coil used for sale

sheet width: 0150 mm coil weight: 2 x 0,50 t coil internal dia.: 250 - 650 mm coil outside - diam. ca.: 1600 mm 0: 1-10 U/min engine output: 2 x 0,75 kW, insgesamt 2 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was only in operation for a short time The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0150 mm coil weight: 2 x 0,50 t coil internal dia.: 250 - 650 mm coil inside-diam. ca.: 1600 mm 0: 1 - 10 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Spreading manually via hand crank - Separate control panel - Drive infinitely variable via SEW motors and converters - Rear contact washer, front limiting ring - Loop control via ultrasonic transmitter loops Side guide including loop tensioning switch - Reel can be moved transversely +/- 50mm via ratchet - 4 protective bars for securing the coil Machine was never in production - it is like a new one ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maker: Muhong Material Width: 500mm - 20000mm Material Thickness: 8mm - 20mm Coil Weight: 35 ton Coil ID: 410mm - 650mm Coil OD: 1800mm Direction: Right to Left Entry Coil Car Hydraulic Lift and Traverse V-Type Floor Standing Design Double Mandrel Uncoiler Powered Hold Down Roll Sliding Base Pneumatic Brake Sliding Base Feed Up Motor Drive Hydraulic Peeler Driven Pinch Rolls 5-Rolls Straightener Adjustable Work Rolls Work Rolls Diameter: 300mm Motor: 132Kw DC Drive Driven Exit Conveyor 9-Rolls Straightener Adjustable Work Rolls Work Rolls Diameter: 230mm Motor: 200Kw DC Drive Driven Exit Conveyor Hydraulic Shear Entry Entry Pinch Rolls Self Contained Hydraulics Exit Driven Conveyor Drop Type Stacking System Electrics, Hydraulics, Controls

sheet width: 0600 mm coil weight: 2 x 1,50 t coil internal dia.: 370 - 630 mm coil outside - diam. ca.: 1560 mm 0: 12 U/min power capacity: 1,1 kW total power requirement: kW weight of the machine ca.: 1,55 t dimensions of the machine ca.: 2,60 x 1,20 x 1,90 m double decoiler with motor, manual expansion, coil loop control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: mm coil weight: 4 t coil internal dia.: mm material width: 300 mm material thickness: 0,4 - 2,0 mm total power requirement: 8,5 kW weight of the machine ca.: t dimensions of the machine ca.: m Conveyor system consisting of: ALBA decoiler EHA-4-300 and elec.-hydr. Leveler RMS EM 2/6-120/45-300 B, year of manufacture 99 coiler: bundle weight 4000 kg, coil inside diameter 460-620 mm, External coil diameter 1600, dimensions 1500x1140x2300 mm, weight approx. 2000kg Straightening machine: feed rollers number 2 - diameter 120 mm, straightening rollers number 6 - diameter 45 mm, center distance 80 mm, take-off speed 5-20 m/ min, Deduction height above floor 1500 mm, dimensions 1100x740x1800 mm, weightapprox. 600 kg ARKU roll feed, Servomaster 300, year 94 passage width 300 mm, roller diameter 100 mm, max. cross-section 1000 mm², Material thickness 0.1-5mm, feed accuracy better than ...

Cut to length line Herr-Voss/Cincinnati 2400mm x 8mm x 25t (A3780) Material Width: 700mm – 24000mm Material Thickness: 2mm – 8mm Coil Weight: 25 ton Coil ID: 410mm – 650mm Coil OD: 1800mm Direction: L-R Entry Coil Car Hydraulic Lift and Traverse V-Type Floor Standing Design Double Mandrel Uncoiler Powered Hold Down Roll Sliding Base Pneumatic Brake Sliding Base Feed Up Motor Drive Hydraulic Peeler Driven Pinch Rolls 4-Hi Corrective Leveler Nine (9) Work Rolls Work Rolls Diameter: 225mm Motor: 75Kw DC Drive Driven Exit Conveyor 4-Hi Corrective Leveler Eleven (11) Work Rolls Adjustable Work Rolls Work Rolls Diameter: 112mm Motor: 200Kw DC Drive Driven Exit Conveyor Mechanical Shear Entry Pinch Rolls Air Clutch and Brake Exit Driven Conveyor Drop Type Stacker Sheet Length: 1000mm – 7000mm Driven Exit and End Conveyors Electrics,  ...

sheet width - max.: 0300/450 mm coil weight: 2,00 t coil internal dia.: 360 - 410 mm coil outside - diam. ca.: 1000 mm expansion: mechanisch brake: mechanisch total power requirement: 1,10 kW weight of the machine ca.: 0,530 t dimensions of the machine ca.: 1,40 x 1,00 x 1,40 m - with coil application arms, sheet metal width 300 mm - without front collar contact arms, sheet metal width 450 mm - Jaw length 450 mm - Belt running direction left-right - Bane loop control via dancer roller (start/stop) - Hand crank - 6 arms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Working width: 125 - 1500 mm System consisting of, -Height-adjustable coil trolley -Decoiler type HYD DEC-5-1500 -Stretching / Feed through unit -Length cutting unit -Length measuring device -Cutting shears type BKR 1600-2-S -Positioning device -Punching unit with 20 punches -Profiling unit -Double mini press brake -Outfeed roller conveyors -Sheet vacuum lifter with stacking station plate cut-off length: 6,300 mm, strip width: 125 - 1500 mm, coil internal diameter: 500 mm, coil external diameter: 1,000 mm, coil weight: max 5000 kg, weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 50,000 x 3,000 x 3,000 mm

Single sided edge banding machine Brand: IMA Type: COMPACT PC-6220 F Year: 2000 Left hand machine Workpiece transport via a driven transport chain and adjustable top pressure Beckhoff control Need of space LxWxH mm: 7400x1500x2000mm Weight: approx. 3600kg Technical data: Edge material: a) Veneer/coil and strip ware, b) PVC/coil and strip ware c) Solid wood strips min. edge height = approx. 14 mm max. edge height = approx. 55 mm min. edge tickness = approx. 0,4 mm max. edge thickness = approx. 20 mm min. panel thickness = approx. 10 mm min. panel thickness = approx. 16 mm at use of the multi function unit max. panel thickness = approx. 50 mm min. panel width = appprox . 60 mm min. panel length = approx. 150 mm max. strips = approx. 20x50 mm Panel supernatant from the chain conveyor = approx. 35 mm Pneumatic connection: approx. 7 - 8 bar The basic  ...

PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   feedstock transport direction: right to left PRESS FORCES   total force (nominal): 315 to   nominal work capacity: 45 kNm PRESS TABLE   table surface (left-right): 2250 mm   table surface (front-back): 1100 mm   thickness of bolster plate: 150 mm   height above floor level: 1000 mm SLIDE   slide force: 315 to   table surface (left-right): 2250 mm   table surface (front-back): 880 mm   stroke: 210 mm   stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke rate (min.): 25 /min   stroke rate (max.): 80 /min   main drive power: 60 kW SLIDE EJECTOR / CUSHION   working principle: pneumatical  & ...

CONTROLS   PLC SIEMENS FEEDSTOCK STEEL STRIP   sheet width max.: 450 mm   sheet width min.: 90 mm   sheet thickness max.: 13 mm   sheet thickness min.: 2 mm   exterior coil diameter max.: 1900 mm   exterior coil diameter min.: 1100 mm   internal coil diameter max.: 760 mm   internal coil diameter min.: 610 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 30 mm   external diameter max.: 140 mm   wall thickness min.: 2 mm   wall thickness max.: 12 mm   length min.: 4000 mm   lenght max.: 10000 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling   speed max.: 65 m/min   feedstock transport direction: left to right Line consis ...

material width:450 mm material thickness:1,0 - 14,0 mm coil weight:10,0 t coil internal diameter:470 - 520 mm coil external diameter:1100 - 2000 mm no. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mm number of draw-in rolls:2 inlet roll diameter:160 mm min. material width:100 mm speed:15 m/min power requirement:75,0 kW weight of decoiler:6,4 t weight of straightening machine:12,8 t dimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mm straightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

Qty. 1 Second-hand continuous galvanising line Mfc.: POSCO Built: 1997 Capacity: approx. 100 000 per annum Strip width: 720 – 1250 mm Thickness: 0.2 – 1.6 mm De-Coiler ID 508 mm OD 2000 mm Weight: 20 Tons Finished product: Coil Strip width: 720-1250 mm Thickness: 0.2-1.6 mm ID 508 mm OD 1600 mm Weight: 10 Tons Sheet Strip width: 720-1250 mm Thickness: 0.2-1.6 mm Weight: 3 Tons Line speed Entry section: max. 150 m/min. Process section: max. 120 m/min. Exit section: Coiling max. 150 m/min. Shearing max. 100 m/min. Threading speed: 20 m/min. Coating method Both sides coating, Regular spangle Coating weight 120-500 g/m² based on both sides Post treatment Chromating Electricity High voltage 10 kV Low voltage 380 V AC, 3 ph., 50 Hz, 220 V AC, 1 ph. Water Pressure min. 3 kg/cm² Steam Pressure min. 5 kg/cm² Temperature min. 158 °C Production process Coil s ...

Mobile vacuum station for use on a degassing opening on the extruder or tool as well as for support in vacuum profile forming - a water ring vacuum pump VG-55 mounted on a welded and painted steel base frame with maximum vacuum Volume of 55m3/h, with kpl. connected supply and cooling system - Vacuum connection: 1x connection pipe with internal thread R1" or GEKA coupling and hydraulic hose 2TE DN25 length 700mm - a VA service water separator and storage tank with fresh water connection R1/2", level switch and drain tap for easier daily cleanse - a cooling coil built into the separation tank and removable cooling coil made of hde-ribbed tube - Water drain on water tank: R1 1/4" - Cooling water connection to cooling coil: R3/8" - an additional vacuum separation container made of steel (hot-dip galvanized) in front of a vacuum pump for separation (diffusion) of the  ...

Loading capacity: max. 300 Kg. Coil outsite diam.: max. 1.000 mm Coil inside diam. 240 - 560 mm Coil width: max. 180 mm; good

Loading capacity: max. 2.000 mm Coil Inside diam. max. 1.000 mm Coil Outside diam. max. 1.200 mm Coil width: max. 500 mm

Capacity: 12 t Table length: 2000 mm Table width: 0 mm Stroke: 2000 mm CNC Brand: _Unknown / Other CNC Model: Leonard en Bauer MAKE   ARKU Germany TYPE    VRM 200/7/2000 + AH 1200/2000/MSG-4Q YEAR   1990 SPECIFICATIONS Controll   Leonard + Bauer Throat     2000 mm Maximum sheet thickness Steel   6,3 mm DIMENSIONS Length   6000 mm Width     4500 mm Height    3000 mm ARKU De-Coil & Straightener 2000 x 6,3 mm   Make           : ARKU Germany Typ              : VRM 200 / 7 / 2000 Serial No    : WO 1576 Age              : 1989 in Work 1990  ARKU Precision s ...

Single Slab Reheat Furnace • Type: Walking Beam • Manufacturer: Davy • Capacity: 150 t/h • Inside Refractory Width: 8,35 m • Effective Length: 32,6 m • Slab Thickness: 160 mm • Slab Maximum Length: 7,5 m • Primary Fuel: mixed BFG and COG • Alternate Fuel: N°6 Fuel Oil • Commissioned in 1995 Water Descalers • Primary descaler at slab reheat furnace run out table • Front and back 3 Hi Rougher Mill descalers. • Finishing Mill descaler at run-in table. Water Descaling Pumps • Manufacturer: Union Pump Company • N° of Pumps: Two (one operating, one stand by.) • Power: 5.000 HP (3.730 kW) • Pump Speed: 4.500 rpm • Discharge Pressure: 127 barg (1.840 psig) Rougher Mill • Type: 3 Hi, one stand 22" x 34" x 100" Reversing Mill • Manufactured by Blaw-Knox in 1923. • Ma ...

Carrying ability: max. 2,000 kg. Coil Inner Drm. max. 1,000 mm Coil Outdoor Drm. max. 1,200 mm Coil Width: max. 500 mm; ready for use

Loading capacity: max. 2.000 Kg. Coil Inside diam. max. 1.000 mm Coil Outside diam. max. 1.200 mm Coil width: max. 500 mm; ready for operation

Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.

Material width: 0300 mm Coil weight: 0.5 t Coil inner diameter: 270-360 mm Coil outside diameter: 1000 mm Speed: m/min Weight: 0,4 t JAWS: 200 mm extension of the diameter

STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...

Qty. 1 Second-hand double stand cold rolling mill stand Mfc.: SMS/Germany Type: 4-Hi Double Stand Cold Rolling Mill Built: 2009 Stopped: 2017 Capacity: 800,000 Ton/Year Annual running: 6480 h Strip width: 800 – 1650 mm Thickness entry: 1.8~5.0 mm Exit: 0.3 – 2.5 mm Coil OD: 1000~2200 mm Coil ID: 610 mm Coil Weight: Max. 30 T Line Speed: max. 1350 m/min Threading Speed: 30 m/min

Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request

Qty. 1 Second-hand 4-Hi reversing rolling mill – Electrical equipment and cooling unit are not included! Mfc.: MINO Type: 4-Hi Reversing Mill LLQ500 Built: 1970 Revamped: 2011 by MINO Strip width: 420 mm Thickness: 0.2 – 4.0 mm Speed: 20 – 400 m/min. Coil weight: 8.0 T Coil: ID 500 mm Coil OD: 1800 mm Rolled material: Carbon steel (can be used for other applications too)

The PV-350 LSHIX machine is a wrapper equipped with a film coil at the bottom of the machine, so it is especially recommended for wrapping irregular or difficult to drag products. This family adds to the robustness, ease of use and reliability characteristic of ULMA machines, great versatility and flexibility in format changes, as well as a wide range of versions, ensuring a perfect adaptation of the machine to the baling needs of each application. The great flexibility and proven reliability of these wrappers make them a family with a wide implementation in the food market in general, and especially valued in sectors such as agriculture, meat, dairy, etc ... Machine built in stainless steel and materials protected with anticorrosive treatment. Right-to-left work direction. Cross welding with clamp with horizontal grooves. Longitudinal welding system using 3 pairs of rollers  ...

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

Maximum coil width: 250mm Maximum thickness: 3mm Maximum coil diameter: 1200mm Maximum coil weight: 1400kg Maximum feeding speed: 0 - 30 mtrs/min. Power: Three-phase 380V Accessory for eccentric presses.

Max. coil diameter: 2000mm, max. coil width: 1500mm, max. coil weight: 5t, max. tensile force: 550kg, winding speed: 0-20m/min, connected load: 4kW, with pressure roller system and documentation, suitable for the production of stainless steel pipes, an inspection is possible.

USED STAINLESS STEEL 18.500 LITRES TANK WITH AGITATION AND INNER COIL REF.: C6286 Stainless steel vertical tank with a capacity of 18,500 liters with agitation and internal coil. Top Klopper head with central stirring flange, manhole, sight glass and flage nozzle. Klopper bottom with bottom discharge and interior coil. On 4 brackets. General characteristics: Material Stainless steel Technical characteristics: Capacity 18.500 litros totales Bottom type Klopper Type of agitation Impeller Serpentine + On 4 brackets Man hole x1 Peepholes x1 Rompecorrientes X4 Vessel outside diameter 2.200 mm Vessel height 4.400 mm Vessel height + funds 7.700 mm Motor characteristics: Power 15 kW - 20 cv Rotational speed 1500 rpm Reducer characteristics: Rotational speed 160 rpm

USED AGUILAR Y SALAS STAINLESS STEEL 11.500 LITRES TANK WITH AGITATION AND INNER COIL REF.: C9216 Vertical tank made of 304 stainless steel by AGUILAR Y SALAS with a capacity of 11,500 liters. With double height propeller agitation and internal coil at the bottom. On barckets. General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel 304 Year built 1986 BODY COIL Design pressure atm 10 bar Design temperature 90 ºC 190 ºC Test pressure estanco 18.7 bar Volume 11.500 l 12 l Weight 1500 kg 30 kg Technical characteristics: Capacity 11.500 l Serpentine 12 l On Brackets Vessel outside diameter 2000 mm Vessel thickness 4 mm Vessel height 3500 mm Vessel height + funds 4320 mm Thickness top bottom 4 mm Bottom bottom thickness 5 mm Motor characteristics: Rotational speed 1390 rpm Reducer characteristics: Ratio 1-29 Rotati ...

material width:320 mm coil weight:2,6 t material thickness:0,5 - 2,0 mm coil internal diameter:400 - 510 mm coil external diameter:1200 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 band speed:0 - 30 m/min power capacity:1,5 kW weight:1,5 t

USED STAINLESS STEEL 304 30.000 LITRES APQ TANK WITH INTERNAL COIL REF.: C9033 Vertical tank made of 304 stainless steel by NIPRO with a capacity of 30,000 liters. Heat-insulated body and bottoms, with a 13.5-liter internal coil on the lower bottom. General characteristics: Manufactured by NIPRO Material Stainless steel 304 Year built 1987 Weight 2.700 kg BODY COIL Design pressure atm 4 bar Design temperature 40 ºC 90 ºC Working temperature atm 4 bar Volume 30.000 l 13.5 l Weight 2.700 kg 15 kg Technical characteristics: Capacity 30.000 l Bottom type Flat Serpentine + Insulated + Man hole + Vessel outside diameter 2400 mm Vessel height 6600 mm Vessel height + funds 7000 mm

material width:300 mm coil weight:0,5 t material thickness:0,4 - 3,0 mm coil internal diameter:420 - 520 mm coil external diameter:1200 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:50 mm power requirement:1,5 kW weight:1,55 t dimensions (WxDxH):2,5 x 1,2 x 1,8 m

sheet width: 620 mm coil weight: - t coil internal dia.: 280 mm coil external diameter: 1720 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

60″ x .105″ x 20000Lb Strilich – Voss Cut to length line Make: Strilich – Voss Material Width: 12″ – 60″ Material Thickness: .020″ – .105″ Weight Capacity: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry 3-Arm Turnstile Powered Rotation ID Protective Bars Entry L-Type Coil Car Powered Lift & Traverse Self Contained Hydraulics Push Botton Controls Mandrel Uncoiler Powered Mandrel Expansion Powered Hold-Down Roll Sliding Base Feed-Up Motor Water Cooled Brake

material width: 1200 mm coil weight: 10 t material thickness: 8 mm internal diameter: 500 mm coil outside dia.: 1300 mm coil: Schleicher straightening device: Schleicher feed motor: Schleicher total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

60″ x .067″ Iowa Precision Multi – Blanking Line Make: Iowa Precision Serial # ES68615 Material Width: 6″ – 64″ Material Thickness: .009″ – .067″ Coil ID: 18″-28″ Coil OD: 72″ Sheet Length: 10″ – 144″ Tolerance: =-1/32 Slitting Head Six (6) Cuts, with Edge Trim Coil Straightener with Adjustable Work Rolls Mechanical Drive Pneumatic Flying Shear Lift Table Stacker with Driven Roll Conveyor Electrics, Controls, Tooling

52″ x .187″ x 30,000Lbs Braner Slitting Line Make: Braner Material Width: 12″ – 54″ Material Thickness: .010″ – .187″ Weight Capacity: 30,000Lbs Coil ID: 20″ Coil OD: 72″ Entry 3-Arm Turnstile Entry L-Type Coil Car Mandrel Uncoiler with Hold – Down Roll Hydraulic Peeler Edge Guides Electric Edge Control Three (3) Slitting Heads with 7″ Arbor Diameter Adjustable Arbors DC Motor Drive Two (2) Scrap Winder Pit Cross Over Table Combo Type Tension Stand with Water Cooled Brake Recoiler with Over-Arm Separator 125HP Recoiler Motor CMC Solid State Drive 4-Arm Exit Turnstile

60″ x .135″ x 40,000Lbs Yoder Slitting Line Material Width: 12″ – 60″ Material Thickness: .010″ – .135″ Weight Capacity: 40,000Lbs Coil ID: 20″-24″ Coil OD: 72″ Pull Through Design Entry Coil Car Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Slitting Head with Gear Box and AC Feed-Up Motor Single Scrap Winder Recoiler with Over-Arm Separator DC Motor Drive Exit Turnstile Electrics, Hydraulics, Controls

32mm x 2mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2002 Tube Diameter 10mm – 32mm Wall Thickness: 0.7mm – 2mm Speed: 180 mpm Direction: R-L Coil Weight: 3 ton Entry Coil Car Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 50Kw Motor & Drive Finn Passes with 35Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 50Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

50mm x 4mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2003 Tube Diameter, 12.7mm – 51mm Wall Thickness: 0.8mm – 4mm Speed: 160 mpm Direction: L-R Coil Weight: 5 ton Entry Coil Car Double Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 70Kw Motor & Drive Finn Passes with 45Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 70Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

63mm x 3mm Oto Mills HF Tube Mill Make: Oto Mills, Model: 552, Tube Diameter: 10mm – 63.5mm, Material Thickness: 0.8mm – 3.2mm, Line Direction: Left to Right. 10,000Lb Double End Uncoiler & Coil Car, Automatic Coil Joiner, Vertical Accumulator, Coil Straightener, Forming, Fins, Sizing Sections, 70mm Shaft Diameter, Three (3) 100HP Motors and Drives, Coolant Section, 30Kw Thermatool HF Welder, Three (3) Turk Heads, Spare Rafted Stands, Run Out and End Tables, Tooling

76mm x 6mm Oto Mills HF Tube Mill Year New: 2005, Tube Diameter, 12mm – 76mm, Wall Thickness: 1mm – 6mm, Speed: 140 mpm , Direction: L-R, Coil Weight: 10 ton. Entry Coil Car, Double Mandrel Uncoiler, Automatic End Joiner, Vertical Accumulator, Coil Straightener, Forming Mill with 110Kw Motor & Drive, Finn Passes with 70Kw Motor and Drive, 300Kw Thermatool HF Welder, Cooling Section, Sizing Mill with 110Kw Motor & Drive, Turk Head Stands, Flying Cut-Off Saw, Run Out Conveyor and End Table, Tooling for Round and Profiles, Electrics, Hydraulics, Controls

Oto mills 127mm x 5mm HF Tube Mill with Packaging Line Make: Oto Mills Year New: 2000 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Material Strength: 360 – 510 MPa Tooling: 17 sets, Round, Square, Rectangular Entry Coil Car Floor Standing V-Type Design Powered Traverse & Lift Mandrel Uncoiler Powered Expansion Powered Hold – Down Roll Sliding Base Feed-Up Motor Shear & End Welder TIG Power Supply Mechanical Shear Driven Pinch Rolls Coil Straightening Machine Horizontal Accumulator Entry & Exit Pinch Rolls Coil Feeding Unit Variable Speed Drive Forming Mill Shaft Diameter: 80mm Eight (8) Forming Stands Seven (7) Side Forming Stands Horizontal & Vertical Stand Adjustment Individual Gear Boxes Universal Drive Variable Speed DC Motor Drive 300Kw High Frequency Welder 3-Roll Adj ...

Loopco Loop Slitting Line 60 x 0.125 x 40,000Lb (A3755) Make: Loopco Material Width: 12″ – 60″ Material Thickness: .010″ – .125″ Coil Weight: 40,000Lb Coil ID: 20″ Coil OD: 72″ Speed: 1200 feet per minute Mandrel Uncoiler Powered Hold Down Roll Powered Expansion Water Cooled Brake AC Feed Up Motor Sliding Base Hydraulic Peeling Table Adjustable Edge Guides Driven Pinch Rolls Three (3) Slitting Heads Arbor Diameter: 5″ Crane Removable Design Keyless and Shimless Tooling Adjustable Arbors 100HP DC Motor Drive Pit Cross Over Table Rotary & Drag Board Tension Stand DC Motor Drive Coated Tension Rolls Strip Separating Bar with Tooling Recoiler Powered Over-Arm Separator Hydraulic Push – Off Powered Gripper 125HP DC Motor Drive Exit 2-Arm Turnstile Powered Rotation ID Protective Arms Electrics, Hydraulics, Controls, Tooling, ...

Bandwidth.. 870 mm Band thickness 0.2-3.0 mm Coil weight 10 to. Coil ID Unwinder... 400/508/750 mm Coil ADBewinder.. 1,500 mm Cutting performance. 110 N/mm2 Velocity 120 m/min.

It consists of the double elevator as you see in the photo, double weigher, bagger. It is in very good condition. The encoder you have puts only date and batch. The price includes start-up in your facilities and transport. It has 3 forming tubes: for coil of 600 mm (bag approx 285 mm), another of coil 475 mm (Bag width 222 mm) and another of width coil 300 mm (Width of bag 135 mm).