column used for sale

Weibert SB 4132SM Box column drill Technical Specification Motor power - W 1500/2200 400V Drilling capacity in mm 32 Spindle stroke in mm 120 Drilling spindle holder MK4 / MT4 Drilling spindle speed in min-1 (24) 60-3480 Column diameter in mm 90 / 2.5 Gross weight in kg 125 GMHM SB4132SM

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

- Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - Projection 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm. - Operating voltage 380V-50Hz - Infinitely variable speed adjustment, by means of an adjustment lever - Engine speed in 2 stages, 700/1435 rpm - Tapping device with rotation direction change after reaching the end stops - Coolant device fully installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - Precision machine vice new (test winner)

Key data: 25 mm, 225 mm, 150 mm

Drilling capacity steel: ø 25 mm Table dimensions: ø 390 mm Spindle Adapter: MK3 Spindle speeds: 100 - 2900 rpm. Spindle stroke: 150 mm Projection: 225 mm Equipped with: - Drill protection -Drilling Country of origin: Netherlands Motor power: 0.75 kW Machine LxWxH: 700 x 700 x 1800 mm Machine weight: 300 kg

Offer 23380 Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drilling spindle speeds in gear stages 95 - 2000 rpm - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height adjustable 340 x 320 mm - Table can be tilted left + right -Max. Distance table – drilling spindle 500 mm - Max distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm -Lighting - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Key data: 40 mm, 315 mm, 200 mm

Solid column drilling machine of the brand WMW, model BS 25 B Mk4 Ready to use. Technically flawless Machine Type: Column Drilling Machine Make: WMW Saalfeld Type: BS 25 B Year of construction: 1962 Control Type: Conventional Freight base: ex-site, freely loaded Location: 17034 Neubrandenburg Shipping time: immediately Price: 2.250,00 net Technical details Drilling performance in steel (diameter): 6 - 40 mm Projection: 315 mm Drilling stroke: 200 mm Headstock adjustment: 280 mm Spindle speeds - infinitely variable: 63...1000 rpm Spindle mount MK: MK 4 Feed: 0.08...1.2 rpm Clamping surface table L x W: 700 x 600 mm Clamping surface of the base plate: 440 x 490 mm Distance Spindle / Base Plate: 1100 mm Total Power Requirement: 2.61 kW Machine weight approx.: 1000 kg Dimensions machine approx. LxWxH: L:1010 x 700 x 235 ...

Solid column drilling machine of the brand Webo, model E 18 massive rod drill with MK mount in good condition. Otherwise technically flawless. Speed 265-2100 rpm-1 The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder. Maschinenhandel Nord new & used machines for industry, trade and commerce Import/Export Service & Advice Also take a look at our Other Ads. Many more drills available Or visit our more than 1000m² exhibition hall with new and used industrial and manufacturing machines, not far from the A20 motorway!

Key data: 16 mm, 275 mm, 160 mm

Solid Inratirea Column Drilling Machine, Type G-16 Ready to use. technically flawless, except for the cover of the motor fan (Replacement can be provided with purchase) Details: Machine Type: Column Drilling Machine Make: Infratirea Type: G16 Year of construction: 1975 Control Type: Conventional Country of origin: Romania Freight base: from the Neubrandenburg location, freely loaded Location: 17034 Neubrandenburg Price: € 1650,00 net Technical details Drilling capacity in steel (diameter): 16 mm Projection: 275 mm Drilling stroke: 160 mm Spindle speeds - infinitely variable: 150 - 2360 / 9 step rpm Spindle holder MK: 3 Distance spindle/table max.: max: 580 / min: 100 mm Feed rate: 0.10 - 0.16 - 0.25 - 0.40 mm/rev Table clamping surface: 300 x 400 mm Table adjustable: vertical 360 mm Table swivel approx.: rotatable 360° Clamping surface of the base p ...

floor plate size 80x80 cm,

Equipped with: workbench including contents.

Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg

Bohle stationary column for drums and containers, suitable for feeding tablet presses etc. Maximum weight 600kg.

Perfect Column Drill

Never used and packed in box Box size : 110 x 72 x 60 cm

Precision Column drilling machine with additional attachments, for precision metal and wood processing and model making. From the same manufacturer as proxxon. New but without packaging

floor plate size 100x100 cm

From insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Infinitely variable speeds per potentiometer 80-2010rpm automatic feed 0.1--0.2--0.3 Digital speed display Coolant pump Tapping function with foot switch Work light Pinol stroke 150mm Projection 300mm Recording MK 4 Drill chuck Röhm Supra 3-16mm Table clamping surface 330x320mm Height of machine 1930mm Weight approx. 350kg 3KW Power 380 volts

Precision Column drilling machine with additional attachments, for precision metal and wood processing and model making. From the same manufacturer as proxxon. New but without packaging

Equipped with CH-2 140mm machine clamp

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 500 x 460 mm column diameter: 115 mm turning speeds: 75- 3200 U/min feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,5 kW weight of the machine ca.: 350 kg range L-W-H: 2,2 x 0,8 x 0,7 mm Column drilling machine with: Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column-mounted jib crane with chain hoist 125kg Type designation: AS1 25-2,1 Manufacturer: Vetter Krantechnik GmbH YOC: 2019 Condition: very good, like new Delivery available for an extra charge The retail price is net

Key data: 16 mm

Column Drill Speed 200- 3000 rpm 380 V 16 A Height adjustable 55 cm Expellers Drill chuck Albrecht 3 - 16 mm

Unused machine

Probe included

Offer 22090 Specifications: - Drilling capacity in steel ST 60 20 mm - Drilling spindle holder MK 2 - Drilling spindle stroke 120 mm - 4 drilling spindle speeds 400 - 2000 rpm - Projection 250 mm - Max. distance table - drilling spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm

Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance between machined base plate and drilling spindle approx. 1250 mm - Coolant device -Lighting - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Offer 24280 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 175 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 290 mm - Max distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button -Lighting - Machine vise - 15 pieces HSS – drill bits 8 to 20 mm

Key data: 30 mm

Special price € 4,100 instead of 4,930 excl. VAT Solberga SE2030 - Gear drilling machine (new) Recording: MK3 Capacity: 30 mm - The drill head can be swivelled 360° around the column and is height-adjustable. - The gearbox is built with our traditional and tested technology for the highest possible torque. Helical gears in combination of steel and reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. - The spindle is made of steel and ensures optimal concentricity of the tool thanks to its adjustable tapered roller or ball bearing. The machine has an adjustable spindle return spring. This allows the restoring force to be adapted to the weight of the tool. - Automatic feed (M model) - When the preset drilling depth is reached, the spindle returns to its original positio ...

Total size 1050x850x1650mm.

With machine clamp

This column drill from HBM is ideally suited for professional use. It has a tilting work table and a keyless drill chuck (1 to 13 millimeters). A pillar drill like this is intended for professional drilling work in steel. The motor power of 375 watts ensures that it can get quite deep into the material to be drilled. The tilting work table and the high-quality keyless drill chuck ensure a pleasant working experience.

Key data: 5000 mm, 275 mm, 310 mm

Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...

Key data: 25 mm

Special price 2.630,- instead of € 3.090,- excl. VAT - Exact setting of the drilling depth - Suitable for drilling and tapping (optional) - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Quill stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 - Spindle holder: MK3 - Spindle speed: 129 - 1498 rpm - Gear stages: 4 - Max. distance spindle/table: 730 mm - Projection: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 1720 x 500 mm - Weight: 185 kg

On metal base, equipped with 5-point plug.

Key data: 30 t

Hydraulic press can be used in a variety of ways as an assembly press, small series press, manual insert press or heating press in double-column presses Design (H-press) A tour of the press is possible at the Ennepetal camp. It is a 2.5-year-old, unused press with no operating hours, which is sold with a full warranty. List price: 45,000 Technical details: Robust machine frame Capacity: 30 tons – at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW – 15 hp Oil tank: 600 × 450 × 500 mm – with approx. 100 litres Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Fast forward: 45 mm/s Return: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm – with T-slots Plunger plate: 700 × 500 mm – with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Press table size 700 × 500 × 7 ...

Clamp, table adjustable in height, various drills and drill heads, 2x cutting oil, cabinet with drills

x-travel: 2750 mm y-travel: 400 mm z-travel: 325 mm spindle taper ISO: 50 throat: 450 mm turning speeds: 31,5-2000 U/min Feed: 0,4-200 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW  ...