used CNC Pressbrakes for sale

200 ton x 4000mm Y1 Y2 X R Z1 Z2

Key data: 80 t, 1530 mm, 1570 mm

BYSTRONIC Xpert 80/1530 press brake (2018) Bending hours: 18,517 Bended cycles: 2983829 Bending length: 1530 mm. Bending force: 800 kN Maximum career: 200 mm. Opening (D): 515 mm. Distance between lateral uprights: 1570 mm. Table width: 60mm. Rear butt range of the x: 500 mm axle. X: 300 mm axis route. Advance speed of the x: 1500 mm/s axis Axis progress R: 100 mm. Axis speed R: 500 mm/s. Z -displacement Z: 1455 mm/s. Advance speed of the z axis: 2000 mm/s. Y axis speed: 250 mm/s. Maximum bending speed of the y: 25 mm/s axis Precision of the Y axis positioning: 0.004 mm. Oil capacity: 200 l. Main motor energy: 15kw. Total power: 18 kW. Working voltage: 3 pH 400 v ca Frequency: 50 Hz Command voltage: 24 V CC Nominal fuse current: 63 A Maximum hydraulic work pressure: 320 bar. Weight: 6500 kg. Dimensions: Length: 2030 mm. X Width 1700 mm. X high: 2659 mm.

100 ton x 3000mm 8 Axis

Key data: 250 t, 3200 mm, 3200 mm

Electric Press Brake Bull30 CoastOne Oy - Made in Finland Spindle drive - 5 controlled spindles Directly controlled crowning in the upper beam Pressing force: 2500kN Bending length: 3100mm Light barrier: Lazersafe IRIS Tool clamping: WILA hydraulic Back gauge: X-R-Z1-Z2 controlled Control: TC15-2D Graphics Control Front support arms, height-adjustable and foldable Work light at the front and in the stop area Price and delivery time on request Other equipment options on request Warranty: 36 months after installation

Key data: 30 t, 900 mm, 850 mm

Fast Electric Press Brake C9HS - High Speed CoastOne - Made in Finland Pressing force: 30T Y-axis, feed speed 250mm/s X-axis, speed 1000 mm/s Bending length: 900mm Spindles: 1x30T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS Backgauge: 5 axis controlled X-R-Z1-Z2-Dx axes Press brake tool holder: manual type WILA / Trumpf / type B / R2 Front folding support table Light work area front and rear 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 44 t, 1300 mm, 1250 mm

Electric Press Brake C12 CoastOne - Made in Finland Pressing force: 44T Bending length: 1300mm Spindles: 2x22T Control: TC15-2D Graphics Backgauge: 4-axis controlled X-R axes Press brake tool holder: Quick clamping system TEDA top AMADA / Promecam / Type A / Type R1 Light in the front work area Front support table 1 set of bending tools from stock ATS 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 44 t, 1600 mm, 1550 mm

Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: AMADA Promecam / Type A / Type R1 Front support table 1 set of bending tools from stock ATS 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 44 t, 1600 mm, 1550 mm

Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Light barrier: Lazersafe IRIS Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake tool holder: Hydraulic WILA tool clamping up / down 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Backgauge: 2 axis controlled X-R axles Lazersafe photoelectric sensor: 100mm/s delivery speed Bending tool holder: Type A / R1 / AMADA / Promecam Quick release system TEDA Speed Grip 4x Adapter Front support tables Front light 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 22 t, 900 mm, 850 mm

Electric Press Brake Cone C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 22 t, 900 mm, 850 mm

Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 22 t, 900 mm, 850 mm

Bending cell RoboCone RC9 CoastOne - Made in Finland Complete bending cell with a Cone C9 electric press brake and a Yaskawa / Motoman GP25 (25kg) robot. Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

working lenght 3.050 mm power 60 ton throat deepth 350 mm CNC cybelec nr.02 axes back gauge manual table compensation

3100 x 110t.

pressure: 110 tchamfer lenght: 3100 mmdistance between columns: 2550 mmcolumn arm: 250 mmdayligth: 375 mmstroke: 150 mmajustment speed: 100 mm/secworking feed: 8.0 mm/secreturn speed: 65.0 mm/sectable width: 160 mmwork height max.: 900 mmoil volume: 130 ltr.total power requirement: 7.5 kWweight of the machine ca.: 8700 kgrange L-W-H: 3220 x 1290 x 2550 mm well maintained / good condition ()Furnishing:- electro-hydraulic CNC press brake- DELEM CNC control - model DA 58 Swivel control panel, front left 2D graphical programming & product display Tool & program library- CNC axis adjustment Y1 - Y2 - X axis- CNC electro-motorized back gauge incl. 2x manually adjustable stop fingers (R+Z axis)- manual table cambering, adjustment via hand crank including analogue value display- 1x split pointed upper tool (manufacturer UKB)- 1x universal rotating Multi-V die block incl. 2x chain for hanging in  ...

Key data: 150 t, 3600 mm, 3100 mm

Capacity: 150 ton Bending length: 3,600 mm Stand width: 3,100 mm Back gauge: 600 mm Stroke length: 240 mm Projection: 400 mm Controls: Delem 52 Equipped with: - 1 set of bending tools - Hand/foot control Country of origin: Netherlands Motor power: 11 kW Machine LxWxH: 3750 x 1500 x 2900 mm Machine weight: 14.500 kg

pressure: 50,0 tchamfer lenght: 2050 mmdistance between columns: 1550 mmdayligth: 320 mmstroke: 120 mmajustment speed: 100 mm/secworking feed: 10,0 mm/secreturn speed: 75,0 mm/seccolumn arm: 250 mmwork height max.: 900 mmtable width: 100 mmconnected load: 7,2 kWoil volume: 90 ltr.weight: 2600 kgrange L-W-H: 2250 x 1100 x 2050 mmFurnishing:- DELEM CNC control model DA 24e- swiveling control panel- electrical backgauge (X axis)- 2x manually adjustable stop fingers lateral + vertical adjustment (R + Z axis)- 2x front support arms- SICK light barrier in front- 2 hand / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DENER DMP 3100/200 SMART CNC press brake was built in 2007 in Turkey. The machine, distinguished by its extremely stable construction, high press force of 200 tonnes and excellent precision, is the ideal choice for even the most intensive machining in any production facility. To further improve the machining process, all parameters are programmed in the intuitive CYBELEC DNC 60 CNC controller with many useful functions. The total weight of the machine is 10500 kg. Technical data of the DENER DMP 3100/200 SMART press brake - CNC control: CYBELEC DNC 60 - maximum press force: 200 t - maximum workpiece length: 3100 mm - WILA hydraulic top and bottom tool clamping - motor power: 15 kW - maximum pressure: 290 bar - oil tank capacity: 150 l - weight of machine: 10500 kg

DENER SERVOBRAKE 4015 CNC press brake which was built in Turkey in 2016, guarantees the highest quality of workpiece machining with simultaneous low energy consumption and low operating costs. Distinguished by its sturdy construction and state-of-the-art technology, the machine is equipped with a powerful electric drive based on servomotors and belts with a multi-belt system. Replacing the standard hydraulic system with an electric drive makes the SERVOBRAKE DENER DDM 4015 servo press brake much easier to maintain and faster than conventional hydraulic presses. This is possible because the machine is free of hydraulic oil, filters, seals and other hydraulic components. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. The DENER servo electric press brake is also equipped with an in ...

Press brake Ultima 4100 mm Pressing force 320 tons Control ESA 650 Windows with workstation software 4-axis backgauge CNC-controlled 1 backgauge X3 CNC controlled 2 additional stop fingers 2 heavy-duty mounting arms adjustable in height and width to linear guide + parking space Machine table special design 2 pneumatic sheet metal supports with brushes Hydraulic clamping for Wila Matritzen incl. hydro unit Hydraulic clamping for Wila upper tools incl. hydro unit Raised frame stroke 400 mm Installation height 730 mm D-STM Automatic sheet thickness measurement-20mm incl. correction database B9mn0pxrvh Oil Cooler

Model Ultima Hybrid version UBB 170 t/3200 mm New machine trade fair stock machine SPECIAL PRICE YEAR OF YEAR 2022 Linear CNC measurement for depth Y1-Y2 ESA 860, 2D graphical CNC control, 15" touch CNC-Y1Y2-X-R-Z1-Z2 backgauge on ball screws CNC-controlled hydraulic crowning 1 set of upper tools PS,135-85-R=.8, 3x 835 + 1x 805 divided 1 set of Rolleri M460-R sub-tools CNC-controlled bending aid CE Lasersafe Control ESA 860W, PC graphical control with automatic bending sequence calculation, collision warning 19 inch touch screen incl. remote assistance via Teamviewer and workstation software Backgauge 6-axis CNC backgauge Y1Y2-X-R-Z1-Z2 Drive SERVO DRIVE hybrid up to 70% energy savings EXTRA high speed 200 mm/s from and up Nvs32 CNC-controlled bending aid Lower tool holder Small narrow table, width 60mm x height 110mm Front support arms 2 heavy sup ...

Key data: 170 t, 3200 mm

Deratech Ultima Press Brake 170-3200 Control ESA 660 W 2-D Graphics Full Windows Capable 19 Inch 4-axis backgauge X-R-Z1-Z2-instead of X-R Backgauge finger X3, CNC controlled+/-150 mm Additional heavy support arm on linear guide with parking space Higher narrow table for WILA plug-in matrices WILA hydraulic quick clamping incl. hydro unit CNC-controlled dynamic crowning incl. automatic Compensation during the bending process Tools, each 3100 mm BIU 021 (replica of UKB 19.021, new 2020) BIU 023 Wila V-die 85° 16/22/35/50 Rolleri T Die 30° 08/12/25/40 Rolleri At call

-Exhibition Machine- • Linear CNC measurement for depth Y1-Y2 • CybTouch 12, 2D graphical CNC control, 12" touch • X-R backgauge on ball screw • Manual mechanical crowning, type Wila • Without tools • 2 support arms on linear guide • CE with LazerSafe / Fiessler-Akas light curtain Demonstration machine configured for trade fair approx. 6 weeks

Bending Lenght 3050 mm Bending force 135 ton Crowning Type Motorised Controller ModEva 19T CNC back gauge X - R Z manuel

Capacity: 160 ton Bending length: 3,050 mm Stand width: 2,550 mm Backgauge: 650 mm Bending speed: 9 mm/sec. Return speed: 86 mm/sec. Stroke length: 175 mm Projection: 350 mm Equipped with: - Light cabinet - Crowning - Press brake tools - Side and rear protection Motor power: 15 kW Machine LxWxH: 4250 x 2170 x 2800 mm Machine weight: 9200 kg

DURMA E 2040 CNC press brake which was built in 2009 in Turkey, offers the highest productivity and precision in workpiece bending, while maintaining low operating costs. The machine performs excellently even during the most intensive processing thanks to its extremely stable design, high press force of 40 tonnes and intuitive CNC control DURMA DU 6000. The work area is protected by the DFS LASER photoelectric safety device, which automatically switches off the machine’s power supply in the event of an interruption of the emitted laser beam. The price also includes tooling shown in the photos, worth 15 500 PLN. The DURMA E-2040 press brake weighs 4060 kg. Technical data of the DURMA E 2040 CNC press brake - CNC control: DURMA DU 6000 - maximum press force: 40 t - maximum workpiece length: 2050 mm - slider stroke: 160 mm - reach: 350 mm - distance between columns: 1650 mm - ap ...

pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 200 mmthroat: 350 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 86.0 mm/secControl: DU 6000 work height max.: 910 mmtable width: 240 mmoil volume: 150 ltotal power requirement: 15.0 kWweight: 9820 kgrange L-W-H: 4200 x 2100 x 2700 mm New price ~ 60.000 euros Special price on requestFurnishing:- electro-hydraulic CNC press brake Stress-relieved steel structure body = durable monoblock frame- DURMA DU 6000 CNC control (CYBELEC) Swivel operation, front right Positioning of the back gauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Possibility of programming various programs- CNC controlled axes: Y1 + Y2 + X- CNC electro-motorized back gauge (X axis) 2x manually adjustable stop fingers including lateral and height adjustment (Z+R axis)- manual table crowning includi ...

250 Ton x 5100mm Over Bed CNC Press Brake. Admitting 4500mm Between Side Frames. 3000mm Long Heavy Duty Back Gauge. Including Cybelec DNC 800 8 axis control. (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing. Infra-Red Operator Guards. Hydraulic Top Tool Clamping. Side & Rear Safety Fences. Tooling Carousel. S/No 97P288. New 1997

150 ton x 4000mm

Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm

pressure: 150 tchamfer lenght: 4050 mmdistance between columns: 3050 mmcolumn arm: 350 mmdayligth: 430 mmpiston stroke: 220 mmtable width: 300 mmoil volume: 390 ltr.pressure: 265 bartotal power requirement: 18,5 kWweight of the machine ca.: 13.000 kgrange L-W-H: 4900 x 2250 x 3200 mm from a maintenance workshopFurnishing:- CYBELEC CNC control, model DNC 30- Swivel control, right front- controlled axes Y1 + Y2 + X + R- CNC motorized table crowning- hydraulic upper tool clamping- Pneumatic lower tool clamping- 2x front pneumatic bending aids- 2x free-moving 2 hand controls/foot controls- lateral protective device (protective grille)- rear protective device (protective grille)- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tchamfer lenght: 4050 mmdistance between columns: 3050 mmcolumn arm: 350 mmdayligth: 430 mmpiston stroke: 220 mmtable width: 300 mmoil volume: 390 ltr.pressure: 265 bartotal power requirement: 18,5 kWweight of the machine ca.: 13.000 kgrange L-W-H: 4900 x 2740(1890) x 3310 mm from a maintenance workshopFurnishing:- CYBELEC CNC control, model DNC 30- Swivel control, right front- controlled axes Y1 + Y2 + X + R- CNC motorized table crowning- hydraulic upper tool clamping- Pneumatic lower tool clamping- 2x front pneumatic bending aids- 2x free-moving 2 hand controls/foot controls- lateral protective device (protective grille)- rear protective device (protective grille)- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC press brake Manufacturer EHT Type EHPS 20-35 Year of construction 1995 Control DNC800 Bending length 3550mm pressing pressure 200t Block matrices and segments are also available Documentation and operating instructions available Machine was overhauled 3 years ago and put aside. No longer energized.

Force of pressure: 250 t working width: 3550 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: Yes Electr. Supply: 400 V, approx. 26 kW weight: 20 t space: 2100 x 3800 x 3100 mm

pressure: 225 tchamfer lenght: 3050 mmdistance between columns: 2550 mmcolumn arm: 300 mmajustment speed: 110 mm/secwork speed: 9.0 mm/secreturn speed: 130 mm/secwork stroke: 240 mmdayligth: 320 - 560 mmtable height: 1000 mmtable width: 200 mmoil volume: 350 ltr.operating pressure: max. 296 barair pressure: 4.5 - 6.0 barvoltage: 400 Volttotal power requirement: 18.5 kWweight: 14900 kgrange L-W-H: 5180 x 2400 x 3100 mmFurnishing:- electro-hydraulic CNC die bending/press brake- CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library- CNC-controlled back gauge adjustment (X-axis) Stop range X axis of bending line .. 5.0 - 1.000 mm Adjustment speed .. max. 250 mm/sec.- CNC-controlled vertical adjust ...

pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2550 mmcolumn arm: 400 mmram stroke speed: 100 mm/secreturn speed: 9.0 mm/secwork speed: 90.0 mm/secwork stroke: 200 mmdayligth: 447 mmtable height: 900 mmtable width: 240 mmoil volume: 200 ltr.voltage: 400 Volttotal power requirement: 15.0 kWweight: 11600 kgDimensions (HxWxD): 4550 x 2250 x 2850 mm current new price approx. 80.000 euros Special price on requestFurnishing:- electro-hydraulic CNC press brake- CYBELEC CNC control model DNC 60 HP swiveling operation, front left numerical control Tool and product library- CNC controlled axes: Y1 - Y2 - X axis- CNC electro-motorized back gauge (X axis) with 2x manually adjustable stop fingers (R+Z axis) Travel X = 800 mm- manual table cambering, adjustment via handwheel with analogue value display- Upper tool holder with wedge crowning (AMADA)- 1x set of split upper tools- 1x MUL ...

ERMAK HAP 2600 X 80 CNC hydraulic press brake was manufactured in 2005 by the Turkish company ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine characterised by high performance and robustness, performs precision bending of workpieces with a maximum length of 2600 mm and a thickness of 6 mm with a force of 80 tonnes. The machining parameters in the X and R axes are programmed easily and conveniently through the CYBELEC DNC 60 CNC controller located on a mobile arm. The HAP 2600-80 press brake also offers a high level of operator safety, thanks to an emergency button and light curtains made by FIESSLER ELEKTRONIK to prevent unauthorised entry into the machine’s working area. The total weight of the press brake is 5600 kg. Technical specifications of the ERMAK HAP 2600 X 80 CNC press brake - press force: 80 t (800 kN) - feed in X/R axis: 500/160 mm - maximum sheet metal length: ...

pressure: 40 tchamfer lenght: 1000 mmdistance between columns: 800 mmcolumn arm: 250 mmram stroke speed: 110 mm/secreturn speed: 105 mm/secwork speed: 11 mm/secwork stroke: 100 mmoil volume: 60 ltr.table height: 800 mmtable width: 90 mmvoltage: 400 Voltengine output: 4,0 kWback stop - adjustable: 500 mmrange L-W-H: 2600 x 1950 x 1850 mmWeight: 1850 kgdayligth: 308 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 3100 mmdistance between columns: 2600 mmdayligth: 550 mmthroat: 410 mmstroke: 275 mmworking feed: 10,0 mm/secreturn speed: 120,0 mm/secwork height max.: 900 mmquantity of oil: 200 lControl: DELEM DA 58 T total power requirement: 11 kWweight of the machine ca.: 8650 kgdimensions: 4250 x 2050 x 2800 mm-------------------------------------------------- ---------Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- ---------Furnishing:- DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface intuitive, graphical entry of profiles Automatic calculation of features: tool safety zones,Press for ...

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmdayligth: 550 mmthroat: 410 mmstroke: 275 mmworking feed: 10 mm/secreturn speed: 135 mm/secwork height max.: 900 mmquantity of oil: 200 ltotal power requirement: 15 kWweight of the machine ca.: 9450 kg- DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool with PS 135.85-R08, system A with quick-change clamp- Additional crowning device in the tool holder of the upper tool- 4V universal die block M 460 R with die shoe 60 mm holder- BOSCH / HOERBIGER hydr. Component ...

pressure: 135 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 200 mm/secreturn speed: 190 mm/secwork speed: 12,0 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmvoltage: 400 Volttotal power requirement: 15,0 kWweight: 10.800 kgrange L-W-H: 5100 x 2100 x 2850 mm--------------------------------------------------HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A- with additional cro ...

pressure: 175 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secreturn speed: 190 mm/secwork speed: 12 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmvoltage: 400 Volttotal power requirement: 15,0 kWweight: 12.100 kgrange L-W-H: 5.100x2.150x2.850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmdayligth: 550 mmthroat: 410 mmstroke: 275 mmworking feed: 10,0 mm/secreturn speed: 185 mm/secquantity of oil: 300 lControl: DELEM DA 66T total power requirement: 18,5 kWweight of the machine ca.: 13900 kgdimensions: 5150 x 2250 x 3000 mmHIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeincreased projection-------------------------------------------------- -------Furnishing:- DELEM CNC control model DA 66T- swiveling touch screen control unit- 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split deer foot upper tool Roleri 135.85.R08, System A- with additional crowning of the upper wedge- Universal die block- LEUZE light barrier behi ...

Key data: 315 t

Inv. Num. : 4650 Type: LODD 315 Producer: ESPE Created: 1996 Parameters: Compressive force: 315 t Maximum bending length: 4000 mm Machine height: 4150 mm Machine length: 4000 mm Machine width: 2200 mm Machine weight: 33 t Equipment: Tools

pressure: 20,0 tchamfer lenght: 850 mmdistance between columns: 850 mmback stop - adjustable: 375 + 400 mmstroke of upper beam: 196 mmdayligth: 470 mmajustment speed: 200 mm/sectable height: ca. 900 mmtotal power requirement: 5,0 kWweight of the machine ca.: 2500 kgdimensions of the machine ca.: 1800 x 1600 x 2000 mm New price ~ 85.000 euros well-kept / very good condition () with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oilDescription :High performance, fast travel speeds and the best ergonomicsthis bending machine to a perfect tool in terms of productivity andAccuracy.This allows an unrivaled high productivity in the field of small andmiddle bending parts can be achieved, since even complicated bending sequencesseveral stations can be processed very quickly.A large number of different and universally divided tools are possiblean a ...

Key data: 160 t, 3000 mm, 2550 mm

Max. bending length 3000 mm Max. pressure 160 Ton Distance between side frames 2550 mm Length of stroke 200 mm Control DELEM DA 24 e Equipped with: Motorized back gauge Upper dies Bottom dies Segments Foot contact 2-hand operated Service tools etc.

pressure: 80.0 tchamfer lenght: 2550 mmdistance between columns: 2060 mmajustment speed: 90.0 mm/secworking feed: 10.0 mm/secreturn speed: 90.0 mm/secstroke: 140 mmwork height max.: 930 mmdayligth: 375 mmNumber of working hours: ca. 1.300 htotal power requirement: 8.5 kWweight: 6300 kgrange L-W-H: 2830 x 1900 x 2500 mm Machine from a vocational training center (Chamber of Crafts) good / well-maintained condition with only approx. 1.300 operating hours ()Furnishing:- CNC electro-hydraulic press brake- DELEM CNC control - model DA 58 Swivel control panel, front left 2D graphical programming & product display Tool & program library- CNC axis control: Y1 - Y2 - X axis + motorized crowning- electro-motorized & controlled backgauge with 2x manually movable stop fingers (R+Z axis)- manual upper tool & lower tool clamping- split upper and lower tools- 2x stable, front support arms - movable incl ...

FINN POWER E-BRAKE 65-2550 HS TS 3 servo electric press brake built in 2007 in cooperation with SAFAN (now SafanDarley), achieves the highest quality of workpiece machining while maintaining low operating costs. The high press force of 65 tonnes, 6 numerically controlled axes (X, Y1, Y2, R, Z1, Z2), electric drive and low energy consumption make the machine the best choice among other press brakes available on the market. One of the machine’s greatest advantages is its electric drive, which eliminates the occurrence of the so-called deflection arrow effect and its compensation through even force distribution on the slider. Additionally, in order to increase the working speed and reduce noise, the FINN POWER press brake only consumes electricity when the slider is going down. The entire working area is protected by a programmable light curtain that, when interrupted by hand, allows f ...

pressure: 50 tchamfer lenght: 1500 mmdistance between columns: . mmControl: Cybelec closing speed: 95 mm/minworking feed: 1-10 mm/secstroke length max.: 150 mmoverrun time: 59 mstracking travel: 6 mmweight of the machine ca.: 6,2 tdimensions: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bending length 3000 mm Max. pressure 135 Ton Length of stroke 250 mm Control DELEM DA 66 W Rapid movement speed 0 - 100 mm/sec Pressing speed 0 - 10 mm/sec Main motor power 15 Kw