch.Nr. on request Control: EC100 Clamping unit Clamping force: 750 kN/ 75 to. Spar spacing: tie barless Tool clamping plates: 660 x 560 mm (hxv) Opening distance: 450 mm Wkzg. Installation height: 235 mm min. Distance clamping plates: 685 mm max. BAP/FAP centering: 110 mm Fq7zqir Injection unit Screw diameter: 30 mm (highly wear-resistant bi-metal) Spray volume: 113 cc Spray weight: 102 gr/HP Spray pressure: 2152 bar /2415 (increased) Extras Robot Interface (indiv) Machine without spray-sided full cladding Conveyor belt interface Interface Operating Data Acquisition Tool locking interface Interface for pneumatic closure nozzle Interface for 32-pin peripheral equipment Microcomputer with TFT color screen (EC100 A03) Witt ...
used
- ENGEL ER-IS Interface. - Prepared for CC300 Control - Compatible with machine: VC from 28 to 220t EM from 30 to 160t EMC from 50-180t - 1 x vacuum circuit - 1 x compressed air circuit - Compatible machine: VC88-220, EM30-160, EMC50-180 t - Stroke (X): 400 mm - Stroke (Y): 800 mm - Stroke (Z): 1.400 mm - Payload: 5 Kg - Driving method: X, Y, Z: servo, C: pneumatic
used
Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 460 x 410 mm - Screw diameter: 25 mm - Shot weight max: 54 g - Injection rate: 108 cm?/s - Injection pressure: 2.400 bar - Injection volume: 59 cm? - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 225 / 28 mm / kN - Clamping force: 1.000 kN - Mould opening stroke max: 350 mm - Mould height max: 450 mm - Mould height min: 150 mm - Daylight between platens max: 800 mm - Platen size (h x v): 650 x 600 mm - Cascades / Sequential valve gates: n/a - Heating zones: 4 2 - Control: CC200 - Core pulls: n/a - Oil tank capacity: - l - Operating hours: 16.280 - Power: installed max: 22 kW - Weight: 4.500 kg - Dimensions (long x wide x high): 4.300 x 1.300 x 1.900 mm
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 293 g - Injection rate: 230 cm?/s - Injection pressure: 2.360 bar - Injection volume: 318 cm? - Screw speed: 230 rpm - Nozzle stroke / force max.: 350/67 mm / kN - Ejector stroke / force max.: 200/83 mm / kN - Clamping force: 3.000 kN - Mould opening stroke max: 850 mm - Mould height min: 350 mm - Daylight between platens max: 1.200 mm - Platen size (h x v): 1050 x 650 mm - Mold opening force: 196 kN - Control: CC100 - Oil tank capacity: 810 l - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.700 x 2.000 x 2.300 mm - Weight: 21.000 kg
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 90 mm - Injection pressure: 1.919 bar - Injection volume: 2.740 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 300 / - mm / kN - Clamping force: 8000 kN - Mould opening stroke max: 1.350 mm - Mould height max: 2.000 mm - Mould height min: 650 mm - Platen size (h x v): 1.570 x 1.480 mm - Distance between tie-bars (h x v): 1.025 x 935 mm - Core pulls: 5 - Operating hours: 62.870 - Dimensions (long x wide x high): 10.085 x 5.300 x 2.120 mm - Weight: 38.000 kg
used
Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Shot weight max: 460 g - Injection pressure: 1.650 / 2.050 bar - Injection volume: 510 cm? - Clamping force: 3.500 kN - Mould opening stroke max: 1.000 mm - Daylight between platens max: 1.650 mm - Platen size (h x v): 1.200 x 1.100 mm - Distance between tie-bars (h x v): n/a mm - Control: CC200 - Core pulls: 4 - Power: installed max: 45 kW - Dimensions (long x wide x high): 7.500 x 2.200 x 2.400 mm - Weight: 27.000 kg
used
ENGEL DUO 3550H-500M / 800 WP ENGEL Viper Robot 40
used
Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
used
Engel - 550 tons machine - Bi-injection
used
Manufacturer: ENGEL Type: CL1800/350 Year of construction: 2003 Clamping force: 350 tons Spar spacing: 735 x 735 mm Screw diameter: 60 mm Displacement: 763 cm³ Control: EC100 Equipment: -Robots, Manufacturer: ENGEL, ERC -2.0 core trains Available from December 2022
used
Manufacturer: ENGEL Type: VICTORY300/120TECH Year of construction: 2008 Clamping force: 120 tons Spar spacing: Tie barless Screws DN: 40 mm Moulded part weight: 180 g/Ps Control: EC200 Equipment: -Robot interface -2.0 core trains
used
Warehouse No.: 503240 manufacturer: ENGEL type: Victory 650-120 Tech EC200 A02 Year of Construction: 2008 Operation hours: 60000 h clamping force: 1200 kN Size of mould plates H x V: 740 x 680 mm Min. mould height: 300 mm Open Daylight: 800 mm Opening stroke: 500 mm Screw diameter: 45 mm SWEPT Volume: 318 cc Injection pressure: 1232 bar Equipment included: screen text english CEE-socket 16A Core Pulling Hydraulically 2x Air Valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface EUROMAP 67 Mould Heating 8x measures of machine LXWXH: 4.86m x 1.5m x 2.1m total weight: 7600KG
used
Inv. Num. : 6278 Type: ES 750/175 HL Producer: ENGEL Generated: 2001 Parameters: Clamping force: 155 t
used
very well maintained and constantly serviced injection moulding machine Manufacturer: Engel Type: VC 500/120 spex Control CC200 year of construction: 2010 Operating hours: 42500 h constantly maintained Special features/extras: 1 x core pull (on BAP) Hot runner: 4 circuits Clamping side: Clamping force: 1200 kN/ 120 tons Tie bar dimensions H X V tie bar-less Platen size hxv: 740 x 680 mm Installation height min: 200 mm Distance between platens max.: 700 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Injection side Screw diameter 40 mm Shot volume 251 ccm Injection weight: 230 gr./hp Injection pressure: 1297 bar (2023 bar increased) H2khaheng Dimensions: 4.82 x 1.48 x 2.01 (L x W x H) Weight: 6,800 kg. - immediately available now in our warehouse in Hanover free on truck or free to your door against freight reimburs ...
used
Inclined conveyor belt on stainless steel profile - Engel WFB100 Year of construction: The inclined conveyor belt on stainless steel profile, with adjustment of the height and angle of inclination Length of the inclined support belt 120 cm, length of the horizontal support belt 260 cm, width of the support belt 40 cm Carriers from the height 8 cm every 28 cm Height of conveyor belt housings 10 cm Mobile conveyor belt, on wheels Price: On request
used
ENGEL electric 180 ton (30mm screw, 300mm/sec injection speed) year `2013
used
Key data: 2000 , 55
warehouse no.: 503272 manufacturer: ENGEL type: VICTORY 1050-200 Power controller: EC100 A03 year of construction: 2004 clamping force: 2000 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1050 mm opening stroke: 750 mm screw diameter: 55 mm swept volume: 511 ccm injection pressure: 1622 bar measures of machine lxbxh: 6.6m x 1.8m x 2.3m total weight: 12900KG equipment included screen text slovenian core pulling hydraulically 1x core pulling pneum. 1x air valve 1x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface for ejector plates safety interface for dosing unit
used
ENGEL ES 330/80 HL injection moulding machine was built in Austria in 1995. A highly reliable and efficient machine equipped with high-end components, is used in the processing of plastics by injection moulding. The combination of high mould clamping force and a powerful screw with a diameter of 35 mm guarantees the high quality of the manufactured products. The injection moulding machine works with injection moulds with a height from 170 to 370 mm, which placed on 710 x 660 mm platens are closed with a force of 80 tonnes. The machine is equipped with an ENGEL CC100 CNC controller for setting injection moulding process parameters, an ENGEL ERC 23/1-CH servo-driven multi-axis robot and a pneumatic and hydraulic core. The tie-bar-less injection moulding machine weighs 5300 kg. Technical specifications for the ENGEL ES 330/80 HL injection moulding machine - maximum clamping force: 80 ...
used
Production year: 2004 Injection unit: .../500 Screw diameter: 40 mm Specific injection pressure: 2019 bar Injection volume: 251 ccm Injection weight: 239 g Tool closure system: 120/... Clamping force: 120 t Tool plate dimensions: 740 x 680 mm Distance between columns: no columns mm Tool height: 300 mm Opening distance: 500 mm Max.Distance plates: 800 mm Ejector stroke: 130 mm General data: Pickup date: Immediately Dimensions (m) LxWxH: 5,1 x 1,5 x 2,1 m Weight: 7600 kg Instrumentation: - 2 x pneumatic valve - hot runner connection - bimetallic injection system - we have to the Picker machine
used
Manufacturer: Engel/Bosch Operating pressure: 280 bar Capacity: 65 l/min Case size: 1800 x 800 x 700 mm Voltage: 380 V Electrical power: 15 kW