coil used for sale

Edge magazine IMA - 6x - 24x fold magazine - 550 or 800 mm coil diameter Several versions available from stock. Price on request.

Gluing unit IMA complete with double coil magazine, glue application device and pressure zone

Horizontal flow pack machine. This Flow Pack packaging machine consists main machine, coil unwinding group, conveyor belts for loading and unloading the products and control panel.

degree: 1150 working heigth: 200 mm length: 1000 mm width: 800 mm depth: 1400 mm Coil Weight per Base: 300 kg Base Diameter: mm Stack height: 0 mm No. – Furnace: 0 No. – Base: 0 No. – Cooling Hood: 0 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 260 mm stroke: 10-100 mm ram adjustment: 80 mm table surface area: 700x500 mm ram surface: 450x300 mm table-regulation: 400 mm coil: Schwabe GSW type: MHM 2 total power requirement: kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t no. of strokes: 30-70 Hub/min Max ram stroke: 130 mm ram adjustment: 100 mm table surface area: 950x630 mm ram surface: 630x600 mm throat: 340 mm dayligth: 480 mm coil: GSW total power requirement: kW weight of the machine ca.: 8,9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 300 mm material thickness: 3 mm cross cut: weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5, 1, 1 m Coil Shredder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 12,5 t stroke: 5,5 mm clamping width: 5 mm Height: . m total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The crane includes brackets and guide rails 60m Coil device not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.

Max. coil weight: 10t, controls: SIEMENS S5, without documentation.

Wire range: 3-6mm, speed: 60-80/min, max. coil weight: 1t.

The machine was overhauled by the manufacturer in 2022, the coating inside the coil was renewed, the oven was then no longer used, the oven no longer complies with the EMC guidelines, without control, an on-site inspection is possible.

coil weight: 2 x 0,15 t clamping range: 265 - 485 mm band width: 200 mm Thickness of sanding paper: 0,1 - 4 mm total power requirement: 0,25 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m - motorized double-turn coiler - newly painted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 250 mm coil outside dia.: 1400 mm weight max. in kg: 2500 kg plate thickness: 2 ... 4 mm straightening feed: 2,5 ... 15 m/min coiler: expanding range: mm total power requirement: 1 + 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Moulding depth: 12mmm, working area: 100x70mm, max. coil diameter: 250mm, speed: 1-30 cycles/min, with documentation, the machine was never used.

Key data: 300 , 1 , 1300

Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

MOSCA RO-TR-P-5 Strapping Machine A fully automatic MOSCA strapping machine type RO-TR-P-5. The machine is in very good condition. The original price was about 18,500 € Technical details: Heating wedge welding system with electronic heating regulation Fully automatic belt threading Drive of the unit in DC technology with wear-free direct drives Tape End Query with Tape Jam Throw Automatic belt ring ejection in case of incorrect triggering Belt coil quick-change system Wear-free, force-controlled belt guidance Integration into any processing line possible Hinged transport systems with frequency control PLC control Control panel for setting the operating modes, switching distances, strip tension Potential-free contacts to upstream and downstream systems Automatic PP straps width 5,6,7,8,9 or 12mm Data sheet & machine map under these links

Key data: 61 , 75

Origin Engine 9.1 L: 90 kW mechanical power gas supply: natural, LNG, biogas or wood gas liquid-cooled exhaust manifolds single coil per cylinder ignition system crankcase venting motor coupled to generator Generator Linz: active power - 75 kVA turnovers - 1500 1/min

USED 10000 LITRES STAINLESS STEEL 316 TANK WITH 18 M2 EXCHANGER REF.: C3315 Horizontal tank made of 316L stainless steel with a capacity of 10,000 liters. 2000x3500x10 mm shell 8 mm thick klöpper bottom In the top bottom shell there is a DN450 manhole, a connection to the DN500 column, two DN50 supply inlets, a DN40 safety valve, two pressure probes 1/2 "Gas, a DN25 nitrogen inlet At the bottom there is a DN80 outlet On the side there are 3 outputs for DN80 sight glasses and a DN25 temperature probe On one bottom there are two DN80 outputs and on the other bottom there is an exit with DN300 coil. On 4 legs. General characteristics: Material Stainless steel 316L Technical characteristics: Capacity 10.000 L Bottom type Klopper

USED STAINLESS STEEL 2000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6842 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Cónico - Sup. klopper Vessel outside diameter 1300 mm Vessel height 1260 mm Vessel height + funds TOTAL: 3700 mm Technical characteristics: Motor characteristics: Rotational speed 1400 rpm Reducer characteristics: Rotational speed 25 rpm

USED STAINLESS STEEL 2000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6843 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Cónico - Sup. klopper Vessel outside diameter 1300 mm Vessel height 1260 mm Vessel height + funds TOTAL: 3700 mm Technical characteristics: Reducer characteristics: Rotational speed 15 rpm

USED STAINLESS STEEL 5000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6844 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Champagne - Sup. klopper Half Reed + Type of agitation Impeller On Brackets Vessel outside diameter 1800 mm Vessel height 1800 mm Vessel height + funds TOTAL: 4.850 mm Motor characteristics: Power 4 kW Rotational speed 700 rpm

PLC control; Max. wire thickness W=4.3mm / t=1.4mm, The machine is fully functional and is sold without coil feeding. The additional costs are dismantling and loading costs.

USED STAINLESS STEEL 2000 LITRES REACTOR WITH AGITATION AND HALF-COIL JACKET REF.: C6845 General characteristics: Material Stainless steel Weight 1.450 kg Technical characteristics: Capacity 2.000 litros Bottom type Inf. Cónico - Sup. klopper Vessel outside diameter 1300 mm Vessel height 1260 mm Vessel height + funds TOTAL: 3700 mm Technical characteristics: Motor characteristics: Power 2.1 kW Rotational speed 690 rpm Reducer characteristics: Rotational speed 15 rpm

wire dia.: 5 - 17 mm wire length: max. 5.000 mm straightening feed: stufenlos bis ca. 60 m/min : 11 kW, 380 V, 50 Hz : 45 kW, 1480 U/min, 380 V, 50 Hz total wight: ca. 15 t : Typ DZA/20 f. 1000kg Coil The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm coil outside dia.: 1200 mm weight max. in kg: 1500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand bifilar pipe winding line Mfc.: GRAEWE GmbH Type: AEW 1000 Built: 1998 Tube dia.: 10, 12, 14 & 16 mm Coil core ID: 940 mm OD: 1250 mm Bifilar coiler Type: EW 1000 PLC Simatic S5 Consist of: De-coiler Coiler Ring coiler Bending unit Support table Cutting shear Binding device Electrical Control

Manufacturer: Blaw Knox Revamp: Clecim (1995) Configuration: 22.5”x 53 x 48”4Hi 5 Stand TCM Stand 1 Power: 1500 HP Stand 2 & 3 Power: 1750 HP Stand 4 & 5 Power: 2413 HP Main Sensors: 3 X Ray Gages                            Flat meter roll HGC: Long Stroke Cylinders in all Stands Work Roll Bending: Positive and Negative WRB available just in Stands 4 and 5 Actuators for Flatness Control: WRB and multizone WR coolant Stand 5 Strip width range: 600 - 1060mm Strip thickness range: 0.17 – 1.9mm Maximum Speed: 790 m/min Coil weight: Max 18.8 MT Capacity: 320.000 MT per year Crew: 6 Operators + 1 Crane Operator

Manufacturer: Bliss Revamp: Clecim (1994) Configuration: 19”x53”x48” 1 Stand 4Hi TMM Main Equipments:   1 Uncoiler Entry Bridle (Two Rolls 20”) Anti- crimping roll Work Roll Bending Exit Shear Exit Bridle (Two Rolls 20”) Electrostatic oiler (both sides) Tension reel HGC                                   Strip width range: 600 – 1060 mm Strip thickness range: 0.17 – 1.9 mm Maximum speed: 610 m/min Coil weight: Max 18.8 mt Inner ⌀ at exit: 508 Capacity: 300.000 MT per year Crew: 3 Operators                                                                                                                                                    

Manufacturer: Fata Production Machinery (1995) Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing Furnace (Selas) Flying Exit Shear 2 Tension Reels Line Capacity: 60.000 MT/year Maximum Process Section Speed: 113m/min Maximum Entry Section Speed: 136 m/min Maximum Strip Thickness: 0.28 mm Minimum Strip Thickness: 0.17 mm Maximum Strip Width: 1000 mm Minimum Strop Width: 700 mm Maximum Coil Weight: 18 MT Crew: 4 Operators

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Non-stick spray system Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication Powertouch control

18″ x .070″ x 6,000Lb Morvay Slitting Line Material Width: 18″, Weight Capacity: 6,000Lb, Material Thickness: .008″-.070″, Coil ID: 20″, Direction: Left to Right. Mandrel Uncoiler with Disc Brake, Powered Mandrel Expansion, Powered Hold-Down Roll, Driven Entry Pinch Rolls, Slitting Head with Adjustable Arbors, Knives & Tooling, Recoiler with Hydraulic Push-Off, Powered Over-Arm Separator, 50HP Motor, Exit 2-Arm Turnstile

Motorized reel by KEMMERICH type V2ARKBuilt in 1973Technical specifications:Max coil width: 230 mmCoil diameter: 650 mmDrive power: 0.75 kWPower connection: 380 V / 50 HzWeight approx .: 300 kgExternal dimensions approx: 800 x 700 x 900 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Swivel double reel manufactured by SCHULER type AZHR 250/2Fabr. -No: 70350300/2 built in 1970Technical specifications:Max. Coil weight: 500 kgMax. Sheet width: 500 kgMax. Sheet thickness: 2.0 mmBelt speed infinitely: 0 - 30 m / min.With- Sheet straightener adjustable with 3 pairs of straightening rollers- Sick light barrier- Loop control- Remote control / threader- Switch cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized horizontal reel make SOPREM type DH 1100/200/MMachine -No: 020983 built in 1983Technical specifications:Coil width: 400mmLoad capacity: 200 kgMax diameter: 1100mmPower connection: 220 Vused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Stock number: U2386-1 Used rotary film evaporator by Corning (UK). Evaporator has 50 l rotating evaporating flask, driven via gearbox with adjustable rotation and el motor 0.37 kW, 1425 rpm, 380 V, 50 hz. Ex design (EExdIIBT4). Heating of flask by coil inside the bath tank - can be used on steam, oil or water. Height of bath adjustable hydraulicaly by manually operated pump. Machine is equipped with two receiving tanks, condensator and all connections. All glass is made by QVF.

Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...

Key data: 450 , 1 , 1400

Payload 1200 kg Width 450 mm Coil external diameter - up to 1400 mm Motor 1.5 kW Speed adjustable by frequency conversion Btto 500 kg

Key data: 500 , 1 , 1450

Width 500 mm Load capacity 1500 kg coil outer diameter 1450 mm Spread 370- 630 mm Motor 1.1 kW Btto 400 kg

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

Qty. 1 Second-hand 4-Hi Non-Reversing Rolling Mill – still in operation! Mfc.: Lheung-Maschinery, Yushin Heavy Electric, Mitsubishi Built: Not specified! Rebuilt: 2017.08 Material: Aluminum & Aluminum Alloy Line speed: 80 m/min. Strip width: 550 mm Thickness: 0.3 – 6.3 mm Coil size: ID 508 mm OD 1500 mm Weight:

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

Bandwidth.. 1,500 mm Band thickness. 0.7 - 4.0 mm Coil weight... 20 to. Velocity 14 m/min. Working direction right/left

Machine Details Warehouse number 1105-03693 Machine Type Machining Center - Vertical Make DECKEL MAHO Type DMU 50 T Year of construction 1998 Control type CNC Control HEIDENHAIN TNC 426 Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base from stock Technical details x-travel 500 mm y-travel 400 mm z-travel 400 mm Control HEIDENHAIN TNC 426 Total power requirement 17 kW Machine weight approx. 3200 kg Information LID MAHO Vertical CNC universal milling machine / machining center Type DMU 50 T Year of construction 1998 _____________________________________________________________ Working range: Longitudinal stroke X-axis 500 mm Vertical stroke Z-axis 400 mm Transverse stroke Y-axis 400 mm Table area 700 x 500 mm Swivel range of the table +95/-10 ° Rotatability of the table 360 ° Tool holder SK 40 Spindle speeds ...

Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...

Wafios FS 41 spring coil machine Brand: Wafios Type: FS41 Wire diameter: 0.8-4.0mm Spring diameter: 70 mm Power – pcs/min: max 200 Feed length: 1,500 mm Motor power: 5.5 KW Dimensions: 1400x1410x1750 More items - new and used - can be found in our shop! International shipping costs on request!

Hydraulic power pack, hydraulic unit BOSCH REXROTH Order No: 983885 Year of construction 1982 Tank capacity: 150 litres Operating pressure: 60 bar nominal pressure / max. 100 bar Volume flow: 20 litres /min. Motor power pump: 3 kW Mains connection: 380 volts, 50 Hz. - 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63 - 2 pieces hydraulic valve BOSCH REXROTH with electro solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electro solenoid, type 4WE10D10OFLG24NZ4 - 1 piece pressure accumulator - various throttle valves, pressure regulators and pressure gauges - return line filter with indicator - hydraulic tank with maintenance cover Space requirement L x W x H: 950 x 750 x 1100 mm Weight: 400 kg good condition; used