coil used for sale

Previous use: distilled water Capacity: 100 L/H Material: glass Year: 1993 The unit includes : Level regulator Electrical control box Frame Pump Coil heat exchanger (1.2 bar max) Electric tank heater 5000W 200 litre glass tank Tubular exchanger (1.2 bar max) Photoelectric level Boiling chamber Stainless steel coil boiler: stainless steel 316 (1.2/1.5 bar max)

Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Transport dimension: Ø60 x 290 mm -Weight: 0.4 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Transport dimension: Ø65 x 365 mm -Weight: 0.5 kg

Control module, compact control, fan coil control, electronic module -Manufacturer: Meitav-tec, Universal Fan Coil Control -Type: MIGA1-FC-SUPER -Operating voltage: 230 volts -Dimensions cardboard: 170/90/H45 mm -Weight: 0.5 kg

Stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Danfoss, solenoid valve coil -Type: BB230CS 018F6193 -Voltage: 230 V/10 W -Price: per piece -Number: 3 piece -Dimension box: 75/65/H55 mm -Weight: 0.3 kg

Stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Danfoss, solenoid valve coil -Type: BB230AS -Voltage: 230 V/10 W -Price: per piece -Number: 8 piece -Dimension box: 70/45/H95 mm -Weight: 0.3 kg/piece

Stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Danfoss, solenoid valve coil unused in original packaging -Type: BB230AS -Voltage: 230 V/10 W -Price: per piece -Number: 21 piece -Dimension box: 65/55/H75 mm -Weight: 0.3 kg/piece

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, single and multi-color point recorder -Manufacturer: Jumo, single and multi-color dot pens -Type: PS1d-44/4.um.fp/D92.160/161 -Dimensions: 265/145/H145 mm -Weight: 3 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving coil instruments, moving coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, combined measuring device with data logger, anemometer, wind transmitter, wind speed sensor -Manufacturer: Thies, Windgeber 4.3350.10.000 -Measuring range: 0.3 to 75 m/s -Price: per piece -Number: 3 pieces -Dimensions: 200/210/H290 mm -Weight: 0.4 kg/piece

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device -with: measuring and control technology type M19 -Measuring range: 20 - 600 °C -Connections: 6 -Dimensions: 545/285/H350 mm -Weight: 21 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type No .: 6.618962.4 -Display range: 0 V - 500 V -Installation dimensions: LxWxD approx. 66x138x165 mm -Dimensions: 72/144/H165 mm -Weight: 1.3 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 50 A - 300 A -Installation dimensions: LxWxD approx. 66x138x165 mm -Dimensions: 72/144/H165 mm -Weight: 0.7 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type no.: 4205 1021/1 -Display range: 0 V - 40 V -Installation dimensions: LxWxD approx. 140x140x90 mm -Dimensions: 144/144/H90 mm -Weight: 1.2 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x80 mm -Dimensions: 144/144/H80 mm -Weight: 0.7 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x103 mm -Dimensions: 144/144/H103 mm -Weight: 0.8 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x93 mm -Dimensions: 144/144/H93 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 V - 250 V. -Installation dimensions: LxWxD approx. 66x138x230 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H230 mm -Weight: 1.4 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 150 A -Installation dimensions: LxWxD approx. 66x138x175 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H175 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x175 mm -6 V 10 mA -Dimensions: 72/144/H175 mm -Weight: 1.5 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 75 A -Installation dimensions: LxWxD approx. 66x138x170 mm -Number: 2x available -Price: per piece -Dimensions: 72/144/H170 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 200 A -AC -Installation dimensions: LxWxD approx. 66x138x165 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H165 mm -Weight: 0.7 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Type: 1.660711.2 -Display range: 0 °C - 600 °C -Installation dimensions: LxWxD approx. 66x138x165 mm -Dimensions: 72/144/H165 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type: No. 6.620086.4 -Display range: 200 V - 240 V -Installation dimensions: LxWxD approx. 66x138x165 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H165 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Type: No. 6.660713.2 -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x192 mm -6 V 39 mA -Dimensions: 72/144/H192 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x192 mm -6 V -Number: 2x available -Price: per piece -Dimensions: 72/144/H192 mm -Weight: 1 kg

sheet width: 0600 mm coil outside dia.: 1500 mm weight max. in kg: 4000 kg width of sheet max. ca.: 3,60 mm sheet thickness - min.: 0,80 mm diam. of the rolls ca.: 80 mm nomb. of straightening rolls: 7 feed rolls: 2 speed: 5-30 m/min range of expansion ca.: 475-535 mm expansion: hydraulisch pinch roll: hydraulisch total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler type MS 4000 - Hydraulic spreading - Hydraulic pressure roller from above - Swivel-in limit roller at the front, contact disc at the rear - Auxiliary drive - Reel movable - Coil lifting table Straightening machine type MR 58 Rollers hardened and ground. - Pneumatically ventilated feed roller - Straightening rollers adjustable as a block - Lateral belt guidance at the inlet - Hydraulic band insertion aid - Straightening head can be opened - Large roll basket and transfer table at t ...

- Year of manufacture: 1989 - Start-up: 1991 o Decoiler - max coil width: 1.500 mm - max coil weight: 4 t - speed: 12 m/min o Straightening drive and hydraulic shears - min cut length: 100 mm - max cut length: 2.000 mm - Additional: paper insertion for protection - Suitable for cutting: paper, cardboard, aluminium thickness up to 0,5 mm, zinc thickness up to 0,6 mm, tinplate 0,6 mm o Sorting and transport table o 2× Stacking table: 4 t - line length: 20 m - line width: 5 m - without electronics control device - partly operational

MAZZONI LB toilet block production line. New 2007. The line consists of : 1. mixer PS-256.1 2. screw conveyor T-255.1 3. extruder PL-258.1 4. cutting device (twin-bladed slicer) PX 258.1 5. cutting machine (tracked single-feed slicer) PX 256.1 6. additional production line equipped with bag dust collector FW-PARTNER-2200/N 7. additional belt conveyor for transport of difficult raw material . 8. single-coil forming head. 9. double-coil forming head. 10. COREMA thermoregulator.

Line consists out of: 1 - Double head decoiler: - cap: 25 ton - max length of coil: 2 meter - max diameter of coil: 3 meter 2 - Pre-leveller/straightening + edge slitting unit - 2 slitting heads are movable to slit the edges of the sheet - variable from 400 to 2000 mm wide 3 - Ungerer leveller/straightening unit - 6 + 7 rolls - for fine levelling/straightening - max thickness: 4 mm 4 - Schröder shear - max cap: 2050 mm - max thickness: 4 mm 5 - feed-out table + sheet storage Workwidth x sheetthickness: 2050 x 4 mm Straightner: yes Shear: yes

Line consists out of: 1 - Tensol ASB 6 ton decoiler - max coil length: 1500 mm 2 - Straightening unit - 4 + 3 rolls - cap: 2 mm 3 - Slitting unit - 4 slitting heads - max length: 1500 mm - cap: 2 mm 4 - Shear: - max length: 1500 mm - cap: 2 mm nbsp; Max sheetwidth: 1500 mm Sheetstrip thickness : 2 mm Max weight coil: 6 ton

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally refurbished in 2020 Fill capa ...

sheet width - max.: 350 mm coil weight: 1 t coil internal dia.: 360 - 475 mm weight of the machine ca.: 1 t dimensions of the machine ca.: BxTxH 1500x1500x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 350 mm coil weight: 1 t coil internal dia.: 360-475 mm weight of the machine ca.: 500 kg dimensions of the machine ca.: BxTxH 1500x1500x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Relays, with reed contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RG03 PL - No.: 737 000 206 TGL 26047 Coil resistance: 2700 Ohm coil: 403.601-1/8.06 1 Reed contact IP40 New !br /br /IP40br /br /New ! Dimensions: 80 x 80 x 30 mm

Inv. Num. : 7265 Type: R11-SA-1600 X3 Producer: JORNS AG Created: 1996 Parameters: Maximum coil weight: 13000 kg Maximum coil inner diameter: 508/610 mm Minimum width in roll: 100 mm Maximum width in roll: 1500 mm Maximum sheet thickness (stainless steel): 1-2 mm Maximum sheet thickness (aluminum): 0.8-3 mm Maximum thickness of cut sheet (black steel): 0.8-3 mm Maximum sheet thickness (galvanized): 0.4-3 mm

General SKU079G409 LocationBarneveld MakeChaudronnerie Tuyauterie Rhone-Alsace Feyzin No.845 Year of construction1996 Pressure Working pressure6 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4539 (904L) Stainless Steel Reactors Reactor(1x) Capacity11.000 Ltr Vessel sizesdia. 2400x1500mm Conical bottom(1500mm) Dished top sidecheck Manholedia. 500mm Top connections3x dia. 250mm Outletdia. 150mm Half coil jacketed(335 Ltr), Half coil in Duplex (1.4462) Max. temperature160 Degr. C. With paddle stirrercheck Motor15,0 KW, 220/380 Volt (Ex) Speed mixing shaftvariable Information Floorspace2,7x2,7 M Total height5,5 M ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmaceuticsRubberLubricants & ...

General SKU016G073 LocationBarneveld MakeJackson Apparatenbouw N.V. Mouscron No.91-082 Year of construction1991 Pressure Working pressure0.5 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume21450 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity21.450 Ltr (useful capacity 18.000 Ltr) Vessel sizesdia. 2800x2685mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm Top connections3x dia. 80mm + 2x dia. 100mm Outletdia. 125mm Half coil jacketedcheck Max. temperature200/350 Degr. C. (vessel/half coil) With paddle stirrermake Fluid, type FKL-80 Motor7,5 KW, 380/660 Volt (Ex) Speed mixing shaft± 44 Rpm Stainless Steel Reactors MaterialStainless steel 1.4301 (304) Information Floorspace3,3x3,3 M Total height6,5 M ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgroche ...

General SKU356S847 LocationBarneveld MakeEnco Energie Componenten GmbH (AT) Type509 ltr No.8317/1 Year of construction1996 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume509 Ltr. Motor0.55 KW Pressure6 Bar Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck Capacity509 Ltr. Vessel sizesdia.800 x900mm Dished bottomcheck Dished top sidecheck ManholeHand hole DN200 Top connectionsDN125, DN100, (3x)DN80, DN50 OutletDN80 Half coil jacketed(64 lLtr.) Max. temperature-29/160 Degr.C, With propellor stirrercheck Motor0.55 kW 230/400 volt (Ex) Speed mixing shaft356 Rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Notified body(Tuv) Capacity509 Ltr Vessel sizesdia.800 x900mm Dished bottomcheck With covercheck ManholeD ...

Double-head linear labeling machine, with container separator, clamp centering and upper accompanying band. Conveyor belt 2000mm long and 90mm useful belt width. Production: 4000 units/h RUSAN dispensing heads type SARU SR-200/50 Max coil: Ø 330mm Max label height: 200mm Min label height: 15mm Long. Minimum label: 15mm Coil core: Ø 40/76mm Overall dimensions: 2500 x 1300 x h1980mm Weight: 700kg Installed power: 1.5kW 380V III; 50Hz DOCUMENTATION AVAILABLE

horizontal euro 600 ba flowpack machine, used for packaging masks for a very short time. Equipped with 3 servomotors, conveyor carriage with pushers, 2 pairs of wheels for longitudinal sealing, unwinder with mechanical brake, rotary clamp for horizontal sealing, output belt with independent motorization. three stamps. feeding belt 1,600 mm./ max. width coil 600 mm./ coil diam. 350 mm./ length min.-max. bag 40-1,000 mm. / electrical characteristics 380v, 50 hz. Fixed forming tunnel variable in heights for packaging.

Two (2) aluminium roll forming production lines for the production of spacer bars for double glazing. - Dimension of machines: 18-20m length and 4m width - Dimension of welding unit and cooler: 4m length and 2m width - Min. and max. speed: from 90m/min up to 170m/min - Energy power from 76kwatt up to 120kwatt Each line consists of the following parts: 1) Decoiler 2) Base machine 3) Welding unit EMMEDI 4) Cooling unit 5) Degreasing unit 6) Electronic flying shear 7) Exit Bench The groups of rollers available per type of product are as follows: For the production of bendable spacers with height 6,5mm: 5,5 8,5 9,5 11,5 14,5 15,5 19,5 Number of groups: 7 Number of auxiliary groups 7 For the production of normal (not bendable) spacers with height 6.5mm: 5,5 6,5 7,5 8,5 9,5 11,5 13,5 14,5 15,5 17,5 19,5 Number of groups: 6 Number of auxiliary groups 3 The alumi ...

sheet width: 0320 mm coil outside dia.: 1650 mm weight max. in kg: 2000 kg width of the decoiler: 400 mm coil inside-diam. ca.: 350 - 460 mm diam. of the rolls ca.: 40 mm nomb. of straightening rolls: 7 sheet thickness - max.: 2,00 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m COVEMA-SCHWABE belt system consisting of: Reel MHM 2 - hydraulic expansion (motor 1.5kW/1500 U) - hydraulic pressure roller - with drive Feed leveling machine VRMA 32/96 The straightening head can be opened using hydraulics Intermediate ventilation with operating instructions with control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A prototype machine for cutting, dressing and cooling fruit, e.g. apples, pears. For example, apples and pears are cut into 8 or 12 segments with manual guillotines (2 pieces). The fruit falls into the bathtub, EQUIPPED with a glycol cooling system (coil installed), the belt speed can be changed, and 2 guillotines can work in the bathtub at the same time. Capacity up to 900kg/h, speed regulation. Built-in coil - Possibility to connect a cooling agent. Built-in circulation pump. The cut fruit falls onto a conveyor belt, which transports the cut fruit to the washing and cooling water, where it is removed from the liquid on a second belt. Minimum soaking time 3 minutes. Additionally, a temperature controller (Danfos programmer) is installed. Year of production 2015. 100% efficient with a VERY EFFICIENT cooling system. The guillotines are German devices manufactured by FEU ...

sheet width: 150 mm coil weight: t coil internal dia.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 150 mm coil weight: t coil internal dia.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

coil internal diameter: 500 mm, coil external diameter: 1,500 mm, weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,600 x 1,700 mm

sheet width: 300 mm coil weight: 1,5 t coil internal dia.: 400 - 500 mm : je Arm 670 mm total power requirement: kW weight of the machine ca.: 760 kg dimensions of the machine ca.: T 1,23 x B 1,7 x H 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions search coil opening (WxH): 650 mm x 150 mm, Metal-free zone on both sides of the search coil: 75 mm, Inlet length to the metal-free zone: 1,200 mm, Conveyor dimensions (LxW): 2,200 mm x 600 mm, Transport height: 800 mm +/- 50 mm, height adjustable feet, Conveyor belt speed: 25 m/min (adjustable via frequency converter), Conveyor Type: Intralox 1100 Flush Grid - BLUE, Running direction: standing in front of the control panel: from right to left, Degree of protection: IP66, Ejection system: Stop if metal is found with an acoustic signal

band width: . mm coil weight: . t coil external diameter: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: AMBROGIO GALLI 40 GAMMA Eccentric Press Line Includes : - n.1 AMBROGIO GALLI 40 GAMMA Eccentric Press Pressure 40 TON Min/max stroke 9/100 mm No. of strokes 80/210 Motor power 2/6 HP Table size 750x450 mm Press size 1500x1500x2900 mm - ISOTEC soundproof cabin Dimensions 1900x1800x3100 mm - n.1 ELMEA decoiler Model SC18A71 production year 1972 Maximum coil size 300 mm Reel holder size 1600x1000x1600 - ELMEA decoiler Model MS10A production year 1997 maximum coil size 300 mm Reel holder size 1500x1300x1600 - Exit conveyor - Electrical panels for press - Protective grills NOT INCLUDED IN THE ITEM NOT INCLUDED : - N.2 feeders for eccentric press - N.1 control/vision for feeders , - No. 1 BRANKAMP process control system - N. 1 packaging exit conveyor weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 4,500 x 3,500 mm