999 offers

Category: 1200: machines and plants for process engineering
New in: 1995
Price: request quote
Location: Land-kr KR 407-8 Seoul, Seoul South Korea
Seller: BMJ KOREA

1380mm x0.2mm Aluminium Cold/Hot Rolling mills Make:Korean Manufacturing Year:1995 Production Capacity:: 120,000Ton/year(Hot coil) Production Capacity: 70,000ton/year(Cold coil) 1. HOT ROLLING MILL Make:Poscon(Korean) Year:1995 Main Motor: 2,400?(D.C 600?×4set) Line Speed: 150m/min Material width(W)3,100? Rolling pressure: Max. 1,200Ton Product weight: Max. 5Ton Product size: Max. 1,380?W×6~10T Production Capacity:: 120,000Ton/y Type: Two-High Reversing Mill Work Roll Ass'y ×3set Roll : 1,050×1,500? D.C Motor 600?×4set Speed: ...

Category: 209: other wood working machines
New in: 1999
Price: request quote
Location: Land-be BE
Seller: Vebim

Edges: coil edges 0,4 - 3 mm Panel thickness: 6 - 45 mm Equipment: 1902 Edge magazine 1906 Holt melt unit with cartridges 1902 Lateral pressure rollers 1973 MF End trimming, motor 0,3 kW 1942M Multi-function top and bottom frims, motors 0,6 kW, tilting

Category: 106: presses
New in: 1995
Price: request quote
Location: Land-kr KR 407-8 Seoul, Seoul South Korea
Seller: BMJ KOREA

1380mm x0.2mm Aluminium Cold/Hot Rolling mills Make:Korean Manufacturing Year:1995 Production Capacity:: 120,000Ton/year(Hot coil) Production Capacity: 70,000ton/year(Cold coil) 1. HOT ROLLING MILL Make:Poscon(Korean) Year:1995 Main Motor: 2,400?(D.C 600?×4set) Line Speed: 150m/min Material width(W)3,100? Rolling pressure: Max. 1,200Ton Product weight: Max. 5Ton Product size: Max. 1,380?W×6~10T Production Capacity:: 120,000Ton/y Type: Two-High Reversing Mill Work Roll Ass'y ×3set Roll : 1,050×1,500? D.C Motor 600?×4set Speed: ...

Category: 209: other wood working machines
New in: 1999
Price: request quote
Location: Land-be BE
Seller: Vebim

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATI ...

Category: 1200: machines and plants for process engineering
New in: 1994
Price: request quote
Location: Land-kr KR 407-8 Seoul, Seoul South Korea
Seller: BMJ KOREA

Steel Strap(Wrapping Band)Production Plant Make: Korean Year:2013~1994 (Steel Band Product Specification) -Grade: APEX GRADE -Item: Standard or Hi-Tensile (Non heat) -Finish: Blue Paint Zinc -Thickness:0.38~1.27mm -Width:12.7/16/19/25.4/32mm -Tensile (kg/?) : Min 75 (Aim. 85) : Min 90 (Aim. 95) -Line Speed : 80/150mpm -Product Capa' : 2,000Ton/Month (General Specification) 1) Coil Thickness : 0.4 ~ 1.2mm 2) Coil Weight : Max. 7Ton 3) Coil Width : 260 ~ 520mm 4) Strands : Max. 16 Cutters 5) Line Speed : 80/150mpm 6) Product Capa' : 2,000Ton/Month (0.6t x 19mm x 16st x 80mpm x 500hr/Month) (Equipment list) 2-1. Slitting Parts 1 ...

Category: 209: other wood working machines
New in: 1996
Price: request quote
Location: Land-be BE
Seller: Vebim

Edge bander with manual operation and hot melt glue application for shaped panels Panel thickness: 10 to 40 mm Edge thickness: 0,5 - 1 mm Feed speed: ca. 4 m/min Only coil edges

Category: 107: sheet metal working
New in: 1996
Price: request quote
Location: Land-uk UK CV77S Berkswell, Home Farm, Unit 9, Meriden Road
Seller: Parkes Machine Tools Ltd

Atkin SP225-500 Combination Decoiler/Leveller, model SP225-500, year of mfg 1996. Single sided. Coil weight 500kg Material width 225mm Motor 1.1kW Touch probe loop control Approx. footprint 1.0m x 1.0m x 1.7m (LxWxH)

Category: 209: other wood working machines
New in: 2002
Price: request quote
Location: Land-be BE
Seller: Vebim

Calibrating and/or squaring line with edge banding doing panels all round in 2 passes Panel width min/max: 220 / 1000 mm Panel length min/max: 320 / 3200 mm Edges max. 3 x 45 mm. Fixed side at the left Siemens SMSPC controls Line set up: Vacuum feeder Turning station length to cross Double end tenoner Turning station length to cross Double squaring and edgebanding Turning station cross to length Vacuum stacker 1.01 FEEDER, type CAR MS 2000 2-lane 1.02 TURNING STATION LENGTH-CROSS, type TR 100 90° turning of workpieces by means of 2 clamping discs 1.03 DOUBLE END TENONER, type SI_V 112 - schéma 4500 Squaring panels or calibrating/shaping solid wood panels Panel feed by chains, chain width 8 ...

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: 2019
Price: request quote
Location: Land-de DE
Seller: Kauz Maschinenhandel GmbH

VACUUM DRYER MOLDRUP-SSV PLANT FOR DRYING WITH SUPERHEATED STEAM UNDER VACUUM Vacuum autoclave Diameter 2.300 mm Length 18.000 mm Wood volume: app. 10 - 12 m3 per charge (50 mm thickness) Working pressure: 0 - 1 bar (abs) Working temperature: 39 - 100 C Material: 6 mm AISI 304 stainless steel plate Wood pack size: max 1,20 m x 1,35 m x 11,00 m Wood sticks: min. 19 mm Door: 1 mechanical rapid closure door Complete with internal rails for the trolleys Insulated with 80 mm super-wool and covered by a 0,6 mm galvanized plate cladding. Ventilation system: 18 fans powered by 2 kW electric motors place in the side of the autoclave Ventilator diameter: 800 mm Capacity: 250.000 m3/h ...

Category: 209: other wood working machines
New in: 1996
Price: request quote
Location: Land-be BE
Seller: Vebim

Panel feed with chain, feed speed 8 and 16 m/min Top pressures with rollers Coil edges 0,3 to 3 mm, strips 0,3 to 13 mm. Edges up to 66 mm height Panel thickness 6 to 60 mm (limited to max. 45 mm for the end trims) Equipment: 1906 Glueing unit with hot melt cartridges 1901 Edge magazine with guillotine for coil edges 1926 Pressure rollers, pneum. loaded, 1 driven, 3 non-driven rollers 1916MF End trims, front and rear, motors 0,45 kW, straight and chamfer 1942 Top and bottom frims, motors 0,6 kW, tilting 1942M Multi-function top and bottom frims, motors 0,6 kW, tilting 1944 Buffing with oscillation Sound enclosure

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: Land-de DE 61381 FRIEDRICHSDORF, AM RINGELSBERG 8
Seller: MET-TECH GMBH

Qty. 1 Second-hand tinplate production plant This plant manufactured tinned or special chrome-plated ultra-fine sheet at the world's largest production site for packaging steel. With and without organic coating (such as paint, foil), the material is suitable for a wide variety of packaging solutions. Plate width: 450 - 1600 mm Length: 700 – 4300 mm Thickness: 0.3 – 3.0 mm Consist of: Pickling line Regenerating plant Reversing 4-Hi cold rolling mill Skin pass rolling mill Rewinder & Edging lines Bell furnaces Inert gas plants Electrolytic finishing plant Lead-tin coating line Cut-to-length line 1 Coil optimisation line 1 Slitter line Coil optimisation line 2

Category: 209: other wood working machines
New in: 2009
Price: request quote
Location: Land-be BE
Seller: Vebim

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 2 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Buffing Automation package straight/cha ...

Category: 107: sheet metal working
New in: 1988
Price: request quote
Location: Land-sk SK 91943 CIFER, Trnavska 15
Seller: FORMEX SK s.r.o.

Coil weight - maximum 1000 kg Coil diameter 1200 mm Clamping range - 320-520 mm Band width - 300 mm Band thickness 0.1 4 mm Beruhrungslose volume control Reel axis hohenverstelbarr 3-mounted reel shaft Central voltage via bevel gear drive power - 0,55 kW Weight 260 kg

Category: 209: other wood working machines
New in: 2013
Price: request quote
Location: Land-be BE
Seller: Vebim

Edges up to 3 mm from coil, 6 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm When Workpiece thickness23-40 mm, 120 mm When Workpiece thicknesse 41-60mm 150 mm in relation to workpiece length Feed speed 11 m/min Equipment: Pre-Milling 2 X 2,2 KW Pre-heating of panel edge Glue aggregate A6 Coil edge magazine Pressure zone, central positioning End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic setting central control Top & Bottom trimmng, 2 X 0,27 KW, automatic adjustment when switching from straight to angle Corner rounding unit 1 X 0,35 KW, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 11 m/min., min workpiece ...

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: Land-de DE 61381 FRIEDRICHSDORF, AM RINGELSBERG 8
Seller: MET-TECH GMBH

1 Qty. 13 Second-hand bell annealing furnaces Mfc.: Matthias Ludwig Type: HUGF185-320 Built: 1954 – 1965 Modernisation in 1967 Modification to H2 in 1990 2-4 Coils/Base No. of base: 26 Base relationship: 1 : 2.0 Annealing temp.: 620-700 °C Coil dia.: 1850 mm Max. stack height: 3200 mm 2 Qty. 13 Second-hand bell annealing furnaces Mfc.: Matthias Ludwig Type: HUGF185-390 Built: 1956 – 1988 Modernisation in 1970 Modification to H2 in 1990 2-4 Coils/Base No. of base: 30 Base relationship: 1 : 2.3 Annealing temp.: 620-700 °C Coil OD dia.: 1850 mm Max. stack height: 3900 mm 3 Qty. 5 Second-hand bell annealing furnaces Mfc.: LOI Type: HUGF 185-420 HPH Built: 1987 No. of bas ...

Category: 107: sheet metal working
New in: 1997
Price: used machinery auction RESALE 1.600 €
Location: Land-de DE Germany, 76316 Malsch
Seller: Surplex GmbH

Weight approx.: 1800 kg Dimensions (l x w x h) approx.: 0 x 0 x 0 mm Description: - Machine no.: 7203 - Strip width: 400 mm - Coil weight max.: 3 t - Coil outer diameter: 1500 mm - Expanding range: 370 - 430 mm - Load capacity: 3000 kg Description/Special accessories: - Hydraulic spreading - Hydraulic pressure roller with adjustable pressure - Ultrasonic tape scanning

Category: 107: sheet metal working
New in: 2018
Price: request quote
Location: Land-gr GR
Seller: PROFIT Machinery Point Ltd

STOCK NUMBER : 13120 Machine: Rollforming line for profiles Manufacturer : Hebei Yufa Tile Press Equipment Co. Ltd Location : Greece Condition : NEW MACHINE NEVER WORKED WARRANTY IS VALID Secification Raw material Type : GI Steel Thickness : 0.6MM Yield strength: 240Mpa TO 350Mpa De-coilerOperation Manual Weight capacity 6tons Main body Roller station 15roller stations Diameter of shaft 55mm Material of shaft 45#steel with 0.05mm chrome Material of rollers 45#steel with 0.05mm chrome Chain 1 inch Middle plate thickness 16mm Frame 120mm C-Beam Cutter Blade MaterialGCR12 steel Operation Automatic hydraulic type power Voltage 380V/50HZ,3 phase Main motor 4KW  ...

Category: 701: basic foodstuffs and animal feeds machines
New in: used
Price: used machinery auction RESALE 1.500 €
Location: Land-uk UK Units 1-6, Mountain Farm Marsh Road, Hamstreet TN26 2JD Ashford, Kent
Seller: Industrial Auctions BV

Searle roof condenser, model: MGB222-AL-12, serial number: 432124, 400 V, 3 Ph, 50 Hz, 340/190 W, 27 bar, medium: HCFC & HFC, coil volume: 59 liter, 4 fans, 496 kg, 4 fans, dimensions: 3100 mm x 2300 mm x 1250 mm, with 2 Searle evaporators, (2x) model: KME175-6AL-4, 380/415 V, 3 Ph, 6590/7840 W, 21 bar, medium: HCFC & HFC (2), coil volume: 21.6 liter, 214 kg, 4 fans each, dimensions: (2x) 2750 mm x 600 mm x 600 mm.

Category: 2500: miscellaneous
New in: 1988
Price: request quote
Location: Land-nl NL 7461A Rijssen, Nijverheidsstraat 6
Seller: Voortman Machines

Coilge weight: 2,500 kg Coildiameter outside max. : 1,400 mm Coildiameter internal min.-max. : 450-550 mm Coil width max. : 250 mm Board thickness: 0.5-2 mm Band width: 80-250 mm Number of indicative roles: 5 + 7 STS. Diameter of the rollers: 60 mm Roll-off-target speed: variable 5-30 m/min. Band output height: 1,250 mm The connection capacity: 4.5 kW Machine dimension Wxdxh: 2.70 x 1.40 x 1.80 m Size of the control console: 0.60 x 0.50 x 1.00 m Weight of the machine ca.: 1,600 kg

Category: 106: presses
New in: 1989
Price: request quote
Location: Barcelona
Seller: ProdEq Trading GmbH

PRESS DESIGN: - drive system: eccentric / crank: - frame design: H-frame, monoblock: - openings in uprights: yes: - number of suspensions: 1 - number of slide actions: 1 - table cushion: no: - opening in table: yes: - feedstock transport direction: right to left: PRESS FORCES: - total force (nominal): 250 to PRESS TABLE: - table surface (left-right): 1500 mm - table surface (front-back): 900 mm - thickness of bolster plate: 130 mm - height above floor level: 1030 mm - opening in bed (left-right): 450 mm - opening in bed (front-back): 300 mm - number of T-slots: 7 - distance between T-slots: 150 mm SLIDE: - table surface (left-right): 1100 mm - ta ...

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

Production line-Special production line for production aluminum corner profiles for plasterboard Material: Strip thickness of 0.25-0.40 mm Products: 20 x 20 mm drywall 23 x 23 mm small + big hole Possible production length: From 2.2 m to 3.5 m without further adjustment Line speed: 50 m / s

Category: 207: gluespreader machines
New in: 2007
Price: request quote
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Edge banding machine with modern zero-joint technology for standard edge materials with functional layer Single sided edge banding machine Brand: Homag Type: Optimat KAL 310/8/A20/S2 Year: 2007 Stop on the left hand side With workpiece return Technical data: - Feed 18 m/min - Working height 950 mm - Working width min.: 55mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm (depending on the workpiece length) - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge material coil 0,3-3 mm - Edge cross sectional area max. at PVC 135 mm², at veneer 100 mm² - Coil-Ø max. 830 mm Transport chain 80 m wide with rubbered top Top pressure with v-belt ...

Category: 107: sheet metal working
New in: 1998
Price: request quote
Location: Land-de DE 04838 Eilenburg, Walther-Rathenau-Str. 24
Seller: ZOMA Maschinenhandel

Combined stamping/lateral part/slitting line for the manufacture of perforated sheets, used    combined punching / cut to length / slitting / perforating line for sheets, used consists of: (1) double upright eccentric punch press, used double column excentric stamping press, used, type / type: PZKWL 125x1200S/HK year / year of make: 1998 manufacturer / make: Paul Müller GmbH Pressing power / rated pressure: 125 t Table / table: 1150 mm x 820 mm Table width: 1200 mm Band thickness / thickn. of-band: max. 2 mm RAM / ram size: 1000 x 680 mm Stroke / stroke: 50 mm Plunger strokes in idle /. number of strokes at idle operation: ...

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 500 €
Location: Land-es ES Spain, 48903 BARAKALDO
Seller: Surplex GmbH

Weight approx.: 500 kg Dimensions (l x w x h) approx.: 1500 x 700 x 1250 mm Description: Coil width: 254 mm. Sheet thickness: 1,5 mm. Max coil dia: 1000 mm.

Category: 109: other metal working machines
New in: 2000
Price: request quote
Location: Land-cz CZ 60200 Brno, Janska 12
Seller: AMARON s.r.o.

Recommended speed: max. 36 m / min Electric motor voltage: 3 x 380V / 50Hz Motor power: 5 kW Cylinder diameter: 60 mm Dimensions of the cabinet: 1100 x 500 x 1600 mm Machine dimensions : 1000 x 1300 x 1500 mm Machine weight: 830 kg

Category: 106: presses
New in: 1975
Price: request quote
Location: Spain, La Pobla dC
Seller: ProdEq Trading GmbH

pressure: 320 t plate thickness: 12 mm no of strokes: 40 Hub/min --------------------------------------------------: PRESS DESIGN: - drive system: knuckle-joint: SLIDE: - total force (nominal): 320 to - stroke: 63 mm - stroke rate (min.): 10 /min - stroke rate (max.): 40 /min V-RING: - nominal force: 100 to COUNTER RAM: - nominal force: 80 to TOOL DIMENSIONS: - lower table - width: 630 mm - lower table - depth: 630 mm - upper table - width: 640 mm - upper table - depth: 640 mm - shut height max.: 355 mm - distance between columns (H-frame): 800 mm - passline opening (free passage in side columns): 360 mm STRIP-FEEDER: - feeder type: roll feeder: - sheet w ...

Category: 106: presses
New in: used
Price: request quote
Location: Land-de DE
Seller: Silicon plus

High speed press: Producer: Mabu Stroke power 500 KN (50 Tons) Year 09/98 / Beckhoff control 2017 Machine in mint condition with new Beckhoff control Made in Germany Stroke adjustment (hub): 7-60 mm Strokes per minute 80-500 spm Four pillar Table dimension is 740 x 565 mm. Side passage width 330 mm. Including two servo feeders: Zehnder & Sommer EV 12 AK (2 stk.) Including two SOPREM Decoiler and recoiler Weight cca. 4 ton Motor 5.5 KW On stock more high speed presses Bruderer.

Category: 106: presses
New in: 2008
Price: request quote
Location: Spain
Seller: ProdEq Trading GmbH

pressure: 50 t no of strokes: Hub/min sheet width: mm --------------------------------------------------: PRESS DESIGN: - drive system: knuckle-joint: - frame design: H-frame, monoblock: PRESS FORCES: - total force (nominal): 50 to PRESS TABLE: - table surface (left-right): 940 mm - table surface (front-back): 650 mm SLIDE: - table surface (left-right): 830 mm - table surface (front-back): 420 mm SLIDE (MECHAN. PRESS): - stroke min.: 16 mm - stroke max.: 51 mm - stroke rate (min.): 100 /min - stroke rate (max.): 1120 /min ATTACHMENTS (PRESSES): - decoiler: yes: - leveller unit: yes: - strip feeder: yes: - safety guard / safety door: yes: - nois ...

Category: 106: presses
New in: 1974
Price: 32.000 €
Location: Land-de DE
Seller: Silicon plus

Type: Haulick & Roos RV80 Capacity: 80 tons SPM: 65 to 400 Stroke adjustment: 10 - 80 Table size: 600 x 635 mm Year of construction: 1974 Servo feeder: Alba Wuppertal VHY300 / 0.1 Max. Bandwidth: 300mm Max. Band thickness: 3.0mm incl. greasing device and reservoir Year of construction: 09/1983 Straightening machine: Dreher / Dimeco-Besancon Working width: 300mm Decoiler: Dreher / Dimeco-Besancon Type: 2350DM Model: 531 Year of construction: 09/1978 Weight cca 12.400 kg Beside this press we have plenty of Bruderer BSTA high speed presses.

Category: 106: presses
New in: 1997
Price: request quote
Location: Spain
Seller: ProdEq Trading GmbH

PRESS DESIGN: - drive system: knuckle-joint: - frame design: H-frame, monoblock: - openings in uprights: yes: - number of slide actions: 1 - table cushion: no: - quick die change system: no: PRESS FORCES: - total force (nominal): 50 to PRESS TABLE: - table surface (left-right): 940 mm - table surface (front-back): 650 mm SLIDE: - slide force: 50 to - table surface (left-right): 810 mm - table surface (front-back): 420 mm - stroke rate (max.): 1100 /min SLIDE (MECHAN. PRESS): - stroke min.: 16 mm - stroke max.: 51 mm - stroke rate (min.): 100 /min - stroke rate (max.): 1100 /min - main drive power: 22 kW ATTACHMENTS (PRESSES): - decoiler: yes:  ...

Category: 107: sheet metal working
New in: 2011
Price: request quote
Location: Land-de DE 61352 Bad Homburg, Spessartstr. 40
Seller: tuerer machinery brokers & consulting

REF.-No. 00544 Designation of the plant press brake includes tools Manufacturer EHT Model EHT VarioPress 170 30 Year 2011 Type VarioPress 170 30 Year 2011 Force 1700kN Working width max. 3050mm Power 18.5 KW Net weight 13600kg Distance between the machine stands 2550 mm CNC crowning device in the table fast chip device for upper tools and sub-tools or assistants enclosure with safety plc side and rear shield with access door two vodere movable Edition consoles 2 coil spring flaps stops Rückwertiger stop - 5 Axes (X-R-Z1-Z2-X 1) electric control panel safety device laser save matrix move infinitely Beleutung for back-order workspace documentation and operating inst ...

Category: 106: presses
New in: 1998
Price: request quote
Location: Spain
Seller: ProdEq Trading GmbH

PRESS DESIGN: - drive system: knuckle-joint: - frame design: H-frame, monoblock: PRESS FORCES: - total force (nominal): 50 to PRESS TABLE: - table surface (left-right): 940 mm - table surface (front-back): 650 mm SLIDE: - table surface (left-right): 810 mm - table surface (front-back): 420 mm SLIDE (MECHAN. PRESS): - stroke min.: 16 mm - stroke max.: 51 mm - stroke rate (min.): 100 /min - stroke rate (max.): 1120 /min ATTACHMENTS (PRESSES): - decoiler: yes: - leveller unit: yes: - strip feeder: yes: - safety guard / safety door: yes: - noise protection cabin: yes: See video https://youtu.be/BJ8PDnIl7cc

Category: 1300: other machines and plants
New in: 2002
Price: request quote
Location: Land-bg BG 1000 Sofia, Vitosha Blv 25
Seller: PROFIT Machinery Point Ltd

Stock Nr 13101 Manufacturer Gietart, Holland Machine Shot blasting and Painting machine Y.O.M. 2002 Conditiopn Very Good Location Greece Raw material: steel Coil Specification thickness Min 5,0 mm Max 50,00 mm Coil width Max 2000 mm Coil weight Max 10 tns Total power supply 125 kw Color installation blue (ral 5010) / yellow (ral 1007) Line Description Inlet Roller conveyor Height = 850 mm Length = 17000 mm Shot blasting unit Throwing wheel number = 6 Throwing wheel motor each = 11kw Width = 2000mm height = 300 mm filter unit blasting production speed for plates = 3 m/min blasting production speed for profiles = 2 m/min Painting unit Maker= INTEC Spray guns = 4 Filter unit  ...

Category: 209: other wood working machines
New in: 2005
Price: used machinery auction RESALE 440 €
Location: Land-es ES Spain, 28890 Loeches - Madrid
Seller: Surplex GmbH

Weight approx.: 90 kg Dimensions (l x w x h) approx.: 950 x 660 x 1150 mm Description: ? Pneumatic Assembly Machine, Frame jointing machine ? Serial number 370B ? Moulding width min-max: 4-120 mm ? Moulding height min-max: 5-70 mm ? Pneumatic supplying: 6 Bar ? Actuating by pedal ? It is included 3 staples coils of type 12 NR

Category: 107: sheet metal working
New in: 1996
Price: request quote
Location: Land-bg BG 1000 Sofia, Vitosha Blv 25
Seller: PROFIT Machinery Point Ltd

Description Straightening and Cut to length machine Manufacturer OCEVI, Italy Manufactured 1994 Stock list Nr 1396 Condition Very good Power (kW) 405.66 LENGTH(m) 42.5 Max. Width (m): 9.26 Application THICKNESS RANGE(mm): 2 up to 14 LENGTH RANGE(mm): up to 14000 COIL WIDTH(mm): 175 up to 1800 Material Material HOT ROLLED FLAT STEEL QUALITY: S235JR & S355J2 ac. to EN 10025:2004 COLD ROLLED FLAT STEEL HOT/COLD DIPPED GALVANISED FLAT STEEL QUALITY: Z100,Z140 & Z350 HOT ROLLED FLAT STEEL WITH SURFACE PATTERN(CHEQUERED & TEAR-DROP) QUALITY: S235JR & S355J2 ac. to EN 10025:2004

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: 2005
Price: used machinery auction RESALE 9.500 €
Location: Land-es ES Spain, 28890 Loeches - Madrid
Seller: Surplex GmbH

Weight approx.: 4000 kg Dimensions (l x w x h) approx.: 11200 x 2525 x 3500 mm Description: ? Automatic packaging machine, wrapping machine for stretchable film ? Serial number 2274-2275 ? Minimum workpiece length 300 mm ? Maximum workpiece dimensions 1400 x 600 mm (width x height) ? Adjustable feed speed from 0 up to 14 m/min ? Parts of the machine: <, br>, ? 1 - CMB TCEC-15/30 motorized belt conveyor, length 3000 mm, useful width 2 x 675 mm, motor power 0.37 kw ? 2 - Cold cutting ang jointing station with magazine for packaging material coils (air bubble plastic coils, paperboard, etc), maximum passage width 1400 mm, maximum passage height 600 mm, maximum coil length 1600 mm, maximum c ...

Category: 107: sheet metal working
New in: 2003
Price: request quote
Location: Land-gr GR
Seller: PROFIT Machinery Point Ltd

Stock Nr 1399 Manufacturer Fromach SRL, Italy Machine Rollforming line for Tile Y.O.M. 2003 Condition On production very good condition Location Greece Line direction Left to right Raw material Prepainted coil Min thickness 0.35 mm Max thickness 0.8 mm Max width 1250 mm Max weight of coil 12 tons Line length 24,5 meters Units of the line : Decoiler with coil car capacity 12 tons Bench for rollforming, with motor, supporting 4 cassettes Each cassette has 4 passages, X 4 cassettes, total 16 passages Complete electric plan Console board with electronic programming Set up for "Tile profile" (see attachment) Press complete with die Hydraulic shearing machine for cutting the profile D ...

Category: 107: sheet metal working
New in: 2005
Price: used machinery auction RESALE 61.000 €
Location: Land-ro RO Romania, 800701 Galati
Seller: Surplex GmbH

Weight approx.: 10000 kg plate width: 500 mm plate thickness: 0,3 - 0,6 mm stations: 16 Dimensions (l x w x h) approx.: 25000 x 2500 x 1800 mm bending speed: 60 m/min total power requirement: 66 kW Description: used PIEMME SAS Italy / PME Roll-forming Profiling Machine Technical Specifications: ? useful width 500 mm ? unwinding drum capacity maximum 2000 kg ? production speed with head & tail punching 60 m/min ? production speed with continuous punching 30 m/min ? material galvanized Products: UD 30, UW 50 x 30 ? 40, UW 75 x 30 ? 40, UW 100 x 30 ? 40, CW 50,CW 75,CW 100,CD 60L 25 ? internal Ø coil 500 mm ? line direction right to left ? colour Blue Ral 5015 Equipment Description:  ...

Category: 107: sheet metal working
New in: 1989
Price: request quote
Location: Land-DE Germany, 58119 Hagen
Seller: Reinhold Schmitt GmbH

material Cold rolled steel, pickled, galvanized material width 450 - 1.100 mm material thickness 0,40 - 3,00 mm coil weight 15 t coil inside diameter 508 mm coil outside diameter 1.800 mm Breaking point max. 500 N / mm² yield point 170 - 370 N / mm² sheet length 390 - 4.000 mm sheet width 450 - 1.100 mm infeed speed 20 m / min. Working speed max. 130 m / min. package weight max. 4,000 kg package height including pallet max. 500 mm length tolerance ± 0.25 mm working direction left - right line consisting of: coil car hydraulically capacity 15,0 t decoiler capacity 15,0 t press roll transfer table leveler number leveling rolls 23 leveling roll diameter 36 mm materia ...

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 100 €
Location: Land-es ES Spain, 28890 Loeches - Madrid
Seller: Surplex GmbH

Weight approx.: 20 kg Dimensions (l x w x h) approx.: 580 x 950 x 2300 mm Description: ? Trolley with strip coil holder ? With TECNA hoist, capacity 4 kg ? For more details see the photos

Category: 107: sheet metal working
New in: 1986
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Bandwidth up to approx. 160 mm - thickness approx. 0.8-1.5 mm -7 set rolls 40 mm -3 x dial indicator fine adjustment - outlet rollers 60 mm -Roll length 160 mm -Recommended speed infinitely adjustable -Infeed roller conveyor -Limit switch for Coilabwickler / reel - powered 400 V / 1,1 kW -Space B H 1100 x 1450 x D 700 mm -Weight 400 kg

Category: 207: gluespreader machines
New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Semi automatic edge bander\r\nMake: VITAP\r\nType: FUSION\r\nNew machine\r\n\r\nTechnical datas:\r\n- For shaped concave, convex and stright panels 10-60 mm (edging)\r\nthickness 1-3 mm band thickness\r\n\r\nTefloned gluing station, kg1\r\n- Quick disassembly system\r\n- Glue and tape application on big and small shaped panels\r\n- Equipped with glue pot with 1 Kg capacity\r\n- 2 rollers to copy the shape of the piece\r\n-1 tilting support roller to enable the exit of the panel after banding\r\n- Glue application amount is adjusted via a knob\r\n- Set up of the glue temperature\r\n- Automatic guillotine for coiled material up to 3 mm x 45 mm\r\n\r\nThree kind of works:\r\n-Encoder\r\n-Encode ...

Category: 706: beverage machines
New in: 1999
Price: 33.000 €
Location: Land-de DE
Seller: Hümmer GmbH

- 2 Fermenting tanks, make Schulz, with each 40 hl total content, in stainless steel, standing on 4 feet, coolable with halfpipe coil, with automatic temperature control, manway, cleaning pipe, sight glass, sampler, ladder hanger, built 1999 - Ice water tank with cooling aggregate and pump Total price: 33.000 €, ex location

Category: 2455: semi-trailers/tippers
New in: 2004
Price: 16.900 €
Location: Land-de DE
Seller: Gassmann GmbH

; Gross weight [kg]: 35000; Transmission: Sonstige; Front tyre size: 385 / 65 R 22,5; Rear tyre size: 385 / 65 R 22,5; Accessories: ABS; Colour: Silber; Cargo space dimensions [LxBxH]: 9000x2350x1900; Max payload [kg]: 27610

Category: 203: planing machines
New in: 1993
Price: request quote
Location: Land-at AT 3241 Kirnberg an der Mank, Am Holzweg 9
Seller: HZB-Maschinenhandel Maschinenteufel

Planing width: 265 mm Planing height: 165 mm Dressing table length: 2000 mm + 1000 mm number of spindles: 7 pieces 1. spindle: down/below 7.5 kW 2. spindle: right/right 7.5 kW 3. spindle: left/left with right shaft 4. spindle: top/top 5,5 kW 5. spindle: top/top 5,5 kW 6 spindle: right/top 5,5 kW 7 spindle: Universal 5,5 kW Forward speed: 4-25 m / min Item description: Minimum workpiece length: 380 mm Planing width min.: 22 mm Depth of 10 mm The Planer shaft speed: 6000 RPM Cutting flight circle (4Messer) diameter: 125 mm The vertical shafts are driven by a common 5.5 kW motor Plane waves: TERSA patent, solid steel Centralized control panel with 2-axis positioning control 1 ...

Category: 106: presses
New in: 1971
Price: request quote
Location: Valencia/Spain
Seller: ProdEq Trading GmbH

PRESS DESIGN: - drive system: eccentric / crank: PRESS FORCES: - total force (nominal): 125 to PRESS TABLE: - table surface (left-right): 1000 mm - table surface (front-back): 800 mm SLIDE: - table surface (left-right): 880 mm - table surface (front-back): 710 mm SLIDE (MECHAN. PRESS): - slide adjustment: 100 mm - stroke min.: 20 mm - stroke max.: 125 mm - stroke rate (min.): 40 /min - stroke rate (max.): 140 /min TOOL ASSEMBLY DIMENSIONS: - shut height (stroke down, adjustment up), BDC: 450 mm OVERALL SPECIFICATIONS (COIL LINES): - sheet width max: 400 mm - sheet thickness max: 2 mm LEVELLER UNIT: - number of leveller rolls: 7 This machine has a coil feed line ...

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-DE Germany, 58119 Hagen
Seller: Reinhold Schmitt GmbH

material width 650 mm material thickness 0,30 - 2,50 mm coil weight max 5,0 to. coil inside diameter 480 - 520 mm coil outside Diameter 1.500 mm speed V = 20 m / min. line consisting of: coil car under floor decoiler capacity 5,0 to. expanding range 480 - 520 mm mandrel length 650 mm expanding hydraulically brake system disc brake - pneumatically driving / leveling unit no. - driving rolls 2 no. - leveling rolls 5 leveler no. - leveling rolls 17 leveling roll diameter app. 47 mm no. - supports 6 (3 x above / 3 x below) no. - back up rolls 57 back up roll diameter 95 mm height adjustment electromotive tilting adjustment manually support adjustment manually cutting sh ...

Category: 207: gluespreader machines
New in: 2019
Price: request quote
Location: Land-de DE Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

New semi automatic contour edge bander\r\nBrand: Vitap\r\nType: Eclipse PRO\r\n\r\n- For shaped concave, convex and straight panels 10-60 mm thickness, 1-3 mm band thickness\r\n\r\nGluing station\r\n- Glue and tape application on big and small shaped panels\r\n- Equipped with glue pot with 1 Kg capacity\r\n- Quick assembly system\r\n- 2 rollers to copy the shape of the piece\r\n-1 tilting support roller to enable the exit of the panel after banding\r\n- Glue application amount is adjusted via a knob\r\n- Set up of the glue temperature\r\n- Automatic guillotine for coiled material up to 3 mm x 45 mm\r\n\r\nThree kind of works:\r\n-Encoder\r\n-Encoder + laser\r\n-Encoder to overtake the board  ...

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: 2016
Price: 10.900 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Aspirator suction unit, clean air dust extractors, clean air extraction, mobile dust extractors with additional pressure shock cleaning and unloading automatic Suction connection 250 mm, right Drive motor 5, 5kW 400V with star-Delta starting Max flow 4400 m ³/h Nominal volume flow 3534 m³/h Filter area 32 sqm, filter BGIA (AWN16) Wood dust approved, residual dust class 3, H3, 0. 1 mg / m ³ Automatic pneumatic Filterabruettlung and additional pressure shock cleaning system, PLC controlled via pressure tank, directly into the filter hoses, this very good cleaning also very fine dusts Mobile 4 stable chip collecting cans, mobile, a total of 660 litres Delete automatic with ABC fi ...

Category: 502: presses
New in: 2005
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Typ HBC 110 Year of construction 2005 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 3,15 cbm Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 75 kW Tying system 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight 850 up to 1.400 kg Hydralicoil 1,200 L Baler dimensions built up with hopper approx.11,750 x 2,250 x 6,690 mm (l x w x h) Transport dimensions only baler approx.11,750 x 2,250 x 3,150 mm ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)