cnc vertical lathe used for sale

Mount: BT-40, equipped with tool change magazine (30 places) including 2 machine clamps Auction-ID: A1-49889-24

Strautmann vertical hydraulic compactor press, model PP 1207, used to press and compact bottles and cans from the unpacking of products. The equipment was working when it was no longer used in 2019 due to a change in the type of plant entrances. It currently shows noticeable signs of deterioration due to the passage of time and inactivity, including rust in the carbon steel metal parts. The instrumentation is deteriorated and may require replacement. Pneumatic equipment needs a complete overhaul. The engine and hydraulic pump show signs of corrosion and the components under pressure should be replaced before the press can be put back into operation. The press is offered in its current condition, untested. Disassembly, disconnection, loading, removal, transport, repair and commissioning will be the responsibility of the buyer. It is recommended to carry out a pre-inspection before bidd ...

Wooden band saw with extendable and swivel saw table Roller diameter 200 mm Cutting height 80 mm Cutting width 180 mm Motor power 350 W Table size mm Table tilt 45 degrees Saw blade length 1400 x 6.5 x 0.35 mm Condition: never used / new (5) Auction-ID: A7-50523-847

Distance between the front columns 2100 mm and distance between the side columns 1100 mm. Additional table size 1820 × 1500 mm. Cylinder diameter 250 mm. Main table size 2600 x 1800 mm. Including REGLOPLAS 300LD temperature controller Auction-ID: A7-50524-927

X-axis: 525mm, Y-axis: 400mm, Z-axis: 450mm, Y-axis at electrode change and loading position: 675mm, internal dimensions of working tank: 750x650x420mm, max. dielectric level: 375mm, max. head load: 100kg, distance from tool carrier plate to worktable: 135-585mm, integrated C-axis speed, adjustable: 1-20rpm, measuring resolution: 0.001°, load capacity with manual electrode change: 50kg, load capacity with automatic electrode change: 15kg, support surface: 730x630mm, worktable load capacity: 1,000kg, connected load: 7kVA, fuse protection: 25A, length: 2900mm, width: 2200mm, height: 2653mm, machine weight: 4.4t, generator weight: 200kg, with documentation, C-axis, EW20 electrode changer, TAE M10 cooling unit, CO2 fire extinguishing system, 4µm filter system, locators, MultiProg software, an on-site inspection is possible.

Technical data Manufacturer: Hurco Model: VMX24 Machine Type: Vertical CNC Machining Center Year of Make: 2001 Machine number: H20131 Control: Hurco Ultimax Operating hours: 42,221 h Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Hand control unit (jog handwheel) Emergency stop available Interfaces: Port 1 / Port 2 / Coax / 10BASE-T Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-50403-3000

- Total installed power: 60 KW. - Production capacity: 555 untapped moulds / 485 mapped moulds. - Maximum cool-down time: 48 min. - Maximum sand consumption: 110 Tons/h. - Weight of the pieces: from 0.50 kg to 20 kg. - A cooling line consisting of a DISA SBC-2306 belt conveyor with an approximate length of 52000 mm is included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-2

Auction-ID: A1-50370-3

vertical machining center, year 2007, CNC S4045FD. Used machine. More info & price on IndustrialBuyer.

Key data: 1000 mm, 800 mm, 500 mm

Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg

Auction-ID: A1-50076-52

Already disassembled Auction-ID: A1-50076-1005

Behringer LPS 40-4 - Vertical Metal Band Saw - Hydraulic belt tensioning - Servo-controlled feed - Solid C-frame - Year of construction 2014 Technical data - Working area (LxWxH): 4000 x 680 x 400 mm - Smallest section height: 10 mm - Minimum section width: 15 mm - Inner table support surface: approx. 680 x 4000 mm - Indoor table max. load: 7500 kg - Outdoor table support surface: approx. 680 x 4000 mm - Outdoor table max. load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: ...

Behringer LPS 60-T - Vertical Metal Band Saw - Servo feed with cutting pressure control - Robust cast iron belt guide - Quick saw blade change - Saw drive operating hours: 32441 h - Year of construction 2017 Technical data - Working area LxWxH: 1260 x 720 x 600 mm - Smallest material height: 10 mm - Smallest section width: 5 mm - Inner table support surface: approx. 1260 x 680 mm - Indoor table max. load: 3000 kg - Outdoor table support surface: approx. 1260 x 680 mm - Outdoor table max. load: 3000 kg - Material support height approx.: 1050mm (incl. bottom tray) - Cutting speed: 10 - 110 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 100 l - Motor power - Saw drive: 5.5 kW - Motor power' hydraulic pump: 2.2 kW - Engine power - Coolant pump: 0.15 kW - Motor power - chip conv ...

Yogurt tank (storage / cooling tank) 2000 liters Size approximately 265cm high and 140øcm Auction-ID: A1-47392-351

Filling opening size: 120x60cm; bale size: 120x114x80; Max press pressure 50 tons; bale weight 450kg; 400v Auction-ID: A1-47362-10

Suitable for water or milk (not refrigerated, but CIP cleanable) Capacity approximately 22000 liters Dimensions approximately 5 meters high 2.50 wide Auction-ID: A1-47392-353

Technical data Manufacturer: BT Model: OP 1000 HSE Serial Number: 313415AA/1008 Load capacity: 1000 kg Lifting height: up to 7800 mm Load center of gravity: 400 mm Battery voltage: 48 V Net weight without battery: 2869 kg Operating hours: 1169.1 h Configuration Vertical order picker with driver's platform Liftable working platform Integrated roller conveyor on load bearing Front work lights Rotating beacon FIAMM Traction Battery Instruction manual available Condition Used condition with usual traces of storage and use Functionality not tested Auction-ID: A1-50643-99

x-axis: 2200 mm y-axis: 1700 mm z-axis: 750 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control: WinMax Travel ranges: X/Y/Z: 2200 x 1700 x 750 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Big Plus Drive power: 18/26 kW Tool changer: 40-station Table clamping surface: 2100 x 1600 mm Distance from spindle nose to table: 150 – 900 mm Equipment/Accessories: Workpiece positioning detection and tool length calibration via probe Direct measuring system (X/Y/Z axes) Production package for high-performance chip removal Internal coolant supply (ICS) 20 bar Chip conveyor Coolant system (1050 liters) with belt filter unit Coolant spray gun Chip splash guard enclosure Machine status signal light LED machine light Set of machine leveling pads Parts list and circuit diagrams on CD Programming and maintenance manuals via control help function  ...

: 0760 mm : 430 mm : 460 mm : 900x410 mm : SK 40 : 8.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: MAZAK Model No.: Variaxis i-800 NEO Year 2023 Condition Used Stock number 9210 Mazatrol Smooth Ai control system Work table length 800 mm Work table width 630 mm Maximum table load (uniform) 1000 kg Maximum vertical spindle speed 18000 1/min X-axis travel 750 mm Y-axis travels 890 mm Travel Z axis 600 mm Taper HSK A100 Number of axles 5 pieces Number of Stacking Positions 80 Pieces Machine height 3497 mm Machine length 2695 mm Machine width 4890 mm Machine weight 18080 kg Equipment: Chip conveyor Handwheel Blowing air on the workpiece Air cooling through the spindle Workpiece rinsing Oil Mist Separator (Gx1000) Smooth Cam AI M Renishaw RMP600 Workpiece Probe High pressure unit (70 bar) Camera in the machine working room Coolant coolers Renishaw PRIMO LTS Tool Probe

Key data: 500 mm, 420 mm, 380 mm

CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 500 Y 420 Z 380 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 32 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3 D Probe Coolant Setup 4 Height Adjustable Machine Shoes Operating Instructions

Stroke ( X/mm) 760 Stroke ( Y/mm) 460 Stroke ( Z/mm) 460 Type of controll siemens spios Tool magazine yes Number of inserts in the tool magazine 24 Chuck connection iso 40 Machine Conditions ce marked

vertical machining center, year 2007, CNC 21 I MB (AI200). Used machine. More info & price on IndustrialBuyer.

The machine is in good technical condition; it can be tested by prior arrangement.

VDL UVA Lima 250 High speed VFFS Serial: 2016542 2016, Stainless, high speed continuous motion vertical form seal bagging machine, jaw width 320mm, up to 200 bags per minute, Allen Bradley HMI touch panel, with Becker vac pump and Markem Smartdate X40, comes with four different sets of forming shoulders a trolley of additional parts and a flighted elevator outfeed conveyor, 3Ph

vertical machining center, year 1930. Used machine. More info & price on IndustrialBuyer.

roll diameter: 320 mm throat: 310 mm workpiece height: 230 mm table-size: 505 x 505 mm cutting speed: 12 - 375 m/min turning speeds: 39 - 1230 U/min saw band length: 2460 - 2620 mm voltage: 400 V total power requirement: 1,3 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 0,80 x 0,80 x 1,65 m welding equipment: IDEAL air blow equipment: - Serial-No.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 850 mm, 520 mm, 475 mm

CNC Vertical Machining Center DECKEL MAHO DMC 850 V With track control Heidenhain TNC 640 Year of Make: 2016 Travel: X 850 Y 520 Z 475 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 1160 mm x 575 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) 3 D Probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate Safety Lenses Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 Sealing air for linear measuring systems Spindle Oil Cooler Chip conveyor Chip flushing Swarf Spray Gun Coolant device (reinforced coolant pump) 4 Height Adjustable Machine Shoes Operating Instructions

Vertical Compressed-Air Receiver Tank Vertical black-painted steel compressed-air receiver mounted on three support legs, with multiple air connections, isolation and drain valves, lifting eye and pressure gauge. Power: Not applicable Configuration: Vertical pressure vessel with three support legs, air connections, valves, lifting eye and pressure gauge Pressure gauge range: Approximately 0–16 bar / 0–230 psi Application: Compressed-air storage and pressure buffering Condition: Used Approximate dimensions: 800 × 800 × 2,300 mm Approximate weight: 220 kg All descriptions are indicative only. Auction-ID: A1-50546-75

General Description Universal tool milling machine manufactured by DNT Kaunas (Lithuania), designed for precision milling, drilling, slotting and toolroom machining. The machine is equipped with a vertical spindle, rotary dividing table and tilting work table, making it suitable for versatile machining operations. Technical Details Manufacturer: DNT Kaunas Machine type: Universal tool milling machine Year: Not confirmed Spindle speeds: 145 / 290 / 580 / 725 / 1,450 / 2,900 rpm Vertical spindle Rotary dividing table included Tilting work table included Longitudinal power feed Machine work light Coolant splash guard Condition Fair to good used condition. The machine appears mechanically complete with rotary dividing table, tilting work table, power feed and spindle assembly installed. Cosmetic paint wear and light surface corrosion are visible, consistent with industrial ...

General Description Vertical spindle rotary surface grinding machine designed for precision grinding of large flat components. The machine is equipped with a rotary electromagnetic chuck, hydraulic controls and a vertical grinding spindle for efficient surface grinding operations. Technical Details Machine type: Vertical spindle rotary surface grinder Rotary electromagnetic chuck Chuck diameter: 800 mm Vertical grinding spindle Wheelhead Hydraulic controls Operator control panel Electrical control cabinet Condition Used industrial condition. The machine appears complete with rotary electromagnetic chuck, grinding wheelhead, hydraulic controls and electrical cabinet. Operational status, spindle condition and grinding accuracy have not been tested. Auction-ID: A7-50745-45

General Description Vertical coordinate boring machine designed for precision boring, drilling and machining of tooling, molds, gauges and precision mechanical components. The machine is equipped with a precision coordinate table and rotary work table for accurate positioning and machining operations. Technical Details Machine type: Vertical coordinate boring machine Vertical precision spindle Large precision rotary table Precision graduated spindle feed Coordinate table with longitudinal and cross travel Enclosed column drive Heavy cast iron construction Condition Used industrial condition. The machine appears complete with precision spindle, rotary table, coordinate table and enclosed drive system. Operational status, spindle accuracy and positioning precision have not been tested. Auction-ID: A7-50745-42

Used and unchecked; viewing desired Auction-ID: A1-50737-95

CNC Control: SIEMENS 810 D X/Y/Z axis strokes: 1020 × 510 × 510 mm Table dimensions: 1200 × 500 mm Permissible load on table: 800 kg Max. spindle speed: 10,000 rpm Spindle power: 10 kW Spindle taper: ISO 40 Tool changer: 20 positions Weight (kg): 5800 Year & Manufacturer: 2000 – HURON Auction-ID: A1-50714-4024

Netmak FR S900 Copy Router / Profile Milling Machine Industrial copy-routing and profile-milling machine with adjustable worktable, spindle head, work-area lamp, emergency stop and foot control. Manufacturer: Netmak End. Ahş. Mak. A.Ş. Model: FR S900 Year: 2016 Serial number: 16-09-042 Power: 2.4–3 kW Operating speeds: 9,000 / 18,000 rpm Current: 5.5–7.2 A Lamp supply: 220 V Configuration: Adjustable worktable, spindle head, work-area lamp, emergency stop and foot control Certification: CE marked Condition: Used Approximate dimensions: 1,000 × 1,700 × 1,650 mm Approximate weight: 600 kg All descriptions are indicative only. Auction-ID: A1-50546-80

TWINHORN VF-500-5A 5-axis continuous vertical machining center from 2023, Heidenhain TNC 640 control, spindle 20,000 rpm. Recent machine, very few hours, in perfect working order. Features Brand / Model: TWINHORN VF-500-5A (Chi-Fa Machinery, Taiwan) Serial No.: V2304001 Year of Manufacture: 2023 (09/2023) CNC control: Heidenhain TNC 640 5 continuous axes: cradle table with B and C axes, Campower roller gear cam drive without backlash Spindle speed: 20,000 rpm max X, Y, Z Fast Forward: 48 m/min Strokes: X 360 mm - Y 355 mm - Z 330 mm Maximum load on the table: 200 kg Maximum tool weight: 3 kg (30 kg gross) - maximum diameter 80 mm Probe integrated into tool management Power supply: AC 415 V - 50 Hz - 3 phases - 21 kW - 41 A Compressed air required: 5 to 6 bar, 150 l/min Machine weight: 3 tons Equipment Tool magazine with tool holder LOSMA Galileo ...

Hänel Lean-Lift 3260-635 HS32 Vertical Lift Storage System Manufacturer: Hänel Büro- und Lagersysteme Type/Model: Lean-Lift 3260-635 HS32 Year of manufacture: 2021 Serial number: 700.112/10-0 Quantity: 1 unit Automated vertical lift storage and retrieval system with enclosed high-bay construction, motorized tray handling, extraction mechanism and operator access opening with Hänel control terminal/inventory interface. Electrical supply: 400 V, 3-phase, 50 Hz Rated current: 16.1 A Power: 7.5 kW Maximum supply protection: 20 A / 400 V Maximum tray/container load: 400 kg Maximum number of containers/trays: 81 Maximum total load capacity: 40,000 kg (2 × 20,000 kg) Approx. dimensions (L × W × H): 3,260 × 3,000 × 9,000 mm Approx. weight: 8,000 kg Vertical/horizontal motor types indicated on the identification plate: MB2501LS12VL-MG/FCRJ01 and S37DRS71M4/BE05/T ...

Technical details Type: Automated storage and retrieval system (AS/RS) Configuration: - Multi-level steel storage rack - Chain-driven transfer shuttle - Vertical lift system - Electric geared drive motor - Guide rail system - Loading and unloading station - Push-button control station - Pallet/bin support rails Application: - Automated warehouse storage - Industrial pallet handling - Bin storage and retrieval - Production inventory management - Manufacturing logistics Construction: - Heavy-duty welded steel structure - Approx. 8–12 storage levels - Chain-driven transfer mechanism Dimensions: - Length: Approx. 20000 mm - Width: Approx. 6000 mm - Height: Approx. 12000 mm Weight: Approx. 15000 kg Condition: Used Observed condition: - Structure appears substantially complete - Chain drive and sprockets installed - Geared drive motor present - Lift frames app ...

DRUKOV BRNO VSV Vertical Pressure Vessel Vertical steel pressure vessel and compressed-air receiver identified as TNK 02, suitable for compressed-air storage and related industrial applications. Manufacturer: DRUKOV BRNO Model: VSV Year: 2017 Serial number: 19665 Volume: 3,000 L Maximum allowable pressure: 10 bar Test pressure: 14.5 bar Allowable temperature range: 0–50 °C Configuration: Vertical steel vessel for compressed-air storage Certification: CE marked, 1015; fluid group 2 Condition: Used Approximate dimensions: 1,200 × 1,200 × 3,300 mm Approximate weight: 705 kg All descriptions are indicative only. Auction-ID: A1-50546-62

CHIRON MODEL FZ18W MAGNUM 4 axis Vertical machining center with rotopallet and double 4th axis 20 TOOLS ISO 40 Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kW X = 625 Y = 400 Z = 400 Rapids 40m/min Table area: 2 x 900 x 470 - TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos. - original HAWE hydraulic unit - FANUC 0M 1995 Can be inspected under power in our warehouse Mimu machine tools (Italy), X: 625, Y: 400, Z: 600, 4th axis: Yes, (2x) Tsudakoma 360 000 pos.

X / Y / Z axis strokes: 1020 × 510 × 550 mm Spindle power: 11 kW Max. spindle speed: 6,000 rpm Spindle taper: BT 40 Tool magazine: 22 positions Weight (kg): approx. 6000 Year & Manufacturer: 1993 – FONG LEE Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4060

General Description Universal external cylindrical grinding machine manufactured by WMW Glauchau (former East Germany). Designed for precision external cylindrical and tapered grinding of shafts and other rotational workpieces. The machine is equipped for grinding between centres or in a chuck. Technical Details Manufacturer: WMW Glauchau Machine type: Universal external cylindrical grinding machine Year: Not confirmed Grinding wheel diameter: 315 mm Maximum grinding wheel speed: 1,800 rpm 315 mm 3-jaw chuck included Universal workhead Tailstock Hydraulic reciprocating table Grinding wheel guard Coolant system Separate electrical control cabinet Condition Used industrial condition. The machine appears complete with 315 mm three-jaw chuck, workhead, tailstock, grinding wheel, hydraulic table, coolant system and electrical cabinet installed. Normal cosmetic wear and si ...

Description Item # 9398 - BAGGING MACHINE (vertical form fill seal) Manufactured by TNA Model Robag 3C Make & Type : R3C-320TX-RSJ-1S Year 2012 230/380/415/460Volts, 3Phase, 50/60Hz Rotary Single Jaw Single Servo Up to 320mms wide bags, minimum 40mms 50 to 1000mms bag lengths Running on 100mm x 100mm, 25gr bags Around 100ppm on this bag size

Equipped with side-mounted motor with agitator, cooling coil, snuff valve, bottom outlet and sight glass on 8 legs Auction-ID: A1-50393-62

Technical details Type: Vertical slotting machine Configuration: - Vertical reciprocating ram - Adjustable ram stroke - Large T-slotted worktable - Longitudinal and cross manual feeds - Automatic table feed controls - Mechanical feed gearbox - Electrical push-button controls - Heavy-duty cast-iron frame Application: - Internal keyway machining - Slot machining - Internal spline machining - Internal profile machining - Flat surface machining - General metalworking Construction: - Conventional mechanical operation - Vertical ram drive - Integrated gearbox Dimensions: - Length: Approx. 2100 mm - Width: Approx. 1700 mm - Height: Approx. 2600 mm Weight: Approx. 5000 kg Condition: Used Observed condition: - Machine appears substantially complete - Ram assembly present - Worktable and T-slots appear serviceable - Feed controls intact - No visible structural dam ...

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-53

Equipped with 400Volt agitator at the bottom, diameter approximately 1400mm, total height approximately 4100mm. Auction-ID: A1-50393-93

Diameter approx 2250mm, total height approx 5400mm. Auction-ID: A1-50393-98

Diameter approx 3100mm, total height approx 4750mm, equipped with agitator Auction-ID: A1-50393-79