coil used for sale

coil internal dia.: 260-600 mm coil width: ca 150 mm Overall size: 800x1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:180 mm coil weight:0,75 t material thickness:2,0 - 6,0 mm coil external diameter:400 - 1250 mm no. of straightening rolls:5 number of draw-in rolls:2 band speed:20 m/min power requirement:4,0 kW weight:2,8 t dimensions (WxDxH):1,4 x 2,45 x 1,85 m snubber roll:pneumatic

1972, COIL WEIGHT: 32 TON, THICKNESS: 0.8 - 8.0 MM, WIDTH: 1500 MM MAX., MAX. LENGTH OF THE PLATE: 12 000 MM

Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt

DIA. RANGE: 12.7 - 50.8 MM; STRIP WIDTH: 165 MM, THICKNESS: 0.6 - 2.0 MM; COIL WEIGHT: 500 KG, 60 M/MIN., ETC.

1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C

2 pieces Mosca strapping machines, bundling machine - used - : Price per piece from location: 2,295.- EUR (net)! Manufacturer: Mosca Type: RO-TR-13 Year of construction: 1997 Welded closure: Thermal Bandwidth: 5-9mm Belt voltage: Infinitely adjustable Belt unwinders: Belt coils inside- 200 Weight: 415kg mains voltage 200-440V Airpressure: 6 bar Air consumption: 5.4l/stroke noise emission: 75 dB measured according to DIN 45635 pressing pressure: downward max. 650N at 6 bar / upward max. 100N at 2 bar Afield: The fully automatic strapping machine for almost all packaging areas and package sizes: Width: 100mm - 550mm Length: 150mm - 600mm Height: 5mm - 400mm Machine Description: Fully Automatic Plastic Strapping Machine for Poly-Propylene Packaging Tapes. High connection voltage due to minimum distance from the transport plane to the locking unit. Transport speed of 0.1 -0.8 m/sec  ...

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

THIS LINE IS USING FOR ALUMINIUM PROFILES IN PRODUCTION OF WINDOWS, DOORS CURTAIN WALLS ETC. POWER: 60 KW, PLC MITSUBISHI, MAX. WORKING WIDTH: 6.5 M, ALU THICKNESS: 0.2-0.25 MM, STRIP WIDTH: 120 - 230 MM, COIL WEIGHT: 360 KG

System: Used screw conveyor Type: W-DA100LR-D Performance: 1415 r/min Shaft diameter: 90 mm Shaft size: 280 mm Coil height: 300 mm Spiral distance: 180 mm Trough height: 320 mm Trough length: 4200 mm Width: 450 mm Total width of the drive: 910 mm Motor: 3.0 kW Other: product-contacting parts stainless steel

System: Used trough screw conveyors Coil height: 280 mm Spiral distance: 290 mm Trough height: 325 mm Trough length: 5500 mm Width: 440 mm Overall length: 6700 mm Engine: Greifenberger 5,5 kW Other: Center bearing

Qty. 1 Second-hand continuous galvanising line Mfc.: Koryo SanGi, WMS Co., Sumitomo, Dongyang GiGong, Myungshin Mach., Kanto TK, Hitachi, Yuyoung Industry, Cosmo Gas, Hankuk Yugong, Jungwon Mach., Bugong Ind., Hanhyung Industry, SeunJin Mach., Cheongsong Electrics, Jungbu Civil Gas, HK. ENG, Cosmo Construction, KyungJin Construction, Cheonsu Hwankyung Ind., Shinhyeung Built: 1983 Some revamp in 2005 Material: Cold Rolled mild steel FH Strip Width: 650 - 1.250 mm Thickness: 0.2 -1.6 mm Capacity: REF: 27 Ton / Zn 1.2 Ton = 1 Hour HMI Main Control Operation system Zn Coating Wf 80 gm – 220 gm (Both Side) Coil Out Diameter: 2.050 mm Line Speed Max: 150 m/min Entry Section: 195 m/min Process Section: Max. 150 m/min Exit Speed Max.: 195 m/min

COMPACTOR ROTATIV PENTRU CARTON, PLASTIC SI LAZI SAU CUTII DE CARTON Valpak ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS Valpak Brand/Marca TECHVAL Type/Model// Tip/Model VALPAK Putere/Power 4 kW Year of manufacture/an fabricatie 2003 Acustic pressure/nivel de zgomot 59 db (A) Supply voltage/alimentare 380 V triple phase Protection/protectie 16A curve D Sizes/Dimensiuni in cm Coil Weight – Al fins 140x210x280 cm (LxWxH) 1200 kg Amount in stock/pe stoc 1 pc/buc 1 sac rotund de deseu maruntit = 36 baxuri de carton necompactat 1 round bag of shredded waste = 36 containers of uncompressed cardboard 1 sac rotund de carton va avea 300/400 kg, de ladite 300 kg, plastic 200/300 kg 1 round cardboard bag will have 300/400 kg, of said boxes300 kg, plastic 200/300 kg Echipamentul standard are: Celulă fotoelectrică, sistem de debavurare automat, senzor op ...

Twin-shaft mixer Product no.: RE-HU-2014-0907-SF4 System: Used twin-shaft mixer Coil height: 230 mm Shaft diameter: 75 mm Trough height: 2 x 265 mm, total 530 mm Trough length: 3540 mm : Dimensions 4200 mm B 650 mm, drive 660 mm Engine: 4 x SEW, 3 kW, with Handwheel Material: stainless steel case Intake: 850 x 560 mm

Kneading spiral coil for Diosna spiral kneader Model: SP 80 D Stainless steel ready to ship! More kneading spirals on request!; Immediately available

Used reactor made of stainless steel with capacity 4500 liters. Coat - carbon steel. The reactor equipped with a stirrer and a coil made of stainless steel and the power of 11 kW motor with gear. No documentation. 2 pieces available. Weight approx. 4 tons

Kneading spiral coil for Kemper spiral kneader Model: SP 50 Stainless steel Ready to go! More kneading spirals on request! ; ready to ship

material width: 300 mm coil weight: 3 t material thickness: 2 - 4 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Working table: Length: 560 mm Width: 440 mm Max. dimensions of work piece: Length: 1130 mm Width: 510 mm Height: 260 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 318 mm Cross traverse (Y-axis): 218 mm Vertical travel (Z axis): 114 mm U axis: +/-48 mm V-axis: +/-48 mm U/V axis travel: 48 mm Taper-cut +/-: 30/65mm ° Diameter of electrode wire: from: 0.1 mm up to: 0.25 mm Forward feed for wire elctrode: from: 0.2 m/min up to: 15 m/min Max. coil weigth: 16 kg Dielectric aggregate: Empty weight: 4400 kg Contents: 240 l Generator: Cut capacity max. from: 300 mm2/min Voltage 50 Hz 3x: 380 Volt Total power required: 12 kVA Weight total installation approx.: 4500 kg Overall dimensions machine: Length: 3700 mm Width: 2600 mm Height: 2300 mm Variou ...

Perske 10DW 12/10 DA 12/2 Frequency converter Drive motor: Type: DA 12/2 8KW 400V 50 HZ S1 IP 54 Circuit: Triangle 2910 RPM Coil: 7.5 A 380 V excitation voltage excitation 50 HZ excitation frequency donation page: Type: 10DW 12/10 10 kVA power 35 A of output current 300 Hz output frequency output voltage of 165 V speed: 12000 U/1 18,000 U/1 G & 2768-M3520

Aseptic filtration system Mona. YOM 2008 Technical data: Capacity for concentrate: approx. 5.8 m3 / h (8000 kg / h). Plate filter area: approx. 55 m2. Control system: Simatic S7. The cooling capacity of device: 154 kW. Electric power connected: approx. 100 kW. Steam consumption: approx. 200 kg/h. Steam pressure: 2 Bar. The MONA system is used to improve the quality of the concentrate before loading. The quality is improved by pasteurization of the finished product with the possibility of its pre-treatment on a plate filter. The use of appropriate filter plates allows to reduce the turbidity of the juice and obtain better microbiological parameters by eliminating bacterial spores resistant to the temperatures used in pasteurization. Technical description of the device The device consists of the following elements: five-section plate exchanger, on which the temperature is  ...

219mm x 15mm Nanjing API Pipe Plant Year: 2021, Pipe Diameter: 101mm – 219mm, Wall Thickness: 2.75mm – 15mm, Pipe Length :4.2m – 16m, Yield Strength: 63.4Kg/cm2 (max), Line Speed: 10 – 30 meters per minute, Direction: Right to Left, Continuous Operation with Accumulator, Approximate Annual Production: 127,000 ton / year. Coil Car, Uncoiler, Straightener, Shear & Welder, Horizontal Accumulator, Forming Mill with Universal Drives, Individual Gear Boxes, 1,000Kw High Frequency Welder, Outside and Inside Bead Removal with Scrap Winder, Ultrasonic Tester, Cooling Section (Air and Water), Sizing Mill with Universal Drives, Individual Gear Boxes, Turk Heads, Flying Rotary Cut Off Saw, Run Out Conveyor, Straightening Machine, End Facing Machine, Automatic Packaging Line, Tooling, Spare Parts

Qty. 1 Second-hand strip rewinding machine Mfc.: IHI Built: 8/1968 Material to be rewonded: aluminium, aluminium alloys Foil thickness max.: 500 ?m Foil width max.: 1,150 mm / min. 800 mm Coil size max.: 1,950 mm (outside dia.) / 300 mm (inside dia.) Max. weight: 9,000 kg Speed: 150m/min.

3″ x .125″ Oto Mills – Someron HF Tube Mill Make (Entry Section): Oto Mills, Make (Forming & Sizing): Somenor, Maximum Pipe Diameter: 76mm, Wall Thickness: 0.8mm – 3mm, Shaft Diameter: 60mm Direction: Right to Left. Abbel Jib Crane, Mandrel Uncoiler, Weight Capacity: 10,000Lb, Powered Mandrel Expansion. Automatic Shear & End Welder, Hydraulic Shear, Automated Torching Head, Vertical Otto Mills Accumulator with DC Motor Drive, Driven Entry & Exit Guiding Rolls, Driven Entry Pinch Rolls, Adjustable Edge Guides, 5-Roll Coil Flattener. Forming Mill with Six Forming Stands, Seven Side Stands, Individual Gear Boxes, Universal Drive, Complete Set of Second Rafted Forming Stands, Motor: 60HP DC Drive. Welding Section with Emmedi 200Kw High Frequency Welder, 3-Roll Mechanical Squeeze Box, ID Scarfing Head, Powered Bead Re-Winder, Extended Cooling Section. Sizing Mill with Four (4) Sizi ...

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

76mm x 6mm Oto Mill HF Tube Mill Make: Oto Mill, Year New: 2005, Tube Diameter: 15mm – 76mm, Wall Thickness: 1mm – 6mm, Shaft Diameter: 100mm, Speed: 140 mpm, Direction :R-L. Double End Uncoiler with Coil Car, Crop Shear & TIG End Welder, Vertical Accumulator with 80Kw DC Drive, Forming Mill with Seven Forming Stands, and Seven Fin Passes, 110Kw DC Drive, and 70Kw DC Drive, Welding Section with 350Kw HF Thermatool Welder, Adjustable Sqeeze Box, Inside and Outside Scarfing Head, Bead Re-Winder, Cooling Section, Sizing Mill with Four Sizing Stands, and Four Fin Passed, Four Double Sided Turk Heads, 110Kw DC Motor, Friction Type Flying Cut-Off Saw with 74Kw DC Drive, Run Out Conveyor, and Table. Updated Electrics, LCD Display Controls, Hydraulics

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

Cable winding and unwinding system or winding coil ON 10 28 F and ON 10 28 E F, measuring unit M161, control Siemens

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Setting range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roll drive Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece glass 90 x 110 mm white 1 piece protective glass 90 x ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 280 K Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 40% ED at 280 amperes 60% ED at 230 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 105 kg Special accessories Display and wire automatic Age 6 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...

Qty. 2 Second-hand stainless steel tube production lines Stainless steel tube mill plant for production of dia. 48.6 mm x 3 mm - 2 lines Brand: Hyundai Precision Type: Tig welding type (DC 600 A) Built: 1994 Revamped: 2020 Roll stand a reducer (changing of bearing ) New welder New heat treatment system for NO 1 mill only! New conveyor & packing system New bead grinder (wheel type) for No 1 mill New electrical panel Mill speed: 3.5- 4 m/min Product pipe: Stainless steel pipe Structural pipe (ASTM A312, JUST 3459, KS D3576 (205/pressure pipe) Strip Width: 152.6 mm (max 170 mm) Thickness: Max 3 mm Pipe dimensions: Dia.: 12.7 - 48.6 mm Length: 6,000 mm Coil weight Max 2 tons Tools: (8 sets) 12.7 ømm 15.8 ømm 21.7 ømm 22.2 ømm 28.6 ømm 34 ømm 42.7 ømm 48.6 ømm

Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars

Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine  ...

Elec: 380 , Dimensions: 5500 (with coil)x1030, Height: 1600, Feed pitch (mm): 220, Width (mm): 190

Pastries line Fritsch Euroline P 235 Basic model version I Bandwidth 615 mm with dough coil holder Cutting station with cutting rollers with roller tray Dough collecting container Wrapping roller easy Dough scraper with guillotine with cutting length adjustment Stainless steel version 6000 mm long Connection 400V, 16A-CEE plug Machine

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 320 K Plant No. 118.362 Connection voltage 3 x 400 volts Setting range 25 - 320 amperes Switch-on time 40% ED at 300 amperes 60% ED at 270 amperes 100% ED at 240 amperes Current setting infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Design portable assembly system Wire feed gearbox 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Weight 32 kg Age 6 months Condition workshop-tested new incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 pie ...

Length: approx. 4.0 m, Diameter: approx. 200 mm E-drive closed transport coil

16 to. Krankatze, Kone, CXT, (chassis, rope, hook) – used - : Price from location: 12.500.-€ (net), dismantled and loaded! Not part of the sale are: bridge, remote control, coil hooks. Manafacture: Kone Year of construction: 2019 Reference number of the 200967176/10 Order number 4501376439 Electric wire rope hoist Electric hoist type CXT60410160SA5JDD0S Factory number of the e-train 58704433 Load capacity 16,000 kg Lifting height 10.5 m Drum pulling force - Unwindable rope length – Classification M5 Current consumption 68.2 A Total power 36.3 kW Lifting motor Lifting motor type MF13XL200N260FA5132X-IP55 Factory number 58202098 Power (kW) 35 kW Gearbox Type GEN410NB000-D Lifting speed 11.20/0.22 m/min Factory number 58664786 Rope speed -/- Scrutinies Operating voltage 400 V Frequency 50 Hz Control voltage 48 V Factory Number - Type of c ...

FRYER, TS TECHNIEK BV, MODEL: HOF-5000x600 Technical description: Serial number: 200939-00124 Power supply: 400 V, 3 Ph, 50 Hz, 3 kW Mesh widht: 600 mm - (Stainless steel) Dimensions: 5000 x 1800 x 2300 mm With internal heating coil

Year of manufacture: 2008, Machine No.: 670 - Working range X 300, Y 280, Z 250 mm - Feed speed 0.01 - 16,000 mm/min - Acceleration 8 m/s2 Resolution: 0.1 μm Position spread Ps: ±0.5 μm CNC precision dividing head (4th and 5th axis) - System 3R Macro Chuck - Brushless servo drive, fully digital - Feed speed C/B 7000 / 3000 °/min - Swivel range B from -10 to +120 degrees - Heidenhain iTNC 530 smarT.NC - High frequency coil HSK E25 500 -50'000 rpm - Tool changer 95-fold - Prepared for external workpiece changer - Minimum quantity lubrication -Suction - CO2 extinguishing system - Laser for tool measurement (Blum) - Infrared 3D probe - External dry cooler - External spindle cooling unit - External coolant device with cooling - Vorma machine light Accessories - Shrink device Haimer Power Clamp Nano - HSK E25 mounts (CORE) ø 2 - 6mm (Total 115 pcs; Shri ...

Belt coil batch mixer type PRB 300 in stainless steel 1.4306; Useful capacity 210 litres; Mixing tools welded to shaft as mixed paddle; Main drive with 4 kW at 66rpm; 1 inspection flaps on top of the mixer with safety lock; mixer suitable for food production; New storage machine

The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic. Technical parameters: - Maximum internal diameter of the sheet metal coil: 80 mm - Maximum length of the finished product: 3000 mm Technical data : - screen control panel: SIEMENS - maximum length of profiles: 3000 mm - maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm - automatic linear feed - optical sensor for automatic control of the correct length of the part - linear positioning of the hydraulic cylinder stroke - non-deformation perforation technology - the possibility of perforating profiles of various shapes - memory of perforation programs - two-sided perforation (in one operation) and one-sided perforation - automatic lubrication - maximum pressure of the hydraulic press in the line: 147 kN (15 tons) Tool accessories for the INTESO S3130 T punchin ...

Qty. 1 Second-hand strip casting production line Mfc.: EMA-Indutec, Marx, Air Blue, Güntner, Demag, G. Buchholz Built: 1992, 1995, 1997, 1999, 2000 Income material: Scrap Strip width: 300 mm Thickness: 10 – 20 mm – can be reduced! Plate length: 16 m can be extended! Coil weight: 1.5 T (steel) Scope of supply: Induction crucible furnace 20 kV Transfomer Cooling unit Casting machine Duo Mill Stand Coiler Run-out table Quenching Compressor

Magnet coil, electromagnet, pull magnet -Type: MSN1G-24V -Connection: 24 V DC 2.5 W. -Price: per piece -Number: 14x available -Minimum order: 3 pieces -Weight: 0.1 kg

Magnet coil, electromagnet, pull magnet -Type: MSFG-24/42-50/60-0D -Connection: 24 V DC 4.5 W. -Price: per piece -Number: 14x available -Minimum order: 3 pieces -Weight: 0.1 kg

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2800 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 30% ED at 280 amperes 60% ED at 210 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 80 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box, kpl ...

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Adjustment range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll of welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protecti ...