We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,107 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Fiber Laser welder 1 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported.
used
Fiber Laser welder 1,5 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Manual laser welding devices with optical fiber laser emitters are the latest development in the field of welding technologies, which replaced argon arc welding. They are used for welding such metals as stainless steel, iron, aluminum and other metals.
used
Fiber Laser welder 3 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ℃ ...
used
Fiber Laser welder 2 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ...
used
7 axes: Y1 / Y2 / X / X´ / Z1 / Z2 / V willa tooling Capacity: 80 ton x 3100 mm Backgauge: CNC Control: TS1 touchscreen Passage between uprights: 2550 mm Max stroke: 240 mm Max distance between table -- ram: 530 mm Depth of throat: 400 mm Locking speed: 300 mm/sec Working speed: 10 mm/sec Returning speed: 120 mm/sec Electric motor (power): 5,5 kW Length: 4000 mm Depth: 2000 mm Height: 3200 mm Weight: 7 ton
used
Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;
used
Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Ident No. 247238 0001 Year of construction: 2000 Axis movement: 2400 mm Carriage length: approx. 500 mm Total length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders) - Standard linear guide 65 x 25 mm - Basic profile made of steel - Ball screw 32 x 10 mm- pneumatic with position indication - permanent servo motor type: MKD071B-061-KP1-KN (Part No: 261989, S. Nr. MKD071-50234, brake with 24 Volt DC) Overall dimensions L x W x H: 3520 x 400 x 580 mm Weight: 340 kg good condition; used
used
used
3-axis welding station including 6-axis robotic arm complete with extraction hood and torch cleaning fume purification
used
Description: Table diameter: approx. 320 mm Incl. control and operation Attention: the workshop trolley shown in the photos is not included in the scope of delivery Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,000 mm, weight approx.: 500 kg
used
Description: Table diameter: 300 mm Incl. control unit with digital display Approx. Onsite Dimension. (l x w x h): 900 x 400 x 1,000 mm, weight approx.: 300 kg
used
Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 300 kg
used
Description: Round table diameter approx. 180 mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 60 kg
new
- Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Arbeitsbereich Z - Achse 400 mm -B- Achse Frässpindel ist +/- 90C parallel zu X-Achse schwenkbar - Frässpindel luftgekühlt 5,5 kw - Spindel Drehzahl stufenlos 18.000 rpm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren Delta / YASKAWA - SHIMPO Getriebe Antrieb - max. Verfahrgeschwindigkeit 40 m/min - max. Arbeitsgeschwindigkeit 20 m/min - Arbeitsgenauigkeit 0.05 mm - Vakuum - Rastertisch mit 4 Sektionen und T-Nuten - BECKER Vakuumpumpe trockenlaufend, luftgekühlt, Leistung 129 m3/h - Werkzeuglängen Sensor - CAD/CAM Software DDX EasyWOOD Standard - Steuerung OSAI - Schnittstelle Ethernet/USB/CompactFlash Card - Sicherheitslichtschranke Vorschrift nach EN 848-3 (Optional einseitig, zweiseitig oder dreiseitig je nach Aufstellungsgeg ...
used
Mazak Integrex 400Y 5 axis cnc lathe 12 inch chuck Turning length : 1500 mm Capto C6 holder Conveyor Machine can be seen in working condition
used
under current Details on request
used
Control: Sinumetrik 840D sl, operating hours: 41528h, spindle running time: 25436h. Shift utilization: 3-shift, orientation: horizontal, dimensions/travel X/Y/Z: 200mm/500mm/425mm. Tool holder/size: HSK-A63, max. spindle speed: 17500 rpm, internal coolant supply available. Tool changer available with 4x46 tool positions and pick-up process. Including: Coolant preparation: Knoll.
used
With accessories, documentation and Bar Loader FMV turbo ET 420, available in the third quarter of 2023.
used
Length: 2580mm, width: 2115mm, height: 1780mm, weight: 2.6t, with accessories, documentation and Bar Loader FMB turbo ET 420, there is another identical machine available as a source for spare parts.
used
The geminiNGM is the 5-axis CNC grinding machine for the serial production of cutting tools. Complete processing around OD and face, up to 300 mm cutting length, diameter up to 300 mm, maximum workpiece length that can be clamped 500 mm. Cutting tools such as end mills, ball nose cutters for mold making, high-performance drills, reamers and profile end mills are all part of the standard requirement. There are specific software packages, grinding processes and clamping systems for the production of shaper cutters with highly dynamic segmented hob grinding, the regrinding of gear cutting tools, end mills, shaper cutters and bevel gear cutters. CNC grinding of knives for the paper, foodstuffs and plastics industries, profile grinding, cylindrical grinding and surface grinding. Numerous accessories for the application spectrum and for increased productivity The machine is in g ...
used
A modernized Klingelnberg SNC 31 CNC 6-Axis Tool Grinding Machine. Modernizations: new belt drives, new flanges, new servo motors and new couplings in all axes. Hydraulics: new drive pump, new motor, new hydraulic hoses, original lubricant pump. Installation of a new control cabin with CNC (Siemens 840D sl) and new electrical construction (VDE). Detailed information about the modernization on request. With filter system and CO2 extinguishing system (Dangelmaier). On-site inspection is possible.
used
Mazak Integrex 100-II SY 5 axis cnc lathe Double chucks Machine can be seen in working condition Control unit Mazatrol 640 M Swing length 755 mm Turning diameter 470 mm Swing over bed 470 mm X Axis travel 360 mm Y Axis movement 60 mm Z Axis travel 785 mm C-Axis index 0.001 degrees Spindle nose A2-5 spindle speed 6000rpm Engine power 7.5 kW Tool magazine 40 positions
used
Mazak Integrex i-200 5 axis cnc lathe Machine is in good working condition Bar feeder is included 0,001 accuracy
used
DMC DL 8T 2 axis cnc lathe Fanuc control unit Swing over Bed(Max. wing dia.): 480 mm Max. Turning Dia.: 280 mm Machine is in excellent condition
used
Takisawa TS-3000 YS 5 axis cnc lathe Machine is in excellent condition
used
Mazak Integrex 200SY 5 axis cnc lathe Mazatrol Fusion 640 MT control unit Turning diameter : 540 mm Turning length: 1000 mm Tool measuring probe ATC 80 Many tools are included
used
Spinner TC400 52MC C axis CNC Lathe Siemens control unit 8 inches Machine is in good working condition
used
Mazak Integtex 200-III 5 axis simultaneous CNC Lathe 8 inch Capto 6 Holder 40 Sets Magazine Maintenance done : Chiller unit completely cleaned and maintained Capto holder draw bar system has been changed with original one Tool measuring probe has been changed
used
DMG CTX 510 Eco XZ and C axis CNC Lathe with live tools 7 live tools Working hour : 36015(Feb 2023) Control Unit : Siemens 810d shopturn Turning length : 1014 mm
used
Michael Deckel S 20 5 Axis CNC tool grinding machine Max. Wheel diameter : 150 mm Rotational speed : 1000-8000 rpm
used
5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS; Excellent
used
Capacitive: 60 kg 6 axes simultaneously controlled by Fanuc Teach-In System ; Very good
used
Capacity : 60 kgs. 6-axis simultaneously controlled by Fanuc Teach-In System ; Very good
used
5-axis controlled fraescenter Control: E 160 CNC Travel distances: X 1,050 mm Y 420 mm Z 420 mm spindle holder: ISO 40 spindle drive power: 9 kW spindle speeds: 4,000 rpm. Gear levels: 2 spindle torque: 450 Nm tool magazine positions: 15-speed pick-up magazine Zubehoer: 2-axis clamping device for parts, ISO 50; Vertical frause head ISO 40; Full cladding; tool magazine pick-up for 15 tools; SEHR WENIG USED; WORKING ONLY WITH OeL !; Excellent
used
Table size X 5300 Y 1300 mm 800 mm wide waste outfeed conveyor 2 CNC Z axes Drilling head with 21 vertical drill spindles and 4x2 horizontal drill spindles with integrated grooving saw rotatable through 90° Extraction shoe for the vertical drill spindles and chip & dust extraction of the horizontal spindles integrated in the drilling head 10 kW main spindle, vector-controlled a 3600 C axis, fully interpolating
used
Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (HSC) 12 kw max. 24.000 upm Toolchanger 6 positions HSK 63 F Total installed power 70 kw Weight approxm. 9,5 tons - Producer Intorex - Type TMC 3000 - Year of construction 2010 - Location Germany
used
Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe
used
Ref. -No.: 10022 Manufacturer: UNION Year of construction: 2001 Type of control: CNC Control: Heidenhain-Steuerung TNC 310 Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 2000 mm Machine length: 6950 mm Machine width: 4685 mm Machine Height: 3885 mm Table Height: 1050 mm Spindle Diameter: 110 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1400 x 1600 mm Faceplate speed: 5,6 - 224 RPM Spindle Speed: 5,6 - 1120 RPM Metric thread feeds: 1,25 - 56 mm Drive Capacity - Spindle Motor: 40 kW Weight Of The Machine Ca.: 25 t Bore Depth: W 800 mm Further information: with facing slide 13 inch thread feeds 1 1/8 - 28 Gg / 1 “ YOM: 1990/ Retrofit: 2001
used
Ref. -No.: 10036 Manufacturer: JOHNFORD Year of construction: 2009 Type of control: CNC Control: Fanuc Series 18i-TB Storage location: Halberstadt Country of origin: Taiwan Machine length: 9800 mm Machine width: 3695 mm Machine Height: 5292 mm Weight Of The Machine Ca.: 32,6 t amount of positions: 12 Bar passage: 165 mm Serial no.: TDF9007 Turning Length: 2000 mm Turning Diameter Over Bed: 1550 mm Swing Diameter Over Bed Slide: 1270 mm Longitudinal Travel (Z-Axis): 2000 mm Spindle Head: A2-15 Spindle Diameter In Front Bearing: 240 mm Spindle Bore: 185 mm Spindle power: 37/30 kW Cross Travel: 685 mm Spindle Speeds: 1000 RPM Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 12 m / min Tool changer: 12 Pcs
used
Technical Details: - X axis working area: 5300 mm - Y axis working area: 1300 mm - Working Table Pod and Rail - Main Electrospindle power: 9 KW - Number of controlled axes: 5 axes - Total number of drilling spindles: 32 - Total number of tool changer positions: 8
used
Ref. -No.: 10347 Manufacturer: FPT Year of construction: 2006 Type of control: CNC Control: Heidenhain 530 Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information:
used
Ref. -No.: 10350 Manufacturer: FPT Year of construction: 2012 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Italien X-Travel: 14000 mm Y-Travel: 5000 mm Z-Travel: 1500 mm W-Axis: 1000 mm Numbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kW Rotary table diameter: 3000x3000 mm Rotary table travel V: 2500 mm Rotary table max. Load: 80000 kg swivel angle: 180 ° Further information: +3D M Sensor +CNC controlled angle head: micro
used
Mori Seiki VS100 CNC Vertical Machining Center 4 axis Table dimensions : 2250 mm x 1000 mm X : 2050 mm Y : 1000 mm Z: 700 mm Max weight on table : 3000 Kg
used
just done maintenance 10 inches X-axis Turning length : 650 mm Turning diameter : 300 mm
used
Doosan Puma 280M CNC Lathe C axis Machine is in good working condition
used
Doosan PUMA 280LM CNC lathe with C axis Length . 1050 mm Chuck size : 12 inch 5 live tools(4 horizontal + 1 vertical) Machine is in good working condition
used
Smec SL 2000M CNC Lathe with c axis Machine is like new condition Machine has been used only 4 months Fanuc control unit
used
Double turret Double spindle Spindle speed : 5000 rpm Number of axis : 8 Tool capacity : 12 + 12 Spindle motor power : 22 Kw Fanuc control unit
used
Bending length: 3000 mm 135 Ton Number of axis : 9 (Y1,Y2,X,R,Z1,Z2,XZ,V,W) âWila Tool holder system Machine is in very good condition
used
Takisawa NEX-108Y CNC Lathe Y and C axis 11/7.5 Kw spindle engine Takisawa A2-6 4000 rpm spindle Chip conveyor Maximum turning length : 431,5 mm Turning diameter : 260 mm Fanuc control unit Machine is like new