engel arburg used for sale

Ref. no.: 18273 Hersteller: ARBURG Year of construction: 2008 Clamping unit Clamping force: 200 ton Opening stroke: 650 mm Distance between tie bars: 520 x520 mm Mould height min.: 250 mm Opening width: 900 mm Platen size (h x v): 728 x 728 mm Injection unit Screw diameter: 55 mm Injection volume: 474 cm³ Shot weight: 434 g Injection pressure: 1650 bar Measurements and weight Dimensions: 5.45 x 1.8 x 2.1 m Machine weight: 7150 kg

Ref. no.: 18271 Hersteller: ARBURG Year of construction: 2005 Clamping unit Clamping force: 200 ton Opening stroke: 650 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Opening width: 900 mm Platen size (h x v): 728 x728 mm Injection unit Screw diameter: 55 mm Injection volume: 474 cm³ Shot weight: 434 g Injection pressure: 1650 bar Measurements and weight Dimensions: 5.45 x 1.8 x 2.1 m Machine weight: 7150 kg

Clamping Force: 50 // Shot Weight (Max): 172

Clamping Force: 500 ton // Shot Weight (Max): 2092 g

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø x 40 mm SN 52331 -Heating power: 350 W -Voltage: 230/250V -Number: 1x heating tape available -Price per piece -Dimensions: 200/130/H40 mm -Weight: 0.2 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø50 x 34mm -Heating power: 310 W -Voltage: 220V -Number: 1x heating tape available -Price per piece -Dimensions: 220/80/H40 mm -Weight: 0.2 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø65 x 130 mm -Item No.: 27.485 -Heating power: 1050 W -Voltage: 230/250V -Number: 2x heating tape available -Price per piece -Dimensions: Ø105 x 130 mm -Weight: 1.1 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Arburg, heating band heating collar -Type: Ø65 x 175 mm -Item No.: 14.587 -Heating power: 1400 W -Voltage: 230V -Number: 3x heating tapes available -Price per piece -Dimensions: Ø105 x 175 mm -Weight: 1.4kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table: comes from an injection molding machine -Make: Arburg -Type: -Dimensions table: 735 x 665 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 735/665/H185 mm -Weight: 230 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: Ø 320 mm -Bore center: Ø mm -Dimensions: 320/320/H163 mm -Weight: 20 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: 490 x 490 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 490/490/H400 mm -Weight: 236 kg

Key data: 2500 , 60

warehouse no.: 503407 manufacturer: ARBURG type: Allrounder 630 H 2500-1300 controller: Selogica direct year of construction: 2019 operation hours: 5186 h clamping force: 2500 kN distance between tie bars h x v: 630 x 630 mm size of mould plates h x v: 900 mm min. mould height: 400 mm max. mould height: 950 mm max. open daylight: 1500 mm opening stroke: 550 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2000 bar equipment included: screen text german core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing technical data robot-system handling type: Linear manufacture: ARBURG controller: MULTILIFT V year of construction: 2019 Z axis: 2000 mm measures of machine lxbxh: 7.2m x 2.1m x 2.2m total weight: 14000KG

Injection moulding machine ARBURG Allrounder 630 H 2500-1300 Stock No.: 503408 Manufacturer: ARBURG Type: Allrounder 630 H 2500-1300 Control: Selogica direct Year of construction: 2019 Hours: 3517 h Technical Data Closing Page Clamping force: 2500 kN Holm v: 630 mm Holm h: 630 mm Plate size h: 900 mm Plate size v: 900 mm Min. installation height: 400 mm Installation height max.: 950 mm Plate spacing max.: 1500 mm Aperture travel: 550 mm Ejector stroke: 225 mm Ejection force: 86 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 60 mm Displacement: 678 ccm Spray pressure: 2000 bar Auger length: 20 l/d Auger stroke: 235 mm Screw speed: 60 min Worm torque: 1640 N Number of heating zones: 8 Nozzle travel: 550 mm Dimensions & Weight Machine dimensions LxWxH: 7.2m x 2.1m x 2.2m Total Weight: 1 ...

Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm

Arburg 320 S 500-150 selogica injection molding machine with a robot Year of production: 1999 Control: Selogica TECHNICAL DATA • Closing force: 500 kN • Clearance between columns: 320 mm x 320 mm • Min form height 225 mm • Max mold height 350 mm • Board dimensions: 446 mm x 446 mm • Opening distance: 425 mm • Max distance. between plates 525 mm • Snail: 30 mm • Shot weight: 65 grams PS • Injection pressure: 2210 bar GENERAL • Engine: 15 kW • Total installed power: 21.3 kW • Dimensions: 3.2 x 1 x 1.8 • Weight: 2250 kg • German language control hours worked 45 970 h number of cycles 8 110 434 pcs Injection molding machine in production all the time As additional equipment, the injection molding machine has an original side manipulator for receiving ingots Regularly serviced, very good conditi ...

Closing force: 1300 kN Clearance between columns: 420 mm x 420 mm Board dimensions: 605 mm x 605 mm Mold size: min 250 mm Opening distance: 500 mm Max distance between boards: 750 mm Snail: 35 mm Injection volume: 139 cc / 127 grams PS Injection pressure: 2500 bar Motor: 22 kW Heaters: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4300 kg

Arburg 270U 40T closing machine with quality flap 38000 pump hours Spindle D: 18mm Year 2006 Perfect condition and working. Extra: Fasti charger/dryer and two desuperheaters Immediate availability. Dr Boy 22A Machine 18000 pump hours D spindle: 22 year 2004 Perfect condition and working. They sold the two together.

Key data: 850 kN, 89 g/PS, 30 mm

Built in 1991 Clamping force: 85 tons. Screw diameter: 30 mm

Key data: 800 kN, 45 mm

warehouse no.: 503399 manufacturer: ARBURG type: Allrounder 370 S 800-350 controller: SELOGICA year of construction: 2004 operation hours: 33700 h clamping force: 800 kN distance between tie-bars h x v: 370 x 370 mm size of mould plates h x v: 570 x 570 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm screw diameter: 45 mm swept volume: 230 ccm injection pressure: 1670 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts Schuko-socket 10A vario injection unit mould heating 2x measures of machine l x w x h: 4m x 1.4m x 2.1m total weight: 3800KG

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

Inv. Num. : 7181 Type: ALLROUNDER 375 V 500 Producer: Arburg Created: 2012 Parameters: Duty cycle: 26913 h Hours: 17470 h Clamping force: 500 kN

Key data: 1000 kN, 35 mm

warehouse no.: 503181 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2012 operation hours: 47142 h clamping force: 1000 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 637 mm size of mould plates v: 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm opening stroke: 350 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar measures of machine lxbxh: 4.4m x 1.62m x 2m total weight: 5280KG equipment included: screen text german CEE-socket 16A air valve 1x machine incl. water flow regulator machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety interface for dosing unit interface USB Schuko-socket 10A m ...

Condition: Used Operating hours: ca. 5.300 Clamping force (t): 25 Mould installation height min (mm): 150 Mould installation height max (mm): 225 INJECTION UNIT: IU70 Screw diameter (mm): 22 Stroke volume (cm³): 34 Injection pressure (bar): 2000 CONTROL Selogica direct Screen language CZ / DE / EN Total installed power (kW): 24,5 Total weigh (kg): 1580

Condition: Used Operating hours: ca. 19.000 Clamping force (t): 25 Mould installation height min (mm): 122 Mould installation height max (mm): 225 INJECTION UNIT: IU70 Screw diameter (mm): 22 Stroke volume (cm³): 34 Injection pressure (bar): 2000 CONTROL Selogica direct Screen language CZ / DE / EN Total installed power (kW): 25 Total weigh (kg): 1920

Key data: 1500 kN, 35 mm

warehouse no.: 503299 manufacturer: ARBURG type: Allrounder 520 S 1500-290 controller: Selogica year of construction: 2018 operation hours: 17400 h clamping force: 1500 kN distance between tie bars h:: 520 mm distance between tie bars v:: 520 mm size of mould plates h: 695 mm size of mould plates v: 695 mm min. mould height: 450 mm max. open daylight: 1025 mm opening stroke: 575 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar measures of machine lxbxh: 4.42m x 1.61m x 2.2m total weight: 5900KG equipment included: screen text german cascade control unit-interface pneu.6x core pulling hydraulically 2x machine without material hopper mould heating 12x

Key data: 1600 kN, 198 g/PS, 40 mm

warehouse no.: 503413 manufacturer: ARBURG type: 1500T 1600-350 controller: year of construction: 2006 operation hours: 34721 h clamping force: 1600 kN distance between tie-bars h x v: 1500 mm round table diameter: 1500 mm ejector stroke: 150 mm ejector force: 46 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar equipment included screen text german CEE-socket 16A rotary table Cascade control hydraulically 4x core pulling hydraulically 2x machine with rotary index table machine incl. water flow regulator machine without material hopper Schuko-socket 10A mould heating 12x measures of machine l x w x h: 5.58m x 2.25m x 2.88m total weight: 12600KG

Arburg 570C 2200-1300 Injection Molding Machine / Hybrid Machine Production year : 2005 Injection system : Screw diameter: 60 mm Injection weight: 558 g Injection pressure: 2000 bar Dosing volume: 664 ccm Locking system : Clamping force: 220 tons Distance between columns: 570x570 mm Size of mounting plates: 795x795 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control system: SELOGICA Additional equipment: Hybrid machine: fast, energy-efficient Euromap 67 Hydraulic core extraction x 2 Injection system - bimetal Machine Main Motor--Inverter Driven Servo Motor--Energy Saving Dimensions: Weight: 9300 kg Length/Width/Height: 6.16x1.91x2.39 m

Arburg 320 C 500-270 injection moulding machine Year of production: 2007 Control type: Selogica Clamping System: Hydraulic TECHNICAL DATA Closing force: 500 kN Clearance between columns: 320 mm x 320 mm Plate dimensions: 446 mm x 446 mm Mould size: min. 200 mm Maximum opening distance: 350 mm Max distance between plates: 550 mm Screw diameter: 35 mm Injection Volume / Injection Weight: 115 ccm / 105 gram PS Injection pressure: 1470 bar GENERAL DATA Motor: 11KW Heaters: 9.5 kW Dimensions L x W x H: 3.9 m x 1.4 m x 1.9 m Weight: 2400 kg

Closure method Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 472 x 472 Clearance between columns (hxv) [mm] 320 x 320 Min./ max. mould height [mm] min 225 Maximum opening width [mm] 575 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 78 Injection weight [g] 71 Injection pressure [bar] 2210 Electrical-hydraulic equipment Pump motor rated power [kW] 15 Heater power [kW] 8,4 Dimensions & Weight Net weight with control cabinet [t] 2.25 t

Clamping unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Maximum opening width [mm] 750 Injection Unit Screw diameter [mm] 35 Injection volume [cm3] 144 Injection weight [g] 132 Injection pressure [bar] 1820 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Heater power [kW]: 6.5 Dimensions & Weight Net weight with control cabinet [t] 3.18 Dimensions (LxWxH) [m] 4.3 x 1.7x 1.8

Key data: 2200 kN, 60 mm

warehouse no.: 503302 manufacturer: ARBURG type: Allrounder 570 S 2200-1300 controller: Selogica year of construction: 2009 operation hours: 25044 h clamping force: 2200 kN distance between tie bars h:: 570 mm distance between tie bars v:: 570 mm size of mould plates h: 795 mm size of mould plates v: 795 mm min. mould height: 250 mm max. open daylight: 900 mm opening stroke: 650 mm screw diameter: 60 mm swept volume: 664 ccm injection pressure: 2000 bar equipment included: screen text german core pulling hydraulically 3x machine incl. hopper loader machine incl. Handling machine incl. safety fencing machine without material hopper Anti vibration mounts technical data robot-system handling type: Linearhandling manufacture: Arburg controller: Multilift year of construction: 2009 handling weight: 15 kg X axis: 700 mm Y axis: 1000 mm Z  ...

Key data: 2500 kN, 50 mm

warehouse no.: 503409 manufacturer: ARBURG type: Allrounder 630 S 2500-800 controller: SELOGICA year of construction: 2012 operation hours: 38000 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar measures of machine l x w x h: 5.8m x 2.85m x 2.21m total weight: 12200KG

Arburg 320K-700-250 (213) General information SKU: (213) Availability: In stock Year of construction: 2004 Brand: Arburg Specifications Spray weight: 121 g Clamping force: 700 kN Stand: Used Screw diameter: 35 mm Spray pressure: 1820 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 35 kW Operating hours: 67,623 h Weight: 2350 kg Dimensions: 3.25 x 2 m Funnel: No

Key data: 700 kN, 29 g/PS, 20 mm

Arburg 320K-700-100 (212) General information Item number: 212 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 29 g Clamping force: 700 kN Stand: Used Screw diameter: 20 mm Injection pressure: 2500 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 31 kW Hours: 88715 h Weight: 2170 kg Dimensions: 3.25 x 2 m Funnel: No

Key data: 700 kN, 85 g/PS, 30 mm

Arburg 320K-700-250 (214) General information Item number: 214 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 85 g Clamping force: 700 kN Stand: Used Screw diameter: 30 Injection pressure: 2470 Tie bar spacing: 320 x 320 Clamping plate size: 476 x 476 Tool installation height min.: 200 Control: Selogica Language: German,Polish Power: 35 Hours: 59684 Weight: 2350 Dimensions: 3.25 x 2 Funnel: No

Key data: 800 kN, 40 mm

Injection moulding machines ARBURG Allrounder 370C 800-250 Stock No.: 503419 Manufacturer: ARBURG Type: Allrounder 370C 800-250 Control: SELOGICA Year of construction: 2005 Technical Data Closing Page Clamping force: 800 kN Holm h x w: 370 x 370 mm Panel size h x w: 570 x 570 mm Min. installation height: 250 mm Plate spacing max.: 750 mm Aperture travel: 500 mm Ejector stroke: 175 mm Ejection force: 40 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical Data Spray Side Screw diameter: 40 mm Displacement: 188 cc Spray pressure: 1820 bar Screw length: 18 l/d Screw speed: 57 min Worm torque: 450 N Plasticizing Current: 202 g/s PS Number of heating zones: 4 Nozzle travel: 240 mm Dimensions & Weight Machine dimensions LxWxH: 4.24m x 1.6m x 2.1m Total Weight: 3180KG

Key data: 2500 kN, 60 mm

Stock No.: 503418 Manufacturer: ARBURG Type: Allrounder 630 S 2500-1300 Control: ECO SELOGICA Year of construction: 2006 Technical Data Closing Page Clamping force: 2500 kN Holm h x w: 630 x 630 mm Panel size h x v: 900 x 900 mm Min. installation height: 400 mm Max. installation height: 700 mm Plate spacing max.: 1000 mm Aperture travel: 600 mm Ejector stroke: 225 mm Ejection force: 86 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 60 mm Displacement: 664 ccm Spray pressure: 2000 bar Auger length: 20 l/d Auger stroke: 235 mm Screw speed: 43 min Worm torque: 1900 N Outdoor injection flow: 202 g/s hp Number of heating zones: 5 Nozzle travel: 550 mm Dimensions & Weight Machine dimensions LxWxH: 6.4m x 2.1m x 2.2m Total Weight: 13500KG

Key data: 400 kN, 21 g/PS, 18 mm

Arburg 270 U 400-70 Year of construction: 5/2006 Clamping force: 40 tons. Screw diameter: 18 mm Operating hours: 36000 h additionally 2 Regloplas temperature control units + dryer feeder Fasti

Key data: 700 kN, 121 g/PS, 35 mm

General information Item number: 209 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 121 g Clamping force: 700 kN Stand: Used Screw diameter: 35 mm Spray pressure: 1820 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 46 kW Hours: 94184 h Weight: 2270 kg Dimensions: 3.25 x 2 m Euromap: Yes

Key data: 700 kN, 121 g/PS, 35 mm

General information Item number: 210 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 121 g Clamping force: 700 kN Stand: Used Screw diameter: 35 mm Spray pressure: 1820 bar Tie bar spacing: 320 x 320 mm Clamping plate size: 476 x 476 mm Tool installation height min.: 200 mm Control: Selogica Language: German,Polish Power: 46 kW Operating hours: 104195 h Weight: 2270 kg Dimensions: 3.25 x 2 m Euromap: Yes

Key data: 1000 kN, 131 g/PS, 35 mm

Arburg 4220C-1000-290 (208) General information Product Code: 208 Availability: In Stock Year of production: 2008 Brand: Arburg Technical data Shot Weight: 131 g Clamping Force: 1,000 kN Condition: Used Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 420 x 420 mm Platen size: 570x 570 mm K8sbfm2u Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 46 kW Working hours: 87.026 h Weight: 3740 kg Dimensions: 4.4 x 2 m Core pull: Yes Euromap: Yes

Key data: 1500 kN, 487 g/PS

Arburg 520A-1500-800 (207) General information Item number: 207 Availability: In stock Year of construction: 2007 Brand: Arburg Specifications Spray weight: 487 g Clamping force: 1,500 kN Stand: Used Screw diameter: 60 mm Spray pressure: 1390 bar Tie bar spacing: 520 x 520 mm Clamping plate size: 700 x 700 mm Control: Selogica Power: 74 kW Operating hours: 63,600 h Weight: 7300 kg Dimensions: 6 m x 2.4 m Funnel: No

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700

Key data: 500 mm, 25

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 25 mm - Injection pressure: 1,800 Bar - Shot volume: 39 cm³ - Working hours: 52,100

Key data: 500 mm, 30

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

General SKUR0232 LocationBarneveld MakeDrais Werke GmbH TypeT-2000 SM No.52000 Year of construction1985 Pressure Working pressure8.2 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor24 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity2118 Ltr Useful capacity2000 Ltr Trough sizesdia. 1200x1900mm Inletdia. 170mm Top connectionsdia. 80mm (2x) , dia. 100mm (1x) Outlet200x200mm Glands air purgedcheck Motor24 kW 380 Volt Speed mixing shaft34 rpm MaterialStainless steel 1.4541 (321) Information Total height1,7 M without filter Weight6000 Kg Floorspace4,2x1,5 M Extra Specificationsincluding rotating valve J. Engelsman AG type 400 V2A nr 6648 year 1985, motor 0.75 kW 220/380 Volt inlet dia. 290mm including filter brand Bucher type AJN 304S content 5200 Ltr. max 100 degr. C height filter 3.7 M dia. 1.6 M. Powder turbo mixersDrai ...

Key data: 1000 kN, 127 g/PS, 35 mm

Regularly maintained machine that is always kept in top condition. The screw rotation is done with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF floppy disk. The display can be done in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 auger for technical materials in good condition. A video of the operation of the machine has also been created, which can also be tried out in person at our site. Please see our other ads.

Type of control: SELOGICA Number of hours: 38,000 hours Closing force: 200T Opening stroke: 650mm Between columns: 570 x 570 mm Tray dimensions: 795 x 795mm Mini/maxi mold: 250 mm Max distance between trays: 1400 mm Injection: Screw diameter: 50 mm Screw length: 20D cm3: 392 Bars: 2000 General: Motor power: 19.9 kW Heating power: 8kw Closing weight: 9T Injection weight: Length dimensions: 5.50 m Width dimensions: 2 m Dimensions height: 2.40 m Options: Cores: 1 Robot interface: yes Bi metal: yes

Injection molding machine ARBURG ALLROUNDER MULTRONICA 100T Parts ARBURG ALLROUNDER MULTRONICA (1996) Model 420 M 1000 - 250 MOOG double pump unit with lantern and cradle (2015) MULTRONICA control cabinet Complete injection unit + heating + pontoon chassis Complete engine assembly with lantern

Number of hours: 45,000 hours Closing force: 40 T Opening stroke: 200 mm Between columns: 270 x 270 mm Tray dimensions: 380 x 380 mm Mini/maxi mold: 150/350 mm Max distance between trays: 550 mm Injection: Screw diameter: 18 mm Screw length: 24.5/D cm3: 23 Bars: 2500 General: Motor power: 11 kW Heating power: 4.1 kW Closing weight: 1.5 Tons Injection weight: Dimensions length: 3 m Width dimensions: 1m Dimensions height: 1.6 m Options: Cores: Robot interface: YES Bi metal: YES